It wasn't documented (or likely used) and wastes time.
(try_open): If EXTEN is empty, don't try it.
* ldctor.c, lderror.c, ldexp.c, ldfile.c, ldindr.c, ldlang.c,
ldlex.l, ldmain.c, ldmisc.c, ldsym.c, ldver.c, ldwarn.c,
ldwrite.c, lexsup.c, mri.c, relax.c: Replace DEFUN macro calls
with normal function declarations.
* Move *.em to emultempl/*.em. Move *.sh to emulparams/*.sh.
Move *.sc-sh to scripttempl/*.sc.
* {emultempl,emulparams,scripttempl}/README: New files.
* sh.em, st2000.em, z8ksim.em, h8300hms.em, h8500hms.em: Files
removed, replaced with generic.em.
* h8300.sh, h8500.sh, h8300.sc, h8500.sc: Renamed from
h8[35]00hms.s[ch]. Change their contents to omit the "hms".
* *.em (*_get_script): Return script name instead of script contents.
* ldlang.c (lang_process): Change caller.
* ldlex.l, ldgram.y: Recognize -m option.
Check for input files after *all* options in grammar.
* ldmain.c (main): Check for -m options. Add default directory
for -m.
* mkscript.c: File removed.
* genscripts.sh: Take two more parameters, tooldirlib and libdir,
to add to the default LIB_PATH.
Look for input files in the new subdirectories.
Create the scripts in emulations subdirectory and don't filter
them through mkscript.
* configure.in: Make the emulations subdirectory.
* Makefile.in: Account for all of the above changes.
Remove unused .SUFFIXES. Get libgcc.a path with gcc
-print-libgcc-file-name instead of $(libdir)/libgcc.a.
Put CFLAGS last in the compilation rules.
Add -I../bfd to INCLUDES so sysdep.h is found.
* ldfile.c (try_open): If opening without the extension fails,
try with the extension even if -v or -V was given.
had_script is imported (from ldgram.y), not exported.
* ldgram.y (statement_list_opt): New nonterminal, either empty or
statement_list.
(section): Use statement_list_opt, not statement_list.
* m68kcoff.sc-sh: Gather constructors and destructors and define
__CTOR_LIST__ and __DTOR_LIST__ appropriately.
* sa29200.sc-sh: Gather constructors and destructors and define
___CTOR_LIST__ and ___DTOR_LIST__ appropriately.
(mips-idt-ecoff*): Added trailing '*'.
* config/mips-idtl.mt: New file; use EMUL of mipsidtl.
* mipsidtl.sh: New file; like mipsidt.sh, but little endian.
* Makefile.in (ALL_EMULATIONS): Added em_mipsidtl.o.
Conditionalize manual to maintain Cygnus, Hitachi versions in parallel.
(Texinfo conditionals are stable enough to permit this, at last!)
NOTE: @ignore'd passages from earlier versions DELETED; use CVS history
to retrieve if wanted.
gen-doc.texi, h8-doc.texi: manual configuration definitions.
Makefile.in: link config defn (`gen' by default) to configdoc.texi, included
by ld.texinfo
.Sanitize: add gen-doc.texi, h8-doc.texi
* ldindr.c (add_indirect): Keep more information in the alias
symbol chain.
* ldlang.c (wild_doit): Don't inherit NEVER_LOAD section
attribute from an input section.
* ldmain.c (Q_enter_file_symbols): Common section is NEVER_LOAD by
default. (Q_enter_file_symbos): Indirect symbols now are known by
their section, not a special symbol flag.
* ldsym.c (write_file_locals): Indirect symbols aren't local.
(write_file_globals): Write the mapping for an indirect symbol.
* relax.c (build_it): When forced to write a NEVER_LOAD section,
fill it with zeros.
specific emulation.
* mipsidt.sh: New file; emulation for IDT MIPS board.
* Makefile.in (ALL_EMULATIONS): Added em_mipsidt.o.
(em_mipsidt.c): New target. Uses mipsidt.sh and mips.sc-sh.
* config/mips-idt.mt: New file; sets EMUL to mipsidt.
* configure.in (mips-idt-ecoff): New target; uses mips-idt.
* ldlang.c (lang_relocate_globals): avoid possible hang with
undefined but unreferenced symbols.
* relax.c (relax_section): don't complain if the script file isn't
relaxable but -relax is set
* ldlang.c (lang_relocate_globals): avoid possible hang with
undefined but unreferenced symbols.
* relax.c (relax_section): don't complain if the script file isn't
relaxable but -relax is set
* mips.sc-sh: Put .scommon sections into .sbss section.
* ldmain.c (subfile_wanted_p): Preserve section of common symbols,
rather than always putting them in bfd_com_section.
* ldlang.c (lang_common): If a common symbol is not in
bfd_com_section, put in a section of the same name, rather than
always putting it in section COMMON.
* ldmain.c (subfile_wanted_p): If we already have a common
definition of a symbol, don't necessarily pull in an object file
that provides a non-common definition.
* ldlex.l (COMMAND): Accept -EB and -EL command line arguments,
returning OPTION_EB and OPTION_EL. gcc passes these to a MIPS
linker.
* ldgram.y (OPTION_EB, OPTION_EL): New tokens.
(command_line_option): Accept and ignore OPTION_EB and OPTION_EL.
* mips.sc-sh: New file. Ultrix, and hopefully other MIPS ECOFF
targets, linker script.
* mipslit.sh: New file. Little endian MIPS emulation.
* config/mips-lit.mt: New file. Use mipslit emulation.
* configure.in (mips-dec-ultrix*): Use target mips-lit.
* Makefile.in (ALL_EMULATIONS): Added em_mipslit.o.
(em_mipslit.c): New target. Uses mipslit.sh.
* ldwrite.c: Removed perform_relocation, copy_and_relocate, and
write_norel. All linking is now done via write_relax. Call
ldsym_write before calling write_relax.
* relax.c: Added copyright.
(write_relax): Renamed from write_relaxnorel. Added relocateable
argument. seclet_dump renamed to bfd_seclet_link.
* relax.h: Added copyright.
* m68kcoff.sc-sh: define _end as well as end, for consistency with
aout.sc-sh.
* configure.in: accept *-ericsson-ose for any m68k CPU.
* ldwrite.c (write_rel): don't always set SEC_HAS_CONTENTS flag
for each output section.
macro bfd_asymbol_bfd as appropriate.
* Makefile.in: Un-duplicate ldlex.c dependency.
* condigure.in: Replace my_host case table by sourcing
../bfd/configure.host. Allow std-host as the default.
* ldmisc.c: Change logic for C++ name demangling: There is
no initial '_' to remove from stab-derived function names.
* ld.texinfo: new doc.
* ldgram.y, ldlex.l: understand -y<symbol>
* ldmain.c (Q_enter_file_symbols): if had -y, lookup symbol and
print info. (add_ysym): new function.
* ldsym.h: (ldsym_type): new define SYM_Y.
ldlang.h, ldlex.h, ldmain.h, ldmisc.h, ldsym.h, ldver.h, ldwarn.h,
ldwrite.h, relax.h: Replace all uses of EXFUN and PROTO ansi-glue
macros with PARAMS. Recreational cleanup. Update copyrights.
* Support for i386-sysv.
configure.in: check for i386-*-sysv* and i386-*-sco*.
i386coff.sc-sh: rewrote to support SVR3 by default.
ldctor.c (find_constructors): preserve stat_ptr.
ldlang.c (wild_doit): initialize vma and size of new output
section to corresponding input section. This is required for
shared library support.
(lang_size_sections): don't modify vma and size of sections which
are never loaded (for shared libraries).
ldwrite.c (copy_and_relocate): copy the contents of any section
which has contents, not just sections which are loaded (for shared
libraries).
mri.o, relax.o): Indicate dependence on ldgram.h.
* ld.h (strip_symbols_type): Add value STRIP_SOME.
* ldgram.y (OPTION_RETAIN_SYMBOLS_FILE): New terminal token.
(lang_add_keepsyms_file): New function.
* ldlex.l: Handle "-retain-symbols-file".
* ldsym.c (keepsyms_file, kept_syms): New vars.
(process_keepsyms): New functihon; reads file, marks symbols for saving.
(write_file_locals): File symbols should always be kept.
(ldsym_write): Warn about "-retain-symbols-file" overriding "-S" and "-s".
Process retain-symbols file before setting symtab.
* ldsym.h (SYM_KEEP): New flag for ldsym_type flags.
(keepsyms_file, kept_syms): Declare them.
* ldmain.c (main): Non-fatal errors should still cause non-zero exit status
even with -r.
Added initial support for the z8k
* z8ksim.em, z8ksim.sc-sh, z8ksim.sh: new files
* configure.in, Makefile.in: modified to reflect above
* ldlang.c (lang_check): when linking conflicting architectures,
make the output file reflect at least one of the bad inputs.
please let me know, or plug them in yourself.
Wed Sep 9 11:52:58 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
added m68k-coff emulation mode, stolen from a29k emulation.
Almost certainly wrong, but perhaps better than sun3.
please let me know, or plug them in yourself.
Wed Sep 9 11:52:58 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
added m68k-coff emulation mode, stolen from a29k emulation.
Almost certainly wrong, but perhaps better than sun3.
Also fixed an error message in configure.in so that it started with
'***' like the other error messages do.
gld960.em, h8300hms.em, h8300xray.em, lnk960.em, st2000.em,
vanilla.em: Rename all (generated) ld__*.c files to em_.c.
This is one character shorter, and lets people build on
SVR3 system. (ld__h8300xray.[co] was the killer there;
h8300xray.sc-sh is also overlong, but seems harmless.)
Based on a patch from Jonathan Ryshpan <hitachi!amito!jon>.
* Makefile.in (clean): Fix typo mostclean -> mostlyclean.
* configure.in: Add host isc.
abs_output_section is what is required.
* ldwrite.c (ldwrite): use malloc to allocate the largest space
used, and pass that down.
* relax.c,relax.h (write_relaxnorel): use the passed malloc area rather
than alloca.
Tue Aug 18 13:41:36 1992 Ian Lance Taylor (ian@cygnus.com)
* configure.in: accept all m68K family members.
* Makefile.in: always create installation directories.
(1) reflect current name of linker (now "ld", not "gld");
(2) fill in missing portion of a reference to full manual;
(3) fix old random typo spotted while proofing above.
chars in filenames
* ldexp.c (exp_unop): pass down abs_output_section - now can have
unary -ve constants.
* ldlang.c (lang_finish): warn when an entry symbol supplied on
the command line can't be found.
* ldlang.c (lang_output_section_statement_lookup): initilize new
field. (wild_doit): if new field is not set, then stop output
section from being loadable.
(lang_enter_output_section_statement): set the field from the
NOLOAD keyword
* ldgram.y: new synax for NOLOAD. Removes a shift/reduce too.
* h8300hms.sc-sh, h8300hms.em: get -r right.
