* frame.c (frame_unwind_address_in_block): Delete.
(get_frame_address_in_block): Do not use it. Check the type
of the next frame first.
(frame_cleanup_after_sniffer): Update comment.
* frame.h (frame_unwind_address_in_block): Delete prototype.
* hppa-tdep.c (hppa_find_unwind_entry_in_block): Update comment.
(get_frame_func): Do not use it.
* frame.h (frame_func_unwind): Delete prototype.
* hppa-tdep.c (hppa_frame_cache): Update comment.
* rs6000-tdep.c (rs6000_frame_cache): Update comment.
(mips_n32n64_push_dummy_call, mips_o64_return_value)
(mips_eabi_push_dummy_call): Update call to fp_register_arg_p.
(MIPS_FPU_TYPE): Add gdbarch as parameter and replace current_gdbarch.
(fp_register_arg_p, mips_dump_tdep, show_mipsfpu_command)
(mips_n32n64_fp_arg_chunk_p): Update caller.
(mips_n32n64_fp_arg_chunk_p): Add gdbarch as paramter.
(mips_n32n64_push_dummy_call): Update caller.
(MIPS_LAST_ARG_REGNUM): Add gdbarch as parameter and replace
current_gdbarch.
(mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call)
(mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update caller.
(MIPS_LAST_FP_ARG_REGNUM): Add gdbarch as parameter and replace
current_gdbarch.
(mips_eabi_push_dummy_call, mips_o32_push_dummy_call)
(mips_o64_push_dummy_call): Update caller.
(MIPS_EABI): Add gdbarch as parameter and replace current_gdbarch.
(fp_register_arg_p, mips_dump_tdep): Update caller.
(set_reg_offset): Add gdbarch as parameter and replace current_gdbarch.
(mips16_scan_prologue, mips32_scan_prologue): Update caller.
(reset_saved_regs): Make static. Add gdbarch as parameter. Replace
current_gdbarch.
(mips32_scan_prologue): Update caller.
(heuristic_proc_start): Add gdbarch as parameter. Replace
current_gdbarch.
(mips_insn16_frame_cache, mips_insn32_frame_cache): Update caller.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture. Update call to getregs_supplies.
(getregs_supplies): Add gdbarch as parameter and replace
current_gdbarch.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use get_frame_arch to
get at the current architecture. Update call to NBSD_MIPS_JB_OFFSET and
NBSD_MIPS_JB_ELEMENT_SIZE.
(NBSD_MIPS_JB_ELEMENT_SIZE, NBSD_MIPS_JB_OFFSET): Add gdbarch and
replace current_gdbarch.
* remote-mips.c (mips_map_regno): Add gdbarch as parameter and replace
current_gdbarch.
(mips_fetch_registers, mips_store_registers): Update call
to mips_map_regno.
(mips_load): Use get_regcache_arch to get at the current_architecture
and replace current_gdbarch.
Rewrite continuations internals on top of cleanups and plug
continuation arguments leaks.
* defs.h (struct continuation): Make it opaque.
(add_continuation, add_intermediate_continuation): Drop the int
argument of the continuation hook argument. Add
continuation_free_args argument.
(do_all_continuations, do_all_intermediate_continuations): Drop
the error_p argument.
* utils.c (add_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_continuations): Drop error argument. Reimplement on top
of cleanups.
(discard_all_continuations): Reimplement on top of cleanups.
(add_intermediate_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_intermediate_continuations): Drop error argument.
Reimplement on top of cleanups.
(discard_all_intermediate_continuations): Reimplement on top of
cleanups.
* breakpoint.c (until_break_command_continuation): Drop error
argument. Add xfree as continuation argument deleter.
* inf-loop.c (inferior_event_handler): On error, discard all
continuations. Adjust to new do_all_intermediate_continuations
and do_all_continuations interfaces.
* infcmd.c (step_1_continuation): Drop error_p argument. Adjust.
Pass xfree as continuation argument deleter.
(finish_command_continuation): Drop error_p argument. Adjust.
(finish_command_continuation_free_arg): New.
(finish_command): Pass finish_command_continuation_free_arg as
continuation argument deleter. Adjust to new do_all_continuations
interfaces.
(attach_command_continuation): Drop error_p argument.
(attach_command_continuation_free_args): New.
(attach_command): Pass attach_command_continuation_free_args as
continuation argument deleter.
* interps.c (interp_set): Adjust to new do_all_continuations
interfaces.
* event-top.c (stdin_event_handler): In error, also discard the
intermediate continuations.
* top.c (execute_command): Remove unused arg1 and arg2 locals.
* breakpoint.c (struct until_break_command_continuation_args):
New.
(until_break_command_continuation): Take a void* instead of a
continuations_arg. Adjust.
(until_break_command): Adjust to use struct
until_break_command_continuation_args instead of struct
continuation_arg.
* infcmd.c (struct step_1_continuation_args): New.
(step_1_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct step_1_continuation_args.
(step_once): Adjust to use struct step_1_continuation_args.
(struct finish_command_continuation_args): New.
(finish_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
finish_command_continuation_args.
(finish_command): Adjust to use struct
finish_command_continuation_args.
(struct attach_command_continuation_args): New.
(attach_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
attach_command_continuation_args.
(attach_command): Adjust to use struct
attach_command_continuation_args.
* defs.h (struct continuation_arg): Delete.
(struct continuation): Replace the struct continuation_arg*
parameter of continuation_hook by a void*. Replace "arg_list"
member by a new "args" member with void* type.
(add_continuation, add_intermediate_continuation): Replace struct
continuation_arg type usages by void* usages.
* utils.c (add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Replace struct
continuation_arg type usages by void* usages. Pass "args" instead
of "arg_list".
* infrun.c (struct thread_stepping_state): Delete sal member.
(init_thread_stepping_state): Add local sal. Use it instead of
tss->sal.
(handle_inferior_event): New local stop_pc_sal. Use it instead of
tss->sal.
(step_into_function): Add local stop_func_sal. Use it instead of
tss->sal.
* gdbthread.h (find_thread_id): Declare.
* thread.c (find_thread_id): Make non-static.
* mi/mi-main.c (mi_cmd_execute): Switch to the right
thread and frame, if necessary.
* mi/mi-parse.c (mi_parse): Handle --thread and --frame.
* mi/mi-parse.h (strcut mi_parse): New fields thread and frame.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* infcmd.c (proceed_thread_callback, do_context_switch_to): New.
(continue_command): Add "-a" option.
(interrupt_target_command): Add "-a" option.
(_initialize_infcmd): Add extend help of continue and interrupt
command to mention the new "-a" option. Mark "continue" async ok.
* linux-nat.c (linux_test_for_tracefork): Block events while we're
here.
(get_pending_status): Implement non-stop mode.
(linux_nat_detach): Stop threads before detaching.
(linux_nat_resume): In non-stop mode, always resume only a single
PTID.
(linux_handle_extended_wait): On a clone event, in non-stop mode,
add new lwp to GDB's thread table, and mark as running, executing
and stopped appropriately.
(linux_nat_filter_event): Don't assume there are other running
threads when a thread exits.
(linux_nat_wait): Mark the main thread as running and executing.
In non-stop mode, don't stop all lwps.
(linux_nat_kill): Stop lwps before killing them.
(linux_nat_thread_alive): Use signal 0 to detect if a thread is
alive.
(send_sigint_callback): New.
(linux_nat_stop): New.
(linux_nat_add_target): Set to_stop to linux_nat_stop.
* linux-nat.h (thread_db_attach_lwp): Declare.
* linux-thread-db.c (thread_get_info_callback): Check for new
threads if we have none.
(thread_from_lwp, enable_thread_event): Set proc_handle.pid to the
stopped lwp. Check for new threads if we have none.
(thread_db_attach_lwp): New.
(thread_db_init): Set proc_handle.pid to inferior_ptid.
(check_event): Set proc_handle.pid to the stopped lwp.
(thread_db_find_new_threads): Set proc_handle.pid to any stopped
lwp available, bail out if there is none.
* linux-fork.c (linux_fork_killall): Use SIGKILL instead of
PTRACE_KILL.
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
* infrun.c (proceed): Clear the stepping state, set
previous_inferior_ptid and clear infwait state.
(wait_for_inferior): Don't clear the stepping state, set
previous_inferior_ptid, or clear the infwait state here.
(fetch_inferior_event): Don't clear the stepping state, set
previous_inferior_ptid, or clear the infwait state here. Don't
condition on wait_for_more.
* infrun.c (currently_stepping): Take a struct
thread_stepping_state instead of an execution_control_state.
(struct thread_stepping_state): New, split from
execution_control_state.
(gtss, tss): New globals.
(proceed): Clear the stepping state, set previous_inferior_ptid
and clear infwait state.
(init_wait_for_inferior): Clear the stepping state,
previous_inferior_ptid and infwait state.
(waiton_ptid, infwait_state): New, split from
execution_control_state.
(struct execution_control_state): Members that persist through
events moved out to either struct thred_stepping_state or made
global. Deleted unneeded wp, saved_inferior_ptid, tmpstatus.
(wait_for_inferior, fetch_inferior_event): Use local
execution_control_state. Update to execution_control_state split.
(init_execution_control_state): Adjust.
(init_thread_stepping_state): New, extracted from
init_execution_control_state.
(context_switch): Take a ptid instead of an
execution_control_state.
(context_switch_to): Adjust.
(adjust_pc_after_break): Adjust.
(init_infwait_state): New.
(handle_inferior_event): Adjust.
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
* target.h (struct target_waitstatus): Store related_pid as a ptid.
(inferior_has_forked, inferior_has_vforked, inferior_has_execd):
Take a ptid_t.
* breakpoint.h (struct breakpoint): Change forked_inferior_pid
type to ptid.
* breakpoint.c (print_it_typical, bpstat_check_location)
(print_one_breakpoint_location, set_raw_breakpoint_without_location)
(create_fork_vfork_event_catchpoint): Adjust.
* infrun.c (fork_event): Change parent_pid and child_pid types to
ptid.
(follow_exec, inferior_has_forked, inferior_has_vforked)
(inferior_has_execd): Take a ptid_t and don't trim it.
* linux-thread-db.c (thread_db_wait): Don't trim the returned ptid.
* linux-nat.c (linux_child_follow_fork): Adjust.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait): Adjust.
* win32-nat.c (get_win32_debug_event): Don't set related_pid.
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
2008-07-09 Pedro Alves <pedro@codesourcery.com>
* symfile.c (load_command): Reopen the exec file and reread
symbols before anything else.
gdb/testsuite/
2008-07-09 Pedro Alves <pedro@codesourcery.com>
* gdb.base/chng-syms.exp: Don't expect "No symbol ...".
(remote_sim_ptid): New global.
(gdbsim_create_inferior): Silently add the main task to GDB's
thread list.
(gdbsim_close, gdbsim_mourn_inferior): Silently delete the main
task from GDB's thread list.
(gdbsim_resume): Adjust to use remote_sim_ptid.
(gdbsim_thread_alive, gdbsim_pid_to_str): New.
(init_gdbsim_ops): Register gdbsim_thread_alive and
gdbsim_pid_to_str.
(_initialize_remote_sim): Initialize remote_sim_ptid.
* Makefile.in (remote-sim.o): Depend on $(gdbthread_h).
* breakpoint.c (bpstat_copy): Call RELEASE_VALUE on the new OLD_VAL.
gdb/testsuite/
* gdb.base/value-double-free.exp, gdb.base/value-double-free.c: New.
-target-download and -target-select via CLI, so that
the quoting rules are the same as they were (unfortunately)
in all prior gdb releases.
* mi/mi-cmds.h (mi_cmd_exec_run, mi_cmd_exec_until)
(mi_cmd_target_download, mi_cmd_target_select): Remove.
* mi/mi-main.c (mi_cmd_exec_run, mi_cmd_exec_until)
(mi_cmd_target_download, mi_cmd_target_select): Remove.
(mi_cmd_execute): Set current_token even for commands
routed via CLI.
(captured_mi_execute_command_args): Remove.
(captured_mi_execute_command): Cast the closure to mi_parse
pointer, not to captured_mi_execute_command_args, and don't
set the action field thereof.
(mi_execute_command): Pass struct mi_parse, not
captured_mi_execute_command_args to captured_mi_execute_command.
(mi_execute_command): Remove (dead) code for suppressing
printing prompt.
(i386_push_dummy_call): Determine stack space required for
arguments going forwards allowing for 16-byte alignment, then push
arguments going forwards.
* monitor.c (monitor_open): Include "gdbthread.h". Clear thread
list here.
* remote.c (record_currthread): Upgrade the main thread and its
entry in the thread list if this is the first time we hear about
threads.
(remote_thread_alive): Consider magic_null_ptid or a ptid without
a tid member always alive.
(remote_find_new_threads): Don't update the main thread here.
(remote_start_remote): Clear thread list here. Always add the
main thread.
(extended_remote_attach_1): Add the main thread here.
(extended_remote_mourn_1): Re-add the main thread here.
(extended_remote_create_inferior_1): Add a main thread.
* Makefile.in (monitor.o): Depend on $(gdbthread_h).
* remote.c (magic_null_ptid, not_sent_ptid, any_thread_ptid): New
globals.
(general_thread, continue_thread): Change type to ptid_t.
(record_currthread): Take a ptid_t parameter instead of an
integer.
(MAGIC_NULL_PID): Delete.
(set_thread): Take a ptid_t parameter and adjust.
(set_general_thread, set_continue_thread): New.
(remote_thread_alive, remote_newthread_step)
(remote_current_thread, remote_find_new_threads)
(remote_threads_info, remote_start_remote, remote_vcont_resume)
(remote_resume_1, remote_wait, extended_remote_create_inferior_1)
(threadalive_test, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
(_initialize_remote): Initialize magic_null_ptid, not_sent_ptid
and any_thread_ptid.
(gdb_stdint_h, gdb_stdint.h, stamp-int): Delete. Remove
all dependencies on $(gdb_stdint_h).
(distclean): Do not delete gdb_stdint.h.
* acinclude.m4: Do not use stdint.m4.
* configure.ac: Set GNULIB_STDINT_H. Remove tests for stdint.h,
uintptr_t, and gdb_stdint.h.
* defs.h: Include <stdint.h>.
* gdb_thread_db.h: Assume stdint.h is already included.
* breakpoint.c, findcmd.c, hppa-tdep.c, inf-ptrace.c, proc-service.c,
rs6000-nat.c, spu-linux-nat.c, target.c, win32-nat.c: Do not
include gdb_stdint.h.
* configure, config.in: Regenerate.
decimal floating-point values in GPRs for soft-float.
(do_ppc_sysv_return_value): Handle returning decimal
floating-point values in GPRs for soft-float.
* c-exp.y (parse_number): Move the S and SAVED_CHAR initialization
after the DECFLOAT detection to fix a memory leak. Remove the
redundant NUM initialization. Protect the DECFLOAT detection memory
access before the P block. Restore the P memory content for the
DECFLOAT detection.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Do no print
^running here.
(mi_on_resume): Print ^running if not previously output.
* mi/mi-main.c (running_result_record_printed): New.
(captured_mi_execute_command): Reset
running_result_record_printed. Use running_result_record_printed
to decide if we should skip ^done.
(mi_execute_async_cli_command): Don't print ^running here.
* mi/mi-main.h (current_token, running_result_record_printed):
Declare.
* infrun.c (finish_command): Don't pass cleanup
to continuation.
(finish_command_continuation): Don't grab cleanup from
the passed data, as we don't use, and cannot, use it anyway.
* defs.h (make_cleanup_restore_integer): New declaration.
(struct cleanup): New field free_arg.
(make_my_cleanup_2): New.
* utils.c (restore_integer_closure, restore_integer)
(make_cleanup_restore_integer): New.
(make_my_cleanup): Initialize the free_arg field and
renamed to make_my_cleanup_2.
(do_my_cleanups): Call free_arg.
(discard_cleanups): Call free_arg.
* breakpoint.c (restore_always_inserted_mode): Remove.
(update_breakpoints_after_exec): Use make_cleanup_restore_integer.
* completer.c (complete_line): Don't special-case
expression_completer.
(expression_completer): Only pass last word to
location_completer.
* c-exp.y (yylex): Check 'token', not 'operator'.
gdb/testsuite
* gdb.base/completion.exp: New tests for field name completion
with spaces, and field name completion with '->'.
(deprecated_bcache_added): New function name. Body of function
bcache_data is used here with the addition of 'added' argument.
* bcache.h (deprecated_bcache_added): New function.
* symfile.c (add_psymbol_to_bcache): New helper function, takes part of
work from add_psymbol_to_list - initialises partial symbol and stashes
it in objfile's cache.
(append_psymbol_to_list): New helper function, takes other part of
work from add_psymbol_to_list - adds partial symbol to the given list.
(add_psymbol_to_list): Call helper functions instead of doing work
here. If adding to global list, do not duplicate partial symbols in the
partial symtab.
* dwarf2expr.c: New include "gdb_assert.h".
(new_dwarf_expr_context): Initialize MAX_RECURSION_DEPTH.
(dwarf_expr_eval): Sanity check the RECURSION_DEPTH count.
(execute_stack_op): Error out on too large RECURSION_DEPTH.
Increase/decrease RECURSION_DEPTH around the function.
(main_lm_addr): New.
(svr4_default_sos): Set lm_addr.
(svr4_current_sos): Set lm_addr and main_lm_addr.
(svr4_fetch_objfile_link_map): Rewrite.
(svr4_clear_solib): Clear main_lm_addr.
Joseph Myers <joseph@codesourcery.com>
* mips-tdep.c (mips_eabi_return_value): Replace stub that always
returned RETURN_VALUE_STRUCT_CONVENTION with a real function.
temporary catchpoints. In MI add missing fields 'reason', 'disp',
'bkptno'.
(print_mention_exception_catchpoint): Add 'Temporary' for temporary
catchpoints.
(handle_gnu_v3_exceptions): Use tempflag.
* varobj.c (varobj_update): Report changes as vector. Also
return not just a list of varobj, but a list of special structures
that tell what exactly has changed.
* varobj.h (enum varobj_update_error): Rename to
varobj_scope_status.
(struct varobj_update_result_t): New.
(varobj_update): Adjust prototype.
* mi/mi-cmd-var.c: Adjust for changes.
core_regset_sections.
* gdbarch.c: Refreshed.
* gdbarch.h: Refreshed.
* regset.h (core_regset_section): Declared.
* linux-nat.c (linux_nat_do_thread_registers): Added
support for the new gdbarch struct core_regset_sections.
* utils.c (host_address_to_string): New function.
* defs.h (host_address_to_string): New prototype.
* i386-linux-tdep.c (i386_regset_rections): New register
sections list for i386.
(i386_linux_init_abi): Initialized new gdbarch struct
core_regset_sections.
* Makefile.in: Updated to reflect dependency changes.
* ppc-linux-tdep.c (ppc_regset_sections): Register
sections list for ppc.
(ppc_linux_init_abi): Initialized new gdbarch struct
core_regset_sections
* valprint.c (get_array_bounds): Renames get_array_low_bound.
Return the proper bound value if the array index type is an
enumerated type. Compute the high bound if requested.
(val_print_array_elements): Handle the case when the array
element has a null size.
* ada-valprint.c (print_optional_low_bound): Add handling
for empty arrays or arrays of zero-size elements.
(ada_val_print_array): New function, extracted out from
ada_val_print_1 case TYPE_CODE_ARRAY, and enhanced to
handle empty arrays and arrays of zero-size elements.
(ada_val_print_1)[case TYPE_CODE_ARRAY]: Replace extracted-out
code by call to ada_val_print_array.
(ada_value_print): Remove handling of null array. The handling
was incomplete and is now better handled by ada_val_print_array.
print_binary_chars, print_char_chars): Add byte_order parameter and
replace gdbarch_byte_order.
(print_decimal_chars): Replace START_P, NOT_END_P and NEXT_P by their
expressions and remove them. Remove unused TWO_TO_FOURTH.
(val_print_type_code_int): Introduce gdbarch_byte_order to get at the
endianness. Update call to print_hex_chars.
* valprint.h (print_hex_chars, print_octal_chars, print_decimal_chars,
print_binary_chars, print_char_chars): Add byte_order parameter.
* printcmd.c (print_scalar_formatted): Introduce gdbarch_byte_order to
get at the endianness. Update print_*_char calls to use byte_order.
