Make the little-endian emulation the default for the `mips*el-mti-elf*'
and `mips*el-img-elf*' targets, fixing the issue of LD rejecting, in its
default configuration, object files produced by GAS also in its default
configuration.
ld/
* configure.tgt <mips*el-mti-elf*, mips*el-img-elf*>: Add
targets.
ld * Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
CloudABI on aarch64. For this target we have to make sure we use
ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
* configure.tgt (targ_emul): Likewise.
* emulparams/aarch64cloudabi.sh: New file.
* emulparams/aarch64cloudabib.sh: New file.
* Makefile.in: Regenerate.
bfd * config.bfd (targ_defvec): Add support for CloudABI on aarch64.
For this target we have to make sure we use ELFOSABI_CLOUDABI
instead of ELFOSABI_NONE.
* configure.ac (tb): Likewise.
* elfnn-aarch64.c: Likewise.
* targets.c (_bfd_target_vector): Likewise.
* configure: Regenerate.
gas * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
This patch sets the default ELF output format of assembler and linker to
EM_IAMCU when binutils is configured to i?86-*-elfiamcu target.
gas/
* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
* config/tc-i386.c (i386_mach): Support iamcu.
(i386_target_format): Likewise.
ld/
* configure.tgt: Support i[3-7]86-*-elfiamcu target.
ld/testsuite/
* ld-i386/i386.exp (iamcu_tests): Run iamcu-4.
* ld-i386/iamcu-4.d: New file.
At the moment it is possible to configure binutils for these triples
but the resulting linker defaults to little endian with huge numbers
of testsuite failures, which on the face of it does not appear to make
much sense.
This patch makes the behaviour similar to armeb-elf and the testsuite
is clean.
bfd/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* config.bfd: Default armeb-*-eabi* to big endian.
ld/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* configure.tgt: Default armeb-*-eabi* to big endian.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
The manifest is necessary in order for the linked binaries to be executed in a Windows 8 environment.
The manifest is added using a linker script so that this feature will be compiler-neutral. The resource
merging code in the linker means that if an application provides its own manifest then the default
manifest will be ignored.
* configure.in (all_emul_extra_binaries): New variable. Populated
by invoking configure.tgt.
(EMUL_EXTRA_BINARIES): New substitution.
* configure: Regenerate.
* configure.tgt (target_extra_binaries): New variable. Set to
default-manifest.o for Cygwin and MinGW targets.
* Makefile.am (EMUL_EXTRA_BINARIES): New variable. Initialised
by the configure script.
(ALL_EMUL_EXTRA_BINARIES): New variable.
(default-manifest.o): New rule to build the default manifest.
(ld_new_DEPENDENCIES): Add EMUL_EXTRA_BINARIES.
(install-data-local): Add EMUL_EXTRA_BINARIES.
* Makefile.in: Regenerate.
* ld.texinfo: Document default manifest support.
* emulparams/i386pe.sh (DEFAULT_MANIFEST): Define.
* emulparams/i386pep.sh (DEFAULT_MANIFEST): Define.
* emultempl/default-manifest.rc: New file.
* scripttempl/pe.sc (R_RSRC): Include DEFAULT_MANIFEST, if defined.
* scripttempl/pep.sc (R_RSRC): Likewise.
* ld-pe/longsecn-1.d: Allow for extra sections.
* ld-pe/longsecn-2.d: Likewise.
* ld-pe/longsecn.d: Likewise.
* ld-pe/secrel.d: Likewise.
Since all MCUs now have their own specific linker script (courtesy of
TI) there is no need for these emulations and so this patch removes
them.
* Makefile.am: Remove obsolete MSP430 emulations.
* configure.tgt: Likewise.
* emulparams/msp430all.sh: Likewise.
* Makefile.in: Regenerate.
and gas.
bfd/
* Makefile.am (BFD64_BACKENDS): Add elf32-aarch64.lo.
(BUILD_CFILES): Add elf32-aarch64.c.
(elf32-aarch64.c): New rule for generating from elfnn-aarch64.c.
* Makefile.in: Re-generated.
* archures.c (bfd_mach_aarch64_ilp32): New define.
* bfd-in.h (bfd_elf32_aarch64_init_maps): New declaration.
(bfd_elf32_aarch64_set_options): Ditto.
(elf32_aarch64_setup_section_lists): Ditto.
(elf32_aarch64_next_input_section): Ditto.
(elf32_aarch64_size_stubs): Ditto.
(elf32_aarch64_build_stubs): Ditto.
* bfd-in2.h: Re-generated.
* config.bfd (aarch64-*-elf): Add bfd_elf32_littleaarch64_vec
and bfd_elf32_bigaarch64_vec.
(aarch64-*-linux*): Likewise.
(aarch64_be-*-elf): Likewise.
(aarch64_be-*-linux*): Likewise.
* configure.in (bfd_elf32_bigaarch64_vec)
(bfd_elf32_littleaarch64_vec): New.
* configure: Re-generated.
* cpu-aarch64.c (compatible): Don't allow mixing ilp32 objects with
lp64 ones.
(bfd_aarch64_arch_ilp32): New.
(bfd_aarch64_arch): Link to bfd_aarch64_arch_ilp32.
* elfnn-aarch64.c (ARCH_SIZE): New define.
(AARCH64_R, AARCH64_R_STR, LOG_FILE_ALIGN): New defines.
(GOT_ENTRY_SIZE): Re-define as (ARCH_SIZE / 8).
(elf64_aarch64_*): Rename to elfNN_aarch64_*.
(ELF64_R_*): Rename to ELFNN_R_*.
Plus other paramaterization.
* targets.c (bfd_elf32_bigaarch64_vec, bfd_elf32_littleaarch64_vec):
New declarations.
(_bfd_target_vector): Add bfd_elf32_bigaarch64_vec and
bfd_elf32_littleaarch64_vec.
gas/
* config/tc-aarch64.c (ilp32_p): New static variable.
(elf64_aarch64_target_format): Return the target according to the
value of 'ilp32_p'.
(md_begin): Determine 'mach' according to the value of 'ilp32_p'.
(aarch64_opts): Add support for options '-milp32' and '-mlp64'.
(aarch64_dwarf2_addr_size): New function.
* config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
(DWARF2_ADDR_SIZE): New define.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eaarch64elf32.c.
(eaarch64elf32.c): New dependency and rule.
* Makefile.in: Re-generated.
* configure.tgt (aarch64-*-elf): Add aarch64elf32.
(aarch64_be-*-elf, aarch64_be-*-linux*, aarch64-*-linux*): Likewise.
* emulparams/aarch64elf32.sh: New file.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
* configure.tgt: Add x86_64-*-cygwin* as valid target.
* emultempl/pep.em: Handle different requirements for Cygwin in terms
of start addresses for executables and DLLs, based on memory model in
http://cygwin.com/ml/cygwin-developers/2013-02/msg00027.html
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
