embedded PIC code, accept the difference between two local symbols
as being constant.
(mips_force_relocation): Only force a reloc to be generated for a
PC relative fixup.
(md_apply_fix): For BFD_RELOC_32 and BFD_RELOC_LO16, put the fixup
value into the file if the fixup will not generate a reloc.
flag rather than signedp field. Only permit extended range if
PPC_OPERAND_SIGNOPT flag is set and assembling in 32 bit mode.
Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
(ppc_arch): Check for PPC_OPCODE_PPC before PPC_OPCODE_POWER.
(md_begin): If an instruction has a size specific flag set, only
add it if we are assembling that size.
branch with an instruction that uses $at, in case the branch is
later expanded.
(macro): If EMBEDDED_PIC, case M_JAL_A may use $at.
(md_pcrel_from): If not OBJ_AOUT, return 4 for an undefined symbol
to make it pcrel_offset.
(tc_gen_reloc): If not OBJ_AOUT, set the reloc addend to
reloc->address; another gruesome hack to get gas reloc handling to
do the right thing.
(T12): New macro.
(emit_insn): New function.
(md_assemble): Call it.
(alpha_force_relocation): Handle BFD_RELOC_26, for call_pal instructions.
(lituse_pending): New variable. Set by anything that generates a LITERAL
reloc, cleared by anything that generates a LITUSE reloc, tested by code that
might want to emit a LITUSE reloc.
(emit_unaligned_io): New function. Currently calls md_assemble, but it should
eventually be converted to generate the insn itself and call emit_insn directly.
(emit_load_unal, emit_store_unal, emit_byte_manip_r, emit_extract_r,
emit_insert_r, emit_mask_r, emit_sign_extend, emit_bis_r): Likewise.
(alpha_ip, case 'I'): Handle with BFD_RELOC_23.
(alpha_ip, label get_macro): Don't emit the final instruction if the opcode is
zero.
(alpha_ip, case 'B', subcase 'd'): New case, for subword and unaligned memory
access macros.
(md_apply_fix): Handle BFD_RELOC_26. Generate an error message if the value
can't be resolved.
(mips_pic): Change from int to enum mips_pic_level. Change all
uses (0 becomes NO_PIC, 2 becomes SVR4_PIC).
(load_address): Handle EMBEDDED_PIC.
(macro): Handle EMBEDDED_PIC in all PIC cases.
(md_parse_option): Accept -membedded-pic to use EMBEDDED_PIC. If
OBJ_ELF, accept -KPIC and -call_shared to use SVR4_PIC and accept
-non_shared to use NO_PIC (this is how the Irix 5 assembler
works). Do not permit -G with SVR4_PIC.
(s_abicalls): Warn if -G was used, and force -G 0.
(tc_gen_reloc): Set reloc->addend to 0 for a PC relative reloc for
anything but a.out, not just for ELF. For ECOFF, don't generate a
BFD_RELOC_16_PCREL_S2 reloc unless using EMBEDDED_PIC.
is called.
(dump_section_relocs): Note whether a symbol is a section symbol or not.
(adjust_reloc_syms): For now, always supply an absolute symbol for fixups
without symbols but not yet `done'. Use section_symbol to get the symbol,
instead of going directly for abs_symbol.
(write_relocs) [DEBUG4]: Abort if any symbol referred to by a reloc is not a
section symbol and is not in the symbol table.
(set_symtab): New function, broken out from write_object_file. Counts symbol
table instead of relying on an earlier count.
(write_object_file): Call set_symtab, but do it after potentially invoking the
*_frob_file macros. Don't bother counting symbols. Call symbol_remove,
instead of expanding it in place. Moved the conditionalized `object_file_size'
declaration down to conditionalized block where it's used. When using the
absolute symbol for a fixup without a symbol, set sy_used_in_reloc.
(write_object_file) [BFD_ASSEMBLER]: Call section_symbol to get the correct
symbol for the absolute section.
BFD_ASSEMBLER; I think all such targets that are supported will be matched by
real CPU-OS combinations earlier in the case statement.
(targets *-*-coff*, *-sysv*, *-*-sco*, *-*-sysv32): Deleted. Made some
comments about the dpx2 configuration, but left it disabled, since it couldn't
be reached before.
(target a29k-amd-ebmonold): Deleted.
* configure.in: If cpu is powerpc*, use ppc.
(ppc-*-sysv4*): Use object format elf.
* config/tc-ppc.h: Only declare a number of things if OBJ_COFF is
defined.
(TARGET_ARCH): Make it call ppc_arch.
(ppc_arch): Declare.
(TARGET_FORMAT): Set based on OBJ_COFF or OBJ_ELF.
(NO_STRING_ESCAPES): Define.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define for OBJ_ELF.
* config/tc-ppc.c: Only define a number of functions of OBJ_COFF
is defined.
(md_pseudo_table): Most pseudo-ops are OBJ_COFF specific. Added
OBJ_COFF specific "bi" and "ei".
(md_parse_option): Fix handling of -u. Make -m601 set
PPC_OPCODE_601. If OBJ_ELF, accept -V and -Q.
(ppc_set_cpu): New function.
(ppc_arch): New function.
(md_begin): Call ppc_set_cpu.
(ppc_insert_operand): For a signed operand accept an unsigned
value, for IBM compatibility.
(ppc_byte): Don't call stringer for strings; instead, treat two
double quotes as a single double quote.
(ppc_comm): Set sy_tc.output for a .lcomm symbol.
(ppc_biei): New function.
(ppc_tc): If not OBJ_COFF, ignore first argument.
(ppc_fix_adjustable): Call as_bad_where, not as_bad.
(ppc_is_toc_sym): New function.
(md_apply_fix): Use ppc_is_toc_sym. Handle BFD_RELOC_16 and
BFD_RELOC_8.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Use memset
instead of memcpy to zero the initial stab symbol, duh.
* config/obj-elf.c (obj_elf_init_stab_section): Ditto.
* config/obj-som.c (obj_som_init_stab_section): Ditto.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Zero the
initial stab symbol after allocating it.
* config/obj-elf.c (obj_elf_init_stab_section): Ditto.
This fixes a critical bug observed in Q4 for Lynx.
ecoff_undefined.
(ecoff_frob_symbol): Don't check ecoff_undefined.
(ecoff_build_symbols): Get size of an undefined symbol from
sym->ecoff_extern_size, not S_GET_VALUE (sym).
declare if BFD_ASSEMBLER.
(stack_pop): Correct test for stack underflow.
(obj_coff_endef, obj_coff_dim, obj_coff_line, obj_coff_size,
obj_coff_scl, obj_coff_tag, obj_coff_type, obj_coff_val): Declare
type of ignored argument to avoid gcc warning.
(align): Removed unused function.
