config/i386/nm-linux.h (including comment).
(i386_linux_frame_chain): New function implementing guts of the
former FRAME_CHAIN macro, but using read_memory_unsigned_integer
instead of read_memory_integer.
(i386_linux_frame_saved_pc): Removed doc pointing to
i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
now lives in this file.
* config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
i386-linux-tdep.c (including comment).
(FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
(i386_linux_frame_chain): New prototype.
make it work again.
(NUM_FREGS): Redefine to 0.
(NUM_REGS): Redefine as NUM_GREGS.
(i386_register_byte, i386_register_raw_size): Update from
i386-tdep.c. Add comment about their origin.
(regmap, register_u_addr): Take these from i386-linux-nat.c.
(i386_register_u_addr): Removed.
i386_linux_sigtramp_saved_sp): Make static.
(i386_linux_frame_saved_pc): New function based on the old
FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
of read_memory_integer.
* config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
(i386_linux_sigtramp_saved_pc): Remove prototype.
(FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
(i386_linux_frame_saved_pc): New prototype.
functions.
* config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
(STORE_STRUCT_RETURN): Redefine in terms of
i386_store_struct_return.
(i386_push_arguments, i386_store_struct_return): New prototypes.
* config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
definition was identical to the definition in "i386/tm-i386.h" so
the new definition should suffice too.
* ser-go32.c (rawclock): Remove prototype; include time.h instead.
(ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
(top level) <string.h>: Include gdb_string.h instead.
(dos_noop, dos_raw, dos_noflush_set_tty_state)
(dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
* go32-nat.c (go32_create_inferior): Move the declaration of
`environ' to here from the top level.
(top level) <_initialize_go32_nat>: Remove redundant prototype.
<gdb_string.h>: Include it instead of string.h.
(store_register): Call register_buffer instead of accessing
registers[] directly.
(redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
(redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
the function names at the start of the line.
(go32_set_dr): Throw internal_error if the argument is not a valid
debug register number.
(go32_open, go32_close, go32_attach, go32_detach, go32_resume)
(go32_wait, go32_xfer_memory, go32_files_info)
(go32_terminal_info): Remove ATTRIBUTE_UNUSED.
From Andrew Cagney <ac131313@redhat.com>
* coffread.c: Include "gdb_assert.h".
(coff_symtab_read): Cast the integer s_sclass to a long before
casting it to a pointer.
From Andrew Cagney <ac131313@redhat.com>
* coffread.c (coff_symtab_read): Initialize
``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
the ``.ef'' info.
* dbxread.c (find_text_range): Initialize ``start'' and ``end''.
xmrealloc): Move existing declarations to the one place and
re-order to be consistent.
(xmcalloc, xmfree): Declare.
(xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
declaration.
* utils.c (size_t): Delete #ifdef defining size_t.
(mmalloc, mrealloc, mcalloc, mfree): Re-order.
(mmalloc, mrealloc, mcalloc): Document as only calls in GDB
corresponding malloc, realloc, calloc.
(mfree): Call free directly.
(xmmalloc, xmrealloc): Clean up. Assume ISO-C.
(xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
function bodies to here.
(xcalloc, xfree): Call xmcalloc and xmfree respectfully.
and watchpoints on x86 targets.
* i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
[HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
(DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
appropriate value if not already defined.
(register_u_addr): New function.
(kernel_u_size): New function.
(i386_linux_dr_get, i386_linux_dr_set): New functions.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
* config/i386/nm-linux.h: Don't include "nm-i386v.h".
(I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
(TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
target_remove_watchpoint): Remove macros.
(i386_stopped_by_watchpoint, i386_insert_watchpoint,
i386_remove_watchpoint): Remove prototypes.
(register_u_addr): New prototype.
(REGISTER_U_ADDR): Define in terms of register_u_addr.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
(I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
* config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
i386-nat.o.
significant in *un*mangled method names. Use strcmp_iw to compare
them, not STREQ. (Fix from Daniel Berlin.)
* gdb/testsuite/gdb.c++/userdef.exp: Check that GDB tolerates whitespace in
unmangled operator names.
already defined.
From 2000-08-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>:
* stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
or a reference ('a') can be in a pseudo register.
* infcmd.c (do_registers_info): Must take into account the pseudo
registers to print their value.
(registers_info): Likewise.
* stack.c (frame_info): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
bfd_get_section_name.
(compare_sections_command): Ditto.
(remote_cisco_section_offsets): Make ``p'' a const pointer.
(compare_sections_command): Ditto for ``sectname''.
h8300_frame_args_address from frame_args_address.
(FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
from frame_locals_address.
(PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
from print_register_hook.
(h8300_frame_args_address): Declare.
(h8300_frame_find_saved_regs): Declare.
(h8300_frame_locals_address): Declare.
(h8300_frame_saved_pc): Declare.
(h8300_pop_frame): Declare.
(h8300_print_register_hook): Declare.
* h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
(h8300_frame_args_address): Renamed from frame_args_address.
(h8300_frame_locals_address): Renamed from frame_locals_address.
(h8300_pop_frame): Renamed from pop_frame.
(h8300_print_register_hook): Renamed from print_register_hook.
-------------------------------------------------------------------
handle the situation where the argument is an integer, not an
address -- arguably the most common case. This matters on
targets where pointers and addresses are different.
floatformat_is_nan and floatformat_mantissa.
* utils.c: Include "gdb_assert.h".
(floatformat_is_negative): New function.
(floatformat_is_nan): New function.
(floatformat_mantissa): New function.
* valprint.c: Include "floatformat.h".
(print_floating): Get rid of the Linux-specific
TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
help these new functions. Print NaN's in a format conforming to
ISO C99.
which define include paths used when compiling.
* util.c (savestring, msavestring): Change type of length argument.
* defs.h (savestring, msavestring): Update to match.
* ocd.c (ocd_xfer_memory): Ditto.
* ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
* MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
buildable with ,-Werror.
* Makefile.in (symfile_h): Define.
(mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
* mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
* MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
,-Werror.
* dsrec.c (make_srec): Fix internal_error fmt arg.
* MAINTAINERS: Document i960-coff as buildable with ,-Werror.
* mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
parameter to mn10200_analyze_prologue.
* config/mn10200/tm-mn10200.h: Include "regcache.h".
* MAINTAINERS: Document that mn10200-elf target is buildable.
* printcmd.c (print_address_numeric): Update comments to refer
to sizeof addr, not sizeof pointer.
(x_command): Remove needless whitespace (shorten long line).
! 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
! 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
! 2001-02-10 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
! 2001-01-27 Christopher Faylor <cgf@cygnus.com>
* configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
* configure.host: Recognize sparc64-*-linux* as a linux host.
From 2000-03-17 Jakub Jelinek <jakub@redhat.com>:
* config/sparc/tm-sp64linux.h: New file.
