This patch cleans up some minor inconsistencies in target delegation.
It's primary purpose is to avoid confusion in the code. A few spots
were checking the "beneath" target; however this can only be NULL for
the dummy target, so such tests are not needed. Some other spots were
iterating over the beneath targets, looking for a method
implementation. This is not needed for methods handled by
make-target-delegates, as there is always an implementation.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Simplify delegation.
* linux-thread-db.c (thread_db_pid_to_str): Always delegate.
* windows-nat.c (windows_xfer_partial): Always delegate.
* record-btrace.c (record_btrace_xfer_partial): Simplify
delegation.
(record_btrace_fetch_registers, record_btrace_store_registers)
(record_btrace_prepare_to_store, record_btrace_resume)
(record_btrace_wait, record_btrace_find_new_threads)
(record_btrace_thread_alive): Likewise.
* procfs.c (procfs_xfer_partial): Always delegate.
* corelow.c (core_xfer_partial): Always delegate.
* sol-thread.c (sol_find_new_threads): Simplify delegation.
This converts to_get_thread_local_address to use
TARGET_DEFAULT_NORETURN. One possible oddity is that this changes the
text of the kind of exception thrown in some cases. This doesn't seem
to be a problem; in fact perhaps the final call to 'error' in
target_translate_tls_address should be changed to call
generic_tls_error.
2014-07-07 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_get_thread_local_address>: Use
TARGET_DEFAULT_NORETURN.
* target.c (generic_tls_error): New function.
(target_translate_tls_address): Don't search target stack.
* target-delegates.c: Rebuild.
* ppc-linux-tdep.c (ppc_linux_spe_context): Don't search target
stack.
* linux-thread-db.c (thread_db_get_thread_local_address):
Unconditionally call beneath target.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
I have posted:
TLS variables access for -static -lpthread executables
https://sourceware.org/ml/libc-help/2014-03/msg00024.html
and the GDB patch below has been confirmed as OK for current glibcs.
Further work should be done for newer glibcs:
Improve TLS variables glibc compatibility
https://sourceware.org/bugzilla/show_bug.cgi?id=16954
Still the patch below implements the feature in a fully functional way backward
compatible with current glibcs, it depends on the following glibc source line:
csu/libc-tls.c
main_map->l_tls_modid = 1;
gdb/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* linux-thread-db.c (struct thread_db_info): Add td_thr_tlsbase_p.
(try_thread_db_load_1): Initialize it.
(thread_db_get_thread_local_address): Call it if LM is zero.
* target.c (target_translate_tls_address): Remove LM_ADDR zero check.
* target.h (struct target_ops) (to_get_thread_local_address): Add
load_module_addr comment.
gdb/gdbserver/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdbserver/thread-db.c (struct thread_db): Add td_thr_tlsbase_p.
(thread_db_get_tls_address): Call it if LOAD_MODULE is zero.
(thread_db_load_search, try_thread_db_load_1): Initialize it.
gdb/testsuite/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
<HAVE_TLS> (thread_function, main): Initialize it.
* gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
Add clean_restart.
<$have_tls != "">: Check TLSVAR.
Message-ID: <20140410115204.GB16411@host2.jankratochvil.net>
gdb/
2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
PR threads/16216
* linux-thread-db.c (try_thread_db_load): Add parameter
check_auto_load_safe. Move here the file_is_auto_load_safe call.
(try_thread_db_load_from_pdir_1): Move it there from here.
(try_thread_db_load_from_sdir): Update caller.
(try_thread_db_load_from_dir): Move it there from here.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
Right now, "help target" will include this line:
target multi-thread -- Threads and pthreads support
However, it doesn't make sense to invoke "target multi-thread".
This patch fixes the problem by not registering the multi-thread
target. add_target does some needed initialization of the target_ops,
so I broke this out into a new function.
It isn't clear to me whether this patch requires a test case or not.
I'm not sure whether there are other unregistered targets; but if
there are, it seems unlikely that we test for their absence from the
help.
Built and regtested on x86-64 Fedora 18.
* linux-thread-db.c (init_thread_db_ops): Call
complete_target_initialization.
(_initialize_thread_db): Don't call add_target.
* target.c (complete_target_initialization): New function.
(add_target_with_completer): Call it.
* target.h (complete_target_initialization): Declare.
This is a stylistic change to make it so the checker can analyze a
function in linux-thread-db.c.
* linux-thread-db.c (thread_db_load_search): Unconditionally
call do_cleanups.
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* common/gdb_string.h: ... here.
* common/vec.h: Remove #ifndef GDBSERVER conditional inclusion of
gdb_string.h and gdb_assert.h.
gdbserver/
* configure.ac: Add check for strstr.
* config.in: Regenerate.
* configure: Regenerate.
* linux-thread-db.c: #include "gdb_vecs.h".
(try_thread_db_load_from_pdir_1): New arg "subdir". All callers
updated.
(try_thread_db_load_from_pdir): New arg "subdir". All callers updated.
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
gdbserver/
* Makefile.in (SFILES): Add gdb_vecs.c.
(OBS): Add gdb_vecs.o.
(gdb_vecs_h, host_defs_h): New variables.
(thread-db.o): Add $(gdb_vecs_h) dependency.
(gdb_vecs.o): New rule.
* thread-db.c: #include "gdb_vecs.h".
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
PR threads/11692
PR gdb/12203
gdb/
* infrun.c (handle_inferior_event) <new thread>: Don't special
case minus_one_ptid.
<TARGET_WAITKIND_SPURIOUS>: Ditto.
* linux-thread-db.c (thread_get_info_callback): Don't return early
if the thread is zombie.
(thread_from_lwp): Change return type to void. Rewrite stale
comment.
(attach_thread): Don't return early if the thread is zombie,
instead set its "dying" flag.
(thread_db_wait): Don't return TARGET_WAITKIND_SPURIOUS anymore.
(find_new_threads_callback): Don't return early if the thread is
zombie.
gdb/testsuite/
* gdb.threads/create-fail.c: New file.
* gdb.threads/create-fail.exp: New file.
* linux-thread-db.c (inferior_has_bug): New function.
(thread_db_find_new_threads_silently): Return boolean as checked by
inferior_has_bug, describe it in the comments.
(try_thread_db_load_1): Move call to thread_db_find_new_threads_silently
earlier. Abort the initialization if it returned non-zero.
(thread_db_find_new_threads_2): Preinitialize ERR. Check errors also
if UNTIL_NO_NEW,
gdb/testsuite/
* gdb.threads/gcore-thread.exp: Remove variable libthread_db_seen.
Wrap the test into loop for corefile and core0file.
New option "set auto-load safe-path".
* NEWS: New commands "set auto-load safe-path"
and "show auto-load safe-path".
* auto-load.c: Include gdb_vecs.h, readline/tilde.h and completer.h.
(auto_load_safe_path, auto_load_safe_path_vec)
(auto_load_safe_path_vec_update, set_auto_load_safe_path)
(show_auto_load_safe_path, add_auto_load_safe_path, filename_is_in_dir)
(filename_is_in_auto_load_safe_path_vec, file_is_auto_load_safe): New.
(source_gdb_script_for_objfile): New variable is_safe. Call
file_is_auto_load_safe. Return if it is not.
(struct loaded_script): New field loaded.
(maybe_add_script): Add parameter loaded. Initialize SLOT with it.
(print_script): Use LOADED indicator instead of FULL_PATH. Change
output "Missing" to "No".
(_initialize_auto_load): New variable cmd. Initialize
auto_load_safe_path. Register "set auto-load safe-path",
"show auto-load safe-path" and "add-auto-load-safe-path".
* auto-load.h (maybe_add_script): Add parameter loaded.
(file_is_auto_load_safe): New declaration.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: New parameters --with-auto-load-safe-path
and --without-auto-load-safe-path.
* linux-thread-db.c (try_thread_db_load_from_pdir_1)
(try_thread_db_load_from_dir): Check file_is_auto_load_safe first.
* main.c (captured_main): Check file_is_auto_load_safe for
LOCAL_GDBINIT.
* python/py-auto-load.c (gdbpy_load_auto_script_for_objfile): New
variable is_safe. Call file_is_auto_load_safe. Return if it is not.
(source_section_scripts): Call file_is_auto_load_safe. Return if it is
not.
gdb/doc/
New option "set auto-load safe-path".
* gdb.texinfo (Auto-loading): Extend the "show auto-load"
and "info auto-load" examples for safe-path. Put there also references
for "set auto-load safe-path" and "show auto-load safe-path".
New menu item for Auto-loading safe path.
(Auto-loading safe path): New node.
(Python Auto-loading): Update the expected output from "Missing"
to "No".
gdb/testsuite/
New option "set auto-load safe-path".
* gdb.python/py-objfile-script.exp (set auto-load safe-path): New.
* gdb.python/py-section-script.exp (set auto-load safe-path): New.
auto-load: Implementation.
* NEWS: New descriptions for "info auto-load",
"info auto-load gdb-scripts", "info auto-load python-scripts",
"info auto-load local-gdbinit" and "info auto-load libthread-db".
Deprecate "info auto-load-scripts", "set auto-load-scripts on|off"
and "show auto-load-scripts". New description for "set auto-load",
"show auto-load", "set auto-load gdb-scripts",
"show auto-load gdb-scripts", "set auto-load python-scripts",
"show auto-load python-scripts", "set auto-load local-gdbinit",
"show auto-load local-gdbinit", "set auto-load libthread-db" and
"show auto-load libthread-db".
* auto-load.c: Remove include python/python-internal.h. Add includes
exceptions.h, cli/cli-script.h, gdbcmd.h, cli/cli-decode.h and
cli/cli-setshow.h.
(GDB_AUTO_FILE_NAME, source_gdb_script_for_objfile)
(auto_load_gdb_scripts, show_auto_load_gdb_scripts): New.
(gdbpy_global_auto_load): Rename to ...
(global_auto_load): ... here.
(auto_load_local_gdbinit, auto_load_local_gdbinit_pathname)
(auto_load_local_gdbinit_loaded, show_auto_load_local_gdbinit)
(script_language_gdb, source_gdb_script_for_objfile): New.
(struct loaded_script): New field language.
(hash_loaded_script_entry, eq_loaded_script_entry): Calculate also
LANGUAGE.
(maybe_add_script): Add parameter language. Drop redundant
entry.full_path initialization. Initialize entry.language and
(*slot)->language.
(auto_load_objfile_script): Change parameter suffix to language.
Remove the call of maybe_add_script.
Call language->source_script_for_objfile.
(load_auto_scripts_for_objfile, struct collect_matching_scripts_data):
New.
(collect_matching_scripts): Adjust it for
struct collect_matching_scripts_data.
(auto_load_info_scripts_pattern_nl): New variable.
(info_auto_load_scripts): Rename to ...
(auto_load_info_scripts): ... here, add parameter language. Adjust it
for struct collect_matching_scripts_data.
(info_auto_load_gdb_scripts, info_auto_load_local_gdbinit)
(set_auto_load_cmd, auto_load_set_cmdlist_get, show_auto_load_cmd)
(auto_load_show_cmdlist_get, info_auto_load_cmd)
(auto_load_info_cmdlist_get): New.
(_initialize_auto_load): Move add_info of "auto-load-scripts" to
python/py-auto-load.c. New installment for "set auto-load gdb-scripts",
"info auto-load gdb-scripts", "set auto-load local-gdbinit" and
"info auto-load local-gdbinit".
* auto-load.h (struct script_language): New.
(gdbpy_global_auto_load): Rename to ...
(global_auto_load): ... here.
(auto_load_local_gdbinit, auto_load_local_gdbinit_pathname)
(auto_load_local_gdbinit_loaded): New declarations.
(maybe_add_script): New parameter language.
(auto_load_objfile_script): Change parameter suffix to language.
(load_auto_scripts_for_objfile, auto_load_info_scripts_pattern_nl)
(auto_load_info_scripts, auto_load_set_cmdlist_get)
(auto_load_show_cmdlist_get, auto_load_info_cmdlist_get): New
declarations.
* linux-thread-db.c: Include auto-load.h and ctype.h.
(auto_load_thread_db, show_auto_load_thread_db): New.
(struct thread_db_info): New field filename.
(delete_thread_db_info): Call xfree for FILENAME.
(try_thread_db_load): Initialize FILENAME.
(try_thread_db_load_from_pdir, try_thread_db_load_from_dir): Return
if !AUTO_LOAD_THREAD_DB.
(info_auto_load_libthread_db_compare, info_auto_load_libthread_db): New.
(_initialize_thread_db): Install auto_load_thread_db
as "set auto-load libthread-db" and install info_auto_load_libthread_db
as "info auto-load libthread-db".
* main.c (captured_main): Rename gdbpy_global_auto_load to
global_auto_load. Initialize AUTO_LOAD_LOCAL_GDBINIT_PATHNAME and
AUTO_LOAD_LOCAL_GDBINIT_LOADED.
(print_gdb_help): Extend the help for 'local init file'.
* python/py-auto-load.c: Remove a comment about gdb scripts extension.
(GDBPY_AUTO_SECTION_NAME): Extend the comment it is Python specific.
(auto_load_scripts): Rename to ...
(auto_load_python_scripts): ... here, update the comment.
(gdbpy_load_auto_script_for_objfile): New declaration.
(show_auto_load_python_scripts, script_language_python)
(gdbpy_load_auto_script_for_objfile): New.
(source_section_scripts): Refactor the code.
(load_auto_scripts_for_objfile): Rename to ...
(gdbpy_load_auto_scripts_for_objfile): ... here, update the
auto_load_objfile_script caller, drop GDBPY_GLOBAL_AUTO_LOAD checking.
(info_auto_load_python_scripts): New.
(gdbpy_initialize_auto_load): New variables cmd and cmd_name.
Rename "set auto-load-scripts" to "set auto-load python-scripts".
Register "set auto-load-scripts" as its deprecated alias. Register
"info auto-load python-scripts". Register "info auto-load-scripts" as
its deprecated alias.
(load_auto_scripts_for_objfile): Rename to ...
(gdbpy_load_auto_scripts_for_objfile): ... here.
* python/python.h (load_auto_scripts_for_objfile): Rename to ...
(gdbpy_load_auto_scripts_for_objfile): ... here.
gdb/doc/
auto-load: Implementation.
* gdb.texinfo (Mode Options): New anchor for -nx.
(Startup): New anchors for Option -init-eval-command,
Home Directory Init File
and Init File in the Current Directory during Startup.
Mention set auto-load local-gdbinit with a reference.
Change the sample code to "set auto-load python-scripts".
(Threads): New anchor set libthread-db-search-path.
Provide references to libthread_db.so.1 file.
(Controlling GDB): New menu item for Auto-loading.
(Auto-loading, Init File in the Current Directory)
(libthread_db.so.1 file, objfile-gdb.gdb file): New nodes.
(Python): Rename the menu item Auto-loading to Python Auto-loading.
(Writing a Pretty-Printer, Objfiles In Python): Update the renamed
reference.
(Auto-loading): Rename to ...
(Python Auto-loading): ... here. Change "set auto-load-scripts" to
"set auto-load python-scripts", new anchor for it. Change
"show auto-load-scripts" to "show auto-load python-scripts", new anchor
for it. Change "info auto-load-scripts"
to "info auto-load python-scripts", new anchor for it. Change "scripts"
to "Python scripts".
gdb/testsuite/
auto-load: Implementation.
* gdb.base/help.exp (test set height): Increase the height.
* gdb.python/py-objfile-script.exp (info auto-load-scripts): Change
to ...
(info auto-load python-scripts): ... here.
* gdb.python/py-section-script.exp (info auto-load-scripts *): Change
to ...
(info auto-load python-scripts *): ... here.
libthread_db when we load libpthread or the main symbol file.
(thread_db_inferior_created): New function.
(_initialize_thread_db): Attach inferior_created observer.
* linux-nat.c (linux_child_post_attach): Remove call to
check_for_thread_db.
(linux_child_post_startup_inferior): Ditto.
* objfiles.h (OBJF_MAINLINE): Define.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Pass it to
allocate_objfile when appropriate.
* inferior.h (ALL_INFERIORS): New.
* linux-thread-db.c (thread_db_find_new_threads_2): Remove check
for a stopped thread.
(thread_db_find_new_threads): Look for threads in all inferiors.
* linux-nat.c (in_pid_list_p): New.
(linux_record_stopped_pid): Delete.
(lin_lwp_attach_lwp): Check if PTRACE_ATTACH failed because we're
already attached to the LWP. Return an indication if so.
(linux_nat_filter_event): Adjust.
* linux-thread-db.c (attach_thread): Handle lin_lwp_attach_lwp
returning an indication to ignore this thread.
(try_thread_db_load_from_pdir): Call it. If unable to find
libthread_db in directory of libpthread, see if we're looking at
the separate-debug-info copy.
* NEWS: Mention $sdir,$pdir.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
* linux-thread-db.c (try_thread_db_load_from_pdir): New function.
(try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $pdir, $sdir. Remove trying of
system directories if search of libthread-db-search-path fails,
that is now done via $sdir.
(has_libpthread): New function.
(thread_db_load): Remove search for libthread_db in directory of
libpthread, that is now done via $pdir.
gdbserver/
* thread-db.c (try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $sdir, ignore $pdir.
Remove trying of system directories if search of
libthread-db-search-path fails, that is now done via $sdir.
doc/
* gdb.texinfo (Threads): Document $sdir,$pdir.
(Server): Document $pdir exception.
(_initialize_thread_db): Add setter for libthread-db-search-path.
gdbserver/
* thread-db.c (thread_db_handle_monitor_command): Handle elided path.
doc/
* gdb.texinfo (Threads): If an empty path is provided for
libthread-db-search-path it is reset to its default value.
(Server): Ditto.
* linux-thread-db.c (find_new_threads_callback): Exit on zero TI_TID
even if !TARGET_HAS_EXECUTION.
gdb/testsuite/
* gdb.threads/gcore-thread.exp ($core0file): New variable.
(clear __stack_user.next, clear stack_used.next)
(save a zeroed-threads corefile): New test.
Call core_load for $core0file.
(zeroed-threads cannot be listed): New test.
