Commit graph

14 commits

Author SHA1 Message Date
Peter Schauer
ad09cb2bd3 * findvar.c (value_of_register, value_from_register),
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
	valops.c (value_assign):   Use REGISTER_CONVERT_TO_* only if
	REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
	Pass desired type to REGISTER_CONVERT_TO_*.

	* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
	Pass length of desired type to store/extract_floating.
	* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
	config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
	config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
	Use extract_floating and store_floating with length of desired type.
	* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE):  Add type
	parameter to REGISTER_CONVERT_*.

	* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
	config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
	config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
	config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
	config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
	config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
	config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL):  Remove
	versions for which REGISTER_CONVERTIBLE is always false.
	* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
	Remove, no longer used.

	* alpha-tdep.c (alpha_register_convert_to_raw,
	alpha_register_convert_to_virtual):  New routines to handle
	the different raw formats in alpha floating point registers.
	* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Use them.
1993-11-02 21:51:10 +00:00
Thomas Lord
199b2450f6 Change the stream argument to _filtered to GDB_FILE *.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.

Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')

Replaced calls to fopen for output to gdb_fopen.

Added sufficient goo to utils.c and defs.h to make the above work.

The net effect is that stdio output functions are only directly used
in utils.c.  Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.

In the near future, GDB_FILE will stop being equivalant to FILE.

The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior.  The testsuite doesn't notice anything
like this, though.

Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code.  All output from commands
should go to a GDB_FILE.

Target-specific code can still use stdio directly to communicate with
targets.
1993-11-01 22:25:23 +00:00
Jim Kingdon
976bb0be03 * Makefile.in (init.c): Generate using the source, not munch. This
cleans up all kinds of hassles (which nm to use in munch, etc).  The
	new formatting conventions (mostly already followed) are that
	the name of the _initialize_* routines must start in column zero,
	and must not be inside #if.
	* munch: Removed.
	* Makefile.in: Remove references to munch.
	* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
	alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
	procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
	i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
	z8k-tdep.c: Make sure the above conventions are followed.  Make
	sure they are all declared as returning void.  Clean up
	miscellaneous comments and such.
1993-10-22 05:55:58 +00:00
Jim Kingdon
114221b5a4 * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments
about SHIFT_INST_REGS.

	* exec.c (exec_file_command): Set text_end based on all code readonly
	sections, not just ".text".

	* defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
	config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
	z8k-tdep.c: Remove all references to ADDR_BITS_SET.
	* config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.

	* config/m88k/tm-m88k.h: Add definitions for calling functions.
1993-09-23 17:16:35 +00:00
K. Richard Pixley
4ed97c9a83 bzero -> memset 1993-09-01 21:56:42 +00:00
Jim Kingdon
34df79fc9d * findvar.c, defs.h
({extract,store}_{signed_integer,unsigned_integer,address}):
	New routines to replace SWAP_TARGET_AND_HOST.
	All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
1993-07-10 01:35:53 +00:00
Ken Raeburn
337fd0067c print_insn_* routines want bfd_vma, not CORE_ADDR 1993-05-25 20:12:59 +00:00
Jim Kingdon
5d0734a7d7 provide a new interface (using read_memory_func) to call the disassemblers
which copes with errors in a plausible way
1993-03-31 21:43:25 +00:00
Steve Chamberlain
52f8e6a0ab (print_insn): Include the new dis-asm header file. 1993-03-19 15:41:31 +00:00
Per Bothner
00cea52f92 * ieee-float.c: Moved to ../libiberty.
* ieee-float.h: Moved to ../include.
	* Makefile.in:  Update accordingly.
	* i386-pinsn.c (print_insn), m68k-pinsn.c (print_insn):
	Convert to stubs that call disassemblers in ../opcodes/*-dis.c.
	* m68k-tdep.c:  Removed definition of ext_format ext_format_68881;
	it is now in ../opcodes/m68881-ext.c.
	* mips-tdep.c (mips_skip_prologue):  Try to skip more of the
	prologue (some callers _do_ care).
	* mips-pinsn.c (print_insn), z8k-tdep.c (print_insn):  Convert to
	new interface of ../opcodes/*-dis.c.
	* ch-exp.y:  Add #include <ctype.h>.
1993-03-19 00:18:55 +00:00
Steve Chamberlain
2d8d693ab7 New functions from macros in tm-z8k.h. 1993-03-17 19:32:42 +00:00
Steve Chamberlain
b2ff9b68b2 (print_register_hook): Lint. 1993-03-05 15:52:23 +00:00
Steve Chamberlain
e4ebb8e5e6 Some spit and polish 1993-02-05 18:07:09 +00:00
Steve Chamberlain
a332e59322 * remote-z8k.c, z8k-tdep.c: support for the Z8001 and Z8002.
* parse.c (std_regs): Only declare if NO_STD_REGS is defined.
1993-02-01 22:53:24 +00:00