to_insert_watchpoint, to_remove_watchpoint,
to_stopped_by_watchpoint, to_stopped_data_address,
to_region_size_ok_for_hw_watchpoint, to_can_use_hw_breakpoint to
target vecctor. Define their corresponding macros so they call
them.
* target.c: Add default and debug versions of for
to_insert_hw_breakpoint, to_remove_hw_breakpoint,
to_insert_watchpoint, to_remove_watchpoint,
to_stopped_by_watchpoint, to_stopped_data_address,
to_region_size_ok_for_hw_watchpoint, to_can_use_hw_breakpoint.
* target.c: New command, "set trust-readonly-sections on".
(do_xfer_memory): Honor the suggestion to trust readonly sections
by reading them from the object file instead of from the target.
(initialize_targets): Register command "set trust-readonly-sections".
Implement a "generate-core-file" command in gdb, save target state.
* gcore.c: New file. Implement new command 'generate-core-file'.
Save a corefile image of the current state of the inferior.
* linux-proc.c: Add linux-specific code for saving corefiles.
* target.h (struct target_ops): Add new target vectors for saving
corefiles; to_find_memory_regions and to_make_corefile_notes.
(target_find_memory_regions): New macro.
(target_make_corefile_notes): New macro.
* target.c (update_current_target): Inherit new target methods.
(dummy_find_memory_regions): New place-holder method.
(dummy_make_corefile_notes): New place-holder method.
(init_dummy_target): Initialize new dummy target vectors.
* exec.c (exec_set_find_memory_regions): New function.
Allow the exec_ops vector for memory regions to be taken over.
(exec_make_note_section): New function, target vector method.
* defs.h (exec_set_find_memory_regions): Export prototype.
* procfs.c (proc_find_memory_regions): New function, corefile method.
(procfs_make_note_section): New function, corefile method.
(init_procfs_ops): Set new target vector pointers.
(find_memory_regions_callback): New function.
(procfs_do_thread_registers): New function.
(procfs_corefile_thread_callback): New function.
* sol-thread.c (sol_find_memory_regions): New function.
(sol_make_note_section): New function.
(init_sol_thread_ops): Initialize new target vectors.
* inftarg.c (inftarg_set_find_memory_regions): New function.
Allow to_find_memory_regions vector to be taken over.
(inftarg_set_make_corefile_notes): New function.
Allow to_make_corefile_notes vector to be taken over.
* thread-db.c (thread_db_new_objfile): Don't activate thread-db
interface layer if not target_has_execution (may be a corefile).
* config/i386/linux.mh: Add gcore.o to NATDEPFILES.
* config/sparc/sun4sol2.mh: Ditto.
* config/alpha/alpha-linux.mh: Ditto.
* config/arm/linux.mh: Ditto.
* config/i386/x86-64linux.mh: Ditto.
* config/ia64/linux.mh: Ditto.
* config/m68k/linux.mh: Ditto.
* config/mips/linux.mh: Ditto.
* config/powerpc/linux.mh: Ditto.
* config/sparc/linux.mh: Ditto.
* infptrace.c (child_xfer_memory): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
* remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
* remote-array.c (array_xfer_memory): Likewise.
* remote-bug.c (bug_xfer_memory): Likewise.
* remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
* remote-eb.c (eb_xfer_inferior_memory): Likewise.
* remote-es.c (es1800_xfer_inferior_memory): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
* remote-mm.c (mm_xfer_inferior_memory): Likewise.
* remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
* remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
* remote-rdi.c (arm_rdi_xfer_memory): Likewise.
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
* remote-sds.c (sds_xfer_memory): Likewise.
* remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
* remote-st.c (st2000_xfer_inferior_memory): Likewise.
* remote-udi.c (udi_xfer_inferior_memory): Likewise.
* remote-vx.c (vx_xfer_memory): Likewise.
* remote.c (remote_xfer_memory): Likewise.
* target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
* target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
* target.h (#include "memattr.h"): Added.
(target_ops.to_xfer_memory): Add attrib argument.
* wince.c (_initialize_inftarg): Removed call to set_dcache_state.
* dcache.h (set_dcache_state): Removed declaration.
* dcache.c (set_dcache_state): Removed definition
* dcache.c: Update module comment, as dcache is now enabled and
disabled with memory region attributes instead of by the global
variable "remotecache". Add comment describing the interaction
between dcache and memory region attributes.
(dcache_xfer_memory): Add comment describing benefits of moving
cache writeback to a higher level.
(dcache_struct): Removed cache_has_stuff field. This was used to
record whether the cache had been accessed in order to invalidate
it when it was disabled. However, this is not needed because the
cache is write through and the code that enables, disables, and
deletes memory regions invalidate the cache. Add comment which
suggests that we could be more selective and only invalidate those
cache lines containing data from those memory regions.
(dcache_invalidate): Updated.
(dcache_xfer_memory): Updated.
(dcache_alloc): Don't abort() if dcache_enabled_p is clear.
(dcache_xfer_memory): Removed code that called do_xfer_memory() to
perform a uncached transfer if dcache_enabled_p was clear. This
function is now only called if caching is enabled for the memory
region.
(dcache_info): Always print cache info.
* target.c (do_xfer_memory): Add attrib argument.
(target_xfer_memory, target_xfer_memory_partial): Break transfer
into chunks defined by memory regions, pass region attributes to
do_xfer_memory().
* dcache.c (dcache_read_line, dcache_write_line): Likewise.
* Makefile.in (SFILES): Add memattr.c.
(COMMON_OBS): Add memattr.o.
(dcache.o): Add target.h to dependencies.
* memattr.c: New file.
* memattr.h: Likewise.
* target.c (do_xfer_memory): Only perform a single memory transfer
instead of iterating to tranfer the entire region. Higher layers
are expected to call this function multiple times for partial
transfers.
(target_xfer_memory_partial): Remove unused local variables.
2000-11-10 Nick Duffek <nsd@redhat.com>
* target.c (target_xfer_memory_partial): Return bytes transferred
instead of 0.
* solib.c (current_sos): New function, replacing find_solib.
(find_solib): Deleted.
(free_so): New function.
(clear_solib): Call free_so, instead of writing it out.
(solib_add): Rewritten: compare the inferior's current list of
shared objects with GDB's list, and do the required loads and
unloads.
(info_sharedlibrary_command, solib_address): Don't use find_solib
to walk the list of shared libraries: call solib_add, and then
walk the list at so_list_head normally.
* objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
detach the core target. These tasks are taken care of elsewhere.
* target.c (remove_target_sections): New function.
* target.h (remove_target_sections): New declaration.
* solib.c (symbol_add_stub): Check whether we've already created
an objfile for this shared object first, before doing all that
work to compute section addresses, etc.
* objfiles.c (unlink_objfile): Report an internal error if objfile
doesn't occur in the object_files list.
* solib.c (special_symbol_handling): Delete argument; it's not
used.
* solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
from solib structures. Use it throughout solib.c, get rid of all
CORE_ADDR casts.
(struct so_list): Change type of lmaddr to CORE_ADDR.
(first_link_map_member): Change return value type to CORE_ADDR,
update callers.
(solib_add_common_symbols): Change parameter type to CORE_ADDR,
update callers.
(open_symbol_file_object, find_solib): Change type of lm variable
to CORE_ADDR.
* target.c (do_target_signal_to_host): Do not use REALTIME_LO in
the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
33 by definition, whereas REALTIME_LO might be 32 on systems that
have SIG32 such as Linux. Make sure that the signal number
returned is within the range specified by REALTIME_LO and
REALTIME_HI.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
returns a possibly modified pid.
* inftarg.c (ptrace_him): Now returns pid;
* m3-nat.c (m3_trace_him): Now returns pid;
* infcmd.c (run_command): Minor cleanup.
* infrun.c (wait_for_inferior): Add another check for one_stepped
near where we read the pc to avoid erroneously setting
random_signal for multi-threaded support.
* procfs.c: Add support for Solaris LWPs. Remove def of
LOSING_POLL. Many cleanups... Several workarounds for Solaris
lossage. System call entry and exit are now handled by
dynamically registered handlers.
* (syscallname): Don't barf when handed an unknown syscall
number.
* (info_proc_syscalls): Ditto.
* sol-thread.c: New file. Implements Solaris thread support.
* symfile.c (symbol_file_add): Add call to target_new_objfile to
notify target-dependent code about new symbol tables.
* (clear_symtab_users): Call target_new_objfile to notify it of
the removal of all symbol tables.
* target.c (push_target): Make sure that to_close is non-zero
before calling it.
* target.h (target_new_objfile): Provide default.
* config/alpha/nm-osf2.h: Define LOSING_POLL because this version
of OSF can't hack using poll with /proc.
* config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
sol-thread-new-objfile.
* config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
add libthread_db.so.1 to NAT_CLIBS.
* config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
target_pid_to_str.
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
vectors anymore.
* (unpush_target): Test for to_close being set before calling.
* (target_xfer_memory, target_info): Check for to_has_memory
before playing with memory.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
* inflow.c (job_control, attach_flag, generic_mourn_inferior):
Remove, needed for both native and cross.
* target.c (attach_flag, generic_mourn_inferior): Put here.
* utils.c (job_control): Put here.
(terminal.h): Don't include anymore.
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c
Makefile.in configure.in
Added Files:
os9kread.c os9kstab.c remote-os9k.c
* os9kread.c: New file to read os9000 style symbo table.
* os9kstab.c: new file to read os9000 style stabs.
* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
* objfiles.c (find_pc_objfile): new function to search objfile
from pc.
* objfiles.c (objfile_relocate_data): new function to relocate
data symbols in symbol table.
* objfiles.h: Add two aux fields in struct objfile to handle
multiple symbol table files situation like in os9000.
* symfile.c: Change so 'symbol-file' command can handle multiple
files. Also call target_link() to get relocation infos.
* target.c (target_link): new function to get relocation info when
a symbol file is requested to load.
* main.c (quit_command): take out 'inferior_pid != 0' condition,
because in cross mode there's no inferior pid, bit they need to
be detached.
Makefile.in: add os9kread.c os9kstab.c and .o's.
configure.in: add i386os9k target.
config/i386/i386os9k.mt: new add.
config/i386/tm-i386os9k.h: new add.
caller. Put string in malloc'd space, so caller need not impose
arbitrary limits.
* solib.c (find_solib): Update to use new interface.
* irix5-nat.c (find_solib): Read o_path from inferior
(clear_solib): Free storage for o_path.
* valprint.c (val_print_string): Add comments.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
elfread.c (coff_symfile_finish): Add function, prototype, and
add to the xxxx_sym_fns struct for each file type. Also reformat
the xxxx_sym_fns vector to a standard format and add comments.
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,
elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read):
Pass pointer to struct objfile rather than pointer to sym_fns.
Change references inside each function accordingly. Allocate any
symbol file specific info in the per-objfile memory region.
* dbxread.c (free_and_init_header_files): Break function into
free_header_files(), called from dbx_symfile_finish(), and
init_header_files(), called from dbx_new_init().
* dbxread.c (dbx_new_init): Move deallocation things to new
dbx_symfile_finish function.
* elfread.c (elf_new_init): Call buildsym_new_init().
* objfiles.c (free_objfile): Call the appropriate symfile_finish()
routine for the objfile before deallocating other stuff.
* sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg.
* symfile.h: Move struct sym_fns to before struct objfile def.
Add sym_finish function pointer and change prototypes of other
function pointers to reflect passing struct objfile pointer rather
than struct sym_fns pointer.
* symfile.c: Remove now obsolete symtab_fns pointer.
* symfile.c (symfile_init): Renamed to find_sym_fns, and now only
locates the correct sym_fns struct for the given objfile.
* symfile.c (syms_from_objfile, symbol_file_add): Restructured
for better support of mapped symbol tables.
* symfile.c (symbol_file_command): Remove obsolete code using
symfile_fns.
* symfile.h: Remove duplicate declarations for symfile_objfile,
entry_point, and object_files.
* target.c (target_info): Compare symfile_objfile to NULL.
* xcoffread.c (aixcoff_new_init): Move deallocation stuff to
aixcoff_symfile_finish().
remote-hms.c, remote-mm.c, remote-nindy.c, remote-vx.c, remote.c,
target.c, target.h, valarith.c, valops.c, value.h, xcoffexec.c:
Remove to_call_function and target_call_function, since it
always calls the same thing (call_function_by_hand).
target.c: Add target_preopen and target_command.
Remove target_info.
(add_target): Call add_cmd and mess with targetlist->doc.
core.c, exec.c, remote-eb.c, remote-nindy.c, remote-vx.c,
remote-vx.68.c, inftarg.c, remote.c: Add doc field to target struct.
Call target_preopen from open routine.
