Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
This patch enhances the debugger to distinguish between fat pointers
that represent either: array types, or array access types. In the latter
case, the object/type is encoded as a typedef type pointing to the fat
pointer.
The first part of the change is to adjust ada_check_typedef to avoid
stripping the typedef layer when it points to a fat pointer. The rest
of the patch is adjustments required in various places to deal with
the fact that the type is uses might now be a typedef.
gdb/ChangeLog:
* ada-lang.h (ada_coerce_to_simple_array): Add declaration.
* ada-lang.c (ada_typedef_target_type): New function.
(desc_base_type): Add handling of fat pointer typedefs.
(ada_coerce_to_simple_array): Make non-static.
(decode_packed_array_bitsize): Add handling of fat pointer typedefs.
Add assertion.
(ada_template_to_fixed_record_type_1, ada_to_fixed_type)
(ada_check_typedef): Add handling of fat pointer typedefs.
(ada_evaluate_subexp) [OP_FUNCALL]: Likewise.
* ada-typeprint.c (ada_print_type): Add handling of fat pointer
typedefs.
* ada-valprint.c (ada_val_print_1): Convert fat pointers that are not
array accesses to simple arrays rather than simple array pointers.
(ada_value_print): In the case of array descriptors, do not print
the value type description unless it is an array access.
gdb/testsuite/ChangeLog:
* gdb.ada/lang_switch.exp: Correct expected parameter value.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Glitches): Remove paragraph describing the
occasional case where the debugger prints an array address
instead of the array itself.
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document "internal"
parameter, and visible attribute.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add internal watchpoint and
breakpoint tests.
New command "set directories".
* NEWS: Document them.
* source.c (set_directories_command): New function.
(show_directories_1): Renamed from show_directories.
All callers updated.
(show_directories_command): New function.
(_initialize_source): Install "directories" as a set/show
variable instead of just a show command.
doc/
* gdb.texinfo (Source Path): Document "set directories".
testsuite/
* gdb.base/help.exp: Update expected output.
* gdb.python/py-parameter.exp: New file.
enable pretty-printer, disable pretty-printer.
* NEWS: Mention them.
* data-directory/Makefile.in (PYTHON_FILES): Add gdb/printing.py,
gdb/command/__init__.py, gdb/command/pretty_printers.py.
* python/lib/gdb/__init__.py: Install pretty-printer commands.
* python/lib/gdb/printing.py: New file.
* python/lib/gdb/command/__init__.py: New file.
* python/lib/gdb/command/pretty_printers.py: New file.
doc/
* gdb.texinfo (Pretty Printing): Expand into three sections,
introduction, example, and commands.
(Python API): Delete section Disabling Pretty-Printers, merge into
Selecting Pretty-Printers.
(Writing a Pretty-Printer): New section. Move the pretty-printer
example here, and reformat to match python coding style. Add a second
example using the gdb.printing module.
(Python modules): Add gdb.printing.
testsuite/
* gdb.python/py-pp-maint.c: New file.
* gdb.python/py-pp-maint.exp: New file.
* gdb.python/py-pp-maint.py: New file.
All references updated. Correct sections marked as subsections.
(Coding Standards): New chapter. Move the coding standard related
subsections here. Add section on Python coding standards.
This announces the support for debugging Ada programs using
the Ravenscar Profile, as well as documents the new commands
introduced as part of this effort.
gdb/ChangeLog:
* NEWS: Announce Ravenscar Profile support.
gdb/doc/ChangeLog:
* gdb.texinfo (Ravenscar Profile): New node.
as a feature reported by -list-target-features.
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
feature `reverse' output by -list-target-features.
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to
call this function.
(arm_pc_is_thumb): Add a gdbarch argument. Update all callers.
Check is_m after force-mode.
(arm_gdbarch_init): Check the binary before the target description.
Add check for M profile attribute. If we have an M-profile device,
but no target register description, use arm-with-m. Recognize the
new org.gnu.gdb.arm.m-profile feature and its xpsr register.
(_initialize_arm_tdep): Call initialize_tdesc_arm_with_m.
* arm-tdep.h (XPSR_T): Define.
(struct gdbarch_tdep): Add is_m member.
* features/arm-m-profile.xml, features/arm-with-m.c,
features/arm-with-m.xml: New files.
doc/
* gdb.texinfo (ARM Features): Document
org.gnu.gdb.arm.m-profile.
* linux-thread-db.c (libthread_db_debug): New variable.
(thread_db_find_new_threads_silently): Control verbosity with it.
(try_thread_db_load_1, try_thread_db_load): Likewise.
(find_new_threads_once): Likewise.
(_initialize_thread_db): Set/show it.
doc/ChangeLog
2010-07-31 Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.texinfo (Threads): Document 'debug libthread-db'.
* python/py-value.c (valpy_call): New Function.
2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-value.exp (test_inferior_function_call): New function.
* gdb.python/py-value.c (func1): New function.
(func2): Likewise.
2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Values From Inferior): Add value inferior function
call description.
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
gdb/doc/
Make core files the process_stratum.
* gdb.texinfo (Active Targets): Remove core_stratum. Include
record_stratum example.
gdb/testsuite/
Make core files the process_stratum.
* gdb.base/corefile.exp (run: load core again)
(run: sanity check we see the core file, run: with core)
(run: core file is cleared, attach: load core again)
(attach: sanity check we see the core file, attach: with core)
(attach: core file is cleared): New tests.
* gdb.base/coremaker.c (main): New parameters. Implement "sleep" argv.
2010-06-27 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add entry announcing the python directory.
2010-06-27 Joel Brobecker <brobecker@adacore.com>
* gdb.texinfo (Python): Document what the python directory is
and what its location is.
(Basic Python): Document the gdb.PYTHONDIR constant.
* i386-tdep.c (i386_record_lea_modrm): Change warning to query.
(i386_process_record): Ditto.
* record.c (record_memory_query): New variable.
(_initialize_record): New command "set record memory-query".
* record.h (record_memory_query): New extern.
2010-06-22 Hui Zhu <teawater@gmail.com>
* gdb.texinfo: (Process Record and Replay): Add documentation
for command "set record memory-query".
* gdb.texinfo: Relicense under GFDL version 1.3.
* annotate.texinfo: Relicense under GFDL version 1.3.
* gdbint.texinfo: Relicense under GFDL version 1.3.
* stabs.texinfo: Relicense under GFDL version 1.3.
* fdl.texi: Update to version 1.3.
* osdata.c (get_osdata): Warn separately if target does not report
type list.
(info_osdata_command): Allow empty type, report error if target
does not return available types of OS data.
* linux-nat.c (linux_nat_xfer_osdata): Report list of OS data
types if no annex supplied.
* gdb.texinfo (Operating System Auxiliary Information): Describe
"info os" when no arguments given.
2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* breakpoint.c: Include parser-defs.h.
(watchpoint_exp_is_const): New function.
(watch_command_1): Call watchpoint_exp_is_const to check
if the expression is constant.
gdb/doc/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo: Include information about the correct use
of addresses in the `watch' command.
gdb/testsuite/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/watch-notconst.c: New file.
* gdb.base/watch-notconst.S: New file.
* gdb.base/watch-notconst2.c: New file.
* gdb.base/watch-notconst2.S: New file.
* gdb.base/watch-notconst.exp: New file.
* gdb.base/watchpoint.c (global_ptr_ptr): New variable.
(func4): Add operations on `global_ptr_ptr'.
* gdb.base/watchpoint.exp (test_constant_watchpoint): New
routine to test watchpoints created with a constant expression.
(test_inaccessible_watchpoint): Include tests for watchpoints
created with a constant expression.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
* NEWS: Document them.
* python/py-cmd.c (cmdpy_function): Don't print a traceback if
the exception is gdb.GdbError. Print a second traceback if there's
an error computing the error message.
(gdbpy_string_to_argv): New function.
* python/py-utils.c (gdbpy_obj_to_string): New function.
(gdbpy_exception_to_string): New function.
* python/python-internal.h (gdbpy_string_to_argv): Declare.
(gdbpy_obj_to_string, gdbpy_exception_to_string): Declare.
(gdbpy_gdberror_exc): Declare.
* python/python.c (gdbpy_gdberror_exc): New global.
(_initialize_python): Initialize gdbpy_gdberror_exc and create
gdb.GdbError.
(GdbMethods): Add string_to_argv.
doc/
* gdb.texinfo (Exception Handling): Document gdb.GdbError.
(Commands In Python): Document gdb.string_to_argv.
testsuite/
* gdb.python/py-cmd.exp: Add tests for gdb.GdbError and
gdb.string_to_argv.
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-parameter.
(SUBDIR_PYTHON_SRCS): Likewise.
(py-parameter.o): New rule.
* python/py-parameter.c: New file.
* python/python-internal.h (gdbpy_initialize_parameter)
(gdbpy_parameter, gdbpy_parameter_value)
(gdbpy_parse_command_name): Declare.
* python/py-cmd.c (parse_command_name): Rename to
gdbpy_parse_command_name.
(gdbpy_parse_command_name): Accept a starting list parameter and
use over cmdlist.
(cmdpy_init): Use gdbpy_parse_command_name.
* python/python.c (parameter_to_python): Rename to
gdbpy_parameter_to_python. Accept enum var_types and value.
(gdbpy_parameter): Use gdbpy_parameter_value.
(_initialize_python): Call gdbpy_initialize_parameters.
2010-04-29 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-param.exp: New File.
2010-04-29 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Parameters In Python): New Node.
* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove
macro definition and related comment.
* infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro.
(resume): Remove code and comment related to this macro.
doc ChangeLog entry:
* gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation
of macro deleted from GDB code.
* gdb.texinfo (Data): New @menu reference to Pretty Printing.
(Python API): Change the reference to Pretty Printing API.
(Pretty Printing): Move the user part under the Data node. Reformat
the sample output to 72 columns. Create a new reference to Pretty
Printing API. Rename the API part ...
(Pretty Printing API): To a new node name.
(Selecting Pretty-Printers, Progspaces In Python, Objfiles In Python)
(GDB/MI Variable Objects): Change references to Pretty Printing API.
* gdbtypes.h (builtin_type): Add builtin_char16 and builtin_char32
fields.
* gdbtypes.c (gdbtypes_post_init): Set builtin_char16 and
builtin_char32 fields.
* printcmd.c (decode_format): Set char size to '\0'
for strings unless explicit size is given.
(print_formatted): Correct calculation of NEXT_ADDRESS
for 16 or 32 bit strings.
(do_examine): Do not force byte size for strings.
Use builtin_char16 and builtin_char32 types to display
16 or 32 bit-wide strings.
(x_command): Set LAST_SIZE to 'b' for string type.
gdb/doc ChangeLog
* gdb.texinfo (Examining memory): Update for
change in string display with explicit size.
gdb/testsuite ChangeLog
* gdb.base/charset.c (Strin16, String32): New variables.
* gdb.base/charset.exp (gdb_test): Test correct display
of 16 or 32 bit strings.
Implement `save-breakpoints'.
gdb/
* breakpoint.c (save_cmdlist): New.
(breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
to save_cmdlist.
(print_recreate_catch_fork): New.
(catch_fork_breakpoint_ops): Install it.
(print_recreate_catch_vfork): New.
(catch_vfork_breakpoint_ops): Install it.
(print_recreate_catch_syscall): New.
(catch_syscall_breakpoint_ops): Install it.
(print_recreate_catch_exec): New.
(catch_exec_breakpoint_ops): Install it.
(print_recreate_exception_catchpoint): New.
(gnu_v3_exception_catchpoint_ops): Install it.
(save_breakpoints): New, based on tracepoint_save_command, but
handle all breakpoint types.
(save_breakpoints_command): New.
(tracepoint_save_command): Rename to...
(save_tracepoints_command): ... this, and reimplement using
save_breakpoints.
(save_command): New.
(_initialize_breakpoints): Install the "save" command prefix.
Install the "save breakpoints" command. Make "save-tracepoints" a
deprecated alias for "save tracepoints".
* breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
* ada-lang.c (print_recreate_exception): New.
(print_recreate_catch_exception): New.
(catch_exception_breakpoint_ops): Install it.
(print_recreate_catch_exception_unhandled): New.
(catch_exception_unhandled_breakpoint_ops): Install it.
(print_recreate_catch_assert): New.
(catch_assert_breakpoint_ops): Install it.
* NEWS: Mention the new `save breakpoints' command. Mention the
new `save tracepoints' alias and that `save-tracepoints' is now
deprecated.
gdb/doc/
* gdb.texinfo (Save Breakpoints): New node.
(save-tracepoints): Rename to ...
(save tracepoints): ... this. Mention that `save-tracepoints' is
a deprecated alias to `save tracepoints'.
gdb/testsuite/
* gdb.trace/save-trace.exp: Adjust.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
PR python/11381
* python/py-prettyprint.c (pretty_print_one_value): Test for
Py_None.
(print_string_repr): Test for Py_None. Set flags accordingly.
Return value depending on return type.
(print_children): Take a value indicating whether data was printed
before this function was called. Alter output accordingly.
(apply_val_pretty_printer): Capture return value from
print_string_repr and pass to print_children.
2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-prettyprint.py (NoStringContainerPrinter): New printer.
* gdb.python/py-prettyprint.c: Add justchildren struct, typedefs.
* gdb.python/py-prettyprint.exp: New test for to_string returning None.
* gdb.python/py-mi.exp: New test for to_string returning None.
2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Pretty Printing): Document behaviour when to_string
returns None.
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
doc/
* gdb.texinfo (Command Files): Document that gdb skips $cdir in
search path, and document that gdb only scans the search path if
the script's path doesn't specify a directory.
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
* tracepoint.c (parse_trace_status): Don't allow plain strings in
the terror description. Don't expect an X prefix.
gdb/doc/
* gdb.texinfo (Tracepoint Packets): Remove mention that
terror:string may be plain text, and drop mention of X prefix.
PR breakpoints/9352:
* NEWS: Mention changes to `commands' and `rbreak'.
* symtab.c (do_end_rbreak_breakpoints): New function.
(rbreak_command): Call start_rbreak_breakpoints; arrange to call
end_rbreak_breakpoints.
* breakpoint.c (breakpoint_count, tracepoint_count): Now static.
(set_breakpoint_count): Likewise. Clear last_was_multi.
(multi_start, multi_end, last_was_multi): New globals.
(start_rbreak_breakpoints, end_rbreak_breakpoints): New
functions.
(struct commands_info): New
(do_map_commands_command): New function.
(commands_command_1): New function.
(commands_command): Use it.
(commands_from_control_command): Likewise.
(do_delete_breakpoint): New function.
(delete_command): Use it.
(map_breakpoint_numbers): Add 'data' argument. Pass to callback.
(do_map_disable_breakpoint): New function.
(disable_command): Use it.
(do_map_enable_breakpoint): New function.
(enable_command): Use it.
(enable_once_breakpoint): Add argument.
(enable_once_command): Update.
(enable_delete_breakpoint): Add argument.
(enable_delete_command): Update.
(break_command_really): Set last_was_multi when needed.
(check_tracepoint_command): Fix formatting.
(validate_commands_for_breakpoint): New function.
(breakpoint_set_commands): Use it.
(tracepoint_save_command): Update.
* breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints):
Declare.
gdb/doc
PR breakpoints/9352:
* gdb.texinfo (Break Commands): Update.
gdb/testsuite
PR breakpoints/9352:
* gdb.base/default.exp: Update.
* gdb.base/commands.exp: Update.
* gdb.cp/extern-c.exp: Test setting commands on multiple
breakpoints at once.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops): New method
to_set_circular_trace_buffer.
(target_set_circular_trace_buffer): New macro.
* target.c (update_current_target): Add
to_set_circular_trace_buffer, fix to_set_disconnected_tracing
default behavior.
* remote.c (remote_set_circular_trace_buffer): New function.
(init_remote_ops): Add it to vector.
* tracepoint.h (struct trace_status): New field traceframes_created,
change buffer_size and buffer_free to int.
* tracepoint.c (circular_trace_buffer): New global.
(start_tracing): Send values of disconnected tracing and circular
trace buffer settings.
(set_circular_trace_buffer): New function.
(parse_trace_state): Handle total space and frames created.
(trace_status_command): Display total space and total frames
created.
(trace_save): Write out new status values.
(parse_trace_status): Set traceframe_count, traceframes_created,
buffer_free and buffer_size to -1 by default.
(_initialize_tracepoint): New setshow for circular-trace-buffer.
* NEWS: Mention the circular trace buffer option.
* gdb.texinfo (Starting and Stopping Trace Experiments): Describe
circular-trace-buffer.
(Tracepoint Packets): Describe QTBuffer, and details of the
qTStatus reply.
* gdb.trace/circ.exp: Test circular-trace-buffer.
* gdb.trace/tfile.exp: Update tstatus test.
(append_composite_type_field_aligned): Use the new function.
* gdbtypes.h (append_composite_type_field_raw): Declare.
* target-descriptions.c (struct tdesc_type_field): Add start and end.
(struct tdesc_type_flag): New type.
(struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to
kind. Add size to u.u. Add u.f for flags.
(tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS.
(tdesc_free_type): Likewise.
(tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New.
(tdesc_add_field): Handle TDESC_TYPE_STRUCT.
(tdesc_add_bitfield, tdesc_add_flag): New.
* target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size)
(tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare.
* xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to
current_type. Add current_type_size and current_type_is_flags.
(tdesc_start_union): Clear the new fields.
(tdesc_start_struct, tdesc_start_flags): New.
(tdesc_start_field): Handle struct fields, including bitfields.
(field_attributes): Make type optional. Add start and end.
(union_children): Rename to struct_union_children.
(union_attributes): Rename to struct_union_attributes. Add optional
size.
(flags_attributes): New.
(feature_children): Add struct and flags.
* features/gdb-target.dtd: Add flags and struct to features.
Make field type optional. Add field start and end.
doc/
* gdb.texinfo (Types): Describe <struct> and <flags>.
testsuite/
* gdb.xml/extra-regs.xml: Add struct1, struct2, and flags
types. Add structreg, bitfields, and flags registers.
* gdb.xml/tdesc-regs.exp: Test structreg and bitfields
registers.
PR python/11036
* python/py-frame.c (frapy_read_var): Add block argument and logic
to cope with user provided blocks.
2010-02-28 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Frames In Python): Add block parameter and
description to read_var text.
2010-02-28 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-frame.exp: Add read_var block tests.
* gdb.python/py-frame.c (block): New function.
Tom Tromey <tromey@redhat.com>
* python/py-type.c (typy_lookup_typename): Add in block argument.
If provided restrict lookup to specified blocks.
(gdbpy_lookup_type): Likewise.
(typy_lookup_type): Likewise.
2010-02-26 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Types In Python): Describe block argument in
template_argument and gdb.lookup_type.
* breakpoint.c (clear_syscall_counts): Take struct inferior*.
* inferior.c (add_inferior_silent): Notify inferior_added
observer.
(delete_inferior_1): Notify inferior_removed observer.
(exit_inferior_1): Pass inferior, not pid, to observer.
(inferior_appeared): Likewise.
(add_inferior_with_spaces): New.
(add_inferior_command): Use the above.
* inferior.h (delete_inferior_1, add_inferior_with_spaces):
Declare.
* inflow.c (inflow_inferior_exit): Likewise.
* jit.c (jit_inferior_exit_hook): Likewise.
* mi/mi-cmds.c (mi_cmds): Register add-inferior and
remove-inferior.
* mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
* mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
(report_initial_inferior): New.
(mi_inferior_removed): Register the above. Make sure
inferior_added observer is called on the first inferior.
(mi_new_thread, mi_thread_exit): Thread group is now identified by
inferior number, not pid.
(mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
affected.
* mi/mi-main.c (current_context): New.
(proceed_thread_callback): Use typed closure.
Proceed everything if pid is 0. Most implementation split into
(proceed_thread): ... this.
(run_one_inferior): New.
(mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
Adjust for multiexec behaviour.
(mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
(mi_cmd_execute): Handle the 'thread-group' option here.
Do some extra checks.
* mi-parse.c (mi_parse): Handle the --all and --thread-group
options.
* mi-parse.h (struct mi_parse): New fields all and thread_group.
* gdb.texinfo (MI commands): Added documentation of --reverse
option to a set of MI commands. Restructured documentation of MI
commands --exec-continue to reflect the complexity of reverse
execution.
* gdb.texinfo (Using the Collected Data): Specify that the address
range of `tfind outsize' is exclusive, and that the address range
of `tfind range' is inclusive.
(Tracepoint Packets): Specify that the address range of
`QTFrame:range' is inclusive, and that the address range of
`QTFrame:outside' is exclusive
gdb/
* tracepoint.c (_initialize_tracepoint): Specify that the address
range of `tfind outsize' is exclusive, and that the address range
of `tfind range' is inclusive, in the commands' help strings.
* gdb.texinfo (File Options): Adjust the documentation of this
switch to refer to the "source" command rather than partially
duplicating some of the relevant information.
(Extending GDB): Introduce and document the set/show script-extension
setting.
(Command Files): Add note explaining that the "source" command
is also used to evalute scripts written in other languages.
Remove the short slightly incorrect reference to sourcing Python
scripts.
(Python Commands): Document how to execute a Python script from GDB.
* tracepoint.h (enum trace_stop_reason): New enum.
(struct trace_status): New struct.
(parse_trace_status): Declare.
(struct uploaded_tp): Move here from remote.c,
add fields for actions.
(struct uploaded_tsv): New struct.
* tracepoint.c (tfile_ops): New target vector.
(trace_fd): New global.
(tfile_open): New function.
(tfile_close): New function.
(tfile_files_info): New function.
(tfile_get_trace_status): New function.
(tfile_get_traceframe_address): New function.
(tfile_trace_find): New function.
(tfile_fetch_registers): New function.
(tfile_xfer_partial): New function.
(tfile_get_trace_state_variable_value): New function.
(init_tfile_ops): New function.
(_initialize_tracepoint): Call it, add tfile target.
(trace_status): New global.
(current_trace_status): New function.
(trace_running_p): Remove, change all users to get from
current_trace_status()->running.
(get_trace_status): Remove.
(trace_status_command): Call target_get_trace_status directly,
report more detail including tracing stop reasons.
(trace_find_command): Always allow tfind on a file.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(trace_frames_offset, cur_offset): Declare as off_t.
(trace_regblock_size): Rename from reg_size, update users.
(parse_trace_status): New function.
(tfile_interp_line): New function.
(disconnect_or_stop_tracing): Ensure current trace
status before asking what to do.
(stop_reason_names): New global.
(trace_save_command): New command.
(get_uploaded_tp): Move here from remote.c.
(find_matching_tracepoint): Ditto.
(merge_uploaded_tracepoints): New function.
(parse_trace_status): Use stop_reason_names.
(_initialize_tracepoint): Define tsave command.
* target.h (target_ops): New fields to_save_trace_data,
to_upload_tracepoints, to_upload_trace_state_variables,
to_get_raw_trace_data, change to_get_trace_status
to take a pointer to a status struct.
(target_save_trace_data): New macro.
(target_upload_tracepoints): New macro.
(target_upload_trace_state_variables): New macro.
(target_get_raw_trace_data): New macro.
* target.c (update_current_target): Add new methods, change
signature of to_get_trace_status.
* remote.c (hex2bin): Make globally visible.
(bin2hex): Ditto.
(remote_download_trace_state_variable): Download name also.
(remote_get_trace_status): Update parameter, use
parse_trace_status.
(remote_save_trace_data): New function.
(remote_upload_tracepoints): New function.
(remote_upload_trace_state_variables): New function.
(remote_get_raw_trace_data): New function.
(remote_start_remote): Use them.
(_initialize_remote_ops): Add operations.
* ax-gdb.c: Include breakpoint.h.
* breakpoint.c (create_tracepoint_from_upload): Use
break_command_really, return tracepoint, warn about unimplemented
parts.
* NEWS: Mention trace file addition.
* gdb.texinfo (Trace Files): New section.
(Tracepoint Packets): Document QTSave and qTBuffer.
(Trace File Format): New appendix.
* generic/gdbtk-bp.c (gdb_trace_status): Use current_trace_status.
* gdb.trace/tfile.c: New file.
* gdb.trace/tfile.exp: New file.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
* agentexpr.texi: Add 2010 to the list of copyright years.
* annotate.texinfo: Likewise.
* gdb.texinfo: Likewise.
* gdbint.texinfo: Likewise.
* observer.texi: Likewise.
* stabs.texinfo: Likewise.
Add trace state variables.
* ax.h (enum agent_op): Add getv, setv, and tracev.
(ax_tsv): Declare.
* ax-gdb.c: Include tracepoint.h.
(gen_expr): Handle BINOP_ASSIGN, BINOP_ASSIGN_MODIFY, and
OP_INTERNALVAR.
(gen_expr_binop_rest): New function, split from gen_expr.
* ax-general.c (ax_tsv): New function.
(aop_map): Add new bytecodes.
* tracepoint.h (struct trace_state_variable): New struct.
(tsv_s): New typedef.
(find_trace_state_variable): Declare.
* tracepoint.c (tvariables): New global.
(next_tsv_number): New global.
(create_trace_state_variable): New function.
(find_trace_state_variable): New function.
(delete_trace_state_variable): New function.
(trace_variable_command): New function.
(delete_trace_variable_command): New function.
(tvariables_info): New function.
(trace_start_command): Download tsvs with initial values.
(_initialize_tracepoint): Add new commands.
* NEWS: Mention the addition of trace state variables.
==> doc/ChangeLog <==
2009-12-28 Stan Shebs <stan@codesourcery.com>
* gdb.texinfo (Trace State Variables): New section.
(Tracepoint Packets): Describe trace state variable packets.
* agentexpr.texi (Bytecode Descriptions): Describe trace state
variable bytecodes.
==> testsuite/ChangeLog <==
2009-12-28 Stan Shebs <stan@codesourcery.com>
* gdb.trace/tsv.exp: New file.
* gdb.base/completion.exp: Update ambiguous info output.
PR python/10804
* python/py-type.c (typy_range): New Function.
2009-12-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-type.exp (test_range): New test.
2009-12-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Types In Python): Describe range function.
* breakpoint.c (find_condition_and_thread): Correct task error message.
* c-exp.y (yylex): Stop before "thread N", "task N", or abbreviations
of those.
doc/
* gdb.texinfo (Thread-Specific Breakpoints): Thread specifiers
are allowed after the breakpoint condition.
testsuite/
* gdb.base/condbreak.exp: Test combinations of "break *EXP",
"if", and "thread". Correct matching in the previous test.
* symfile.c (build_id_to_debug_filename): New variable debugdir. Move
variables size, s and data into a new inner block. Change xmalloc for
alloca, use direct BUILDID->SIZE there now. Loop for the
DEBUG_FILE_DIRECTORY components.
(find_separate_debug_file): New variable debugdir and debugdir_end.
Loop for the DEBUG_FILE_DIRECTORY components.
(_initialize_symfile): For "debug-file-directory" use plural and note
one can use multiple components now.
gdb/doc/
* gdb.texinfo (set debug-file-directory, show debug-file-directory)
(Auto-loading): Use plural and note one can use multiple components now.
gdb/testsuite/
* gdb.base/sepdebug.exp: New test_different_dir call for multiple-dirs.
* remote.c (interrupt_sequence_control_c)
(interrupt_sequence_break, interrupt_sequence_break_g)
(interrupt_sequence_modes): New constants.
(interrupt_sequence_mode, interrupt_on_connect): New variable.
(show_interrupt_sequence): New function.
(set_remotebreak, show_remotebreak): New function.
(send_interrupt_sequence): New function.
(remote_start_remote): Call send_interrupt_sequence if
interrupt_on_connect is true.
(remote_stop_as): Call send_interrupt_sequence.
(_initialize_remote): Add interrupt-sequence and interrupt-on-connect,
modify remotebreak to call set_remotebreak and show_remotebreak.
* NEWS: Add entry for "set/show remote interrupt-sequence" and
"set/show remote interrupt-on-connect". Also mention that
"set/show remotebreak" is now deprecated.
gdb/doc/:
* gdb.texinfo (Remote Configuration): Add "set/show remote
interrupt-sequence" and "set/show remote interrupt-on-connect" command.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
* amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(amd64_linux_get_syscall_number): New function.
(amd64_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* breakpoint.c: New include: xml-syscall.h.
(set_raw_breakpoint_without_location): Setting the parameters
for the catch syscall feature.
(insert_catch_syscall): New.
(remove_catch_syscall): New.
(breakpoint_hit_catch_syscall): New.
(print_it_catch_syscall): New.
(print_one_catch_syscall): New.
(print_mention_catch_syscall): New.
(catch_syscall_breakpoint_ops): New.
(syscall_catchpoint_p): New.
(create_catchpoint_without_mention): New.
(create_catchpoint): Modified in order to use
create_catchpoint_without_mention.
(create_syscall_event_catchpoint): New.
(clean_up_filters): New.
(catch_syscall_split_args): New.
(catch_syscall_command_1): New.
(delete_breakpoint): Add cleanup for catch syscall.
(is_syscall_catchpoint_enabled): New.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
(catch_syscall_completer): New completer function.
(add_catch_command): Add the completer function for catchpoints.
* breakpoint.h (syscalls_to_be_caught): New vector.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* gdbarch.sh: Add syscall catchpoint functions and structures.
(get_syscall_number): New.
(UNKNOWN_SYSCALL): New definition.
* i386-linux-nat.c (i386_linux_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* i386-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(i386_linux_get_syscall_number): New.
(i386_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* inf-child.c (inf_child_set_syscall_catchpoint): New.
(inf_child_target): Assign default values to target_ops.
* inf-ptrace.c (inf_ptrace_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* inferior.h (struct inferior): Included new variables
any_syscall_count, syscalls_counts and total_syscalls_count,
used to keep track of requested syscall catchpoints.
* infrun.c (resume): Add syscall catchpoint.
(deal_with_syscall_event): New.
(handle_inferior_event): Add syscall entry/return events.
(inferior_has_called_syscall): New.
* linux-nat.c: Define some helpful variables to track wether we have
support for the needed ptrace option.
(linux_test_for_tracesysgood): New.
(linux_supports_tracesysgood): New.
(linux_enable_tracesysgood): New.
(linux_enable_event_reporting): Save the current used ptrace
options.
(linux_child_post_attach): Calling linux_enable_tracesysgood.
(linux_child_post_startup_inferior): Likewise.
(linux_child_set_syscall_catchpoint): New function.
(linux_handle_extended_wait): Handle the case which the inferior stops
because it has called or returned from a syscall.
(linux_target_install_ops): Install the necessary functions to handle
syscall catchpoints.
* linux-nat.h (struct lwp_info): Include syscall_state into the
structure, which indicates if we are in a syscall entry or return.
* ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall filename for the arch.
(ppc_linux_get_syscall_number): New.
(ppc_linux_init_abi): Register the correct functions for syscall
catchpoint; setting the correct name for the XML syscall file.
* target.c (update_current_target): Update/copy functions related to
syscall catchpoint.
(target_waitstatus_to_string): Add syscall catchpoint entry/return
events.
* target.h (struct target_waitstatus): Add syscall number.
(struct syscall): New struct to hold information about syscalls
in the system.
(struct target_ops): Add ops for syscall catchpoint.
(inferior_has_called_syscall): New.
(target_set_syscall_catchpoint): New.
* xml-support.c (xml_fetch_content_from_file): New function,
transferred from xml-tdesc.c.
* xml-support.h (xml_fetch_content_from_file): New.
* xml-tdesc.c (fetch_xml_from_file): Function removed;
transferred to xml-support.c.
(file_read_description_xml): Updated to use the new
xml_fetch_content_from_file function.
* syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
support.
* syscalls/amd64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use amd64 architecture.
* syscalls/i386-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use i386 architecture.
* syscalls/ppc-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC architecture.
* syscalls/ppc64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC64 architecture.
* xml-syscall.c: New file containing functions for manipulating
syscall's XML files.
* xml-syscall.h: New file, exporting the functions above mentioned.
* Makefile.in: Support for relocatable GDB datadir and XML
syscall.
* NEWS: Added information about the catch syscall feature.
* doc/gdb.texinfo (Set Catchpoints): Documentation about the new
feature.
* testsuite/Makefile.in: Inclusion of catch-syscall object.
* testsuite/gdb.base/catch-syscall.c: New file.
* testsuite/gdb.base/catch-syscall.exp: New file.
* frame.c (get_frame_id): Default to outer_frame_id if the this_id
method does not supply an ID. Assert that the result is not
null_frame_id.
(outer_frame_id): New.
(frame_id_p): Accept outer_frame_id.
(frame_id_eq): Allow outer_frame_id to be equal to itself.
(frame_find_by_id): Revert previous local workarounds.
(get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
* frame.h (null_frame_id, frame_id_p): Update comments.
(outer_frame_id): Declare.
* infrun.c (handle_inferior_event): Do not treat all steps from the
outermost frame as subroutine calls.
* libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
* hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
* ia64-tdep.c (ia64_frame_this_id): Likewise.
(ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
Use outer_frame_id instead of null_frame_id.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
* i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
* inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
* thread.c (restore_selected_frame): Update comment and remove
frame_id_p check.
gdb/doc/
* gdbint.texinfo (Unwinding the Frame ID): Reference outer_frame_id.