bfd_elf32_slurp_reloc_table, bfd_elf64_write_relocs, and
bfd_elf64_slurp_reloc_table.
* elfcode.h (elf_write_relocs, elf_slurp_reloc_table): New
definitions to get external names.
(elf_write_relocs): Renamed from write_relocs and make global.
(elf_slurp_reloc_table): Make global.
(_bfd_elf,size_info): Use elf_write_relocs instead of write_relocs.
(bfd_ar_hdr_from_filesystem): Use it if HPUX_LARGE_AR_IDS is
defined and the ID is greater than 99999.
(bfd_generic_stat_arch_elt): If HPUX_LARGE_AR_IDS is defined decode
special uid/gid fields into 32 bit values.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
* dwarf2.c (struct dwarf2_debug): New field dwarf_line_size.
(decode_line_info): Set it. Report error if unit->line_offset is
equal to or larger than it.
opcodes:
* sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
(sh_arg_type): Add A_PC.
(sh_table): Update entries using immediates. Add repeat.
* sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
gas:
* config/tc-sh.c (immediate): Delete.
(sh_operand_info): Add immediate member.
(parse_reg): Use A_PC for pc.
(parse_exp): Add second argument 'op'. All callers changed.
(parse_at): Expect pc to be coded as A_PC.
Use immediate field in *op.
(insert): Add fourth argument 'op'. All callers changed.
(build_relax): Add second argument 'op'. All callers changed.
(insert_loop_bounds): New function.
(build_Mytes): Remove DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
(assemble_ppi): Use immediate field in *operand.
(sh_force_relocation): Handle BFD_RELOC_SH_LOOP_{START,END}.
(md_apply_fix): Likewise.
(tc_gen_reloc): Likewise. Check for a pcrel BFD_RELOC_SH_LABEL.
include/coff:
* sh.h (R_SH_LOOP_START, R_SH_LOOP_END): Define.
include/elf:
* sh.h (R_SH_LOOP_START, R_SH_LOOP_END): New RELOC_NUMBERs.
bfd:
* reloc.c (_bfd_relocate_contents): Add BFD_RELOC_SH_LOOP_START and
BFD_RELOC_SH_LOOP_END.
* elf32-sh.c (sh_elf_howto_tab): Change special_func to
sh_elf_ignore_reloc for all entries that sh_elf_reloc used to ignore.
Add entries for R_SH_LOOP_START and R_SH_LOOP_END.
(sh_elf_reloc_loop): New function.
(sh_elf_reloc): No need to test for always-to-be-ignored relocs
any more.
(sh_rel): Add entries for BFD_RELOC_SH_LOOP_{START,END}.
(sh_elf_relocate_section): Handle BFD_RELOC_SH_LOOP_{START,END}.
* bfd-in2.h, libbfd.h: Regenerate.
BFD_RELOC_16 to switch for extended relocs.
(MY_swap_ext_reloc_in): New.
(MY_swap_ext_reloc_out): New.
(NAME(aout,slurp_reloc_table)): Use MY_swap_ext_reloc_in rather
than NAME(aout,swap_ext_reloc_in) for extended relocs.
(NAME(aout,squirt_out_relocs)): Similarly use
MY_swap_ext_reloc_out.
(aout_link_reloc_link_order): Use MY_put_ext_reloc if defined.
HOWTO references to bfd_elf_generic_reloc, that have
partial_inplace == true, now use the new function. The function
is based on the recent rewrite of m32r_elf_lo16_reloc(), and
extends its fixes to the R_M32R_{16,24,32} relocs.
The new logic in m32r_elf_lo16_reloc() has been removed, and
it instead calls the new routine to obtain that functionality.
complain_overflow_bitfield doesn't complain) from -2**(n-1)..2**n-1 to
-2**n..2**n. This might mean that some reloc overflows are no longer
caught, but it solves the address wrap problem for 16-bit relocs
nicely. In any case, ports that rely on complain_overflow_bitfield
for reloc overflow checking were not getting a very good check
previously. A bitfield range in a machine instruction is typically
either the signed or unsigned n bit numbers, not the overlap of these
two ranges.
* elf32-mips.c (mips_elf_next_relocation): Rename from
mips_elf_next_lo16_relocation, and generalize to look
for any relocation type.
(elf_mips_howto_table): Make R_MIPS_PC16 pcrel_offset.
(elf_mips_gnu_rel_hi16): Howto for R_MIPS_GNU_REL_HI16.
(elf_mips_gnu_rel_lo16): Howto for R_MIPS_GNU_REL_LO16.
(elf_mips_gnu_rel16_s2): Howto for R_MIPS_GNU_REL16_S2.
(elf_mips_gnu_pcrel64): Howto for R_MIPS_PC64.
(elf_mips_gnu_pcrel32): Howto for R_MIPS_PC32.
(bfd_elf32_bfd_reloc_type_lookup): Add new relocs.
(mips_rtype_to_howto): Likewise.
(mips_elf_calculate_relocation): Handle new relocs.
(_bfd_mips_elf_relocate_section): REL_HI16/REL_LO16 relocs
are paired. The addend for R_MIPS_GNU_REL16_S2
is shifted right two bits.
In gas/:
* config/tc-mips.c (mips_ip): Don't put stuff in .rodata
when embedded-pic.
* config/tc-mips.c (SWITCH_TABLE): The ELF embedded-pic
implementation doesn't have special handling for switch
statements.
(macro_build): Allow for code in sections other than .text.
(macro): Likewise.
(mips_ip): Likewise.
(md_apply_fix): Do pc-relative relocation madness for MIPS ELF.
Don't perform relocs if we will be outputting them.
(tc_gen_reloc): For ELF, just use fx_addnumber for pc-relative
relocations. Allow BFD_RELOC_16_PCREL_S2 relocs when
embedded-pic.
In gas/testsuite/:
* gas/mips/empic.d: New file.
* gas/mips/empic.s: New file.
* gas/mips/mips16-e.d: New file.
* gas/mips/mips16-e.s: New file.
* gas/mips/mips16-f.d: New file.
* gas/mips/mips16-f.s: New file.
* gas/mips/mips.exp: Add empic, mips16-e. Add mips16-f as an
expected failure.
In include/elf:
* mips.h: Add R_MIPS_GNU_REL_HI16, R_MIPS_GNU_REL_LO16,
R_MIPS_GNU_REL16_S2, R_MIPS_PC64 and R_MIPS_PC32 relocation
numbers.