(ignore_section_sym): New function.
(elf_map_symbols): Use ignore_section_sym to discard some syms.
(_bfd_elf_symbol_from_bfd_symbol): Ensure section belongs to
bfd before using elf_section_syms.
instead of _GLOBAL_OFFSET_TABLE_.
(bfin_relocate_section): Ditto.
(_bfin_create_got_section): Ditto.
(elf32_bfinfdpic_create_dynamic_sections): Use
__PROCEDURE_LINKAGE_TABLE_ instead of _PROCEDURE_LINKAGE_TABLE_.
(bfin_finish_dynamic_symbol): Use __DYNAMIC instead of _DYNAMIC.
* elflink.c (_bfd_elf_add_dynamic_entry): Remove DT_TEXTREL
check.
(bfd_elf_final_link): Add a late DT_TEXTREL check.
* elfxx-mips.c (MIPS_ELF_READONLY_SECTION): Define.
(mips_elf_create_dynamic_relocation): Set DF_TEXTREL.
(_bfd_mips_elf_check_relocs): Delete MIPS_READONLY_SECTION.
Use MIPS_ELF_READONLY_SECTION.
(_bfd_mips_elf_size_dynamic_sections): Clear DF_TEXTREL after
creating DT_TEXTREL.
(_bfd_mips_elf_finish_dynamic_sections): Clear textrel markers
if no text relocations were generated.
ld/testsuite/
* ld-mips-elf/textrel-1.d: Relax some patterns.
(assign_file_positions_for_load_sections): Only add SEC_ALLOC
sections to p_memsz. Remove hack for PT_NOTE sections. Allow
section alignment to increase p_align for PT_LOAD.
(assign_file_positions_for_non_load_sections): Remove ARM BPABI
hack for PT_DYNAMIC. Instead, set p_filesz for all segments
other than PT_LOAD, and PT_NOTE in core.
* elf32-xtensa.c (check_loop_aligned): Fix reversed check for
undefined opcode. Clean up assertions.
(narrow_instruction, widen_instruction): Remove "do_it" parameters.
Factor most of the code into separate functions....
(can_narrow_instruction, can_widen_instruction): New.
(prev_instr_is_a_loop): New.
(compute_ebb_proposed_actions): Combine error handling code for
decode errors. Replace call to insn_decode_len with inline code.
Use can_narrow_instruction and can_widen_instruction. Handle errors
from call to xtensa_opcode_is_loop.
(relax_section): Adjust calls to narrow_instruction and
widen_instruction.
gas:
* config/tc-xtensa.c (is_direct_call_opcode, is_branch_jmp_to_next,
xg_assemble_vliw_tokens, xtensa_mark_narrow_branches,
xtensa_fix_short_loop_frags, is_local_forward_loop, relax_frag_immed):
Handle errors from calls to xtensa_opcode_is_* functions.
* elfcode.h (valid_section_index_p): New function: Checks for a valid section
index. Allows indicies in the range SHN_LOPROC to SHN_HIOS.
(elf_object_p): Use valid_section_index_p.
symbols which are not going to be placed into the symbol table.
* coffcode.h (coff_write_relocs): Produce an error message if a an
out-of-range symbol index is detected in a reloc.
(elf_s390_relocate_section): Add code to do the GD->LE and
LD->LE TLS linker optimizations if a brasl instruction is used
for the __tls_get_offset function call.
* elf64-s390.c (invalid_tls_insn): Call bfd_set_error.
R_PPC64_TPREL64 and R_PPC64_DTPMOD64 relocs when they are in
the .toc and referenced by a TLS code sequence.
(ppc64_elf_edit_toc): Cater for the unlikely situation that
.toc is the first section in a file.
regs instead of an array of int.
(struct external_solaris_bcp_core): Likewise.
(swapcore_sun3): Use offsetof instead of computing the offset
manually.
(swapcore_sparc): Likewise. Simplify reference to c_regs.
(swapcore_solaris_bcp): Likewise.
(higher_prime_number): Correct test for no larger prime. Don't
abort on error, instead return 0. Depopulate primes[].
(bfd_hash_lookup): If we overflow size, refuse to grow table.
* tekhex.c (getvalue): Change return type to bfd_boolean and
add the new parameter. Return false if the unexpected character
is found.
(getsym): Likewise.
(first_phase): Change return type to bfd_boolean and return
false if the unexpected character is found. Replace abort
with returning false.
(pass_over): Change return type to bfd_boolean and the type of
the second argument to bfd_boolean (*) (bfd *, int, char *).
Return false if FUNC returns false.
(tekhex_object_p): Return NULL if pass_over fails.
PR binutils/2593
* elf.c (_bfd_elf_new_section_hook): Don't set section ELF type
and flags if its BFD flags have been set.
(_bfd_elf_init_private_section_data): Don't copy the output ELF
section type from input if it has been set to something
different.
* elfcode.h (elf_object_p): Allow files with corrupt e_shstrndx fields to
still be handled as ELF files.
* readelf.c (SECTION_NAME): Cope with a missing string table.
(process_file_header): Cope with a corrupt e_shstrndx field.
(process_section_headers): Correctly handle an e_shstrndx value of SHF_UNDEF.
(compute_text_actions): Use it to decode opcodes outside inner loop.
(check_section_ebb_pcrels_fit): Add "reloc_opcodes" argument, and if
it is set, use it to get the opcodes for relocations.
(move_shared_literal): Adjust call to check_section_ebb_pcrels_fit.
PR ld/2513
* elf32-i386.c (GOT_TLS_MASK): New macro for tls_type.
(GOT_TLS_IE_IE): Likewise.
(GOT_TLS_IE_GD): Likewise.
(GOT_TLS_IE_MASK): Likewise.
(elf_i386_check_relocs): For global symbols, set GOT_TLS_IE_GD
and GOT_TLS_IE_IE for R_386_TLS_GD and R_386_TLS_IE
respectively.
(allocate_dynrelocs): If both GOT_TLS_IE_IE and GOT_TLS_IE_GD
are set, treat tls_type as GOT_TLS_IE_BOTH.
(elf_i386_relocate_section): Likewise.
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* elfxx-ia64.c (elfNN_ia64_relax_section): Skip unneeded passes
with the skip_relax_pass_0 and skip_relax_pass_1 bits in the
section structure.
include/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_link_info): Replace need_relax_finalize with
relax_pass.
ld/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/ia64elf.em: Set link_info.relax_pass to 2. Remove
link_info.need_relax_finalize.
* ldlang.c (relax_sections): New.
(lang_process): Use. Call relax_sections link_info.relax_pass
times.
* ldmain.c (main): Set link_info.relax_pass to 1. Remove
link_info.need_relax_finalize.
James E Wilson <wilson@specifixinc.com>
PR ld/2442
* elfxx-ia64.c (elfNN_ia64_dyn_sym_info): Remove next.
(elfNN_ia64_local_hash_entry): Add count, sorted_count and
size.
(elfNN_ia64_link_hash_entry): Likewise.
(elfNN_ia64_new_elf_hash_entry): Initialize count, sorted_count
and size.
(elfNN_ia64_hash_copy_indirect): Updated elfNN_ia64_dyn_sym_info
processing.
(elfNN_ia64_hash_hide_symbol): Likewise.
(elfNN_ia64_global_dyn_sym_thunk): Likewise.
(elfNN_ia64_local_dyn_sym_thunk): Likewise.
(elfNN_ia64_global_dyn_info_free): New function.
(elfNN_ia64_local_dyn_info_free): Likewise.
(elfNN_ia64_hash_table_free): Free local and global
elfNN_ia64_dyn_sym_info.
(addend_compare): New function.
(sort_dyn_sym_info): Likewise.
(get_dyn_sym_info): Updated to use binary search for addend.
(elfNN_ia64_check_relocs): Scan relocations to create dynamic
relocation arrays first.
PR ld/2404
* elflink.c (_bfd_elf_merge_symbol): Skip the default indirect
symbol from the dynamic definition with the default version if
its type and the type of existing regular definition mismatch.
(mips_elf_local_got_index): Use the hash table entry to record
the GOT index of forced-local symbols.
(mips_elf_initialize_tls_index): Rearrange code. Store the index
in either the hash table entry or the mips_got_entry, not both.
Add more commentary.
(mips_elf_multi_got): Make sure the g->next is nonnull when calling
mips_elf_initialize_tls_index.
* ld-mips-elf/tls-hidden3a.s, ld-mips-elf/tls-hidden3b.s,
* ld-mips-elf/tls-hidden3.d, ld-mips-elf/tls-hidden3.got,
* ld-mips-elf/tls-hidden3.ld, ld-mips-elf/tls-hidden3.r,
* ld-mips-elf/tls-hidden4a.s, ld-mips-elf/tls-hidden4b.s,
* ld-mips-elf/tls-hidden4.got, ld-mips-elf/tls-hidden4.r: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* cpu-m68k.c (bfd_m68k_compatible): Treat ISA A+ and ISA B code as
incompatible. Likewise MAC and EMAC code.
* elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Use
bfd_get_compatible to set the new bfd architecture. Rely on it
to detect incompatibilities.
gas/
* config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
mcfemac instead of mcfmac.
ld/testsuite/
* ld-m68k/merge-error-1a.s, ld-m68k/merge-error-1b.s,
* ld-m68k/merge-error-1a.d, ld-m68k/merge-error-1b.d,
* ld-m68k/merge-error-1c.d, ld-m68k/merge-error-1d.d,
* ld-m68k/merge-error-1e.d, ld-m68k/merge-ok-1a.d,
* ld-m68k/merge-ok-1b.d: New tests.
* ld-m68k/m68k.exp: Run them.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* elf32-ppc.c (ppc_elf_relocate_section): Copy addend from
first relocation to the second when relaxing TLS GD to LE;
zero it out when relaxing to IE.
ld/testsuite/ChangeLog:
* ld-powerpc/tls32.s: Verify that +32768 @plt addend is
discarded.
against __GLOBAL_OFFSET_TABLE__ need never be dynamic. Tweak
last change to REL32 relocs so that they are counted as
possibly dynamic as per REL24 and REL14.
* elf32-mips.c (mips_elf_adjust_addend): New function, mostly split
out from...
(_bfd_mips_elf_relocate_section): ...here. Use it to adjust r_addend
for final links too.
ld/testsuite/
* ld-mips/emit-relocs-1a.s, ld-mips/emit-relocs-1b.s,
* ld-mips/emit-relocs-1.ld, ld-mips/emit-relocs-1.d: New test.
* ld-mips/mips-elf.exp: Run it.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
* elf32-ppc.c (is_ppc_elf_target): Return true if the target is
bfd_elf32_powerpc_vxworks_vec.
ld/testsuite/
* ld-i386/vxworks1.ld (.data): New section.
* ld-i386/vxworks1-lib.s: Add a pointer to a local symbol.
* ld-i386/vxworks1-lib.rd: Test for the associated reloc.
* ld-powerpc/vxworks1.ld (.data): New section.
* ld-powerpc/vxworks1-lib.s: Add a pointer to a local symbol.
* ld-powerpc/vxworks1-lib.rd: Test for the associated reloc.
* elf32-i386.c (elf_i386_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(elf_i386_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf32-ppc.c (ppc_elf_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(ppc_elf_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf-vxworks.c (elf_vxworks_create_dynamic_sections): New function.
* elf-vxworks.h (elf_vxworks_create_dynamic_sections): Declare.
ld/testsuite/
* ld-i386/ld-i386/vxworks1-lib.nd: New test.
* ld-i386/i386.exp: Run it.
* ld-powerpc/ld-powerpc/vxworks1-lib.nd: New test.
* ld-powerpc/powerc.exp: Run it.
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
ld/
* emulparams/elf32ppccommon.sh: New file, extracted from...
* emulparams/elf32ppc.sh: ...here.
* emulparams/elf32ppcvxworks.sh: Include elf32ppccommon.sh
instead of elf32ppc.sh.
(BSS_PLT): Remove override.
* Makefile.am (eelf32lppc.c): Depend on elf32ppccommons.h.
(eelf32lppcnto.c, eelf32lppcsim.c, eelf32ppcnto.c): Likewise.
(eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppcsimm): Likewise.
(eelf32ppclinux.c): Likewise.
(eelf32ppcvxworks.c): Likewise. Add missing vxworks.sh dependency.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-powerpc/vxworks1-lib.s, ld-powerpc/vxworks1-lib.dd,
* ld-powerpc/vxworks1-lib.rd, ld-powerpc/vxworks1.s,
* ld-powerpc/vxworks1.dd, ld-powerpc/vxworks1.rd,
* ld-powerpc/vxworks1.ld, ld-powerpc/vxworks1.sd: New test.
* ld-powerpc/powerpc.exp: Run it.
* elf32-i386.c (elf_i386_link_hash_table): Add next_tls_desc_index.
(elf_i386_link_hash_table_create): Initialize it.
(elf_i386_compute_jump_table_size): Use it instead of
srelplt->reloc_count.
(allocate_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
ld/testsuite/
* ld-i386/emit-relocs.s, ld-i386/emit-relocs.d: New test.
* ld-i386/i386.exp: Run it.
PR ld/2322
* elf.c (get_segment_type): New function.
(_bfd_elf_print_private_bfd_data): Use it.
(print_segment_map): New function.
(assign_file_positions_for_segments): Call print_segment_map
when there are not enough room for program headers.
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
traditional MIPS ELF targets.
gas:
* configure.tgt: set emulation for mips-*-netbsd*
ld:
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Use the traditional target.
PR binutils/2338
* dwarf2.c (check_function_name): New function.
(_bfd_dwarf2_find_nearest_line): Use check_function_name to
check if function is correct.
* elfxx-mips.c (mips_elf_initialize_tls_index): If a TLS symbol
has already been assigned a GOT index, copy that index to the
current hash table entry.
ld/testsuite/
* ld-mips-elf/tls-hidden2a.s, ld-mips-elf/tls-hidden2b.s,
* ld/testsuite/ld-mips-elf/tls-hidden2.d,
* ld/testsuite/ld-mips-elf/tls-hidden2-got.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
PR binutils/2096
* dwarf2.c (comp_unit_contains_address): Update comment.
(_bfd_dwarf2_find_nearest_line): Use section's vma, instead of
lma. Return TRUE only if both comp_unit_contains_address and
comp_unit_find_nearest_line return TRUE.
(_bfd_dwarf2_find_line): Use section's vma, instead of lma.
opd section sym when opd has been edited. Use correct addend
when determining branch 'y' bit and branch overflow. Adjust and
save opd relocs for ld -r too.
* elfxx-mips.c (mips_elf_record_global_got_symbol): Add assert
to verify we have a got.
(_bfd_mips_elf_check_relocs): Add R_MIPS_TLS_GOTTPREL to relocs
needing a GOT.
* elf-bfd.h (struct elf_backend_data): New field 'elf_backend_ignore_undef_symbol'.
* elfxx-target.h (elf_backend_ignore_undef_symbol): Define to NULL if not
already defined.
(elfNN_bed): Initialise the elf_backend_ignore_undef_symbol field.
* elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): New function.
* elfxx-mips.h (elf_backend_ignore_undef_symbol): Define and prototype.
* elflink.c (elf_link_output_extsym): Check elf_backend_ignore_undef_symbol
before reporting an undefined symbol in a shared library.
xlate_offset_with_removed_text, build_xlate_map, free_xlate_map): New.
(check_section_ebb_pcrels_fit): Build new xlate_map, use it and free it
when finished.
PR ld/2008
* elf.c (_bfd_elf_setup_sections): Return FALSE if
elf_linked_to_section will be set to NULL.
* format.c (bfd_check_format_matches): Don't check the default
target twice.
Andreas Schwab <schwab@suse.de>
PR binutils/1991
* elf.c (assign_section_numbers): Always use the output section
when setting up sh_link for SHF_LINK_ORDER.
* readelf.c (get_mips_symbol_other): New function.
(get_symbol_other): New function.
(process_symbol_table): Call get_symbol_other() to get a description of the
st_other field if it contains more information than just the visibility.
* elfxx-mips.c (mips_elf_calculate_relocation): Ignore an undefined symbol if
it is optional.
(_bfd_mips_elf_merge_symbol_attribute): Make sure that the optional flag is
merged as well as the visibility.
* elfxx-mips.h (_bfd_mips_elf_merge_symbol_attribute): Prototype.
(elf_backend_merge_symbol_attribute): Define.
* mips.h (STO_OPTIONAL): Define.
(ELF_MIPS_IS_OPTIONAL): Define.
* hpux-core.c: Include <machine/reg.h> only if HPUX_CORE is
define.
* osf-core.c: Include <sys/core.h> only if OSF_CORE is defined.
* sco5-core.c: Include <sys/paccess.h> and <sys/region.h> only
if SCO5_CORE is defined.
* rs6000-core.c: ANSIfy all function definitions.
Add missing function prototypes.
(ptr_to_uint): New type.
(rs6000coff_core_p): Use it as intermediate step in casts.
(rs6000coff_core_file_matches_executable_p): Likewise.
* xcoff-target.h (rs6000coff_core_p): Fix prototype.
(rs6000coff_core_file_matches_executable_p): Likewise.
* cache.c (enum cache_flag): New.
(close_one): Save file mtime.
(bfd_cache_lookup): Add flag arg, adjust all users.
(bfd_cache_lookup_worker): Likewise.
(cache_btell): Use CACHE_NO_OPEN and return abfd->where if file
not open.
(cache_bflush): Similarly, and return success of file not open.
(cache_bseek): Use CACHE_NO_SEEK if SEEK_SET or SEEK_END.
(cache_bstat): Use CACHE_NO_SEEK_ERROR.
