* config/tc-arm.c (marked_pr_dependency, mapstate): Delete global
variables.
(mapping_state): Use the section's mapstate.
(mapping_state_2): Likewise. Skip special sections.
(s_arm_unwind_fnend): Use the section's marked_pr_dependency.
(arm_elf_change_section): Do not set deleted globals.
* config/tc-arm.h (struct arm_segment_info_type): Document
marked_pr_dependency.
gas/testsuite/
* gas/arm/mapping2.s: Test code after .ident.
* config/tc-mips.c (MIPS_JALR_HINT_P): New define. For IRIX, it is
true for new abi. For non-IRIX targets, it is always true.
(macro_build_jalr): If MIPS_JALR_HINT_P, emit BFD_RELOC_MIPS_JALR.
* binutils-all/arm/thumb2-cond.s: Use instructions instead of
.short.
gas/
* config/obj-elf.c (obj_elf_ident): Notify section change to the hook.
* config/tc-arm.c (make_mapping_symbol): New function, from
mapping_state. Save mapping symbols in the frag.
(insert_data_mapping_symbol): New.
(mapping_state): Use make_mapping_symbol, improve state transitions.
(mapping_state_2): New. Provide dummy definition.
(opcode_select): Do not call mapping_state.
(s_bss): Call md_elf_section_change_hook instead of mapping_state.
(output_inst): Update use of tc_frag_data.
(new_automatic_it_block): Call mapping_state before emitting the
IT instruction.
(md_assemble): Move mapping_state to just before outputting the
new instruction.
(arm_handle_align): Update use of tc_frag_data.
Call insert_data_mapping_symbol.
(arm_init_frag): Update use of tc_frag_data. Call
mapping_state_2.
(arm_elf_change_section): Always update the mapping symbol FSM state.
(check_mapping_symbols): New function.
(arm_adjust_symtab): Use check_mapping_symbols.
* config/tc-arm.h (struct arm_frag_type): New.
(TC_FRAG_TYPE): Change to struct arm_frag_type.
(TC_FRAG_INIT): Pass max_chars.
(arm_init_frag): Update prototype.
gas/testsuite/
* gas/arm/mapdir.d, gas/arm/mapdir.s: New files.
* gas/arm/mapping.d: Adapted to new symbols generation.
* gas/arm/mapping2.d: New test case.
* gas/arm/mapping2.s: New file.
* gas/arm/mapping3.d: New test case.
* gas/arm/mapping3.s: New file.
* gas/arm/mapping4.d: New test case.
* gas/arm/mapping4.s: New file.
* gas/arm/mapshort-eabi.d: Adapted to new symbols generation.
* gas/elf/section2.e-armeabi: Adapted to new symbols generation.
2009-07-27 Jan Beulich <jbeulich@novell.com>
* obj-elf.c (elf_file_symbol): Replace symbol name set up by
symbol_new() with the passed in, unmodified one.
gas/testsuite/
2009-07-27 Jan Beulich <jbeulich@novell.com>
* gas/elf/file.[ds]: New.
* gas/elf/elf.exp: Run new test.
* config/tc-cr16.c (md_apply_fix): Put the addend value alone in to
object file without symbol values.
(tc_gen_reloc): For local symbols resolved or its absolute symbol,
then set the relocation type as NULL.
gnu_unique_object.
* doc/as.texinfo: Document new feature of .type directive.
* NEWS: Mention support for gnu_unique_object symbol type.
* common.h (STB_GNU_UNIQUE): Define.
* NEWS: Mention the linker's support for symbols with a binding of
STB_GNU_UNIQUE.
* gas/elf/type.s: Add unique global symbol definition.
* gas/elf/type.e: Add expected readelf output for global unique
symbol.
* elfcpp.h (enum STB): Add STB_GNU_UNIQUE.
* readelf.c (get_symbol_binding): For Linux targeted files return
UNIQUE for symbols with the STB_GNU_UNIQUE binding.
* doc/binutils.texi: Document the meaning of the 'u' symbol
binding in the output of nm and objdump --syms.
* elf-bfd.h (struct elf_link_hash_entry): Add unique_global field.
* elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols
with the BSF_GNU_UNIQUE flag bit set.
* elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag
for symbols with STB_GNU_UNIQUE binding.
* elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols
with the STB_GNU_UNIQUE binding.
(elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for
symbols with STB_GNU_UNIQUE binding. Set STB_GNU_UNIQUE for
symbols with the unique_global field set.
(elf_link_output_extsym): Set unique_global field for symbols with
the STB_GNU_UNIQUE binding.
* syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit.
(bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE
symbols.
(bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE
symbols.
* bfd-in2.h: Regenerate.
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* config/tc-i386.c (i386_align_code): Tune for 32bit nops in
64bit.
(i386_target_format): Set cpu_arch_isa_flags.bitfield.cpulm
for 64bit.
gas/testsuite/
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* gas/i386/i386.exp: Run x86-64-nops-1-pentium.
* gas/i386/x86-64-nops-1-pentium.d: New.
* config/tc-i386.c (md_assemble): Update operand types.
(update_imm): Updated.
(finalize_imm): Update the first 2 immediate operands only
for instructions with 2 operands or more.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define in terms of
MAX_MEM_ALIGNMENT_BYTES.
* config/tc-arm.c (arm_frag_align_code): Replace hard coded
constant with MAX_MEM_FOR_RS_ALIGN_CODE.
* gas/arm/align64.s: New test case.
* gas/arm/align64.d: Expected disassembly.
* config/tc-arm.c (md_assemble): Added validation.
gas/testsuite
* gas/arm/thumb-w-bad.d: New test case.
* gas/arm/thumb-w-bad.l: New file.
* gas/arm/thumb-w-bad.s: New file.
* gas/arm/thumb-w-good.d: New test case.
* gas/arm/thumb-w-good.s: New file.
(set_it_insn_type_nonvoid): New macro.
(emit_thumb32_expr): New function.
(thumb_insn_size): New function.
(emit_insn): New function.
(s_arm_elf_inst): New function.
(md_pseudo_table): New pseudo-opcode entries added.
* doc/c-arm.texi: New directive added.
* gas/arm/inst-po.d: New testcase.
* gas/arm/inst-po.s: New file.
* gas/arm/inst-po-2.d: New testcase.
* gas/arm/inst-po-2.s: New file.
* gas/arm/inst-po-2.l: New file.
* gas/arm/inst-po-3.d: New testcase.
* gas/arm/inst-po-3.s: New file.
* gas/arm/inst-po-be.d: New testcase.
32 bits for relaxable branches so that we can relax them later.
(md_estimate_size_before_relax): Assume IVC2 branches will be relaxed.
(mep_relax_frag): New.
(md_convert_frag): Relax IVC2 branches in-place.
* config/tc-mep.h ((mep_relax_frag): New.
(implicit_it_mode): New global.
(it_instruction_type): New enum.
(arm_parse_it_mode): New function.
(arm_long_opts): New option added.
(arm_it): New field.
(it_state): New enum.
(now_it): New macro.
(check_it_blocks_finished): New function.
(insns[]): Use the IT Thumb opcodes for ARM too.
(arm_cleanup): Call check_it_blocks_finished.
(now_it_compatible): New function.
(conditional_insn): New function.
(set_it_insn_type): New macro.
(set_it_insn_type_last): New macro.
(do_it): Call automatic IT machinery functions.
(do_t_add_sub): Likewise
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_blx): Likewise.
(do_t_branch): Likewise.
(do_t_bkpt): Likewise.
(do_t_branch23): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_cps): Likewise.
(do_t_cpsi): Likewise.
(do_t_cbz): Likewise.
(do_t_it): Likewise.
(encode_thumb2_ldmstm): Likewise.
(do_t_ldst): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mul): Likewise.
(do_t_neg): Likewise.
(do_t_setend): Likewise.
(do_t_shift): Likewise.
(do_t_tb): Likewise.
(output_it_inst): New function.
(new_automatic_it_block): New function.
(close_automatic_it_block): New function.
(now_it_add_mask): New function.
(it_fsm_pre_encode): New function.
(handle_it_state): New function.
(it_fsm_post_encode): New function.
(force_automatic_it_block_close): New function.
(in_it_block): New function.
(md_assemble): Call automatic IT block machinery functions.
(arm_frob_label): Likewise.
(arm_opts): New element.
* config/tc-arm.h (it_state): New enum.
(current_it): New struct.
(arm_segment_info_type): New member added.
* doc/c-arm.texi: New option -mimplicit-it documented.
* gas/arm/arm-it-auto.d: New test.
* gas/arm/arm-it-auto.s: New file.
* gas/arm/arm-it-auto-2.d: New test case.
* gas/arm/arm-it-auto-2.s: New file.
* gas/arm/arm-it-auto-3.d: New test case.
* gas/arm/arm-it-auto-3.s: New file.
* gas/arm/arm-it-bad.d: New test case.
* gas/arm/arm-it-bad.l: New file.
* gas/arm/arm-it-bad.s: New file.
* gas/arm/arm-it-bad-2.d: New test case.
* gas/arm/arm-it-bad-2.l: New file.
* gas/arm/arm-it-bad-2.s: New file.
* gas/arm/arm-it-bad-3.d: New test case.
* gas/arm/arm-it-bad-3.l: New file.
* gas/arm/arm-it-bad-3.s: New file.
* gas/arm/thumb2_it_auto.d: New test.
* gas/arm/thumb2_it_bad.l: Error message updated.
* gas/arm/thumb2_it_bad_auto.d: New test.
* gas/arm/thumb2_it.d: Comment added.
* gas/arm/thumb2_it_bad.d: Comment added.
