* fork-child.c (fork_inferior): Add call to
TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
control just before the new process executes it's first instruction.
* remote-mips.c (mips_initialize): Cleanup a bit. Don't try to
receive a packet at first. This speeds up initialization a lot.
Use TARGET_MONITOR_PROMPT instead of "<IDT>".
(common_breakpoint): Use rresponse instead of rerrflg to inspect
error code.
* symfile.c (syms_from_objfile reread_symbols): Call
TARGET_SYMFILE_POSTREAD to allow target specific code to get
control after reading new symbols.
* target.h: New macros TARGET_SYMFILE_POSTREAD, and
TARGET_CREATE_INFERIOR_HOOK. See above for descriptions.
* config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make
NAT_FILE point directly at ../nm-m3.h.
* config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/nm-mips.h: Improve comment at top of file.
* config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change
definition into a proper string.
start-sanitize-gm
* configure configure.in: Add support for --enable-gm.
(mips*-*-magic*): Change target from magic to idt.
* eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
* magic.c magic.h: Update files from GM.
* config/mips/magic.mt: Delete. No longer necessary now that we
use --enable mechanism.
* config/mips/tm-idt.h: Add GM stuff needed for remote GM box.
* config/mips/tm-irix5.h: Add GM stuff needed for native Irix box.
* config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all
platform specific stuff into tm-irix.h and tm-idt.h. Add defs for
TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
end-sanitize-gm
call it instead of doing normal loop.
* infcmd.c (attach_command): Don't call wait_for_inferior if
running Mach 3.
* infrun.c (proceed) [PREPARE_TO_PROCEED]: If defined, call
hook that can decide whether to step over the next breakpoint.
* utils.c (wrap_here): Abort if wrap_buffer not allocated.
(request_quit) [REQUEST_QUIT]: If defined, call it instead of
doing normal quit.
* Makefile.in (stop-gdb): New target.
* stop-gdb.c: New file, utility to get attention of waiting GDBs
in Mach 3.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
gone now.
* c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
remote-utils.c, stabsread.c: Include <string.h>.
* regex.c: Include "defs.h", change re_comp argument to const char *.
* infptrace.c (fetch_register, store_inferior_registers): Change
regaddr to type CORE_ADDR.
* config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
* procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
m3-nat.c (m3_create_inferior): Pass it.
* procfs.c: Remove ptrace function. It was declared in a way which
conflicted with the prototype in unistd.h on Solaris.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
target_terminal_ours_for_output before attempting output.
* fork-child.c (fork_inferior): Fix comment so that it suggests
"set shell" rather than having "set env SHELL" affect GDB's
operation.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
* inflow.c, ser-unix.c, ser-go32.c, ser-tcp.c, serial.h,
terminal.h, fork-child.c, main.c, utils.c: Move all the process
group stuff back to inflow.c and terminal.h; that's a better place
for it and fixes problems with trying to get/set the process group
of a tty we're doing remote debugging on.
* terminal.h: Skip the redefines and includes if HAVE_TERMIOS.
and target_terminal_inferior until we are sure that the inferior
has called gdb_setpgid. This fixes PR 2900 (Schauer tracked it
down and was able to reliably reproduce it by putting a sleep()
before the gdb_setpgid()).
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
* signals.h: Don't undefine signals anymore.
* main.c: Use job_control from serial.h.
* fork-child.c (fork_inferior): Use gdb_setpgid.
* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
* utils.c (quit): Use current_target->to_terminal_ours to figure
out whether we care about lack of job control, rather than __GO32__.
* utils.c: Include serial.h not terminal.h
(quit): Use job_control not TIOCGPGRP.
* terminal.h: Don't undefine TIOCGPGRP.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
* utils.c (quit): Use it.
* serial.h: Add SERIAL_UN_FDOPEN.
* utils.c (quit): Use it.
* ser-unix.c: Add process group to ttystate.
[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
* inflow.c: Include serial.h not terminal.h.
Use serial.h stuff to replace most of the maze of #ifdef's.
* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
SERIAL_SET_PROCESS_GROUP.
* inflow.c: Use them.
* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
Define HAVE_TERMIOS.
* Various: Remove all use of TIOC*_BROKEN.
* inferior.h (proc_wait, inferior_proc_init, proc_set_exec_trap):
No longer global functions.
(fork_inferior): New global function from fork-child.c.
* inftarg.c (child_wait): Remove USE_PROC_FS conditional.
(ptrace_me, ptrace_him): New stub functions for fork_inferior().
(child_create_inferior): Moved to fork-child.c as fork_inferior.
(child_create_inferior): New tiny function that calls fork_inferior.
* fork-child.c: New file, containing fork_inferior, which is
built from slight mods to inftarg.c's child_create_inferior.
* procfs.c (procfs_ops): Add target vector.
(attach): Rename as static do_attach.
(procfs_create_inferior): New tiny function that calls fork_inferior.
(child_xfer_memory): Rename to static procfs_xfer_memory.
(store_inferior_registers): Rename to static procfs_store_registers.
(inferior_proc_init): Rename to static procfs_init_inferior.
(procfs_attach, procfs_detach, procfs_prepare_to_store,
procfs_files_info, procfs_open, procfs_mourn_inferior,
procfs_can_run): Slightly mangled copies of the corresponding
child_XXX routines from inftarg.c.
(proc_wait): Renamed to static procfs_wait.
(child_resume): Rename to static procfs_resume.
(fetch_inferior_registers): Rename to static procfs_fetch_registers.
(initialize_proc_fs): Rename to initialize_procfs. Set up
procfs_ops, too.
* xm-irix4.h, xm-sysv4.h (CREATE_INFERIOR_HOOK): No longer needed.
