CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
found by test suite during function calls, which attempts to write
unwritable registers.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
comment.
* gdbtypes.h, gdbtypes.c: Use const in decl of
cplus_struct_default, now that pa-gas assembler has been fixed.
* hppah-nat.c: Formatting.
* hppah-tdep.c: Remove lots of useless externs for variables we
don't use.
* (find_unwind_entry): Speed up by using binary search, and a one
entry cache.
* (rp_saved): New routine to see what unwind info says about RP
being saved on the stack frame.
* (frame_saved_pc): Look for prologue to see if we need to
examine the stack for the saved RP or not.
* (init_extra_frame_info): Check for prologue, instead of
framesize to determine if we are frameless or not.
* (frame_chain_valid): Stop backtraces when we run into _start.
* (push_dummy_frame): Reformat to make more readable.
* (find_dummy_frame_regs): ditto.
* (hp_pop_frame): ditto.
* (hp_restore_pc_queue): small cleanup.
* (hp_push_arguments): ditto.
* (pa_do_registers_info): ditto.
* (skip_prologue): New routine created from SKIP_PROLOGUE macro.
* tm-hppa.h: Move contents of SKIP_PROLOGUE into hppah-tdep.c.
* Define FRAME_CHAIN_VALID.
* Turn on BELIEVE_PCC_PROMOTION so that we can access char args
passed to functions.
* paread.c (pa_symtab_read): Use new bfd conventions for
accessing linker symbol table.
* (pa_symfile_init): Access embedded STAB info via BFD section
mechanism and related macros.
branch targets to compute target address using const from previous
instruction if necessary.
* Add `Q' operator to print out bit position field various
instructions.
* hppah-nat.c: #include sys/param.h, and sys/user.h. General
cleanups, use new code from Utah.
* (store_inferior_registers): Update to new code from Utah.
* (initialize_kernel_u_addr): Re-enable decl of struct user u.
* (fetch_register): Clear out priv level when reading PCs.
* hppah-tdep.c: Get rid of gobs of KERNELDEBUG stuff.
* Remove decl of errno, #include wait.h and target.h.
* (frame_saved_pc): Check `flags' pseudo-register to see if we
were inside of a kernel call. If so, then PC is in a different
register. Also, mask out bottom two bits of all PCs so as not to
confuse higher level code.
* (push_dummy_frame): Create from #define in tm-hppa.h.
* (find_dummy_frame_regs): Update from Utah.
* (hp_pop_frame): Create from #define in tm-hppa.h.
* (hp_restore_pc_queue): New, from Utah.
* (hp_push_arguments): Big fixes from Utah.
* (pa_do_registers_info, pa_print_registers): Only print out fp
regs upon request.
* (skip_trampoline_code): New routine to deal with stubs that
live in nowhereland between callers and callees.
* i860-tdep.c: Remove decl of attach_flag.
* infrun.c (wait_for_inferior): Add new macro
INSTRUCTION_NULLIFIED, which can tell if the instruction pointed
at by PC will be nullified. If so, then step the target once more
so as to avoid confusing the user.
* (just before step_over_function:): Use stop_func_start, not
stop_pc when checking for the existance of line number info.
stop_func_start will reflect the proper address of the target
routine, not of the stub that we may be traversing to get there.
* tm-hppa.h: define SKIP_TRAMPOLINE_CODE and IN_SOLIB_TRAMPOLINE
to deal with the stubs that PA compilers sometimes stick between
callers and callees. Also, define FLAGS_REGNUM for access to the
`flags' pseudo-reg.
* (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use
memcpy, not bcopy.
* (CANNOT_STORE_REGISTER): New from Utah. Says that we can't
write gr0, PC regs, and PSW!
* (FRAME_FIND_SAVED_REGS): Bug fixes from Utah.
* (PUSH_DUMMY_FRAME, POP_FRAME): Make into real routines in
hppah-nat.c.
* (CALL_DUMMY, FIX_CALL_DUMMY): Fixes from Utah.
* Define struct unwind_table_entry.
* valops.c (call_function_by_hand): Add another arg to
FIX_CALL_DUMMY (under #ifdef GDB_TARGET_IS_HPPA). Why is this
necessary?
decl for attach_flag, it now lives in inferior.h.
* hppa-pinsn.c: Reformat opcode tables. Add function prototypes.
Make most functions static.
* hppah-nat.c: General cleanups, remove BSD specific code (since
that all lives in hppab-nat.c).
* hppah-tdep.c (frame_chain_valid), tm-hppa.h (FRAME_CHAIN):
Change sense of test against inside_entry_file(). This fix is
from U. of Utah.
* tm-hppa.h (PUSH_DUMMY_FRAME, POP_FRAME): Use char * for 2nd arg
to read/write_register_bytes().
