available.
* configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of
-ltcl and -ltk.
* gdbtk.c: Get rid of lots of unnecessary #includes.
* (gdbtk_init): Use ConnectionNumber macro instead of referencing
Display structure directly.
* gdbtk.tcl: Change exit button to quit button (makes shebs
happy).
<link.h>.
* i386b-nat.c: Add i386_float_info(), etc.
* config/i386/nm-nbsd.h: #define FLOAT_INFO.
* config/nm-nbsd.h: New file, for generic NetBSD native support.
* config/i386/nm-nbsd.h: Use it.
* config/sparc/nm-nbsd.h: Use it.
* config/ns32k/nm-nbsd.h: Use it.
* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
(ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/i386.
* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/ns32k.
of config/nm-trash.h.
* config/nm-trash.h: Remove.
* config/nm-empty.h: New file.
* config/i386/nm-m3.h: New file, includes config/nm-m3.h.
* config/mips/nm-m3.h: New file, includes config/nm-m3.h.
* config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/sparc/{nm,tm,xm}-nbsd.h: New files, renamed from
{nm,tm,xm}-sparcnbsd.h to conform to prefered file naming
conventions.
* configure.in: (sparc-*-netbsd): use config/sparc/nbsd.m[ht].
NLMCONV_FOR_TARGET. (SUBDIRS): Add nlm target.
* configure.in (powerpc-*-netware*): Automatically configure nlm
subdir.
* nlm/Makefile.in: Add {CC NLMCONV LD}_FOR_TARGET. Remove alpha
specific stuff. Make things more configurable.
* nlm/configure.in: Add powerpc-*-netware* target. Use
gdbserve.mt/cpu.c/cpu.h for target stuff. Get rid of tm/xm/nm.h
files.
* nlm/gdbserve.c: Move Alpha specific stuff into other files.
Remove lots of architecture-specific stuff.
* nlm/gdbserve.def: Add new imports.
* nlm/ppc.c, nlm/ppc.h: New files that contain PowerPC specific code.
* nlm/prelude.c: Don't include libhooks.h, get rid of call to
register library.
* nlm/prelude.o: What was this doing here?
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
(i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
m88*-*-mach3*, ns32k-*-mach3*): Recognize.
* Makefile.in (gdb-stop): New target.
* gdb-stop.c: New file, utility to gets attention of waiting GDBs
in Mach 3.
target.
* defs.h (enum language): Add language_asm.
* findvar.c (read_register_bytes read_register_gen
write_register_bytes read_register read_register_pid
write_register write_register_pid supply_register): Move multi-
thread handling down into these routines. Create XXX_pid routines
that allow register references to specify the pid.
* findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid
read_sp write_sp read_fp write_fp): Move these routines from
infcmd to findvar to centralize the whole mess.
* i386-nlmstub.c: Portability fixes.
* infptrace.c (child_resume): Conditionalize to allow other natives
to override it. Remove PIDGET gubbish, it's no longer necessary.
* infrun.c (wait_for_inferior): Put registers_changed() before
target_wait() to speed up remote debugging.
* Replace code that reads registers from other threads with much
nicer looking new function calls (see changes to findvar.c).
* Don't skip prologues if debugging assembly source.
* lynx-nat.c (child_resume): Lynx now needs it's own version of
child_resume to handle multi-thread debugging properly.
* remote.c: Add O response to get console output from target.
* (readchar): Add timeout parameter. Handle SERIAL_EOF and
SERIAL_ERROR here to simplify callers.
* Change static var timeout to remote_timeout.
* (fromhex): Remove unnecessary return -1 at end of routine.
* (remote_wait): Turn this into a big switch statement. Add
support for O response.
* (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR.
* (getpkt): Split getpkt into two parts. read_frame deals with
all formatting issues, run-length encoding, and framing. getpkt
now handles error recovery, and frame detection.
* ser-tcp.c (tcp_readchar): Handle EINTR from read().
* ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem
control. (hardwire_readchar): Handle EINTR from read().
* symfile.c (deduce_language_from_filename): Add support for .s
files.
* config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can
override infptrace's child_wait.
* config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h
instead of XXXlynx.h.
* config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of
tm-rs6000lynx.h.
* nlm/gdbserve.c: Portability fixes.
* Makefile.in (kdb): Remove old init.c creation commands.
* configure.in (sparclite): Match on sparclite*.
* sparclite/aload.c (main): Only change section addresses for
a.out format object files.
are in the .plt section.
* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): New functions for handling
stepping into -g compiled shared libraries.
* symtab.h (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): Add prototypes.
* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
Define to handle stepping into -g compiled shared libraries.
* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle
stepping into -g compiled shared libraries.
* configure.in: Add mips-*-sysv4* support.
* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
New files for MIPS SVR4 support.
* Makefile.in: Update for new mipsv4 files.
* alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use
read_next_frame_reg to obtain the frame relative stack pointer.
* mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to
obtain the frame relative stack pointer.
* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
by entering them into the minimal symbol table.
* printcmd.c (print_scalar_formatted): Do not try to unpack to
a long for float formats.
* solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
get defined in <link.h>.
* solib.c (solib_add): Add shared library sections to the section
table of the target before adding the symbols.
* partial-stab.h: Relocate static and global functions.
* dbxread.c (read_dbx_symtab): Remove unused variable
end_of_text_address. Relocate text_addr when passing it
to end_psymtab.
For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
library functions before the executable is run. Retrieve dynamic
symbols from stripped executables.
* mipsread.c (read_alphacoff_dynamic_symtab): New function.
* mipsread.c (mipscoff_symfile_read): Use it. Issue warning message
if no debugging symbols were found.
* alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered
pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
is defined.
* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define,
OSF/1 has shared libraries.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c
Makefile.in configure.in
Added Files:
os9kread.c os9kstab.c remote-os9k.c
* os9kread.c: New file to read os9000 style symbo table.
* os9kstab.c: new file to read os9000 style stabs.
* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
* objfiles.c (find_pc_objfile): new function to search objfile
from pc.
* objfiles.c (objfile_relocate_data): new function to relocate
data symbols in symbol table.
* objfiles.h: Add two aux fields in struct objfile to handle
multiple symbol table files situation like in os9000.
* symfile.c: Change so 'symbol-file' command can handle multiple
files. Also call target_link() to get relocation infos.
* target.c (target_link): new function to get relocation info when
a symbol file is requested to load.
* main.c (quit_command): take out 'inferior_pid != 0' condition,
because in cross mode there's no inferior pid, bit they need to
be detached.
Makefile.in: add os9kread.c os9kstab.c and .o's.
configure.in: add i386os9k target.
config/i386/i386os9k.mt: new add.
config/i386/tm-i386os9k.h: new add.
* configure.in (mips-sgi-irix5*): New host and target. Use irix5
for both.
* config/mips/irix5.mh, config/mips/irix5.mt,
config/mips/xm-irix5.h, config/mips/nm-irix5.h,
config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support.
* mdebugread.c: New file, split out of mipsread.c. Added
elfmdebug_build_psymtabs routine. Added some checks on external
symbols. Changed code to keep ecoff_debug_info and
ecoff_debug_swap structs in the psymtab and in global pointers
rather than retrieving them from the bfd. Also changed to keep
the pending list with the psymtab rather than the objfile (each
psymtab for a single objfile points to the same pending list).
* mipsread.c: Bulk of file moved into mdebugread.c, leaving just
the sym_fns.
* Makefile.in (SFILES): Added mdebugread.c.
(OBS): Added mdebugread.o.
(mdebugread.o): New target.
* symfile.h: Declare mdebug_build_psymtabs and
elfmdebug_build_psymtabs.
* elfread.c (struct elfinfo): Added mdebugsect field.
(elf_locate_sections): Remember location of .mdebug section.
(elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug
section.
* infrun.c (AT_FUNCTION_START): Set to 0 if not already defined.
(wait_for_inferior): Use AT_FUNCTION_START if it is defined to see
if PC is at the start of a function.
* mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and
give it a default definition.
(mips_skip_prologue): Skip instructions which initialize $gp
register.
(in_sigtramp): New procedure, moved in from mipsread.c.
* config/mips/tm-mips.h: Declare in_sigtramp.
* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
New files.
* config/m68k/nm-apollo68b.h: Add more defines.
* configure.in: Recognize apollo target, not just host.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
