tcp_retry_limit is installed as variable of an unsigned command:
add_setshow_uinteger_cmd ("connect-timeout", class_obscure,
&tcp_retry_limit, _("\
and I found no uses of the variable treating it as signed (like < 0
checks or some such).
2013-03-07 Pedro Alves <palves@redhat.com>
* ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
Move the declarations to a header, rather than declaring them in
(multiple) .c files.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
* tracepoint.c (cur_action, cur_step_action): Make them unsigned.
(cmd_qtfp): Initialize cur_action and cur_step_action 0 instead
of -1.
(cmd_qtsp): Adjust condition. Do post increment.
Set cur_action and cur_step_action back to 0.
PROBLEM:
The function linux_write_memory () in linux-low.c allocates a buffer
on the stack to hold a copy of the data to be written.
register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *)
alloca (count * sizeof (PTRACE_XFER_TYPE));
"count" is the number of bytes to be written, rounded up to the
nearest multiple of sizeof (PTRACE_XFER_TYPE) and allowing for not
being an aligned address. The function later uses
buffer[0] = ptrace (PTRACE_PEEKTEXT, pid,
(PTRACE_ARG3_TYPE) (uintptr_t) addr, 0);
The problem is that this function can be called to write zero bytes on
an aligned address, for example when receiving an X packet of length 0
(used to test if 8-bit write is supported). Under these circumstances,
count can be zero.
Since in this case, buffer[0] may never have been allocated, the stack
is corrupted and gdbserver may crash.
SOLUTION:
Writing zero bytes should always succeed. The patch below returns
successfully early if the length is zero, so avoiding the stack
corruption.
Verified on the ARC GDB 7.5.1 port.
2013-03-07 Jeremy Bennett <jeremy.bennett@embecosm.com>
PR server/15236
* linux-low.c (linux_write_memory): Return early success if LEN is
zero.
The strlen in this function looked suspicious, for the function
documents that STR is in the target's charset (what if it is utf-32,
etc.).
On closer inspection, nothing is calling the function, and it's been
that way ever since the function was added.
gdb/
2013-03-06 Pedro Alves <palves@redhat.com>
* python/py-utils.c (target_string_to_unicode): Delete function.
* python/python-internal.h (target_string_to_unicode): Delete
declaration.
The current tstatus.exp tests shows PASSes if either the target
support or not the optional tstatus bits:
PASS: gdb.trace/tstatus.exp: tstatus does not report trace stop reason
PASS: gdb.trace/tstatus.exp: tstatus reports trace stop reason
The former (and any other similar case) should be UNSUPPORTED rather
than PASS. That'd make it much easier to spot actually problems with
the test (e.g., the one Yao's previous patch addressed), along with
regressions and progressions.
The "not supported" paths in tstatus.exp explicitly check for output
you'd get if the feature wasn't supported, so real unexpected failures
will still be caught as FAILs.
So now e.g., where we wanted to check if tstatus reports the trace
stop reason, and if the target does support it, we get
PASS: tstatus reports trace stop reason
if the target actually reports what we'd expect if the trace stop
reason isn't supported, we get:
UNSUPPORTED: tstatus reports trace stop reason
and if the target reports something else unexpected, we get:
FAIL: tstatus reports trace stop reason
That has the added bonus that the test string is always the same and
only the test results change (PASS/FAIL/UNSUPPORTED), which makes it
easier for testers see regressions, compared to the previous:
-PASS: gdb.trace/tstatus.exp: tstatus reports trace stop reason
+PASS: gdb.trace/tstatus.exp: tstatus does not report trace stop reason
which clearly easily goes by unnoticed, as evidenced by the existing
problem Yao's previous patch addressed.
Tested on x86_64 Fedora 17.
gdb/testsuite/
2013-03-06 Pedro Alves <palves@redhat.com>
* gdb.trace/tstatus.exp (run_trace_experiment): When the target
doesn't support the tested optional feature, call "unsupported"
with the same test message as the "pass" case, instead of calling
"pass" with a different message. Use the same text for the "fail"
cases too.
* gdb.trace/tstatus.exp: Remove the invocation of
gdb_load_shlibs, gdb_compile, clean_restart and runto_main.
(test_tracepoints): Don't set fast tracepoint.
(top level): Don't check agent library is loaded or not.
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
parameter VAR's type from "unsigned int" to "int".
* command.h (var_zuinteger_unlimited): Update its comments.
(add_setshow_zuinteger_unlimited_cmd): Update the declaration.
* linespec.c (struct linespec_canonical_name): New.
(struct linespec_state): Change canonical_names type to it.
(add_sal_to_sals): Change variable canonical_name to canonical. Change
xrealloc element size. Initialize the different CANONICAL fields.
(canonical_to_fullform): New.
(filter_results): Use it. Add variables canonical, fullform and
cleanup.
(struct decode_line_2_item, decode_line_2_compare_items): New.
(decode_line_2): Remove variables iter and item_names, add variables
items and items_count. Modify the code for these new variables.
gdb/testsuite/
* gdb.linespec/base/one/thefile.cc (twodup): New.
(m): Call it.
* gdb.linespec/base/two/thefile.cc (dupname): New.
(n): Call it.
* gdb.linespec/break-ask.exp: New file.
* gdb.linespec/lspec.cc (body_elsewhere): New comment marker.
gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
printf-like functions to avoid type related warnings on all
platforms.
(get_child_debug_event): Print dwDebugEventCode as hex since
that's how it's usually documented.
* gdb.trace/report.exp: Move some code to ...
(use_collected_data): New.
(top level): Call use_collected_data once on the live target.
Save at file of the current trace session, load it with target
tfile, and call use_collected_data again.
printf-like functions to avoid type related warnings on all
platforms.
(handle_output_debug_string): Fetch context information address
from debug string using string_to_core_addr.
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.
gdbserver/
* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function. Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function. The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.
2013-02-27 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_trace_find): For tfind
pc/tp/range/outside, look for the next trace frame instead of
always starting from frame 0.
The "you have broken" bit of this text reads to me as if I had broken
it myself somehow. This patch eliminates that ambiguity.
2013-02-25 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
warning text.
symbol size.
* ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
* ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
* ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
* ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
Code cleanup.
* elfread.c (build_id_bfd_get): Make the return type const.
(build_id_verify): Make the check parameter const.
(build_id_to_debug_filename): Make the build_id parameter and variable
data const.
(find_separate_debug_file_by_buildid): Make the variable build_id const.
(Values From Inferior, Types In Python, Inferiors In Python)
(Events In Python, Threads In Python, Frames In Python, Blocks In
Python, Symbols In Python, Symbol Tables In Python): Remove
@tables.
(Packets, General Query Packets, Tracepoint Packets)
(Host I/O Packets): Use @w{} for empty @item.
* python/py-arch.c (archpy_disassmble): Implementation of the
new method gdb.Architecture.disassemble.
(arch_object_methods): Add entry for the new method.
* doc/gdb.texinfo (Architectures In Python): Add description
about the new method gdb.Architecture.disassemble.
* testsuite/gdb.python/py-arch.c: New test case
* testsuite/gdb.python/py-arch.exp: New tests to test
gdb.Architecture.disassemble
* testsuite/gdb.python/Makefile.in: Add py-arch to the list of
EXECUTABLES.
Addresses, as most numbers in the RSP are hex encoded, with variable
length (that just means the width isn't specified, and there's no top
cap. So they should be extracted with unpack_varlen_hex.
A couple spots in server.c are using strto(u)l, which doesn't work on
LLP64 targets.
This patch fixes it.
Tested on x86_64 Fedora 17.
2013-02-19 Pedro Alves <palves@redhat.com>
Kai Tietz <ktietz@redhat.com>
PR gdb/15161
* server.c (handle_query) <CRC check>: Use unpack_varlen_hex
instead of strtoul to extract address from packet.
(process_serial_event) <'z'>: Likewise.
While touching monitor_load in a previous patch, I noticed this method
is no longer set to anything other than NULL in the tree, so we can
remove it.
Tested by building with --enable-targets=all.
2013-02-19 Pedro Alves <palves@redhat.com>
Garbage collect 'struct monitor_ops'::load_routine.
* monitor.h (struct monitor_ops) <load_routine>: Remove field.
* monitor.c (monitor_load): No longer call
current_monitor->load_routine.
* dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
* m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
* ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
Harmonize this old-looking code with generic_load, which fixes several
issues.
2013-02-19 Pedro Alves <palves@redhat.com>
PR gdb/15161
Harmonize with generic_load.
* monitor.c: Include "readline/readline.h".
(monitor_load): Rename parameter 'file' to 'args'. Use build_argv
instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
long/strtol for the 'load_offset' local. Error out if no argument
is given or if too many arguments are given. Tilde expand the
passed in file name.
* symfile.c (load_section_data): Change type of load_offset
to CORE_ADDR.
(generic_load): User strtoulst instead of strtoul for conversion
of load_offset.
(tilegx_write_pc): New function.
(tilegx_cannot_reference_register): Return zero if REGNO
is TILEGX_FAULTNUM_REGNUM.
(tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
(tilegx_register_name): Add handling of "faultnum" register.
* tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
* tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
handling of TILEGX_FAULTNUM_REGNUM.
* tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
