This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
It has bothered me for a while that files in common/ use macros
defined via autoconf checks, but rely on each configure.ac doing the
proper checks independently.
This patch introduces common/common.m4 which consolidates the checks
assumed by code in common.
The rule I propose is that if something is needed or used by common,
it should be checked for by common.m4. However, if the check is also
needed by gdb or gdbserver, then it should be duplicated there.
Built and regtested on x86-64 Fedora 18 (though this is hardly the
most strenuous case) and using the Fedora 18 mingw cross compilers. I
also examined the config.in diffs to ensure that symbols did not go
missing.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4.
* common/common.m4: New file.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4, codeset.m4.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
The other day while debugging something related to random signals, I
got confused with "set debug infrun 1" output, for it said:
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal 20
On GNU/Linux, 20 is SIGTSTP. For some reason, it took me a few
minutes to realize that 20 is actually a GDB signal number, not a
target signal number (duh!). In any case, I propose making GDB's
output clearer here:
One way would be to use gdb_signal_to_name, like already used
elsewhere:
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal SIGCHLD (20)
but I think that might confuse someone too ("20? Why does GDB believe
SIGCHLD is 20?"). So I thought of printing the enum string instead:
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal GDB_SIGNAL_CHLD (20)
Looking at a more complete infrun debug log, we had actually printed
the (POSIX) signal name name a bit before:
infrun: target_wait (-1, status) =
infrun: 9300 [Thread 0x7ffff7fcb740 (LWP 9300)],
infrun: status->kind = stopped, signal = SIGCHLD
...
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4e8b94
infrun: random signal 20
So I'm now thinking that it'd be even better to make infrun output
consistently use the enum symbol string, like so:
infrun: clear_proceed_status_thread (Thread 0x7ffff7fca700 (LWP 25663))
infrun: clear_proceed_status_thread (Thread 0x7ffff7fcb740 (LWP 25659))
- infrun: proceed (addr=0xffffffffffffffff, signal=144, step=1)
+ infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT, step=1)
- infrun: resume (step=1, signal=0), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
+ infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 25659 [Thread 0x7ffff7fcb740 (LWP 25659)],
- infrun: status->kind = stopped, signal = SIGCHLD
+ infrun: status->kind = stopped, signal = GDB_SIGNAL_CHLD
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400700
- infrun: random signal 20
+ infrun: random signal (GDB_SIGNAL_CHLD)
infrun: random signal, keep going
- infrun: resume (step=1, signal=20), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
+ infrun: resume (step=1, signal=GDB_SIGNAL_CHLD), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 25659)] at 0x400700
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 25659 [Thread 0x7ffff7fcb740 (LWP 25659)],
- infrun: status->kind = stopped, signal = SIGTRAP
+ infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400704
infrun: stepi/nexti
infrun: stop_stepping
GDB's signal numbers are public and hardcoded (see
include/gdb/signals.h), so there's really no need to clutter the
output with numeric values in some places while others not. Replacing
the magic "144" with GDB_SIGNAL_DEFAULT in "proceed"'s debug output
(see above) I think is quite nice.
I posit that all this makes it clearer to newcomers that GDB has its
own signal numbering (and that there must be some mapping going on).
Tested on x86_64 Fedora 17.
gdb/
2013-10-23 Pedro Alves <palves@redhat.com>
* common/gdb_signals.h (gdb_signal_to_symbol_string): Declare.
* common/signals.c: Include "gdb_assert.h".
(signals): New field 'symbol'.
(SET): Use the 'symbol' parameter.
(gdb_signal_to_symbol_string): New function.
* infrun.c (handle_inferior_event) <random signal>: In debug
output, print the random signal enum as string in addition to its
number.
* target/waitstatus.c (target_waitstatus_to_string): Print the
signal's enum value as string instead of the (POSIX) signal name.
In the first hunk, the format string was off-by-one for cmd, and cmd
itself was larger than the maximum size required. cmd was reduced in
size and the format string adjusted.
In the second hunk, the format string was off-by-one for local_address,
remote_address and extra, although the buffers for the two addresses
were large enough for this not to matter. The specifiers for the two
addresses was corrected, and a number of unused variables including
extra were suppressed from parsing.
In the third hunk, the format string was off-by-one for name,
dependencies and status. This code was rewritten using strtok since
dependencies can be arbitrarily long.
gdb/
2013-10-23 Gary Benson <gbenson@redhat.com>
PR 16013
* common/linux-osdata.c (command_from_pid): Reduced size of cmd
from 32 to 18. Adjusted fscanf format string accordingly.
(Avoids leaving cmd unterminated.)
(print_sockets): Do not parse tlen, inode, sl, timeout, txq, rxq,
trun, retn or extra. (Avoids leaving extra unterminated.) Check
that local_address and remote_address will not overflow.
(linux_xfer_osdata_modules): Parse lines using strtok to avoid
leaving dependencies unterminated. Parse size as "%u" to match
definition.
- The Mach exception/signals escaped the TARGET_ -> GDB_ prefix change
done a while ago, but there's no real reason for that. I grepped
for TARGET_EXC and fixed all found, which unsurprisingly, means
darwin-nat.c needed fixing. I think the change there is as obvious
and trivial as it can get, so I'd be quite surprised if this broke
anything there somehow.
- GDB_SIGNAL_LAST's description string was unnecessarily inconsistent
with the enum name.
Built on x86_64 Fedora 17.
gdb/
2013-10-22 Pedro Alves <palves@redhat.com>
* include/gdb/signals.def (TARGET_EXC_BAD_ACCESS): Rename to
GDB_EXC_BAD_ACCESS.
(TARGET_EXC_BAD_INSTRUCTION): Rename to GDB_EXC_BAD_INSTRUCTION.
(TARGET_EXC_ARITHMETIC): Rename to GDB_EXC_ARITHMETIC.
(TARGET_EXC_EMULATION): Rename to GDB_EXC_EMULATION.
(TARGET_EXC_SOFTWARE): Rename to GDB_EXC_SOFTWARE.
(TARGET_EXC_BREAKPOINT): Rename to GDB_EXC_BREAKPOINT.
(GDB_SIGNAL_LAST): Change description string.
* common/signals.c (gdb_signal_from_host, do_gdb_signal_to_host):
Adjust to signal renaming.
* darwin-nat.c (darwin_decode_message): Likewise.
gdb/
2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* common/filestuff.c (gdb_fopen_cloexec): Remove initialization of
result variable. Rename variable fopen_e_ever_failed to
fopen_e_ever_failed_einval. Retry fopen only for errno EINVAL.
The ptid_t contructors, accessors and predicates are documented in
_three_ places, and each place uses a different wording.
E.g, the descriptions in the .c file of the new ptid_lwp_p, ptid_tid_p
weren't updated in the final revision like the descriptions in the .h
file were. Clearly, switching to a style that has a single central
description avoids such issues.
Worse, some of the existing descriptions are plain wrong, such as:
/* Attempt to find and return an existing ptid with the given PID, LWP,
and TID components. If none exists, create a new one and return
that. */
ptid_t ptid_build (int pid, long lwp, long tid);
The function does nothing that complicated. It's just a simple
constructor.
So this gets rid of all the unnecessary descriptions, leaving only the
ones near the function declarations in the header file, and
fixes/clarifies those that remain.
gdb/
2013-10-04 Pedro Alves <palves@redhat.com>
* common/ptid.c (null_ptid, minus_one_ptid, ptid_build)
(pid_to_ptid, ptid_get_pid, ptid_get_lwp, ptid_get_tid)
(ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p): Replace
describing comments with references to ptid.h.
* common/ptid.h: Remove intro description of constructors,
accessors and predicates.
(struct ptid): Reformat.
(minus_one_ptid, ptid_build, pid_to_ptid, ptid_get_pid)
(ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid): Change
describing comments.
If enabling PTRACE_O_TRACEFORK fails, we never test for
PTRACE_O_TRACESYSGOOD support. Before PTRACE_O_TRACESYSGOOD is checked,
we have:
/* First, set the PTRACE_O_TRACEFORK option. If this fails, we
know for sure that it is not supported. */
ret = ptrace (PTRACE_SETOPTIONS, child_pid, (PTRACE_TYPE_ARG3) 0,
(PTRACE_TYPE_ARG4) PTRACE_O_TRACEFORK);
if (ret != 0)
{
ret = ptrace (PTRACE_KILL, child_pid, (PTRACE_TYPE_ARG3) 0,
(PTRACE_TYPE_ARG4) 0);
if (ret != 0)
{
warning (_("linux_check_ptrace_features: failed to kill child"));
return;
}
ret = my_waitpid (child_pid, &status, 0);
if (ret != child_pid)
warning (_("linux_check_ptrace_features: failed "
"to wait for killed child"));
else if (!WIFSIGNALED (status))
warning (_("linux_check_ptrace_features: unexpected "
"wait status 0x%x from killed child"), status);
return; <<<<<<<<<<<<<<<<<
}
Note that early return. If PTRACE_O_TRACEFORK isn't supported, we're
not checking PTRACE_O_TRACESYSGOOD. This didn't use to be a problem
before the unification of this whole detection business in
linux-ptrace.c. Before, the sysgood detection was completely
separate:
static void
linux_test_for_tracesysgood (int original_pid)
{
int ret;
sigset_t prev_mask;
/* We don't want those ptrace calls to be interrupted. */
block_child_signals (&prev_mask);
linux_supports_tracesysgood_flag = 0;
ret = ptrace (PTRACE_SETOPTIONS, original_pid, 0, PTRACE_O_TRACESYSGOOD);
if (ret != 0)
goto out;
linux_supports_tracesysgood_flag = 1;
out:
restore_child_signals_mask (&prev_mask);
}
So we need to get back the decoupling somehow. I think it's cleaner
to split the seperate feature detections to separate functions. This
patch does that. The new functions are named for their counterparts
that existed before this code was moved to linux-ptrace.c.
Note I've used forward declarations for the new functions to make the
patch clearer, as otherwise the patch would look like I'd be adding a
bunch of new code. A reorder can be done in a follow up patch.
Tested on x86_64 Fedora 17.
gdb/
2013-10-03 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_check_ptrace_features): Factor out
the PTRACE_O_TRACESYSGOOD and PTRACE_O_TRACEFORK to separate
functions. Always test for PTRACE_O_TRACESYSGOOD even if
PTRACE_O_TRACEFORK is not supported.
(linux_test_for_tracesysgood): New function.
(linux_test_for_tracefork): New function, factored out from
linux_check_ptrace_features, and also don't kill child_pid here.
It is possible to have a build of glibc where SYS_perf_event_open is not
defined (because when the glibc was compiled, the syscall did not exist),
but have newer kernel headers installed so that linux/perf_event.h is
available. In this setup, you get a build failure:
./common/linux-btrace.c: In function 'kernel_supports_btrace':
./common/linux-btrace.c:316:23: error: 'SYS_perf_event_open' undeclared (first use in this function)
Update the ifdef check to also see if the syscall is available.
URL: https://bugs.gentoo.org/473522
Reported-by: William Throwe <wtt6@cornell.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
As uintptr_t is used stdint.h must be included on all architectures.
2013-08-28 Will Newton <will.newton@linaro.org>
* common/linux-ptrace.c: Include stdint.h unconditionally.
* Makefile.in (SFILES): Remove common/target-common.c and
add target/waitstatus.c.
(HFILES_NO_SRCDIR): Remove common/target-common.h and add
target/resume.h, target/wait.h and target/waitstatus.h.
(COMMON_OBS): Remove target-common.o and add
waitstatus.o.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* common/target-common.c: Move contents to
target/waitstatus.c and remove.
* common/target-common.h: Move contents to other files and
remove.
(enum resume_kind: Move to target/resume.h.
(TARGET_WNOHANG): Move to target/wait.h.
(enum target_waitkind): Move to target/waitstatus.h.
(struct target_waitstatus): Likewise.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
* target/resume.h: New file.
* target/wait.h: New file.
* target/waitstatus.h: New file.
* target/waitstatus.c: New file.
gdb/gdbserver/
* Makefile.in (INCLUDE_CFLAGS): Include -I$(srcdir)/../.
(SFILES): Remove $(srcdir)/common/target-common.c and
add $(srcdir)/target/waitstatus.c.
(OBS): Remove target-common.o and add waitstatus.o.
(server_h): Remove $(srcdir)/../common/target-common.h and
add $(srcdir)/../target/resume.h, $(srcdir)/../target/wait.h
and $(srcdir)/../target/waitstatus.h.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
http://sourceware.org/ml/gdb-patches/2013-08/msg00340.html
gdb/ChangeLog
* common/format.c (parse_format_string): Don't allow '#' flag for
pointer arguments in format string.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_printf): Add test for printf of
pointer with various flags.
http://sourceware.org/ml/gdb-patches/2013-07/msg00322.html
gdb/ChangeLog
* common/format.c (parse_format_string): Add checks for NULL
character before calling strchr.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_printf): Add tests for format
strings with missing format specifier.
2013-07-04 Yao Qi <yao@codesourcery.com>
Revert:
2013-06-27 Yao Qi <yao@codesourcery.com>
* common/create-version.sh: Update comments. Handle the case
that TARGET_ALIAS is empty.
gdb/gdbserver/
2013-07-04 Yao Qi <yao@codesourcery.com>
* Makefile.in (host_alias): Use @host_noncanonical@.
(target_alias): Use @target_noncanonical@.
* configure.ac: Use ACX_NONCANONICAL_TARGET and
ACX_NONCANONICAL_HOST.
* configure: Regenerated.
Revert:
2013-06-28 Mircea Gherzan <mircea.gherzan@intel.com>
* configure.ac (version_host, version_target): Set and AC_SUBST them.
* configure: Rebuild.
* Makefile.in (version_host, version_target): Get from configure.
(version.c): Use $(version_host) and $(version_target).
This reverts part of the earlier version.in change. It moves
version.in back to the gdb directory. This works around the CVS bug
we've found.
gdb
* Makefile.in (version.c): Use version.in, not
common/version.in.
* common/create-version.sh: Likewise.
* common/version.in: Move...
* version.in: ...here.
gdb/doc
* Makefile.in (version.subst): Use version.in, not
common/version.in.
* gdbint.texinfo (Versions and Branches, Releasing GDB):
Likewise.
gdb/gdbserver
* Makefile.in (version.c): Use version.in, not
common/version.in.
sim/common
* Make-common.in (version.c): Use version.in, not
common/version.in.
* create-version.sh: Likewise.
sim/ppc:
* Make-common.in (version.c): Use version.in, not
common/version.in.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_traceframe_info): Push trace state variables
present in the trace data into the traceframe info object.
* breakpoint.c (DEF_VEC_I): Remove.
* common/filestuff.c (DEF_VEC_I): Likewise.
* dwarf2loc.c (DEF_VEC_I): Likewise.
* mi/mi-main.c (DEF_VEC_I): Likewise.
* common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
* features/traceframe-info.dtd: Add tvar element and its
attributes.
* tracepoint.c (free_traceframe_info): Free vector 'tvars'.
(build_traceframe_info): Push trace state variables present in the
trace data into the traceframe info object.
(traceframe_info_start_tvar): New function.
(tvar_attributes): New.
(traceframe_info_children): Add "tvar" element.
* tracepoint.h (struct traceframe_info) <tvars>: New field.
* NEWS: Mention the change in GDB and GDBserver.
gdb/doc:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Traceframe Info Format): Document tvar element and
its attributes.
gdb/gdbserver:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* tracepoint.c (build_traceframe_info_xml): Output trace state
variables present in the trace buffer.
This new script has one small snafoo, which prevented the $host_alias
and $target_alias from being expanded during the generation of the
version.c file. As a result, the version info yields:
This GDB was configured as "--host=$host_alias --target=$target_alias".
^^^^^^^^^^^ ^^^^^^^^^^^^^
This patch fixes this issue.
gdb/ChangeLog:
* common/create-version.sh: Fix expansion of $host_alias
and $target_alias in generation of HOST_NAME and TARGET_NAME
(resp.).
Right now there are two nightly commits to update a file in the tree
with the current date. One commit is for BFD, one is for gdb.
It seems unnecessary to me to do this twice. We can make do with a
single such commit.
This patch changes gdb in a minimal way to reuse the BFD date -- it
extracts it from bfd/version.h and changes version.in to use the
placeholder string "DATE" for those times when a date is wanted.
I propose removing the cron job that updates the version on trunk, and
then check in this patch.
For release branches, we can keep the cron job, but just tell it to
rewrite bfd/version.h. I believe this is a simple change in the
crontab -- the script will work just fine on this file.
This also moves version.in and version.h into common/, to reflect
their shared status; and updates gdbserver to use version.h besides.
* common/create-version.sh: New file.
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(HFILES_NO_SRCDIR): Use common/version.h.
* version.in: Move to ...
* common/version.in: ... here. Replace date with "DATE".
* version.h: Move to ...
* common/version.h: ... here.
gdbserver:
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(version.o): Remove.
* gdbreplay.c: Include version.h.
(version, host_name): Don't declare.
* server.h: Include version.h.
(version, host_name): Don't declare.
doc:
* Makefile.in (POD2MAN1, POD2MAN5): Use version.subst.
(GDBvn.texi): Use version.subst.
(version.subst): New target.
(mostlyclean): Remove version.subst.
We've currently got 3 files doing open coded implementations of cpuid.
Each has its own set of workarounds and varying levels of how well
they're written and are generally hardcoded to specific cpuid functions.
If you try to build the latest gdb as a PIE on an i386 system, the build
will fail because one of them lacks PIC workarounds (wrt ebx).
Specifically, we have:
common/linux-btrace.c:
two copies of cpuid asm w/specific args, one has no workarounds
while the other implicitly does to avoid memcpy
go32-nat.c:
two copies of cpuid asm w/specific args, one has workarounds to
avoid memcpy
gdb/testsuite/gdb.arch/i386-cpuid.h:
one general cpuid asm w/many workarounds copied from older gcc
Fortunately, that last header there is pretty damn good -- it handles
lots of edge cases, the code is nice & tight (uses gcc asm operands
rather than manual movs), and is already almost a general library type
header. It's also the basis of what is now the public cpuid.h that is
shipped with gcc-4.3+.
So what I've done is pull that test header out and into gdb/common/
(not sure if there's a better place), synced to the version found in
gcc-4.8.0, put a wrapper API around it, and then cut over all the
existing call points to this new header.
Since the func already has support for "is cpuid supported on this proc",
it makes it trivial to push the i386/x86_64 ifdefs down into this wrapper
API too. Now it can be safely used for all targets and gcc will elide
the unused code for us.
I've verified the gdb.arch testsuite still passes, and this code compiles
for an armv7a host as well as x86_64. The go32-nat code has been left
ifdef-ed out until someone can test & verify the new stuff works (and if
it doesn't, figure out how to make the new code work).
URL: https://bugs.gentoo.org/467806
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
Tom Tromey <tromey@redhat.com>
* common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
New functions.
* common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
Declare.
* darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
(darwin_ptrace_him): Use unmark_fd_no_cloexec.
* inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
(inf_ttrace_prepare): Use mark_fd_no_cloexec.
Similarly to the remote code, agent commands are mostly ascii. Cast to
gdb_byte when treating the command buffer as raw memory bytes.
2013-04-19 Pedro Alves <palves@redhat.com>
* common/agent.c (agent_run_command): Add cast to gdb_byte *.
Attempting to build gdbserver with our copy of thread_db.h yields:
In file included from ../../../src/gdb/gdbserver/../common/gdb_thread_db.h:4:0,
from ../../../src/gdb/gdbserver/thread-db.c:30:
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:108:3: error: unknown type name ‘uint32_t’
In file included from ../../../src/gdb/gdbserver/../common/gdb_thread_db.h:4:0,
from ../../../src/gdb/gdbserver/thread-db.c:30:
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:199:5: error: unknown type name ‘uintptr_t’
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:269:3: error: unknown type name ‘intptr_t’
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:270:3: error: unknown type name ‘intptr_t’
We used to have a workaround for this, but the patch to import
gnulib's stdint.h removed it:
http://www.sourceware.org/ml/gdb-patches/2008-06/msg00050.html
and defs.h made to always include stdint.h. However, gdbserver
doesn't include stdint.h in its equivalent server.h.
Rather than working around the issue, I've imported a more recent
version from glibc, which itself includes <stdint.h>. Other than
copyright years and FSF snail mail address, the file hasn't been
touched since 2003 in glibc. AFAICS, our version was updated last in
2000-09-03.
A note on the apparent license change: before the previous patch, this
file's contents were part of gdb_thread_db.h, and we can see that its
license's text was changed in this patch
<http://sourceware.org/ml/gdb-patches/2009-03/msg00251.html>. That
was certainly just an easy to overlook grep/sed mistake that fell
through the cracks.
gdb/common/
2013-04-16 Pedro Alves <palves@redhat.com>
* glibc_thread_db.h: Update from upstream glibc
(git 568035b7874a099087b77f7bba3e36a1173787b0).
Having this on a separate file makes it easier to import a new version
-- one can just copy over instead of having to care about preserving
the GDB-specific bits.
2013-04-16 Pedro Alves <palves@redhat.com>
* common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ...
* common/glibc_thread_db.h: ... this new file ...
* common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it.
This patch:
http://sourceware.org/ml/gdb-patches/2009-04/msg00115.html
Changed behaviour by only defining LIBTHREAD_DB_SO if thread_db.h exists. The
definition of LIBTHREAD_DB_SO and LIBTHREAD_DB_SEARCH_PATH should be moved
outside of #ifdef HAVE_THREAD_DB_H.
This is based on a patch attached to the PR, however, it needed a
tweak, as it was it broke the HAVE_THREAD_DB_H path.
2013-04-16 Will Newton <will.newton@gmail.com>
Pedro Alves <palves@redhat.com>
PR build/11881
* common/gdb_thread_db.h (LIBTHREAD_DB_SO)
(LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef
HAVE_THREAD_DB_H.
pointer to expression string to parse_exp_1.
(create_excep_cond_exprs): Likewise.
* ax-gdb.c (agent_eval_command_one): Likewise.
(maint_agent_printf_command): Likewise.
Constify much of the string handling/parsing.
* breakpoint.c (set_breakpoint_condition): Pass const
pointer to expression string to parse_exp_1.
(update_watchpoint): Likewise.
(parse_cmd_to_aexpr): Constify string handling.
Pass const pointer to parse_exp_1.
(init_breakpoint_sal): Pass const pointer to parse_exp_1.
(find_condition_and_thread): Likewise.
Make TOK const.
(watch_command_1): Make "arg" const.
Constify string handling.
Copy the expression string instead of changing the input
string.
(update_breakpoint_location): Pass const pointer to
parse_exp_1.
* eval.c (parse_and_eval_address): Make "exp" const.
(parse_to_comma_and_eval): Make "expp" const.
(parse_and_eval): Make "exp" const.
* expression.h (parse_expression): Make argument const.
(parse_exp_1): Make first argument const.
* findcmd.c (parse_find_args): Treat "args" as const.
* linespec.c (parse_linespec): Pass const pointer to
linespec_expression_to_pc.
(linespec_expression_to_pc): Make "exp_ptr" const.
* parse.c (parse_exp_1): Make "stringptr" const.
Make a copy of the expression to pass to parse_exp_in_context until
this whole interface can be constified.
(parse_expression): Make "string" const.
* printcmd.c (ui_printf): Treat "arg" as const.
Handle const strings.
* tracepoint.c (validate_actionline): Pass const pointer to
all calls to parse_exp_1.
(encode_actions_1): Likewise.
* value.h (parse_to_comma_and_eval): Make argument const.
(parse_and_eval_address): Likewise.
(parse_and_eval): Likewise.
* varobj.c (varobj_create): Pass const pointer to parse_exp_1.
(varobj_set_value): Likewise.
* cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
constify string handling.
Pass const pointers to parse_and_eval_address and
parse_to_comman_and_eval.
* cli/cli-utils.c (skip_to_space): Rename to ...
(skip_to_space_const): ... this. Handle const strings.
* cli/cli-utils.h (skip_to_space): Turn into macro which invokes
skip_to_space_const.
(skip_to_space_const): Declare.
* common/format.c (parse_format_string): Make "arg" const.
Handle const strings.
* common/format.h (parse_format_string): Make "arg" const.
* gdbserver/ax.c (ax_printf): Make "format" const.
* python/python.c (gdbpy_parse_and_eval): Do not make a copy
of the expression string.
EIST transition, T-states, C1E, or Adaptive Thermal Throttling (AAJ122).
This results in sporadic test fails. Disable btrace on those processors.
gdb/
* common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
and signal.h.
(linux_supports_btrace): Add kernel and
cpuid check.
(kernel_supports_btrace): New function.
(cpu_supports_btrace): New function.
(intel_supports_btrace): New function.
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
for CHILD, ignore PTRACE_KILL errors, move the inner block variable
kill_status to outer block.
The "you have broken" bit of this text reads to me as if I had broken
it myself somehow. This patch eliminates that ambiguity.
2013-02-25 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
warning text.
This makes gdbserver share gdb's savestring, instead of baking its own.
Tested on x86_64 Fedora 17.
gdb/
2013-02-14 Pedro Alves <palves@redhat.com>
* utils.c (savestring): Don't #undef it. Move function to
common/common-utils.c.
* common/common-utils.c: Include gdb_string.h.
(savestring): Move here from utils.c.
* common/common-utils.h (savestring): Declare.
gdb/gdbserver/
2013-02-14 Pedro Alves <palves@redhat.com>
* tracepoint.c (save_string): Delete.
(add_tracepoint_action): Use savestring instead of save_string.
We need to cast the pointer up to 64bits so that the push works on x32
targets. For 64bit targets, this makes no difference.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
Pedro Alves <palves@redhat.com>
* common/linux-osdata.c (linux_xfer_osdata_fds): Decrease buffer
size parameter passed to readlink by one byte.
* fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
* linux-nat.c (linux_child_pid_to_exec_file): Ditto.
* nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.
* inf-child.c (inf_child_fileio_readlink): Decrease local buffer's
size by one byte.
gdb/gdbserver/
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
* hostio.c (handle_readlink): Decrease buffer size
parameter passed to readlink by one byte.
ARI fixes: move gdb_wait and gdb_stat headers to common subdirectory.
* gdb_stat.h: Delete. Moved to common directory.
* common/gdb_stat.h: New file.
* gdb_wait.h: Delete. Moved to common directory.
* common/gdb_wait.h: New file.
* Makefile.in (H_FILES_NO_SRC): Adapt to new header
location.
* contrib/ari/gdb_ari.sh (wait.h rule): Adapt to new gdb_wait.h
location.
(stat.h rule): Adapt to new gdb_stat.h location.
* common/linux-osdata.c: Include "gdb_stat.h" header instead of
<sys/stat.h> header.
* common/linux-ptrace.c: Include "gdb_wait.h" header instead of
<sys/wait.h> header.
gdbserver ChangeLog entry:
2012-11-15 Pierre Muller <muller@sourceware.org>
* configure.ac (AC_CHECK_HEADERS): Add wait.h header.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Use "gdb_stat.h" header instead of <sys/stat.h> header.
Use "gdb_wait.h" header instead of <sys/wait.h> header.
* lynx-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
* remote-utils.c: Use "gdb_stat.h" header instead of <sys/stat.h>
header.
* server.c: Remove HAVE_WAIT_H conditional. Use "gdb_wait.h" header
instead of <sys/wait.h> header.
* spu-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
* common/linux-ptrace.c: Change __i386__ to __i386__ || __x86_64__.
(linux_ptrace_test_ret_to_nx): Extend comment for x86_64. Change
__i386__ to __i386__ || __x86_64__. Extend code also for __x86_64__.
Extend code also for PaX support. Convert all gdb_assert to warning
calls.
The command line completion has spoiled me. Thus the lack of completion with
the "handle" command annoys me. Patch!
This does a few things:
- adds a VEC_merge helper
- adds a generic signal completer
- adds a completion handler for the "handle" command
- sets the completion handler for the "signal" command
URL: http://sourceware.org/bugzilla/show_bug.cgi?id=10436
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* common/gdb_string.h: ... here.
* common/vec.h: Remove #ifndef GDBSERVER conditional inclusion of
gdb_string.h and gdb_assert.h.
gdbserver/
* configure.ac: Add check for strstr.
* config.in: Regenerate.
* configure: Regenerate.
* linux-thread-db.c: #include "gdb_vecs.h".
(try_thread_db_load_from_pdir_1): New arg "subdir". All callers
updated.
(try_thread_db_load_from_pdir): New arg "subdir". All callers updated.
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
gdbserver/
* Makefile.in (SFILES): Add gdb_vecs.c.
(OBS): Add gdb_vecs.o.
(gdb_vecs_h, host_defs_h): New variables.
(thread-db.o): Add $(gdb_vecs_h) dependency.
(gdb_vecs.o): New rule.
* thread-db.c: #include "gdb_vecs.h".
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
* common/gdb_vecs.c: New file, contents from utils.c.
* common/host-defs.h: New file, contents from defs.h.
* utils.h: New file, contents from defs.h.
* defs.h: Move all declarations of objects defined in utils.c
to utils.h (except QUIT() and related).
#include "utils.h", "host-defs.h".
* probe.h (probe_p): Move here from gdb_vecs.h.
* symfile.c: #include "probe.h" instead of "gdb_vecs.h".
* utils.c (free_char_ptr_vec): Moved to common/gdb_vecs.c.
(dirnames_to_char_ptr_vec_append, dirnames_to_char_ptr_vec): Ditto.
* Makefile.in (SFILES): Add common/gdb_vecs.c.
(HFILES_NO_SRCDIR): Add common/gdb_vecs.h, common/host-defs.h, utils.h.
(COMMON_OBS): Add gdb_vecs.o.
(gdb_vecs.o): New rule.
from non-MI uses.
* common/linux-osdata.c (struct osdata_type): Add title field.
(osdata_table): Add titles to each entry.
(linux_command_xfer_osdata): Add a column for title data.
* gdb.texinfo (Miscellaneous GDB/MI Commands): Update -info-os
example, add note about title column.
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Describe new info os commands.
* common/linux-osdata.c (PID_T, TIME_T): Define.
(MAX_PID_T_STRLEN): New.
(linux_common_core_of_thread): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(command_from_pid): Add comment. Change to use PID_T.
(commandline_from_pid): Change to use PID_T.
(user_from_pid): Add comment.
(get_process_owner): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(get_number_of_cpu_cores): Add comment.
(get_cores_used_by_process): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(linux_xfer_osdata_processes): Change to use PID_T and
MAX_PID_T_STRLEN.
(compare_processes): New function.
(linux_xfer_osdata_processgroups): New function.
(linux_xfer_osdata_threads): Change to use PID_T.
(linux_xfer_osdata_fds): New function.
(format_socket_state, print_sockets): New functions.
(union socket_addr): New union.
(linux_xfer_osdata_isockets): New function.
(time_from_time_t, group_from_gid): New functions.
(linux_xfer_osdata_shm): New function.
(linux_xfer_osdata_sem): New function.
(linux_xfer_osdata_msg): New function.
(linux_xfer_osdata_modules): New function.
(osdata_table): Add new entries.
* common/buffer.c (buffer_xml_printf): Add support for long and
long long format specifiers.
* gdb.texinfo (Operating System Auxiliary Information): Document new
'info os' subcommands.
* gdb.base/info-os.exp: New file.
* gdb.base/info-os.c: New file.
* common/linux-procfs.c (linux_proc_get_int): New, from
linux_proc_get_tgid, change its LWPID type to pid_t, add parameter
field.
(linux_proc_get_tgid): Only call linux_proc_get_int.
(linux_proc_get_tracerpid): New.
(linux_proc_pid_has_state): New, from linux_proc_pid_is_zombie.
(linux_proc_pid_is_stopped, linux_proc_pid_is_zombie): Only call
linux_proc_pid_has_state.
* common/linux-procfs.h (linux_proc_get_tracerpid): New declaration.
* common/linux-ptrace.c: Include linux-procfs.h and buffer.h.
(linux_ptrace_attach_warnings): New.
* common/linux-ptrace.h (struct buffer, linux_ptrace_attach_warnings):
New declaration.
* linux-nat.c: Include exceptions.h, linux-ptrace.h and buffer.h.
(linux_nat_attach): New variables ex, buffer, message and message_s.
Wrap to_attach by TRY_CATCH and call linux_ptrace_attach_warnings.
gdb/gdbserver/
* linux-low.c (linux_attach_lwp_1): New variable buffer. Call
linux_ptrace_attach_warnings.
gdb/testsuite/
* gdb.base/attach-twice.c: New files.
* gdb.base/attach-twice.exp: New files.
gdb/gdbserver/
* linux-low.c (pid_is_stopped): Delete, moved to common/.
(linux_attach_lwp_1): Adjust to use linux_proc_pid_is_stopped.
gdb/
* linux-nat.c (pid_is_stopped): Delete, moved to common/.
(linux_nat_post_attach_wait): Adjust to use
linux_proc_pid_is_stopped.
* common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
* common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
based on pid_is_stopped from both linux-nat.c and
gdbserver/linux-low.c, and renamed.
* common/gdb_assert.h (gdb_static_assert): Rename static_assert to
an internal gdb_static_assert.
* mi/mi-common.c: Rename static_assert to gdb_static_assert.
The DSBT support is very close to the FDPIC code, so extend the existing
loadmap support to work with FDPIC loadmaps too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* linux-nat.c: Move common macros to ...
Include linux-ptrace.h.
* common/linux-ptrace.h: ... here. New.
gdb/gdbserver/
* linux-low.c: Move common macros to linux-ptrace.h.
Include linux-ptrace.h.
* Makefile.in (linux_ptrace_h): New.
(linux-low.o): Depends on linux-ptrace.h.
function call message.
(target_signal_to_host): Add _ markup and remove trailing new line
from warning call message.
(target_signal_from_command): Add _ markup to error function call
message.
* gdbserver/server.h (Macro _): Define it if not available.
* common/signals.c (ANY): Remove.
(SET): No longer use ANY.
include/gdb/
* signals.def: Replace all ANY uses by SET with specific numbers.
* signals.h (ANY): Remove.
* common/signals.c (signals): Move the content to signals.def.
Include it. Remove the INDENT comments.
gdb/gdbserver/
* Makefile.in (signals_def): New.
(server_h): Append include/gdb/signals.h and signals_def.
(server.o): Append signals_def.
include/gdb/
* signals.h (enum target_signal): Move the content to signals.def.
Include it.
* signals.def: New file.
