termination condition.
(full_filename): Don't prepend dirname if filename begins with /.
(breakpoint_notify, kernel_dispatch): Deal with DynamicLoad
messages properly!!
(getpty (NCR)): Lotsa bug fixes...
(kernel_dispatch (case StopRType)): Use kill() instead of
killpg() so we can deal with losing systems...
(wait_for_events): Work around NCR select() lossage. It doesn't
zero out readfds when select() returns zero.
(energize_initialize): Use I_SETSIG to get SIGIO interrupts. Use
getcwd() instead of getwd() (NCR getwd() seg faults).
(energize_wait): Use sigaction() for NCR. Their version of signal()
is unreliable by default.
places where we must notify kernel of where the given pc is.
(cplus_demangle): Put single-quotes around demangled names.
(energize_call_command): Call send_location() after doing up,
down, and frame commands.
pass at doc for two new remote targets---29K using UDI, and Tandem
ST2000 using STDBUG.
* doc/all.m4, doc/none.m4: new m4 switch, _ST2000__
* doc/all.m4: turn on H8/300 stuff for generic manual
(REGISTER_U_ADDR): Fix up for Ultrix 4.2.
* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR): Move macro to xm-tahoe.h.
* stack.c (_initialize_stack): "dow" should be a valid abbreviation
for "down". Suggested by Richard Stallman.
store_inferior_registers): Replace unexplained numbers
with manifest constants from a DECstation header file.
* xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>.
(REGISTER_U_ADDR): Fix up for Ultrix 4.2.
* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR): Move macro to xm-tahoe.h.
* stack.c (_initialize_stack): "dow" should be a valid abbreviation
for "down". Suggested by Richard Stallman.
* infptrace.c: HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c: Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
port.
* ser-termios.c: Big cleanup, use nicer coding conventions.
* ser-bsd.c: New module, serial stuff for BSD systems.
* serial.h: Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h: #define PTRACE_IN_WRONG_PLACE...
* infptrace.c: HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c: Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
port.
* ser-termios.c: Big cleanup, use nicer coding conventions.
* ser-bsd.c: New module, serial stuff for BSD systems.
* serial.h: Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h: #define PTRACE_IN_WRONG_PLACE...
* doc/gdb.texinfo: fix shameful error of agreement reported by
jimb@occs.cs.oberlin.edu (Jim Blandy)
* doc/gdb.texinfo: remove old partial discussion of remote serial
protocol (via serial debug stubs)
* doc/gdbinv-m.m4.in, doc/gdbinv-s.m4.in: new section discussing
use of serial debug stubs
should include a ser-XXX.o module.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
* serial.h (EXFUN): Remove all uses, convert to PARAMS.
* config/sun4os4.mh: Include ser-termios.o. FIXME, all .mh files
should include a ser-XXX.o module.
* dbxread.c (elfstab_build_psymtabs): Remove DEFUN crap.
* defs.h, i960-pinsn.c, remote-hms.c: Replace CONST with simple const.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
sub-variants of SunOS, e.g. sunos4* to match sunos4.1.1.
(sparc-*-sunos3): Remove host & target. Sunos3 never shipped
in production on Sun-4.
({a29k,i[34]86,i960}-*-elf): Add targets, equivalent to coff.
(m68k-*-{aout,coff,elf}): Add targets, w/new config and tm files.
(sparc-*-{aout,coff,elf}): Add targets, w/new config and tm files.
* tm-68k-un.h, tm-68k-noun.h, tm-spc-un.h, tm-spc-noun.h: New
target definitions for embedded with and without underlines on
identifiers. FIXME -- this ought to be known by BFD instead.
* tm-sparc.h, tm-sun2.h, tm-sun3.h: Delete NAMES_HAVE_UNDERSCORE:
not a parameter of the CPU, but of the development environment.
* tm-es1800.h, tm-sunos.h, tm-vx68.h: Add NAMES_HAVE_UNDERSCORE.
language for current compilation unit being processed.
* dwarfread.c (set_cu_language): New local function to decode
and record language for current compilation unit being processed.
* dwarfread.c (synthesize_typedef): Add local function to
synthesize a typedef for C++ classes, structs, unions, and
enumerations.
* dwarfread.c (read_structure_scope): Synthesize typedefs
for C++ classes, structs and unions.
* dwarfread.c (read_enumeration): Synthesize typedefs for
C++ enumerations.
* dwarfread.c (read_file_scope): Call set_cu_language to
record language for current compilation unit. After symtab
is built, save this recorded language.
* dwarfread.c (process_dies, add_partial_symbol, struct_type,
scan_partial_symbols, new_symbol): Recognize TAG_class_type.
* dwarfread.c (add_partial_symbol): Synthesize partial symbol
typedefs for C++ classes, structs, unions, and enumerations.
* dwarfread.c (scan_compilation_units): Call set_cu_language
to record language for current compilation unit.
* dwarfread.c (scan_partial_symbols): Call add_enum_psymbol here
for TAG_enumeration_types, rather than in add_partial_symbol.
* dwarfread.c (add_partial_symbol): Combine TAG_enumeration_type
case with class, struct, and union type cases, now that they are
the same. Remove tests for non-NULL name attributes, now done
by callers.
* gdbtypes.h (TYPE_CODE_CLASS): Add type for C++ classes, but
treat as alias for TYPE_CODE_STRUCT for now.
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset):
Use "regi" for local indexing through register numbers, reserving
"regno" for the name of a specific register passed as an input
parameter. Fix bug propagated through all versions that sometimes
used regno as an index when it should have been regi, thus using
-1 as an index in some cases.
respectively, so same demangler can be used by other programs.
* Makefile.in: Remove demangler stuff.
* Makefile.in (depend): Pass -I../readline (needed for main.c).
* demangle.c (_initialize_demangler): Tell demangler which
CPLUS_MARKER to assume.
follow the consistent pattern of struct work_stuff pointer first,
followed by pointer into string being demangled, followed by
pointer to the string where the result is being stored, followed
by other args. Also generally replace most variables of name
"type" with "mangled" for consistency. They all pointed to the
same string but half were one name and half the other.
* cplus-dem.c (LONGERNAMES): Remove #ifndef's.
* cplus-dem.c (demangle_qualified): Rewrite to clean up and allow
use whenever a qualified name is being demangled.
* cplus-dem.c (do_type): Qualified names are treated similarly
to fundamental types, not as modifiers of fundamental types.
WARNING: (1) this has not yet been proofread as a printout---just eliminated
problems that TeX complained about.
(2) extraneous line breaks introduced in some examples, sometimes
in ridiculously long strings; this may falsify examples. Places
where I did this are marked by FIXME comments.
1) use makeinfo node defaulting
2) correct bad xref
3) use @display, @exdent, etc. as first approximation to Julia's
clever typewriter markup; **THIS WILL NEED STUDY AND REVISION**
4) introduce many nodes rather than ---- in "detailed reference" appendix
numbers, signal number ranges, and to recognize "all" to mean all
signals except those used by the debugger.
* infrun.c (SET_SIGS, UNSET_SIGS): Macros used in handle_command
to set or reset actions for specific signals.
types.
* stabsread.c (read_array_type, read_range_type, define_symbol):
Call alloc_type to alloc new types.
* stabsread.c (define_symbol): Move dbl_valu symbol field data
from type_obstack to symbol_obstack.
* stabsread.c (define_symbol): Move typedef_sym from type_obstack
to symbol_obstack.
* gdbtypes.h (TYPE_ALLOC): New macro to allocate space for data
associated with a type, using the same mechanism as was used to
allocate space for the type structure itself.
* coffread.c (patch_type, coff_read_struct_type,
coff_read_enum_type): Use TYPE_ALLOC.
* dwarfread.c (struct_type): Use TYPE_ALLOC.
* gdbtypes.c (create_array_type, check_stub_method,
allocate_cplus_struct_type): Use TYPE_ALLOC.
* mipsread.c (parse_symbol, parse_type): Use TYPE_ALLOC.
* stabsread.c (read_struct_type, read_array_type, read_enum_type,
read_range_type): Use TYPE_ALLOC.
symtab if one is not currently selected.
* utils.c (query): Call wrap_here before building the output
query string, to turn off wrapping and flush any buffered output.
Otherwise our query may end up in the wrap buffer and never be
seen by the user.
* eval.c (evaluate_subexp): Report error when attempting to
evaluate subscript for types without a target type, rather
than dumping core by using the NULL pointer.
* symfile.c (symbol_file_command): Forget current_source_symtab
and current_source_line when discarding symbol table.
work. (remote_wait): Change 'T' message parser to deal with new
improved format which allows stub to send an arbitrary bunch of
registers.
* sparc-stub.c: General cleanups. (trap_low, handle_exception):
make all this re-entrant by storing all state on the stack. Clean
up memory error trapping. (computeSignal, set_debug_traps):
make it all table driven. Make a start at a baud rate setting command.
* remote-vx.c: redefine malloc to avoid buggy declaration on
RS/6000 <rpc/types.h>.
xm-rs6000.h: include <sys/select.h> to define fd_set for
<rpc/svc.h> on RS/6000.
* gdbinv-s.m4.in: refrain from using @cartouche for just a few
examples (not consistent w others).
gdb.texinfo: issue disclaimer paragraph on cmdline options only
for generic vn of doc
Tue Aug 18 14:48:24 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: added FLAGS_TO_PASS variable, and passed it to
recursive invocations of make. Always create installation
directories.
* gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
conditionals; introduce a few generic switches that may be
useful for other cross-dev or dos-hosted configs.
* gdb.texinfo: fix typo in "info reg" description
application, and it will speak GDB remote protocol!
* remote.c (remote_wait): Change 'T' (expedited reply) message to
deal with arbitrary registers. Needed for sparc-stub,
use throughout, in place of compile time constant CPLUS_MARKER.
* cplus-dem.c (ARM_VTABLE_STRING, ARM_VTABLE_STRLEN): Add.
* cplus-dem.c (cfront_special): New function, as suggested
by pfieland@stratus.com.
* cplus-dem.c (forget_types): New function.
* cplus-dem.c (cplus_demangle): Call gnu_special, moved from
demangle_prefix().
* cplus-dem.c (mop_up): Call forget_types().
* cplus-dem.c (AUTO_DEMANGLING, GNU_DEMANGLING, LUCID_DEMANGLING):
Use throughout, instead of checking current_demangling_style.
* cplus-dem.c (demangle_signature): When finding an explicit
start of function args, forget all remembered types for
lucid/cfront style demangling.
* cplus-dem.c (demangle_prefix): In a sequence of two or more
underbar characters, use last pair as the delimiter. Hoist
gnu_special() call up to cplus_demangle(). Call cfront_special()
when appropriate.
* cplus-dem.c (cplus_special): Fix virtual table name demangling
for inherited classes.
* cplus-dem.c (demangle_args): Document quirks of numbered
references to previously seen types.
* dbxread.c (read_ofile_symtab, process_one_symbol):
Use AUTO_DEMANGLING rather than explicitly checking
current_demangling_style.
* demangle.h: Add some comments.
* demangle.h (AUTO_DEMANGLING, GNU_DEMANGLING, LUCID_DEMANGLING,
CFRONT_DEMANGLING): New macros.
* dwarfread.c (LCC_PRODUCER): Remove trailing space, which is
not found in the actual producer string produced by lcc.
* dwarfread.c (handle_producer): Use AUTO_DEMANGLING rather
than explicitly checking current_demangling_style.
disable_longjmp_breakpoint, set_longjmp_resume_breakpoint):
Check for duplicate breakpoints at the same address. Bug report
and preliminary fix from Dave Morrison, <drmorris@us.oracle.com>.
NULL under non-error conditions.
* dwarfread.c (read_file_scope): Guard against dereferencing NULL
returned from end_symtab for empty compilation units.
