* Finalize merge from Hurd folk.
Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
* thread.c (thread_apply_command, thread_apply_all_command,
thread_command): Make sure TP is alive.
(thread_alive): New function.
Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
* infrun.c (sig_print_info): Deal better with long signal names.
Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
* thread.c (thread_id_to_pid): New function.
Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
* gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
set_thread_default_cmd_list, show_thread_default_cmd_list):
New variables. (set_thread_cmd, show_thread_cmd,
set_thread_default_cmd, show_thread_default_cmd): New functions.
Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
* gnu-nat.c (inf_startup): remove TASK parameter.
(inf_set_task): replace with new function (inf_set_pid).
* gdbthread.h: Add extern decl for thread_cmd_list.
* Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
* config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
satisfy symbol dependancy in solib.c (core_ops).
* target.[ch] conditionalize Mach-specific signals so that they
won't show up in non-Mach gdb's!
* thread.c: add function thread_id_to_pid; change name of static
function "thread_switch" to "switch_to_thread", to avoid conflict
with Mach global symbol; move thread_cmd_list to global scope
so targets can add their own thread commands.
* infrun.c: sig_print_info: allow for long signal names.
* gnu-nat.[ch]: tidying up comments.
* gnu-nat.c: move several functions to static scope, just for tidy;
remove calls to prune_threads and renumber_threads;
gnu_wait must not return -1 when inferior exits;
attach_to_child will modify inferior_pid in a way that allows
fork_inferior to remain unchanged;
remove extra arg from startup_inferior;
move mach-specific thread commands here from thread.c.
* procfs.c: Minor changes to make pre-ANSI compilers happy.
(procfs_notice_signals): Copy traced signal set back to
pi->prrun.pr_trace.
(unconditionally_kill_inferior): If PR_DEAD is defined,
rerun inferior after killing it.
floatformat_ieee_double_littlebyte_bigword for little endian
target byte order.
* utils.c (floatformat_to_doublest): Create local preswapped
copy of input for floatformat_littlebyte_bigword formats.
(get_field, put_field): Treat floatformat_littlebyte_bigword
the same as floatformat_little.
(floatformat_from_doublest): Postswap output words for
the floatformat_littlebyte_bigwords format.
does not require a command line arg, since most simulators
don't currently support passing such an arg into the simulated
program.
* gdb.base/commands.exp: Change tests to insert the proper
value as the arg to the first recursive factorial call. Change
compilation line to define FAKEARGV at compile time.
(DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
* xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
remove tadj.
* exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
tstart and dstart with section VMA.
* rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
object file.
(vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
(vmap_exec): Relocate relative to the VMA in the object file,
relocate .bss section as well.
(xcoff_relocate_core): No longer adjust section addresses by VMA.
* rs6000-tdep.c (find_toc_address): Change type of tocbase
to CORE_ADDR.
* xcoffread.c (secnum_to_bfd_section): New routine to get
BFD section from CS section number.
(scan_xcoff_symtab): Make toc_offset section relative.
* symtab.c (total_number_of_methods): Avoid core dump if
baseclass type is still undefined.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
o Provide poll_quit callback to simulators
so that they can poll for SIGINT on
clueless OS's.
o Add sim_stop to simulators so that clients
can request a halt (eg gdbtk's STOP button)
Works for PPC!
o Re-arange remote-sim.c so that the
hard work is moved from gdbsim_resume()
to gdbsim_wait() (where it should be).
(INSTALL_XFORM1): Remove.
(install-only): Use $(program_transform_name) directly, rather
than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
(uninstall): Transform name.
