here from config/i386/xm-i386mach.h, fix name.
* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
here from config/i386/xm-ptx4.h.
* config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h.
* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
more housekeeping
Also check for gregset_t and fpregset_t types.
* configure: Regenerate.
* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
is defined.
(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
and HAVE_FPREGSET_T are defined. These changes allow systems
like linux that are migrating to /proc support to use a single
configuration for both new and old versions.
* config/i386/linux.mt: Note that this is now for both a.out and
ELF systems.
* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
i386v4-nat.o
* config/i386/tm-linux.h (tm-sysv4.h): Include.
* config/i386/xm-linux.h (solib.h): Include
(SVR4_SHARED_LIBS): Define.
* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined.
* gdbserver/low-linux.c: New file.
* remote.c (remote_read_bytes): Fix aborts on larger packets.
* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
Define.
* stabsread.c (define_symbol): If register value is too large,
tell what it is and what max is.
from NUM_REGS to get number of general registers that we care about.
Update copyright to 1996.
* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
of number of general regs and number of floating point regs.
Update copyright to 1996.
definitions.
(TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
(IEEE_FLOAT): Moved here from tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
(FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
(SKIP_PROLOGUE): Moved here from tm-i386v.h.
(SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
(INNER_THAN): Moved here from tm-i386v.h.
(BREAKPOINT): Moved here from tm-i386v.h.
(DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
(ABOUT_TO_RETURN): Moved here from tm-i386v.h.
(REGISTER_SIZE): Moved here from tm-i386v.h.
(NUM_REGS): Moved here from tm-i386v.h.
(REGISTER_NAMES): Moved here from tm-i386v.h.
(EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
(FP_REGNUM): Moved here from tm-i386v.h.
(SP_REGNUM): Moved here from tm-i386v.h.
(PC_REGNUM): Moved here from tm-i386v.h.
(PS_REGNUM): Moved here from tm-i386v.h.
(FP0_REGNUM): Moved here from tm-i386aix.h.
(FPC_REGNUM): Moved here from tm-sun386.h.
(REGISTER_BYTES): Moved here from tm-i386aix.h.
(REGISTER_BYTE): Moved here from tm-i386aix.h.
(REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
(STORE_RETURN_VALUE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
(STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
(FRAME_CHAIN): Moved here from tm-i386v4.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
(FRAME_SAVED_PC): Moved here from tm-i386os9k.h
(FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
(FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
(FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
(PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
(POP_FRAME): Moved here from tm-i386v.h.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
tm-i386v.h
(print_387_control_word, print_387_status_word): Declare prototypes.
(struct frame_info, struct frame_saved_regs): Forward decls for
prototypes.
(SP_ARG0): Moved here from tm-i386v.h.
* config/i386/tm-i386v.h:
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(IEEE_FLOAT): Remove.
(START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(i386_skip_prologue): Remove prototype.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undef before redefine to 16 (no FP support).
(REGISTER_NAMES): Undef before redefine.
(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
(REGISTER_BYTES): Undef before redefine.
(REGISTER_BYTE): Undef before redefine.
(REGISTER_RAW_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_SIZE): Undef before redefine.
(MAX_REGISTER_RAW_SIZE): Undef before redefine.
(MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_TYPE): Undef before redefine.
(STORE_STRUCT_RETURN): Undef before redefine.
(EXTRACT_RETURN_VALUE): Undef before redefine.
(STORE_RETURN_VALUE): Undef before redefine.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_CHAIN): Undef before redefine.
(FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
(FRAME_SAVED_PC): Undef before redefine.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undef before redefine.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY): Remove.
(CALL_DUMMY_LENGTH): Remove.
(CALL_DUMMY_START_OFFSET): Remove.
(CALL_DUMMY_BREAKPOINT_OFFSET): Remove
(FIX_CALL_DUMMY): Remove.
(print_387_control_word): Remove.
(print_387_status_word): Remove.
(SP_ARG0): Remove.
* config/i386/tm-symmetry.h:
(TM_SYMMETRY_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(MAX_REGISTER_RAW_SIZE): Remove.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-ptx.h:
(TM_PTX_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(SDB_REG_TO_REGNUM): Remove obsolete commented out define.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-linux.h:
(TM_LINUX_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386v4.h:
(TM_I386V4_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAME_CHAIN): Moved to tm-i386.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
(FRAME_SAVED_PC): Remove.
(sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc.
(FRAME_NUM_ARGS): Remove.
* config/i386/tm-i386os9k.h:
(TM_I386OS9K_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(NUM_REGS): Undefine before redefining.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Move to tm-i386.h.
* config/i386/tm-i386nw.h:
(TM_I386NW_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386bsd.h:
(TM_I386BSD_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
* config/i386/tm-i386aix.h:
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FP_REGNUM): Remove.
(SP_REGNUM): Remove.
(PC_REGNUM): Remove.
(PS_REGNUM): Remove.
(FP0_REGNUM): Moved to tm-i386.h.
(NUM_REGS): Remove.
(REGISTER_NAMES): Remove.
(REGISTER_BYTES): Moved to tm-i386.h.
(REGISTER_BYTE): Moved to tm-i386.h.
(REGISTER_RAW_SIZE): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_TYPE): Removed.
(EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
(STORE_RETURN_VALUE): Moved to tm-i386.h.
* config/i386/tm-sun386.h:
(TM_SUN386_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undefine before defining.
(REGISTER_NAMES): Undefine before redefining.
(REGISTER_BYTES): Undefine before redefining.
(REGISTER_BYTE): Undefine before defining.
(FP_REGNUM): Undefine before defining.
(PC_REGNUM): Undefine before defining.
(FPC_REGNUM): Undefine before defining.
(REGISTER_RAW_SIZE): Undefine before defining.
(FRAME_CHAIN): Undefine before defining.
(FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
(FRAME_SAVED_PC): Undefine before defining.
(FRAME_NUM_ARGS): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Remove.
(MAX_REGISTER_VIRTUAL_SIZE): Remove.
(STORE_STRUCT_RETURN): Remove.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undefine before defining.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
(struct frame_info, struct frame_saved_regs): Remove forward decls
for prototypes.
* config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* defs.h: Test on name __WIN32__ rather than WIN32.
* inflow.c (new_tty): Likewise
* terminal.h: Likewise.
* utils.c (initialize_utils): Likewise.
* win32-nat.c (child_create_inferiror): Print error code when failing.
* config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
<link.h>.
* i386b-nat.c: Add i386_float_info(), etc.
* config/i386/nm-nbsd.h: #define FLOAT_INFO.
* config/nm-nbsd.h: New file, for generic NetBSD native support.
* config/i386/nm-nbsd.h: Use it.
* config/sparc/nm-nbsd.h: Use it.
* config/ns32k/nm-nbsd.h: Use it.
* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
(ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/i386.
* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/ns32k.
of config/nm-trash.h.
* config/nm-trash.h: Remove.
* config/nm-empty.h: New file.
* config/i386/nm-m3.h: New file, includes config/nm-m3.h.
* config/mips/nm-m3.h: New file, includes config/nm-m3.h.
* config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
* (nlm_symfile_read): Record bounds of main() so that backtrace
command will know where to stop.
* objfiles.c (objfile_relocate): Relocate entry point/func info
for backtrace as well.
* objfiles.h: Define values for invalid PCs for entry point info.
* symfile.c (init_entry_point_info): Initialize invalid values
with aforementioned macros.
* config/alpha/tm-alphanw.h: Turn on FRAME_CHAIN_VALID_ALTERNATE
to cause backtrace to stop when it gets back to main().
* config/i386/tm-i386nw.h: Ditto.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
Remove all conditionals and definitions for ptx.
I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
Fix addresses of floating point registers in REGISTER_U_ADDR.
STORE_STRUCT_RETURN now handles cc and gcc conventions.
FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
signal trampoline code work.
* config/i386/xm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
Remove KDB definitions.
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
valarith.c, valops.c, valprint.c, value.h, values.c: Replace
value with value_ptr. This is for the ptx compiler.
* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
"sec_ptr" typedef.
* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
#if 0 i386_float_info.
* symm-tdep.c (round): Remove. Also remove sgttyb.
* symm-tdep.c: Remove lots of stuff which duplicates stuff from
i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb.
* i386-tdep.c (i386_frame_find_saved_regs): Put in
I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
someday.
* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move
stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
symm-nat.c. Define CHILD_WAIT and declare child_wait().
* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
tm-i386v.h is apparently OK.
* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
USE_O_NOCTTY.
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
(CORE_ADDR)0, from target_link, since that is what it uses.
Process name at end, not during parsing (like we did before Kung's
change), so that -readnow and -mapped can appear anywhere.
Make text_relocation a local variable.
* config/i386/i386os9k.mt: Fix comment.
* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
* os9kread.c: Put "comments" after #endif inside /* */.
* stabsread.h: Add os9k_stabs variable.
* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
Set it.
* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
descriptor in global_symbols not local_symbols.
(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
descriptors.
(read_type): If os9k_stabs, accept function parameters after 'f'
type descriptor.
(read_array_type): If os9k_stabs, don't expect index type and
expect lower and upper to be separated by ',' not ';'.
(read_enum_type): If os9k_stabs, read a number before the first
enumeration constant.
(os9k_init_type_vector): New function.
(dbx_lookup_type): Call it when starting new type vector.
* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
* os9kstab.c: Removed.
* Makefile.in: Update accordingly.
* objfiles.c (objfile_relocate_data): Removed.
* remote-os9k.c (rombug_wait): Call objfile_relocate
not objfile_relocate_data.
* objfiles.h, objfiles.c: Remove find_pc_objfile.
* remote-os9k.c (rombug_wait): Call find_pc_section not
find_pc_objfile.
* main.c (quit_command): Check inferior_pid; revert Kung change.
* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
config/ns32k/ns32km3.mh: Define NAT_FILE.
* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
(it was inconsistent and namespace-wrong) to NM_M3_H.
* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
(m3_open): New function.
(m3_ops): Use it.
* TODO: Update Mach section.
* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
* defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
If BFD64, make a LONGEST a BFD_HOST_64_BIT.
* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
always just check against INT_MIN and INT_MAX (this also fixes things
if sizeof (long) > sizeof (int), e.g. Alpha).
* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
Don't define LONGEST or BUILTIN_TYPE_LONGEST.
* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
BUILTIN_TYPE_UNSIGNED_LONGEST.
* language.h, c-lang.c, ch-lang.c, m2-lang.c: Remove longest_int
and longest_unsigned_int.
* value.h (struct value): Just align to LONGEST, rather than worrying
about CC_HAS_LONG_LONG.
* valarith.c (value_binop, _initialize_valarith): Figure out type
ourself based on sizeof (LONGEST) rather than relying on
BUILTIN_TYPE_LONGEST. The point is that we don't depend on
CC_HAS_LONG_LONG anymore.
* valprint.c (val_print_type_code_int): Just call
extract_unsigned_integer directly, rather than going through
unpack_long.
* printcmd.c (decode_format): Remove code which would sometimes
change 'g' size to 'w' for integers. print_scalar_formatted handles
printing huge integers well enough, thank you.
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
valops.c (value_assign): Use REGISTER_CONVERT_TO_* only if
REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
Pass desired type to REGISTER_CONVERT_TO_*.
* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
Pass length of desired type to store/extract_floating.
* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
Use extract_floating and store_floating with length of desired type.
* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE): Add type
parameter to REGISTER_CONVERT_*.
* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Remove
versions for which REGISTER_CONVERTIBLE is always false.
* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
Remove, no longer used.
* alpha-tdep.c (alpha_register_convert_to_raw,
alpha_register_convert_to_virtual): New routines to handle
the different raw formats in alpha floating point registers.
* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use them.
config/mips/{mipsm3.mt,mipsm3.mh},
config/ns32k/{ns32km3.mt,ns32km3.mh}: Use correct names for TM_FILE
and XM_FILE. Replace host files *mach3-xdep.o with native
files *m3-nat.o. Replace host file os-mach3.o with native
file m3-nat.o.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
* config/i386/i386mach.c: Explain this is for the old (probably
non-functional and/or obsolete) Mach stuff.
* m3-nat.c, config/nm-m3.h,
i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
New files.
(TARDIRS): Add gdbserver.
* exec.c (print_section_info): Print entry point.
* i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
i386lynx-tdep.c. Add core file support.
* i386lynx-tdep.c: New module for Lynx/386 target dependant code.
* maint.c: Add `maint info sections' command to print info about all
sections that BFD knows about for exec and core files.
* sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
before putting frame on the stack. Consolidate writes to reduce
traffic for remote debugging.
* config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
* config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
* config/i386/nm-i386lynx.h: Add target_pid_to_str().
* config/i386/tm-i386lynx.h: Remove target_pid_to_str().
* sparclite/Makefile.in: Add deps to keep Sun make happy.
GDBSERVER_DEPFILES. Also remove much (but not all that could be
removed) crud inherited from gdb Makefile.in.
* config/i386/i386lynx.mh, config/sparc/sun4os4.mh: Define GDBSERVER_*.
* gdbserver/README: Say it works on Sun and change configuration
instructions slightly.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
* signals.h: Don't undefine signals anymore.
* main.c: Use job_control from serial.h.
* fork-child.c (fork_inferior): Use gdb_setpgid.
* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
* utils.c (quit): Use current_target->to_terminal_ours to figure
out whether we care about lack of job control, rather than __GO32__.
* utils.c: Include serial.h not terminal.h
(quit): Use job_control not TIOCGPGRP.
* terminal.h: Don't undefine TIOCGPGRP.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
* utils.c (quit): Use it.
* serial.h: Add SERIAL_UN_FDOPEN.
* utils.c (quit): Use it.
* ser-unix.c: Add process group to ttystate.
[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
* inflow.c: Include serial.h not terminal.h.
Use serial.h stuff to replace most of the maze of #ifdef's.
* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
SERIAL_SET_PROCESS_GROUP.
* inflow.c: Use them.
* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
Define HAVE_TERMIOS.
* Various: Remove all use of TIOC*_BROKEN.
own tm- & .mt files now. Also add sparclite to configdirs.
* go32-xdep.c: Dummy routines for sigsetmask & strlwr.
* config/i386/go32.mh: Nullify def of TERMCAP.
* config/i386/xm-go32.h: Get rid of redef of EIO.
* config/sparc/{sparclite.mh tm-sparclite.h}: New sparclite
specific configs. Very similar to sun4os4, but without solib.
* sparclite/{Makefile.in configure.in}: First cut at making this
dir configgable.
These implement a new serial line interface for talking to remote
targets.
* configure.in: Link ser-hardwire.c to ser-unix.c for all hosts,
EXCEPT go32, which gets ser-go32.c.
* remote.c: Use new serial interface. More remote-xxx's to be
converted later.
* ser-bsd.c, ser-termios.c: Removed.
* serial.c: New. Implements common operations for all serial
types.
* ser-unix.c: New. Unix specific serial operations for various
flavors of Unix (Posix, SysV, BSD).
* serial.h: Generic serial interface defs.
* config/i386/go32.mh, config/i386/i386bsd.h,
config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove
ser-bsd.o from XDEPFILES. All the magic is now handled in
configure.in.
config files moved to an appropriate config/<cpu> subdirectory.
* nm-*, xm-*, tm-*: All native, host, and target files, which
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.
