Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
Add support for specifying "all threads of inferior N", by writing "*"
as thread number/range in thread ID lists.
E.g., "info threads 2.*" or "thread apply 2.* bt".
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* NEWS: Mention star wildcard ranges.
* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
(number_range_setup_range): New function.
* cli/cli-utils.h (number_range_setup_range): New declaration.
* thread.c (thread_apply_command): Support star TID ranges.
* tid-parse.c (tid_range_parser_finished)
(tid_range_parser_string, tid_range_parser_skip)
(get_tid_or_range, get_tid_or_range): Handle
TID_RANGE_STATE_STAR_RANGE.
(tid_range_parser_star_range): New function.
* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
New value.
(tid_range_parser_star_range): New declaration.
gdb/doc/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads) <thread ID lists>: Document star ranges.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test star wildcard ranges.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
Reference the 'listsize' setting in the help text for the 'list' command
to help users find this setting.
gdb/ChangeLog:
* cli/cli-cmds.c (_initialize_cli_cmds): Extend help text for
'list' command.
When a a user uses 'list +' to list forward through a source file they
eventually reach the end of the source file. Subsequent uses of 'list
+' result in an error message like this, that let the user know they are
at the end of the source file:
Line number XXX out of range; FILENAME has YYY lines.
Compare this to the current behaviour of 'list -' which lists backwards
through a source file. When the user reaches the beginning of the
source file, subsequent uses of 'list -' result in the command silently
returning. This can be confusing if the previous uses of 'list -' have
scrolled off the users display, the user receives no reminder that the
have already seen the start of the file.
After this commit a use of 'list -' when the user has already seen the
start of a file will receive the following error:
Already at the start of FILENAME.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Add an error when trying to use
'-' to scan read off the start of the source file.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_forward): Add end of file error
test.
(test_repeat_list_command): Add end of file error test.
(test_list_backwards): Add beginning of file error test.
There is an inconsistency with the handling of the special +/- arguments
to the list command.
For the very first time that list is used (after the inferior has
changed locations) then only the first character of the argument string
is checked, so 'list +BLAH' will operate as 'list +' and 'list -----FOO'
will operate as 'list -'. This compares to each subsequent use of list,
where the whole argument string is checked, so 'list +BLAH' will try to
list lines of code around the function '+BLAH'.
This commit unifies the behaviour so that the whole argument string is
checked, in order to list the next 10, or previous 10 lines from a file
only 'list +' and 'list -' are now valid.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Check that the argument string is
a single character, either '+' or '-'.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_invalid_args): New function,
defined, and called.
Move handling of special +/- arguments to the list_command function
inside a single if block, this helps group all related functionality
together. There should be no user visible changes after this commit.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Move all handling of +/-
arguments into a single if block.
Small code cleanup, use NULL instead of 0 when checking pointers. There
should be no user visible changes after this commit.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Use NULL instead of 0 when
checking pointers.
The 'add_info' function is used for creating info commands, these
commands should be created as 'class_info' rather than 'no_class'.
gdb/ChangeLog:
* cli/cli-decode.c (add_info): Switch to class_info.
gdb/ChangeLog:
PR python/18938
* cli/cli-cmds (source_script_fron_sctream): New arg file_to_open.
All callers updated.
gdb/testsuite/ChangeLog:
* gdb.python/python.exp: Add test for symlink from .py file to .notpy
file.
There are a bunch of places where a void* is implicitely casted into a
gdb_byte*. The auto-insert-casts script added explicit casts at those
places. However, in many cases, it makes more sense to just change the
void* to a gdb_byte*.
gdb/ChangeLog:
* aarch64-tdep.c (stack_item_t): Change type of data to gdb_byte*.
* arm-tdep.c (struct stack_item): Likewise.
(push_stack_item): Add gdb_byte* cast.
* avr-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* cli/cli-dump.c (dump_memory_to_file): Change type of buf to gdb_byte*
and add cast.
* cris-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* gcore.c (gcore_copy_callback): Change type of memhunk to gdb_byte* and
add cast.
* gdbtypes.h (print_scalar_formatted): Change type of first parameter to
gdb_byte*.
* h8300-tdep.c (h8300_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(h8300h_extract_return_value): Likewise.
(h8300_store_return_value): Change type of valbuf to gdb_byte*.
(h8300h_store_return_value): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
* jit.c (jit_reader_try_read_symtab): Change type of gdb_mem to gdb_byte*
and add cast.
* m32r-tdep.c (m32r_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(m32r_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* mep-tdep.c (mep_pseudo_cr32_read): Change type of buf to gdb_byte*.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_csr_write): Likewise.
(mep_pseudo_cr32_write): Likewise.
(mep_pseudo_cr64_write): Likewise.
* mi/mi-main.c (mi_cmd_data_write_memory): Change type of buffer to
gdb_byte* and add cast.
* moxie-tdep.c (moxie_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(moxie_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* p-valprint.c (print_scalar_formatted): Change type of valaddr to
gdb_byte*.
* printcmd.c (void): Likewise.
* python/py-inferior.c (infpy_read_memory): Change type of buffer to
gdb_byte* and add cast.
(infpy_write_memory): Likewise.
(infpy_search_memory): Likewise.
* regcache.c (regcache_raw_write_signed): Change type of buf to gdb_byte*
and add cast.
(regcache_raw_write_unsigned): Likewise.
(regcache_cooked_write_signed): Likewise.
(regcache_cooked_write_unsigned): Likewise.
* sh64-tdep.c (h64_extract_return_value): Change type of valbuf to
gdb_byte*.
Following failures are noticed for avr-gdb. This may be the case
for targets like AVR which has integer_to_address hook defined.
FAIL: gdb.base/dump.exp: struct copy, srec; value restored ok
FAIL: gdb.base/dump.exp: struct copy, ihex; value restored ok
FAIL: gdb.base/dump.exp: struct copy, tekhex; value restored ok
These tests are failed because load_offset(bias) of restore command
parsed as address.
command: restore filename [binary] bias start end
Except binary, other BFDs have a built-in location; gdb restores content
at offset 'bias' from that location. So, 'bias' of 'restore' command should
be parsed as address only when the file is binary.
Below patch changes gdb to parse 'bias' as long if the file is not binary.
gdb/ChangeLog
2015-10-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* cli/cli-dump.c (restore_command): Parse load_offset (bias) as address
only when the file is binary.
Two missing consts, found while doing cxx-conversion work. We end up
with a char*, even though we pass a const char* to strstr. I am pushing
this as obvious.
gdb/ChangeLog:
* cli/cli-setshow.c (cmd_show_list): Constify a variable.
* linespec.c (linespec_lexer_lex_string): Same.
This adds an object oriented replacement for the "struct continuation"
mechanism, and converts the stepping commands (step, next, stepi,
nexti) and the "finish" commands to use it.
It adds a new thread "class" (struct thread_fsm) that contains the
necessary info and callbacks to manage the state machine of a thread's
execution command.
This allows getting rid of some hacks. E.g., in fetch_inferior_event
and normal_stop we no longer need to know whether a thread is doing a
multi-step (e.g., step N). This effectively makes the
intermediate_continuations unused -- they'll be garbage collected in a
separate patch. (They were never a proper abstraction, IMO. See how
fetch_inferior_event needs to check step_multi before knowing whether
to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.)
The target async vs !async uiout hacks in mi_on_normal_stop go away
too.
print_stop_event is no longer called from normal_stop. Instead it is
now called from within each interpreter's normal_stop observer. This
clears the path to make each interpreter print a stop event the way it
sees fit. Currently we have some hacks in common code to
differenciate CLI vs TUI vs MI around this area.
The "finish" command's FSM class stores the return value plus that
value's position in the value history, so that those can be printed to
both MI and CLI's streams. This fixes the CLI "finish" command when
run from MI -- it now also includes the function's return value in the
CLI stream:
(gdb)
~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n"
~"35\t}\n"
+~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
-FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output
+PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add thread-fsm.o.
* breakpoint.c (handle_jit_event): Print debug output.
(bpstat_what): Split event callback handling to ...
(bpstat_run_callbacks): ... this new function.
(momentary_bkpt_print_it): No longer handle bp_finish here.
* breakpoint.h (bpstat_run_callbacks): Declare.
* gdbthread.h (struct thread_info) <step_multi>: Delete field.
<thread_fsm>: New field.
(thread_cancel_execution_command): Declare.
* infcmd.c: Include thread-fsm.h.
(struct step_command_fsm): New.
(step_command_fsm_ops): New global.
(new_step_command_fsm, step_command_fsm_prepare): New functions.
(step_1): Adjust to use step_command_fsm_prepare and
prepare_one_step.
(struct step_1_continuation_args): Delete.
(step_1_continuation): Delete.
(step_command_fsm_should_stop): New function.
(step_once): Delete.
(step_command_fsm_clean_up, step_command_fsm_async_reply_reason)
(prepare_one_step): New function, based on step_once.
(until_next_command): Remove step_multi reference.
(struct return_value_info): New.
(print_return_value): Rename to ...
(print_return_value_1): ... this. New struct return_value_info
parameter. Adjust.
(print_return_value): Reimplement as wrapper around
print_return_value_1.
(struct finish_command_fsm): New.
(finish_command_continuation): Delete.
(finish_command_fsm_ops): New global.
(new_finish_command_fsm, finish_command_fsm_should_stop): New
functions.
(finish_command_fsm_clean_up, finish_command_fsm_return_value):
New.
(finish_command_continuation_free_arg): Delete.
(finish_command_fsm_async_reply_reason): New.
(finish_backward, finish_forward): Change symbol parameter to a
finish_command_fsm. Adjust.
(finish_command): Create a finish_command_fsm. Adjust.
* infrun.c: Include "thread-fsm.h".
(clear_proceed_status_thread): Delete the thread's FSM.
(infrun_thread_stop_requested_callback): Cancel the thread's
execution command.
(clean_up_just_stopped_threads_fsms): New function.
(fetch_inferior_event): Handle the event_thread's should_stop
method saying the command isn't done yet.
(process_event_stop_test): Run breakpoint callbacks here.
(print_stop_event): Rename to ...
(print_stop_location): ... this.
(restore_current_uiout_cleanup): New function.
(print_stop_event): Reimplement.
(normal_stop): No longer notify the end_stepping_range observers
here handle "step N" nor "finish" here. No longer call
print_stop_event here.
* infrun.h (struct return_value_info): Forward declare.
(print_return_value): Declare.
(print_stop_event): Change prototype.
* thread-fsm.c: New file.
* thread-fsm.h: New file.
* thread.c: Include "thread-fsm.h".
(thread_cancel_execution_command): New function.
(clear_thread_inferior_resources): Call it.
* cli/cli-interp.c (cli_on_normal_stop): New function.
(cli_interpreter_init): Install cli_on_normal_stop as normal_stop
observer.
* mi/mi-interp.c: Include "thread-fsm.h".
(restore_current_uiout_cleanup): Delete.
(mi_on_normal_stop): If the thread has an FSM associated, and it
finished, ask it for the async-reply-reason to print. Always call
print_stop_event here, regardless of the top-level interpreter.
Check bpstat_what to tell whether an asynchronous breakpoint hit
triggered.
* tui/tui-interp.c (tui_on_normal_stop): New function.
(tui_init): Install tui_on_normal_stop as normal_stop observer.
gdb/testsuite/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-cli.exp: Add CLI finish tests.
In the following code:
struct symbol *wsym = (struct symbol *) NULL;
the cast of NULL is redundant, it adds noise, and is just one more thing
to change if the type of wsym ever changes. There are a relatively
small number of places in gdb where the above code pattern is used.
Usually the cast is removed like this:
struct symbol *wsym = NULL;
This commit updates all the places within the gdb/cli directory where we
cast NULL during assignment, removing the cast.
gdb/ChangeLog:
* cli/cli-decode.c (find_cmd): Remove cast of NULL pointer.
The "source centric" /m option to the disassemble command is often
unhelpful, e.g., in the presence of optimized code.
This patch adds a /s modifier that is better.
For one, /m only prints instructions from the originating source file,
leaving out instructions from e.g., inlined functions from other files.
gdb/ChangeLog:
PR gdb/11833
* NEWS: Document new /s modifier for the disassemble command.
* cli/cli-cmds.c (disassemble_command): Add support for /s.
(_initialize_cli_cmds): Update online docs of disassemble command.
* disasm.c: #include "source.h".
(struct deprecated_dis_line_entry): Renamed from dis_line_entry.
All uses updated.
(dis_line_entry): New struct.
(hash_dis_line_entry, eq_dis_line_entry): New functions.
(allocate_dis_line_table): New functions.
(maybe_add_dis_line_entry, line_has_code_p): New functions.
(dump_insns): New arg end_pc. All callers updated.
(do_mixed_source_and_assembly_deprecated): Renamed from
do_mixed_source_and_assembly. All callers updated.
(do_mixed_source_and_assembly): New function.
(gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
DISASSEMBLY_SOURCE. All uses updated.
(DISASSEMBLY_SOURCE): New macro.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
gdb/doc/ChangeLog:
* gdb.texinfo (Machine Code): Update docs for mixed source/assembly
disassembly.
(GDB/MI Data Manipulation): Update docs for new disassembly modes.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-disassemble.exp: Update.
* gdb.base/disasm-optim.S: New file.
* gdb.base/disasm-optim.c: New file.
* gdb.base/disasm-optim.h: New file.
* gdb.base/disasm-optim.exp: New file.
This patch converts the code base to use the new struct event_location
API being introduced. This patch preserves the current functionality and
adds no new features.
The "big picture" API usage introduced by this patch may be illustrated
with a simple exmaple. Where previously developers would write:
void
my_command (char *arg, int from_tty)
{
create_breakpoint (..., arg, ...);
...
}
one now uses:
void
my_command (char *arg, int from_tty)
{
struct event_locaiton *location;
struct cleanup *back_to;
location = string_to_event_locaiton (&arg, ...);
back_to = make_cleanup_delete_event_location (location);
create_breakpoint (..., location, ...);
do_cleanups (back_to);
}
Linespec-decoding functions (now called location-decoding) such as
decode_line_full no longer skip argument pointers over processed input.
That functionality has been moved into string_to_event_location as
demonstrated above.
gdb/ChangeLog
* ax-gdb.c: Include location.h.
(agent_command_1) Use linespec location instead of address
string.
* break-catch-throw.c: Include location.h.
(re_set_exception_catchpoint): Use linespec locations instead
of address strings.
* breakpoint.c: Include location.h.
(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_breakpoints_after_exec):
Use linespec location instead of address string.
(print_breakpoint_location): Use locations and
event_location_to_string.
Print extra_string for pending locations for non-MI streams.
(print_one_breakpoint_location): Use locations and
event_location_to_string.
(init_raw_breakpoint_without_location): Initialize b->location.
(create_thread_event_breakpoint): Use linespec location instead of
address string.
(init_breakpoint_sal): Likewise.
Only save extra_string if it is non-NULL and not the empty string.
Use event_location_to_string instead of `addr_string'.
Constify `p' and `endp'.
Use skip_spaces_const/skip_space_const instead of non-const versions.
Copy the location into the breakpoint.
If LOCATION is NULL, save the breakpoint address as a linespec location
instead of an address string.
(create_breakpoint_sal): Change `addr_string' parameter to a struct
event_location. All uses updated.
(create_breakpoints_sal): Likewise for local variable `addr_string'.
(parse_breakpoint_sals): Use locations instead of address strings.
Remove check for empty linespec with conditional.
Refactor.
(decode_static_tracepoint_spec): Make argument const and update
function.
(create_breakpoint): Change `arg' to a struct event_location and
rename.
Remove `copy_arg' and `addr_start'.
If EXTRA_STRING is empty, set it to NULL.
Don't populate `canonical' for pending breakpoints.
Pass `extra_string' to find_condition_and_thread.
Clear `extra_string' if `rest' was NULL.
Do not error with "garbage after location" if setting a dprintf
breakpoint.
Copy the location into the breakpoint instead of an address string.
(break_command_1): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Check against `arg_cp' for a probe linespec.
(dprintf_command): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Throw an exception if no format string was specified.
(print_recreate_ranged_breakpoint): Use event_location_to_string
instead of address strings.
(break_range_command, until_break_command)
(init_ada_exception_breakpoint): Use locations instead
of address strings.
(say_where): Print out extra_string for pending locations.
(base_breakpoint_dtor): Delete `location' and `location_range_end' of
the breakpoint.
(base_breakpoint_create_sals_from_location): Use struct event_location
instead of address string.
Remove `addr_start' and `copy_arg' parameters.
(base_breakpoint_decode_location): Use struct event_location instead of
address string.
(bkpt_re_set): Use locations instead of address strings.
Use event_location_empty_p to check for unset location.
(bkpt_print_recreate): Use event_location_to_string instead of
an address string.
Print out extra_string for pending locations.
(bkpt_create_sals_from_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location): Use struct event_location
instead of address string.
(bkpt_probe_decode_location): Use struct event_location instead of
address string.
(tracepoint_print_recreate): Use event_location_to_string to
recreate the tracepoint.
(tracepoint_create_sals_from_location, tracepoint_decode_location)
(tracepoint_probe_create_sals_from_location)
(tracepoint_probe_decode_location): Use struct event_location
instead of address string.
(dprintf_print_recreate): Use event_location_to_string to recreate
the dprintf.
(dprintf_re_set): Remove check for valid/missing format string.
(strace_marker_create_sals_from_location)
(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
(update_static_tracepoint): Use struct event_location instead of
address string.
(location_to_sals): Likewise.
Pass `extra_string' to find_condition_and_thread.
For newly resolved pending breakpoint locations, clear the location's
string representation.
Assert that the breakpoint's condition string is NULL when
condition_not_parsed.
(breakpoint_re_set_default, create_sals_from_location_default)
(decode_location_default, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Use locations
instead of address strings.
* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
Use struct event_location instead of address string.
Update all uses.
<decode_location>: Likewise.
(struct breakpoint) <addr_string>: Change to struct event_location
and rename `location'.
<addr_string_range_end>: Change to struct event_location and rename
`location_range_end'.
(create_breakpoint): Use struct event_location instead of address
string.
* cli/cli-cmds.c: Include location.h.
(edit_command, list_command): Use locations instead of address strings.
* elfread.c: Include location.h.
(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
* guile/scm-breakpoint.c: Include location.h.
(bpscm_print_breakpoint_smob): Use event_location_to_string.
(gdbscm_register_breakpoint): Use locations instead of address
strings.
* linespec.c: Include location.h.
(struct ls_parser) <stream>: Change to const char *.
(PARSER_STREAM): Update.
(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
keywords must be followed by whitespace.
(canonicalize_linespec): Save a linespec location into `canonical'.
Save a canonical linespec into `canonical'.
(parse_linespec): Change `argptr' to const char * and rename `arg'.
All uses updated.
Update function description.
(linespec_parser_new): Initialize `parser'.
Update initialization of parsing stream.
(event_location_to_sals): New function.
(decode_line_full): Change `argptr' to a struct event_location and
rename it `location'.
Use locations instead of address strings.
Call event_location_to_sals instead of parse_linespec.
(decode_line_1): Likewise.
(decode_line_with_current_source, decode_line_with_last_displayed)
Use locations instead of address strings.
(decode_objc): Likewise.
Change `argptr' to const char * and rename `arg'.
(destroy_linespec_result): Delete the linespec result's location
instead of freeing the address string.
* linespec.h (struct linespec_result) <addr_string>: Change to
struct event_location and rename to ...
<location>: ... this.
(decode_line_1, decode_line_full): Change `argptr' to struct
event_location. All callers updated.
* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
(mi_cmd_break_insert_1): Use locations instead of address strings.
Throw an error if there was "garbage" at the end of the specified
linespec.
* probe.c: Include location.h.
(parse_probes): Change `argptr' to struct event_location.
Use event locations instead of address strings.
* probe.h (parse_probes): Change `argptr' to struct event_location.
* python/py-breakpoint.c: Include location.h.
(bppy_get_location): Constify local variable `str'.
Use event_location_to_string.
(bppy_init): Use locations instead of address strings.
* python/py-finishbreakpoint.c: Include location.h.
(bpfinishpy_init): Remove local variable `addr_str'.
Use locations instead of address strings.
* python/python.c: Include location.h.
(gdbpy_decode_line): Use locations instead of address strings.
* remote.c: Include location.h.
(remote_download_tracepoint): Use locations instead of address
strings.
* spu-tdep.c: Include location.h.
(spu_catch_start): Remove local variable `buf'.
Use locations instead of address strings.
* tracepoint.c: Include location.h.
(scope_info): Use locations instead of address strings.
(encode_source_string): Constify parameter `src'.
* tracepoint.h (encode_source_string): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/dprintf-pending.exp: Update dprintf "without format"
test.
Add tests for missing ",FMT" and ",".
Provide a way to access current 'scope' during the do_module_cleanup stage and
associate more data with it.
gdb/ChangeLog
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* cli/cli-script.c (execute_control_command): Update
eval_compile_command caller.
* compile/compile-object-load.c (compile_object_load): Add parameters
scope and scope_data. Set them.
* compile/compile-object-load.h (struct compile_module): Add fields
scope and scope_data.
(compile_object_load): Add parameters scope and scope_data.
* compile/compile-object-run.c (struct do_module_cleanup): Add fields
scope and scope_data.
(compile_object_run): Propagate the fields scope and scope_data.
* compile/compile.c (compile_file_command, compile_code_command):
Update eval_compile_command callers.
(eval_compile_command): Add parameter scope_data. Pass it plus scope.
* compile/compile.h (eval_compile_command): Add parameter scope_data.
* defs.h (struct command_line): Add field scope_data.
Spotted a few strings that were missing internationalization support.
gdb/ChangeLog:
* cli/cli-dump.c (srec_dump_command): Add internationalization
mark ups.
(ihex_dump_command): Likewise.
(tekhex_dump_command): Likewise.
(binary_dump_command): Likewise.
(binary_append_command): Likewise.
Extend the gdb 'dump' command to allow creating output in verilog hex
format. Add some tests to cover new functionality. As bfd does not
currently support reading in verilog hex formats the tests only cover
the 'dump' command, not the 'restore' command.
gdb/ChangeLog:
* cli/cli-dump.c (verilog_cmdlist): New variable.
(dump_verilog_memory): New function.
(dump_verilog_value): New function.
(verilog_dump_command): New function.
(_initialize_cli_dump): Add new commands to support verilog dump
format.
* NEWS: Add entry for "dump verilog".
gdb/doc/ChangeLog:
* gdb.texinfo (Dump/Restore Files): Add detail about verilog dump
format.
gdb/testsuite/ChangeLog:
* gdb.base/dump.exp: Add *.verilog files to all_files list. Add
new tests for verilog output.
Pedro Alves:
The commands that enables aren't even documented in the manual.
Judging from that, I assume that only wdb users would ever really
be using the --xdb switch.
I think it's time to drop "support" for the --xdb switch too. I
looked through the commands that that exposes, the only that looked
potentially interesting was "go", but then it's just an alias
for "tbreak+jump", which can easily be done with "define go...end".
I'd rather free up the "go" name for something potentially
more interesting (either run control, or maybe even unrelated,
e.g., for golang).
gdb/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add removed -xdb.
* breakpoint.c (command_line_is_silent): Remove xdb_commands
conditional.
(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
and lb.
* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
va.
* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
conditional.
* defs.h (xdb_commands): Remove declaration.
* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
* guile/scm-cmd.c (command_classes): Remove xdb from comment.
* infcmd.c (run_no_args_command, go_command): Remove.
(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
* infrun.c (xdb_handle_command): Remove.
(_initialize_infrun): Remove xdb_commands for lz and z.
* main.c (xdb_commands): Remove variable.
(captured_main): Remove "xdb" from long_options.
(print_gdb_help): Remove --xdb from help.
* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
* stack.c (backtrace_full_command, args_plus_locals_info)
(current_frame_command): Remove.
(_initialize_stack): Remove xdb_commands for t, T and l.
* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
* thread.c (_initialize_thread): Remove xdb_commands condition.
* tui/tui-layout.c (tui_toggle_layout_command)
(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
(_initialize_tui_layout): Remove xdb_commands for td and ts.
* tui/tui-regs.c (tui_scroll_regs_forward_command)
(tui_scroll_regs_backward_command): Remove.
(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
(_initialize_tui_win): Remove xdb_commands for U and w.
* utils.c (pagination_on_command, pagination_off_command): Remove.
(initialize_utils): Remove xdb_commands for am and sm.
gdb/doc/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Mode Options): Remove -xdb.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This normalizes some exception catch blocks that check for ex.reason
to look like this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ALL)
{
...
}
if (ex.reason < 0)
{
...
}
~~~
This is a preparation step for running a script that converts all
TRY_CATCH uses to look like this instead:
~~~
TRY
{
...
}
CATCH (ex, RETURN_MASK_ALL)
{
...
}
END_CATCH
~~~
The motivation for that change is being able to reimplent TRY/CATCH in
terms of C++ try/catch.
This commit makes it so that:
- no condition other than ex.reason < 0 is checked in the if
predicate
- there's no "else" block to check whether no exception was caught
- there's no code between the TRY_CATCH (TRY) block and the
'if (ex.reason < 0)' block (CATCH).
- the exception object is no longer referred to outside the if/catch
block. Note the local volatile exception objects that are
currently defined inside functions that use TRY_CATCH will
disappear. In cases it's more convenient to still refer to the
exception outside the catch block, a new non-volatile local is
added and copy to that object is made within the catch block.
The following patches should make this all clearer.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Normal exception handling code.
* break-catch-throw.c (check_status_exception_catchpoint)
(re_set_exception_catchpoint): Ditto.
* cli/cli-interp.c (safe_execute_command):
* cli/cli-script.c (script_from_file): Ditto.
* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
Ditto.
* compile/compile-object-run.c (compile_object_run): Ditto.
* cp-abi.c (baseclass_offset): Ditto.
* cp-valprint.c (cp_print_value): Ditto.
* exceptions.c (catch_exceptions_with_msg):
* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
* frame.c (get_frame_address_in_block_if_available): Ditto.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Ditto.
* infcmd.c (post_create_inferior): Ditto.
* linespec.c (parse_linespec, find_linespec_symbols):
* p-valprint.c (pascal_object_print_value): Ditto.
* parse.c (parse_expression_for_completion): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
* remote.c (remote_get_noisy_reply): Ditto.
* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
* solib-svr4.c (solib_svr4_r_map): Ditto.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
have empty bodies.
User-defined commands that have empty bodies weren't being shown because
the print function returned too soon. Now, it prints the command's name
before checking if it has any body at all. This also fixes the same
problem on "show user <myemptycommand>", which wasn't being printed due
to a similar reason.
gdb/Changelog:
* cli/cli-cmds.c (show_user): Use cli_user_command_p to
decide whether we display the command on "show user".
* cli/cli-script.c (show_user_1): Only verify cmdlines after
printing command name.
* cli/cli-decode.h (cli_user_command_p): Declare new function.
* cli/cli-decode.c (cli_user_command_p): Create helper function
to verify whether cmd_list_element is a user-defined command.
gdb/testsuite/Changelog:
* gdb.base/commands.exp: Add tests to verify user-defined
commands with empty bodies.
* gdb.python/py-cmd.exp: Test that we don't show user-defined
python commands in `show user command`.
* gdb.python/scm-cmd.exp: Test that we don't show user-defined
scheme commands in `show user command`.
This PR came from a Red Hat bug that was filed recently. I checked and
it still exists on HEAD, so here's a proposed fix. Although this is
marked as a Python backend bug, this is really about the completion
mechanism used by GDB. Since this code reminds me of my first attempt
to make a good noodle, it took me quite some time to fix it in a
non-intrusive way.
The problem is triggered when one registers a completion method inside a
class in a Python script, rather than registering the command using a
completer class directly. For example, consider the following script:
class MyFirstCommand(gdb.Command):
def __init__(self):
gdb.Command.__init__(self,'myfirstcommand',gdb.COMMAND_USER,gdb.COMPLETE_FILENAME)
def invoke(self,argument,from_tty):
raise gdb.GdbError('not implemented')
class MySecondCommand(gdb.Command):
def __init__(self):
gdb.Command.__init__(self,'mysecondcommand',gdb.COMMAND_USER)
def invoke(self,argument,from_tty):
raise gdb.GdbError('not implemented')
def complete(self,text,word):
return gdb.COMPLETE_FILENAME
MyFirstCommand ()
MySecondCommand ()
When one loads this into GDB and tries to complete filenames for both
myfirstcommand and mysecondcommand, she gets:
(gdb) myfirstcommand /hom<TAB>
(gdb) myfirstcommand /home/
^
...
(gdb) mysecondcommand /hom<TAB>
(gdb) mysecondcommand /home
^
(The "^" marks the final position of the cursor after the TAB).
So we see that myfirstcommand honors the COMPLETE_FILENAME class (as
specified in the command creation), but mysecondcommand does not. After
some investigation, I found that the problem lies with the set of word
break characters that is used for each case. The set should be the same
for both commands, but it is not.
During the process of deciding which type of completion should be used,
the code in gdb/completer.c:complete_line_internal analyses the command
that requested the completion and tries to determine the type of
completion wanted by checking which completion function will be called
(e.g., filename_completer for filenames, location_completer for
locations, etc.).
This all works fine for myfirstcommand, because immediately after the
command registration the Python backend already sets its completion
function to filename_completer (which then causes the
complete_line_internal function to choose the right set of word break
chars). However, for mysecondcommand, this decision is postponed to
when the completer function is evaluated, and the Python backend uses an
internal completer (called cmdpy_completer). complete_line_internal
doesn't know about this internal completer, and can't choose the right
set of word break chars in time, which then leads to a bad decision when
completing the "/hom" word.
So, after a few attempts, I decided to create another callback in
"struct cmd_list_element" that will be responsible for handling the case
when there is an unknown completer function for complete_line_internal
to work with. So far, only the Python backend uses this callback, and
only when the user provides a completer method instead of registering
the command directly with a completer class. I think this is the best
option because it not very intrusive (all the other commands will still
work normally), but especially because the whole completion code is so
messy that it would be hard to fix this without having to redesign
things.
I have regtested this on Fedora 18 x86_64, without regressions. I also
included a testcase.
gdb/ChangeLog:
2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
PR python/16699
* cli/cli-decode.c (set_cmd_completer_handle_brkchars): New
function.
(add_cmd): Set "completer_handle_brkchars" to NULL.
* cli/cli-decode.h (struct cmd_list_element)
<completer_handle_brkchars>: New field.
* command.h (completer_ftype_void): New typedef.
(set_cmd_completer_handle_brkchars): New prototype.
* completer.c (set_gdb_completion_word_break_characters): New
function.
(complete_line_internal): Call "completer_handle_brkchars"
callback from command.
* completer.h: Include "command.h".
(set_gdb_completion_word_break_characters): New prototype.
* python/py-cmd.c (cmdpy_completer_helper): New function.
(cmdpy_completer_handle_brkchars): New function.
(cmdpy_completer): Adjust to use cmdpy_completer_helper.
(cmdpy_init): Set completer_handle_brkchars to
cmdpy_completer_handle_brkchars.
gdb/testsuite/ChangeLog:
2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
PR python/16699
* gdb.python/py-completion.exp: New file.
* gdb.python/py-completion.py: Likewise.
This constifies a few functions in cli-utils -- get_number_trailer and
friends -- and then fixes the fallout.
2014-07-30 Tom Tromey <tromey@redhat.com>
* breakpoint.c (map_breakpoint_numbers): Update.
* cli/cli-utils.c (get_number_trailer): Make "pp" const. Update.
(get_number_const): New function.
(get_number): Rewrite using get_number_const.
(init_number_or_range): Make "string" const.
(number_is_in_list): Make "list" const.
* cli/cli-utils.h (get_number_const): Declare.
(struct get_number_or_range_state) <string, end_ptr>: Now const.
(init_number_or_range, number_is_in_list): Update.
* printcmd.c (map_display_numbers): Update.
* value.c (value_from_history_ref): Constify.
* value.h (value_from_history_ref): Update.
This constifies deprecate_cmd and the "replacement" field in struct
cmd_list_element.
2014-07-24 Tom Tromey <tromey@redhat.com>
* cli/cli-decode.c (deprecate_cmd): Make "replacement" const.
* cli/cli-decode.h (struct cmd_list_element) <replacement>: Now
const.
* command.h (deprecate_cmd): Update.
* maint.c (maintenance_do_deprecate): Add casts.
Simon Marchi
Pedro Alves
Joel Brobecker
Andrew Burgess
Doug Evans
Simon Marchi
Pitchumani Sivanupandi
Doug Evans
Keith Seitz
Jan Kratochvil
Gary Benson
Tom Tromey
Gabriel Krisman Bertazi
Sergio Durigan Junior