change by replacing `symbols_added' with `so_last'.
* mdebugread.c (parse_external, parse_partial_symbols): Ignore
global common symbols, they will be resolved by the runtime loader.
* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
Handle scSCommon like scCommon symbols.
ecoff_swap_rndx_in directly; use the debug_swap pointer instead.
(upgrade_type, handle_psymbol_enumerators): Likewise.
(has_opaque_xref, cross_ref): Likewise.
(elfmdebug_build_psymtabs): Call swap->read_debug_info to read
debugging information, rather than doing it here.
* mipsread.c (mipscoff_symfile_read): Call read_debug_info entry
point in ecoff_debug_swap backend structure, rather than calling
ecoff_slurp_symbolic_info directly.
of inftarg.o.
* config/m68k/tm-dpx2.h (CANNOT_STORE_REGISTER): Define to inhibit
writing of floating registers, the dpx2 kernel disallows it.
* irix5-nat.c (LM_ADDR): The loaded address of the shared library
is contained in o_praw.
* irix5-nat.c (solib_map_sections): Adjust sections by the
difference between the loaded address and the prelinked address.
* irix5-nat.c (solib_address): Use LM_ADDR for the loaded start
address.
* mdebugread.c (parse_symbol): Do not relocate stEnd/scText
symbols, their value is absolute.
* mdebugread.c (parse_partial_symbols): Handle Irix 5.2 shared
libraries fh->adr fields of zero. Relocate minimal symbol values
upon readin. Relocate non-stabs symbols upon readin.
* mdebugread.c (psymtab_to_symtab_1): Use pst->textlow for the
start address of the outermost block.
* mdebugread.c (parse_lines, parse_procedure): Pass in pst
instead of section_offsets and use relocated pst->textlow for
line number and procedure address relocations.
From gmo@MicroUnity.com (Guillermo A. Loyola):
* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
Handle SGI Irix5 stIndirect symbol type.
for stabs symtabs.
* mips-tdep.c (mips_skip_prologue): Handle prologues for functions
that have a stack frame size of 32k or larger (from Paul Flinders).
Remove #if 0'd code.
are in the .plt section.
* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): New functions for handling
stepping into -g compiled shared libraries.
* symtab.h (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): Add prototypes.
* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
Define to handle stepping into -g compiled shared libraries.
* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle
stepping into -g compiled shared libraries.
* configure.in: Add mips-*-sysv4* support.
* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
New files for MIPS SVR4 support.
* Makefile.in: Update for new mipsv4 files.
* alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use
read_next_frame_reg to obtain the frame relative stack pointer.
* mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to
obtain the frame relative stack pointer.
* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
by entering them into the minimal symbol table.
* printcmd.c (print_scalar_formatted): Do not try to unpack to
a long for float formats.
* solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
get defined in <link.h>.
* solib.c (solib_add): Add shared library sections to the section
table of the target before adding the symbols.
* partial-stab.h: Relocate static and global functions.
* dbxread.c (read_dbx_symtab): Remove unused variable
end_of_text_address. Relocate text_addr when passing it
to end_psymtab.
For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
library functions before the executable is run. Retrieve dynamic
symbols from stripped executables.
* mipsread.c (read_alphacoff_dynamic_symtab): New function.
* mipsread.c (mipscoff_symfile_read): Use it. Issue warning message
if no debugging symbols were found.
* alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered
pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
is defined.
* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define,
OSF/1 has shared libraries.
match_bitstring_literal): Guard tolower calls with isupper,
tolower on old BSD systems blindly subtracts a constant.
* dbxread.c (read_ofile_symtab): Check for __gnu_compiled_* as
well when determining the producer of the object file.
* mdebugread.c (has_opaque_xref): New function to check for
cross reference to an opaque aggregate.
* mdebugread.c (parse_symbol, parse_partial_symbols): Do not
enter typedefs to opaque aggregates into the symbol tables.
* mdebugread.c (parse_external): Remove skip_procedures argument,
it has always been 1. Remove code that handled stProc symbols,
it was never executed and was wrong, as the index of a
stProc symbol points to the local symbol table and not to the
auxiliary symbol info. Update caller.
* mdebugread.c (parse_partial_symbols): Do not enter external
stProc symbols into the partial symbol table, they are already
entered into the minimal symbol table.
* config/i386/tm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
Fix addresses of floating point registers in REGISTER_U_ADDR.
STORE_STRUCT_RETURN now handles cc and gcc conventions.
FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
signal trampoline code work.
* config/i386/xm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
Remove KDB definitions.
* symm-nat.c (store_inferior_registers): Fetch registers before
storing them to obtain valid floating point control registers.
Store fpu registers.
* symm-nat.c (print_1167_control_word): Dynix 3.1.1 defines
FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
* symm-nat.c (fetch_inferior_registers, child_xfer_memory):
Fix typos.
* symm-nat.c (child_resume): Update type of `signal' parameter.
* symm-tdep.c (I386_REGNO_TO_SYMMETRY): Moved to tm-symmetry.h.
* alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
while (0). That defeats the whole purpose of using do . . . while (0).
* mdebugread.c (parse_partial_symbols): Don't use ?: expression as
list for ADD_PSYMBOL_TO_LIST; the macro takes its address and
using a ?: expression as an lvalue is not portable.
an `indexNil' aux index, these are simply undefined types.
Remove indexNil check from caller of parse_type.
* mdebugread.c (parse_partial_symbols): Do not enter
stGlobal, scCommon symbols into the minimal symbol table, their
value is the size of the common, not its address.
Handle scInit, scFini, scPData and scXData sections.
Use minimal symbol type mst_file_* for stLabel symbols, instead of
mst_*.
Enter stProc symbols into the global_psymbols list once, not into
the static_psymbols_list.
Get rid of dummy psymtab if it is empty, to allow proper detection
of stripped executables.
* mdebugread.c (cross_ref): Allow cross references to Fortran
common blocks.
them in the pst.
* mdebugread.c (handle_psymbol_enumerators): New function to enter
the enumerators of an ecoff enum into the partial symbol table.
* mdebugread.c (parse_partial_symbols): Call it.
* symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
* symmisc.c (dump_psymtab): Fix typo, clean up output of section
offsets. Cast psymtab->read_symtab to PTR before passing it to
gdb_print_address.
* i386-tdep.c (i386_skip_prologue): Skip over instructions that
set up the global offset table pointer in pic compiled code.
* config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
error() on TYPE_CODE_FLT arguments whose size is greater than 8,
swap all other TYPE_CODE_FLT arguments as mips_push_arguments
ensures that floats are promoted to doubles before they are pushed
on the stack.
alpha and irix. The _sigtramp case has to be handled properly
in the tdep files if we have no ecoff debugging info.
* alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
without PC_REGNUM kludge.
* mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
Clean up handling of mips sigtramp frames, improve comments.
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
compiler generated tag names.
* mdebugread.c (parse_type): Handle cross references to qualified
aggregate types.
* valops.c (value_struct_elt): Improve error message if the
address of a method is requested from an object instance.
* valops.c (search_struct_method): Make name_matched non-static
to get it initialized correctly.
config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
* mdebugread.c (parse_symbol): Handle enum sh.type produced by
DEC c89.
* mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
