* c-exp.y, m2-exp.y (YYDEBUG): Define if MAINTENANCE_CMDS is defined
and YYDEBUG is not already defined.
* c-exp.y (strncmp): Replace throughout with STREQN, missed
them during the previous replacements.
* printcmd.c (_initialize_printcmd): Update internal documentation
for "set" command to note that the assignment syntax is language
dependent.
**** start-sanitize-chill ****
* ch-exp.y (yyreds, yytoks): Remap like other yy* names.
* ch-exp.y (YYDEBUG): Define if MAINTENANCE_CMDS is defined
and YYDEBUG is not already defined.
* ch-exp.y (GDB_REGNAME, GDB_LAST, GDB_VARIABLE, GDB_ASSIGNMENT,
single_assignment_action): New terminals and nonterminal for gdb
extensions to chill expression grammer.
* ch-exp.y (match_dollar_tokens): Lexer routine to match all
tokens that start with '$' (register names, convenience vars, etc).
* ch-exp.y (tokentab2): Add GDB_ASSIGNMENT.
* ch-exp.y (yylex): Call match_dollar_tokens.
**** end-sanitize-chill ****
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
* build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
(all-cygnus, native, build-cygnus): Make
$(canonhost)-stamp-3stage-done, not $(host)....
* test-build.mk (stamp-3stage-compared): Use tail +10c for
i386-sco3.2v4. Added else true to if command.
* coffcode.h (coff_real_object_p): use name I386AIXMAGIC rather
than I386SVMAGIC.
(coff_pointerize_aux): don't pointerize a negative tagndx
(sometimes generated by SCO 3.2v4 cc).
* bout.c (calljx_callback, callj_callback,
b_out_get_relocated_section_contents): warn if relocating against
an undefined symbol.
accessing minimal symbol data.
* infcmd.c (read_pc): Use #ifdef, not #if.
* symfile.c (syms_from_objfile): Add CONST to decl for targets.
* tm-hppa.h (FIX_CALL_DUMMY): Use new macros for accessing
minimal symbol data.
frame. Use find_return_regnum to find the caller.
* (find_unwind_entry): New routine to locate stack frame info
associated with a procedure. This looks in the $UNWIND_START$
section in the SOM file.
* (find_return_regnum): New routine. Uses find_unwind_entry() to
figure out where the caller's return address is stored.
* (find_proc_framesize): New routine. Uses find_unwind_entry()
to figure out the frame size for a procedure.
* (saved_pc_after_call): New routine, moved from tm-hppa.h.
* (init_extra_frame_info): New routine. Corrects PC and FP for
outermost frame if necessary.
* (frame_chain): New routine, moved from tm-hppa.h.
* (skip_trampoline_code): Handle computed function calls (ie:
calls from $$dyncall).
* (unwind_command): Temporary support function to allow user
to control/observe aspects of the unwind (stack frame) info.
* infcmd.c (read_pc): (Temporary), put a hack in to see if the PC
was in a system call, if so, then read the PC from r31.
* tm-hppah.h (SKIP_TRAMPOLINE_CODE, IN_SOLIB_TRAMPOLINE): Deal
with extra arg for skip_trampoline_code().
* (INIT_EXTRA_FRAME_INFO): Define to point at subr (see above).
* (FRAME_CHAIN, FRAME_CHAIN_VALID): Turn into real subroutines.
* tm-hppa.h (SAVED_PC_AFTER_CALL): Turn into real subroutine.
Make a bunch more routines be static.
* hppa.c (fill_spaces): Get rid of this, replace with much better
written setup_sections().
* (setup_sections): New routine to create BFD sections for each
space and subspace in SOM files.
* (hppa_object_setup): Use BFD sections created by
setup_sections() to locate GDB symbol table info.
* (make_unique_section): New routine to create a BFD section. It
ensures that the given name is unique, and will generate a unique
one if necessary.
* (hppa_object_p): Become much more paranoid about file header.
* (make_bfd_asection): Call bfd_make_section to do the dirty
work. Simplify code somewhat.
* (hppa_core_file_p): Use proper name for stack section.
* libhppa.h: Remove millicode_start, millicode_end decls.
* m68kcoff.sc-sh: define _end as well as end, for consistency with
aout.sc-sh.
* configure.in: accept *-ericsson-ose for any m68k CPU.
* ldwrite.c (write_rel): don't always set SEC_HAS_CONTENTS flag
for each output section.
on the possible size of any object in a bfd.
* elf.c (bfd_elf_find_section, elf_get_str_section,
elf_get_symtab_upper_bound): Rewrite to avoid NULL pointer
dereferences.
* elf.c (elf_big_vec, elf_little_vec): Document last three
members initialized to NULL.
Call new bfd_get_size() and verify that string table is no larger
than the file that is supposed to contain it.
* symfile.c (syms_from_objfile): Only complain about configured
NAMES_HAVE_UNDERSCORE differences between gdb and bfd if the
current target is the default BFD target.
* solib.c (bkpt_names): New array of symbol names to try to
use for the "mapping complete" breakpoint. Configurable
define SOLIB_BKPT_NAME is first one to try.
* solib.c (find_solib): Test debug_base for nonzero rather
than just greater than zero.
* solib.c (enable_break): Use bkpt_names to look up address
at which to set "mapping complete" breakpoint.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
* Makefile.in (distclean): Remove sysdep.h.
* size.c: Use %u format where appropriate.
* objdump.c: Standardize: L_SET -> SEEK_SET.
* objdump.c: Use new macro bfd_asymbol_bfd.
* configure.in: Allow std-host as the default ${mys_host}.
macro bfd_asymbol_bfd as appropriate.
* Makefile.in: Un-duplicate ldlex.c dependency.
* condigure.in: Replace my_host case table by sourcing
../bfd/configure.host. Allow std-host as the default.
* ldmisc.c: Change logic for C++ name demangling: There is
no initial '_' to remove from stab-derived function names.
perhaps we can later remove the the_bfd field from each symbol.
* syms.c (struct symbol_cache_entry): Remove unused field
app_data. Add comment noting that the_bfd is almost redundant,
but not quite.
* aoutx.h, coff-a29k.c, coff-i386.c, coff-i960.c, coffcode.h:
Use new macros bfd_asymbol_bfd and bfd_asymbol_flavour.
* hppa.c (fill_spaces): Make slightly more rebust.
* configure.in: Allow std-host as the "default" host.
about dependency on target byte ordering.
**** start-sanitize-chill ****
* ch-exp.y (value_array_slice): Fix typo.
* ch-valprint.c (chill_val_print): Remove C'ism that arrays of
byte sized ints are assumed to be char strings and printed with
string syntax. In chill, arrays of chars and arrays of
bytes/ubytes are distinquishable, and printed appropriately.
**** end-sanitize-chill ****