* config/tc-mips.c (load_register): Add leading "0x" to the
output of sprintf_vma().
(macro): Likewise.
gas/testsuite/:
* gas/mips/ldstla-32-1.l: Update to handle leading zeroes.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
(TC_INIT_FIX_DATA): Initialize to 0, not NULL.
* config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
(md_apply_fix3): Delete fix_is_thumb variable; refer to
fixP->tc_fix_data directly in the sole place it was used.
Explicitly truncate value, *valP, fixP->fx_addnumber, and
fixP->fx_offset to 32 bits, for consistent behavior between 32-
and 64-bit hosts.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (struct proc_pending): New.
(unwind): Replace proc_start with proc_pending.
(unwind_diagnostic): Check unwind.proc_pending.sym.
(dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
Check if previous proc not closed. Record all entry points.
(dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
Set symbol sizes for entry points recorded in dot_proc. Check
arguments for consistency with respective .proc's.
(md_assemble): Replace unwind.proc_start with
unwind.proc_pending.sym.
gas/testsuite/
2005-05-27 Jan Beulich <jbeulich@novell.com>
* gas/ia64/proc.l: Adjust.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
and last_ptr. Check all in-use slots for first one with non-NULL
unwind_record. Don't reload end_ptr before second update round.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
BFD_RELOC_UNUSED when determining the width of the reloc.
* gas/Makefile.am: Have 'all' depend on 'info'.
* ld/Makefile.am: Have 'all' depend on 'info' and 'ld.1'.
* bfd/Makefile.in, binutils/Makefile.in, gas/Makefile.in
* ld/Makefile.in: Regenerate.
2005-05-19 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
relocations in unwind section.
gas/testsuite/
2005-05-19 Jan Beulich <jbeulich@novell.com>
* gas/ia64/reloc-uw.s: New.
* gas/ia64/reloc-uw.d: New.
* gas/ia64/reloc-uw-ilp32.d: New.
* gas/ia64/ia64.exp: Run new test.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
2005-05-17 Jan Beulich <jbeulich@novell.com>
* read.c (_find_end_of_line): New.
(find_end_of_line): New.
(HANDLE_CONDITIONAL_ASSEMBLY): Use it.
(read_a_source_file): Use it.
(s_globl): Use it.
(s_macro): Use it.
(get_line_sb): Use it.
(s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
(s_comm_internal): Likewise.
(s_lsym): Likewise.
(s_macro): Likewise.
(s_ignore): Use ignore_rest_of_line.
* read.h (find_end_of_line): Prototype.
(discard_rest_of_line): Remove prototype. #define to
ignore_rest_of_line.
gas/testsuite/
2005-05-17 Jan Beulich <jbeulich@novell.com>
* gas/mmix/err-byte1.s: Adjust expected error text on line 10.
* config/tc-v850.c (md_assemble): When creating a fix record the operand in the
tc_fix_data field.
(md_apply_fix3): When applying a resolved fix use the operand's insertion
procedure to store the value, if the operand has been recorded.
* gas/v850/split-lo16.s: Add test for a lo() pseudo reloc corrupting an ld.w
instruction.
* gas/v850/split-lo16.d: Add expected, correct (ie not corrupt) output.
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
* config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
Handle label-without-colon before ordinary dot-pseudo as an
ordinary label. Don't leak memory for label-without-colon alone
on a line. Don't mmixal-munge operands for dot-pseudos.
2005-05-10 Jan Beulich <jbeulich@novell.com>
* macro.c (get_any_string): Remove the two last parameters. Replace
references to the former expand parameter by using macro_alternate.
Simplify loop condition for checking for end-of-string.
(get_string): Remove redunant call to sb_skip_white.
(do_formals): Remove two last arguments to get_any_string.
(macro_expand): Likewise.
(expand_irp): Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_disp): Discard displacement entirely when zero and
not required by encoding constraints.
gas/testsuite/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/tlsd.[sd]: Adjust to not assume zero displacement will
actually be present in memory addressing.
* gas/i386/tlspic.[sd]: Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Disallow use of prefix separator
and comma in Intel mode.
include/opcode/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add ht and hnt.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
names to match ABI. Add more registers for 32-bit and 64-bit modes.
Make name array static and const. Adjust lookup to account for NULL
entries (standing for unused register numbers).
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Consider all matching instructions
when checking for string instruction after string-only prefix.
2005-05-06 Jan Beulich <jbeulich@novell.com>
* macro.c (new_formal, del_formal): New.
(do_formals): Use new_formal. Check for and parse qualifier. Warn if
required argument has default value. Stop looking for more formal
when there was a vararg one.
(macro_expand_body): Use new_formal and del_formal.
(macro_expand): Likewise. Initialize local variable err. Don't
return immediately when encountering an error. Warn when keyword
argument already had a value assigned. Eliminate duplicate clearing
of argument value. When current positional argument matches parameter
of vararg type, assign to it all the remaining arguments. Issue error
when required parameter does not have value.
(free_macro): Use del_formal.
(expand_irp): Initialize formal type. Free buffers associated with
formal prior to returning.
* macro.h (struct formal_struct): Add new field 'type' with new
enumeration type 'formal_type'.
* doc/as.texinfo: Document macro parameter qualifiers.
* NEWS: Mention new functionality.
gas/testsuite/
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add check for bad qualifier specification.
* gas/macros/badarg.l: Adjust.
* gas/macros/vararg.[sd]: New.
* gas/macros/macros.exp: Run new test.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
list traversal. Use bfd_section_list_prepend.
* config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
over the section list.
* config/tc-xtensa.c (xtensa_remove_section): Delete.
(xtensa_insert_section): Delete.
(xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
and bfd_section_list_prepend.
(xtensa_reorder_seg_list): Use bfd_section_list_remove and
bfd_section_list_insert_after.
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-multi.h (FAKE_LABEL_NAME): Defined.
* read.c (pseudo_set): Disallow symbol set to common symbol.
PR 857
* write.c (write_object_file): Report common symbol name when
disallowing local symbol set to common symbol.
(adjust_reloc_syms): Disallow local symbol set to undefined
symbol.
gas/testsuite/
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* gas/all/assign.s: Make `x' and `y' global.
2005-04-25 Jan Beulich <jbeulich@novell.com>
* macro.c (macro_expand_body): Replace locals indicator parameters
with actual macro_entry. New local variables macro_line and err.
Don't return when encountering an error, just record the fact.
Detect local symbol name colliding with parameter. Track line number
inside of macro expansion.
(do_formals): Move local variable name to wider scope. Check
parameter of the same name doesn't already exist. In MRI mode, also
check it doesn't collide with the argument count pseudo-parameter).
(define_macro): Add file and line number parameters. Remove local
variable namestr. New local variable error. Initialize macro_entry
members file, line, and name. Don't return when encountering an
error, just record the fact. Use %s in some diagnostics for read.c
to insert the macro name. Free macro_entry on error.
(macro_expand): Pass macro_entry to macro_epand_body. Don't return
when encountering an error, just record the fact.
(expand_irp): Don't return when encountering an error, just record
the fact.
* macro.h (macro_struct): New members name, file, and line.
(define_macro): Add file and line number parameters.
* read.c (s_macro): Pass file and line to define_macro. Tag warning
regarding pseudo-op redefinition with the file/line that macro
definition started at.
gas/testsuite/
2005-04-25 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add tests for collisions between/among macro
parameters and local symbols.
* gas/macros/badarg.l: Adjust.
(xg_is_narrow_insn, xg_expand_narrow): Remove. Merge into...
(xg_is_single_relaxable_insn): ...here. Add "targ" and "narrow_only"
parameters.
(xg_assembly_relax, xg_find_narrowest_format, relaxation_requirements,
convert_frag_narrow): Use new version of xg_is_single_relaxable_insn.
* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
include/opcode/ChangeLog:
* i386.h: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr. Provide aliases without hyphens.
opcodes/ChangeLog:
* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr.
2005-04-18 Jan Beulich <jbeulich@novell.com>
* macro.c (free_token): New, freeing all the memory associated with a
macro.
(do_formals): Move initializers to ...
(define_macro): ... here.
(delete_macro): Convert passed in name to lower case. Warn when
purging macro that doesn't exist. Use hash_jam instead of hash_delete.
gas/testsuite/
2005-04-18 Jan Beulich <jbeulich@novell.com>
* gas/macros/purge.[ls]: New.
* gas/macros/macros.exp: Run new test.
2005-04-15 Jan Beulich <jbeulich@novell.com>
* config/obj-elf.c (obj_elf_struct): New.
(elf_pseudo_table). Use it for .offset and .struct.
gas/testsuite/
2005-04-15 Jan Beulich <jbeulich@novell.com>
* gas/elf/struct.[sd]: New.
* gas/elf/elf.exp: Run new test.
hash table size can be set before it is used.
* hash.c: Use an unsigned long type for the size of the hash tables.
* hash.h (set_gas_hash_table_size): Update the prototype.
* config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
(normalize_address_expr): New function to sign-extend address
offsets that fit into 32 bits in 32-bit mode.
(macro_build_ldst_constoffset): Use normalize_address_expr()
instead of a handcoded sequence.
(load_register): Likewise. Report oversized numbers in a useful
way.
(macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
for constant addresses. Report oversized numbers in a useful way.
(mips_ip): Use normalize_address_expr() for addresses.
gas/testsuite/:
* gas/mips/ldstla-32.s: Exclude offsets that are now meant to fail
and include more instructions/offsets that are meant to succeed.
Use $4 instead $3 to avoid register dependencies.
* gas/mips/ldstla-32.d: Update accordingly.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/ldstla-32-mips3.d: New test based on the above, except
for mips3.
* gas/mips/ldstla-32-mips3-shared.d: Similarly, for PIC.
* gas/mips/ldstla-32-mips3.s: Source for the new tests.
* gas/mips/ldstla-32-1.s: New test for offsets that are meant to
fail.
* gas/mips/ldstla-32-mips3-1.s: Likewise, for mips3.
* gas/mips/ldstla-32-1.l: Stderr output for the new test.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
* gas/mips/mips.exp: Run the new tests.
* i386.h (i386_optab): Mark VIA PadLock instructions as ImmExt and
adjust them accordingly.
gas/ChangeLog:
* config/tc-i386.c (output_insn): Handle VIA PadLock instructions
similar to other instructions now that they're marked as ImmExt.
(gas_hash_table_size): New static variable.
(set_gas_hash_table_size): New function: Records a requested size for the hash tables.
(get_gas_hash_table_size): New function: Return a prime number near the requested size of the hash table.
(hash_new): Use get_gas_hash_table_size.
* hash.h: Add a prototype for set_gas_hash_table_size.
* as.c (show_usage): Add description of new switches: --hash-size and --reduce-memory-overheads.
(option_values): Add OPTION_HASH_TABLE_SIZE and OPTION_REDUCE_MEMORY_OVERHEADS.
(std_longpopts): Add entries for the new options.
(parse_args): Handle the new options.
* Makefile.am: Add a dependency of as.c on hash.h.
* Makefile.in: Regenerate.
* doc/as.texinfo: Document the new switches.
* NEWS: Mention the new switches.
2005-04-11 Jan Beulich <jbeulich@novell.com>
* NEWS: Mention these changes and their effects.
* macro.c (get_token): Use is_name_beginner/is_part_of_name/
is_name_ender.
(check_macro): Likewise.
(buffer_and_nest): Likewise. Permit multiple labels. Don't discard
labels together with the closing pseudo-op.
(macro_expand_body): Adjust comment. Range-check input before use.
Adjust mis-spelled diagnostic. Use is_name_beginner.
* read.c (try_macro): New.
(read_a_source_file): New static variable last_eol. Don't list
macro expansion lines more than once. Call try_macro.
(s_macro): Set section of line_label to absolute instead of undefined.
* doc/as.texinfo: Add information on the caveats of these changes.
gas/testsuite/
2005-04-11 Jan Beulich <jbeulich@novell.com>
* gas/macros/dot.[ls]: New.
* gas/macros/macros.exp: Run new test.
* as.h (rs_dummy): Define.
* symbols.c (symbol_X_add_number): New function.
* symbols.h (symbol_X_add_number): Declare.
* stabs.c (aout_process_stab): Tidy symbol frag setting.
* read.c (assign_symbol): New function, split out from s_set.
Use symbol_find_or_make. Leave fr_type of dummy frag as rs_dummy.
Fix COFF hacks for multi-emulation gas.
(s_set): Call assign_symbol. Remove "register" keyword.
(set_zero_frag): New function.
(pseudo_set): Always check for assignment to section syms.
Always set segment and frag of symbol, and likewise extern for
aout/bout. Handle assignment of sym=sym+/-const specially. Don't
special case exp.X_add_number non-zero for O_symbol expressions.
(equals): Use assign_symbol.
(xtensa_find_unaligned_branch_targets, get_aligned_diff,
future_alignment_required): Use branch_align_power to check section
alignment as well as xtensa_fetch_width when aligning branch targets.
2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
* elf.c (bfd_elf_set_group_contents): Ignore linker created
group section.
(assign_section_numbers): Accept link_info. Check SHT_GROUP
sections for relocatable files only. Remove the linker created
group sections.
(_bfd_elf_compute_section_file_positions): Pass link_info to
assign_section_numbers.
* elfxx-ia64.c (elfNN_ia64_object_p): New.
(elf_backend_object_p): Defined.
gas/
2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-ia64.c (start_unwind_section): Undo the change
of 2004-08-18.
(generate_unwind_image, dot_endp): Likewise.
* config/tc-ia64.c (ia64_handle_align): Move le_nop and
le_nop_stop arrays and initializers to file scope.
(md_begin): When generating code for anything other than
Itanium 1, use MMI instead of MFI NOP bundles as a filler.
2005-04-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.
gas/testsuite/
2005-04-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-pcrel.[sd]: New.
* gas/i386/i386.exp: Run new test.
* bfd/bfd-in2.h: Regenerate.
* bfd/elf32-arm.c (elf32_arm_is_target_special_symbol): Rename call to
bfd_elf32_is_arm_mapping_symbol_name.
(elf32_arm_output_symbol_hook): Likewise.
(arm_elf_find_function): Likewise, and include STT_NOTYPE in test for
mapping symbols.
(is_arm_mapping_symbol_name): Function moved from here...
* bfd/cpu-arm.c (bfd_elf32_is_arm_mapping_symbol_name): ...to here,
renamed and made global.
* gas/config/tc-arm.c (mapping_state): Change documentation in function
comment to cross-reference spec instead. Change type of mapping symbols
to BSF_NO_TYPE.
(arm_adjust_symtab): Don't change type of mapping symbols here.
* gas/testsuite/gas/arm/mapping.d: Update expected output.
* ld/testsuite/ld-arm/arm-app-abs32.d: Likewise.
* ld/testsuite/ld-arm/arm-app.d: Likewise.
* ld/testsuite/ld-arm/mixed-app.d: Likewise.
indicates whether personality routine index N has been output for this
section.
(mapping_state): tc_segment_info_data now struct not enum.
(arm_elf_change_section): Likewise, and marked_pr_dependency is now
handled on section change.
(create_unwind_entry): Previous code to output dependency removed.
(s_arm_unwind_fnend): Output dependency if it hasn't been done already
for this section.
* gas/config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
arm_segment_info_type.
(arm_segment_info_type): New struct.
* gas/testsuite/gas/arm/unwind.d: Update expected output.
(xtensa_frob_label): Compute "freq" before possibly switching frags.
Insert a LOOP_END frag before every loop target, and do not overload
DESIRE_ALIGN_IF_TARGET frags with loop end information.
(xg_assemble_vliw_tokens): Use do_align_targets.
(xtensa_fix_target_frags): Remove code to convert a
DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
negatable branch at the end of a loop.
(frag_can_negate_branch): Delete.
(xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
the use_longcalls flag is set. Do this before checking the segment.
(xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never
expand direct calls at this point.
(xtensa_set_frag_assembly_state): Set use_longcalls flag.
(xtensa_find_unmarked_state_frags): Likewise.
(md_assemble): Do not disable longcalls by setting is_specific_opcode.
(xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
(convert_frag_immed): Remove unnecessary check of is_specific_opcode.
* config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.
* config/tc-cris.c: Ditto.
(md_estimate_size_before_relax): Remove obsolete comment for
parameter "segment_type".
(md_begin): Document reason for cast of hash_insert argument.
(md_atof): Correct type of parameter "type".
xg_apply_fix_value and return a value to indicate success.
(md_pcrel_from): Skip check of fx_done. Return 0 if not PC-relative.
(xtensa_force_relocation): Remove checks for VTABLE relocs.
(xtensa_validate_fix_sub): New.
(xtensa_fix_adjustable): Remove check for external or weak symbols.
(tc_gen_reloc): Move code to handle difference of symbols and code to
apply tentative fix values to ...
(md_apply_fix3): ...here. Enable standard overflow checks for simple
8, 16, and 32 bit relocations. Apply fixes for slot-specific
relocations when linkrelax flag is not set.
* config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
(TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.
2005-03-17 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (i386_scale): Beautify error message.
(Intel syntax comments): Update.
(struct intel_parser_s): Add fields in_offset, in_bracket, and
next_operand.
(intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
Remove declarations.
(intel_bracket_expr): Declare.
(i386_intel_operand): Initialize new intel_parser fields. Wrap most
of the function body in a loop allowing to split an operand into two.
Replace calls to malloc and checks of it returning non-NULL with
calls to xmalloc/xstrdup.
(intel_expr): SHORT no longer handled here. Add comment indicating
comparison ops need implementation.
(intel_e04, intel_e04_1): Combine, replace recursion with loop.
Check right operand of - does not specify a register when parsing
the address of a memory reference.
(intel_e05, intel_e05_1): Combine, replace recursion with loop.
Check operands do not specify a register when parsing the address of
a memory reference.
(intel_e06, intel_e06_1): Likewise.
(intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
handle SHORT as well as unary + and -. Don't accept : except for
segment overrides or in direct far jump/call insns.
(intel_brack_expr): New.
(intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
intel_brack_expr.
(intel_e11): Replace chain of if/else-if by switch, alloing fall-
through in certain cases. Use intel_brack_expr. Add new diagnostics.
Allow symbolic constants as register scale value.
(intel_get_token): Replace call to malloc and check of return value
with call to xmalloc. Change handling for FLAT to match MASM's.
(intel_putback_token): Don't try to back up/free current token if
that is T_NIL.
gas/testsuite/
2005-03-17 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.d: Add stderr directive.
* gas/i386/intel.e: New.
* gas/i386/intel16.d: Add stderr directive. Adjust for changed
source.
* gas/i386/intel16.e: New.
* gas/i386/intel16.s: Add instances of addressing forms with base
and index specified in reverse order.
* gas/i386/intelbad.l: Adjust for changed source.
* gas/i386/intelbad.s: Add more operand forms to check.
* gas/i386/intelok.d: Remove -r from objdump options. Add stderr
directive. Adjust for changed source.
* gas/i386/intelok.e: New.
* gas/i386/intelok.s: Define MASM constants byte, word, etc. Add
more operand forms to check.
* gas/i386/x86_64.d: Add stderr directive.
* gas/i386/x86_64.e: New.
* gas/i386/x86_64.s: Adjust for parser changes.
