section in an ELF file, override a symbol's ECOFF section with its
ELF section. Also, fix stabs continuation where a stabs string
continues for more than one continuation.
Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
* sol-thread.c (sol_thread_store_registers): Save & restore new
value of single updated register to prevent accidental clobbering.
* ns32k-tdep.c (flip_bytes, ns32k_localcount,
ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
deleted.
* ns32knbsd-nat.c: New (?) file to support fetching and storing
registers on NetBSD hosts.
* nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
ns32k-nat.o
* ns32km3-nat.c (reg_offset): Get order of floating point
registers correct. Add extra 32382 register offsets.
(REG_ADDRESS): define to point at correct part of thread
state. Use calls to "warning" instead of "message".
* tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
fpu registers.
* rdi-share/Makefile.am, rdi-share/aclocal.m4,
rdi-share/configure: New files.
* rdi-share/configure.in: Rewritten to be an autoconf input file.
* rdi-share/Makefile.in, rdi-share/configure: Generated by
automake/autoconf.
* rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
to check environment.
automake/autoconfiscate rdi-share. We don't use the checks that autoconf
provides too much for now, but it'll be easier to use them if any problems
crop up in the future. (rdi-share/ is foreign code and it probably isn't
worth spending any more time than necessary messing with it.)
* gdbtk.c: (gdb_trace_status) new function.
(gdbtk_init) added command "gdb_is_tracing".
(tracepoint_notify) added passcount information.
* tracepoint.c (trace_status_command): Recognize a boolean return
value from the stub to indicate whether trace experiment is
running. Export this value as a global state variable
(trace_running_p) for use by the GUI. (from Michael Snyder)
(trace_pass_command) added call to modify_tracepoint_hook.
* tracepoint.h export trace_running_p
* gdbtk.c (gdbtk_fputs): Insert fencepost.
(gdb_loc): Correct pc calculation.
(gdb_immediate_command): Return if a load is in progress.
(gdb_cmd): Return if a load is in progress.
(target_stop_wrapper): New function.
(gdb_stop): Call target_stop_wrapper.
(x_event): Add fencepost and optimize load cancel check.
(gdbtk_start_timer): Set up structs only once.
(gdbtk_stop_timer): Just use preset structs to set timer parameters.
(gdb_loadfile): If file cannot be loaded, return error message.
(gdb_loadfile): Add space before tab so that lines without
a '-' can later be changed to have one.
* config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
from SIM. This prevents dependency checking of -lm (under NT
native builds). (It is automatically added by configure if it
exists.)
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
Regenerate with autoconf 2.12.1 to fix shell issues for NT native
builds.
* breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
like bp_breakpoints.
* solib.c (solib_create_inferior_hook): Relocate section addresses
if the alleged start address doesn't agree with the PC.
merged changes from Foundry (list follows by file/author):
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* ser-unix.c
- Keith Seitz <keiths@onions.cygnus.com>
(wait_for): Don't reset the timeout_remaining for CYGWIN32,
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
(hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
second, update the UI, and loop around doing this until we have hit the real
timeout or we get data or an error. This will allow the UI to stay active
while gdb is "blocked" talking to the target.
- Martin M. Hunt <hunt@cygnus.com>
(wait_for): Do reset current_timeout
because it is only used to keep track of what the
current timeout for the scb is.
* top.c
- Martin M. Hunt <hunt@cygnus.com>
(quit_confirm): Change exit message again
for GUI.
(pc_changed_hook): Add prototype.
- Tom Tromey <tromey@cygnus.com>
(quit_confirm): Added missing `else'.
(quit_confirm): Special-case message if init_ui_hook is
set.
* symtab.c
- Martin M. Hunt <hunt@cygnus.com>
(find_pc_sect_line): If no symbol information
is found, return correct pc anyway.
(find_methods): Comment out an apparently
bogus error message because it messes up Foundry.
* serial.c
- Martin M. Hunt <hunt@cygnus.com>
(_initialize_serial): Add a description of
"set remotelogbase".
* findvar.c
- Martin M. Hunt <hunt@cygnus.com>
(write_register_gen): Add call to
pc_changed_hook if the PC is being changed.
* defs.h
- Martin M. Hunt <hunt@cygnus.com>
(pc_changed_hook): Define.
* command.c
- Martin M. Hunt <hunt@cygnus.com>
(do_setshow_command): If no arguments are supplied,
don't dump core, instead print out an error message.
* breakpoint.c
- Martin M. Hunt <hunt@cygnus.com>
Make set_raw_breakpoint, set_breakpoint_count,
and breakpoint_count non-static so they are accessible from
gdbtk.c.
(enable_breakpoint): Enable breakpoint
with same disposition instead of changing all breakpoints
to donttouch.
* annotate.h
- Keith Seitz <keiths@onions.cygnus.com>
Add declarations for annotation hooks.
* annotate.c
- Keith Seitz <keiths@onions.cygnus.com>
Add hooks: annotate_starting_hook, annotate_stopped_hook,
annotate_signalled_hook, annotate_exited_hook.
(annotate_starting): If hook exists, call it instead.
(annotate_stopped): If hook exists, call it instead.
(annotate_exited): If hook exists, call it instead.
(annotate_signalled): If hook exists, call it instead.
Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
Merged changes from Foundry: list follows by author:
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
(gdbtk_cleanup): Call ide_interface_deregister_all.
(gdbtk_init): Pass event handle to cleanup.
(TclDebug): Use Tcl_Merge to construct command.
(gdbtk_init): Call ide_create_cygwin_path_command.
- Martin M. Hunt <hunt@cygnus.com>
* gdbtk.c (gdb_set_bp): Set addr_string for bp.
(gdb_get_breakpoint_info): Demangle function
names in breakpoint info.
Include "demangle.h".
(gdb_loc, gdb_listfuncs): Demangle C++
function names.
(gdb_set_bp): Properly quote filename to fix
problems with spaces. Send pc back as a hex string.
(gdb_listfuncs): Remove debugging line.
Turn off some debugging lines.
(breakpoint_notify): Return correct line number.
(gdb_get_breakpoint_info): Return correct line number.
(gdb_set_bp): New function to provide a better way to
set breakpoints.
(gdbtk_readline, gdbtk_readline_begin): Memory
allocated by tcl needs to be freed by Tcl_Free().
(find_file_in_dir): Deleted.
(gdb_find_file_command): Call full_lookup_symtab().
(gdb_listfuncs): Call full_lookup_symtab().
(full_lookup_symtab): New function. Like lookup_symtab
except handles multiple files with the same basename,
full pathnames, and always sets symtab->fullname.
(gdb_loadfile): Call full_lookup_symtab(). Clear
realloc'd memory.
(gdb_loadfile): Don't tag lines without source.
Tag source lines with source_tag.
(gdb_find_file_command, find_file_in_dir):
Rewrite. Now searches symtabs and psymtabs for a match
on the partial or full filename. Returns the full pathname.
(gdb_loadfile): Realloc additional memory
if someone loads in a file with more than 160,000
lines. I don't know if this really works because
I don't have enough memory to test it.
(gdb_sourcelines): Deleted.
(gdb_loadfile): New function. Takes a text widget
and loads it with the contents of a file. Marks
and tags source lines.
(pc_changed): New function.
(get_pc_register): Returns the value of
the PC to GDB.
(gdb_loc): If looking on the stack, return
real pc along with calling source line.
(gdb_loc): Return "" instead of "N/A" if
filename is not found.
(gdb_get_breakpoint_info): Same.
(get_register): For Natural mode, set format to 0.
Minor bugfixes from keiths.
(TclDebug): New function for debugging use.
(gdb_loc): Return correct PC for frames
that are not the innermost frame.
(gdb_listfiles): Rewritten to use object
API. Now takes an optional dirname which will cause
only files in that directory or its subdirectories
to be returned. Now returns basenames instead of
full pathnames.
(gdb_cmd): Set/reset load_in_progress flag.
(call_wrapper): Don't pop up dialog for errors in
downloads; just abort download.
(gdbtk_load_hash): Set return value correctly.
- Keith Seitz <keiths@onions.cygnus.com>
* gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
called by routines which might block, allowing us to update the GUI.
(gdbtk_wait): Move timer calls to annotation hooks.
(gdbtk_init): Define the annotation hooks.
(gdbtk_annotate_starting): New function for cygwin32 hosts.
(gdbtk_annotate_stopped): New function for cygwin32 hosts.
(gdbtk_annotate_exited): New function for cygwin32 hosts.
(gdbtk_annotate_signalled): New function. for cygwin32 hosts.
(gdbtk_init): Use gdbtk_print_frame_info hook.
(gdbtk_print_frame_info): New function which sets current_source_symtab
based on the given symtab and line info.
(gdb_immediate_command): New function which does
not buffer any
output. (Contrast to gdb_cmd.)
(gdb_prompt_command): New function to return gdb's prompt.
(find_file_in_dir): New functon which searches source paths
for a given filename.
(gdb_find_file): New function which returns path to given file -- uses
find_file_in_dir.
(gdbtk_init): Install "gdb_immediate", "gdb_find_file", and
"gdb_prompt"
commands into interpreter.
- Ian Lance Taylor <ian@cygnus.com>
* gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
variable.
(gdb_cmd): If __CYGWIN32__, if executing the load command, call
gdbtk_start_timer and gdbtk_stop_timer.
(call_wrapper): If __CYGWIN32__, if the timer is going, turn it
off. Clear load_in_progress.
(x_event): If load_in_progress, quit if download_cancel_ok.
(gdbtk_start_timer): Set gdbtk_timer_going.
(gdbtk_stop_timer): Clear gdbtk_timer_going.
(gdbtk_wait): Call x_event.
(gdbtk_init): Call ide_create_win_grab_command if
__CYGIN32__.
(gdb_clear_file): Clear stop_pc.
* gdbserver/Makefile.in: add dependency on XM_CLIBS.
* gdbserver/low-sim.c (registers) force into alignment.
(create_inferior): Fix typo on new_argv; add abfd arg to
sim_open, sim_create_inferior. Add reg_size arg to
sim_fetch_register, sim_store_register. Make simulator
take a single-step to get into a known running state.
* gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
* gdbserver/server.c: Add remote_debug variable to control
debug output.
* gdbserver/server.h: Add prototypes for enable/disable_async_io.
* gdbserver/remote-utils.c: add verbose debugging output controlled
by "remote_debug" variable. Add call to "disable_async_io()"
to avoid being killed by async SIGIO signals.
* config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
so that gdbserver can be built with the m32r simulator.
unsigned types.
Specify size of r5900 FSR using 32 bit unsigned type.
Correctly format mips registers when some are not 64 bits in size
Check that REGISTER_{RAW,VIRTUAL}_SIZE are consistent when the target
specifies that no conversion is needed when moving from one to the
other.
* minsyms.c (compare_minimal_symbols): If addresses are identical,
then compare on names. Sorted list should have symbols with
identical addresses AND names adjacent, so dups can be discarded.
* config/m68k/xm-sun3os4.h: Remove malloc declarations, they
are handled via autoconf now.
* remote.c (remote_ops, extended_remote_ops): Replace static
forward declaration by moving the static definition to the top of
the file, for old K&R compilers.
* tracepoint.c (collect_symbol, trace_start_command):
Replace ANSI string concatenation with K&R compatible simple string.
* utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
SERIAL_FLUSH_OUTPUT.
* serial.h (struct serial_ops): Add drain_output, pointer to
function that waits for output to drain.
(SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
* ser-unix.c (hardwire_drain_output): New function and prototype.
* ser-unix.c (hardwire_ops): Add entry for drain_output function.
* ser-tcp.c (tcp_ops): Ditto.
* ser-ocd.c (ocd_ops): Ditto.
* ser-mac.c (mac_ops): Ditto.
* ser-go32.c (dos_ops): Ditto.
* ser-e7kpc.c (e7000pc_ops): Ditto.
* serial.c (_initialize_serial): Add a description of
"set remotelogbase".
* command.c (do_setshow_command): If no arguments are supplied,
don't dump core, instead print out an error message.
Configuration triple mips64vr4111-*-elf
64 bit architecture
16 bit sub core
32 bit ints and floats
No floating point unit
MIPS EABI interface
Dwarf2 debugging format
* alpha-nat.c (fetch_osf_core_registers): Renamed from
fetch_aout_core_registers.
(alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change
flavour to bfd_target_unknown_flavour for OSF core files.
* Makefile.in (BISON): Don't even pretend to use yacc.
(c-exp.tab.o): Use bison -o to use a unique intermediate file.
(jv-exp.tab.o, f-exp.tab.o, m2-exp.tab.o): Likewise.
* acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
* configure.in: Ditto.
* configure: Regenerated.
Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* gdbtypes.c (check_typedef): Do not try to resolve the length of
a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
set TYPE_FLAG_TARGET_STUB as well.
Patches from Peter.
so that targets can define their own register name aliases.
infcmd.c (registers_info): call target_map_name_to_register so that
"print $reg" and "info reg $reg" share the same register alias set.
mips-tdep.c: separate MIPS_R5900_REGS from NUM_REGS so that sky registers
can be printed separately.
txvu-tdep.c: print registers according to current CPU context.
tm-txvu.h: define SKY registers and conditionalize register interpretation
macros.
txvu.mt: Don't bother building remote-mips.o for sky target.
