* genscripts.sh: Put the scripts in the ldscripts directory, not
emulations.
* configure.in (ldscripts): Make, instead of emulations.
* Makefile.in (scriptdir): Take off the "ld" part.
(install, clean, distclean): Use ldscripts, not emulations.
In tests, pass -L., not -Lemulations.
(ldmain.o): Don't pass -DSCRIPTDIR=....
* ldlang.c (lang_process): Add "ldscripts/" to the name of the
default script file.
It wasn't documented (or likely used) and wastes time.
(try_open): If EXTEN is empty, don't try it.
* ldctor.c, lderror.c, ldexp.c, ldfile.c, ldindr.c, ldlang.c,
ldlex.l, ldmain.c, ldmisc.c, ldsym.c, ldver.c, ldwarn.c,
ldwrite.c, lexsup.c, mri.c, relax.c: Replace DEFUN macro calls
with normal function declarations.
* Move *.em to emultempl/*.em. Move *.sh to emulparams/*.sh.
Move *.sc-sh to scripttempl/*.sc.
* {emultempl,emulparams,scripttempl}/README: New files.
* sh.em, st2000.em, z8ksim.em, h8300hms.em, h8500hms.em: Files
removed, replaced with generic.em.
* h8300.sh, h8500.sh, h8300.sc, h8500.sc: Renamed from
h8[35]00hms.s[ch]. Change their contents to omit the "hms".
* *.em (*_get_script): Return script name instead of script contents.
* ldlang.c (lang_process): Change caller.
* ldlex.l, ldgram.y: Recognize -m option.
Check for input files after *all* options in grammar.
* ldmain.c (main): Check for -m options. Add default directory
for -m.
* mkscript.c: File removed.
* genscripts.sh: Take two more parameters, tooldirlib and libdir,
to add to the default LIB_PATH.
Look for input files in the new subdirectories.
Create the scripts in emulations subdirectory and don't filter
them through mkscript.
* configure.in: Make the emulations subdirectory.
* Makefile.in: Account for all of the above changes.
Remove unused .SUFFIXES. Get libgcc.a path with gcc
-print-libgcc-file-name instead of $(libdir)/libgcc.a.
Put CFLAGS last in the compilation rules.
Add -I../bfd to INCLUDES so sysdep.h is found.
* ldfile.c (try_open): If opening without the extension fails,
try with the extension even if -v or -V was given.
had_script is imported (from ldgram.y), not exported.
(mips-idt-ecoff*): Added trailing '*'.
* config/mips-idtl.mt: New file; use EMUL of mipsidtl.
* mipsidtl.sh: New file; like mipsidt.sh, but little endian.
* Makefile.in (ALL_EMULATIONS): Added em_mipsidtl.o.
Conditionalize manual to maintain Cygnus, Hitachi versions in parallel.
(Texinfo conditionals are stable enough to permit this, at last!)
NOTE: @ignore'd passages from earlier versions DELETED; use CVS history
to retrieve if wanted.
gen-doc.texi, h8-doc.texi: manual configuration definitions.
Makefile.in: link config defn (`gen' by default) to configdoc.texi, included
by ld.texinfo
.Sanitize: add gen-doc.texi, h8-doc.texi
specific emulation.
* mipsidt.sh: New file; emulation for IDT MIPS board.
* Makefile.in (ALL_EMULATIONS): Added em_mipsidt.o.
(em_mipsidt.c): New target. Uses mipsidt.sh and mips.sc-sh.
* config/mips-idt.mt: New file; sets EMUL to mipsidt.
* configure.in (mips-idt-ecoff): New target; uses mips-idt.
* mips.sc-sh: New file. Ultrix, and hopefully other MIPS ECOFF
targets, linker script.
* mipslit.sh: New file. Little endian MIPS emulation.
* config/mips-lit.mt: New file. Use mipslit emulation.
* configure.in (mips-dec-ultrix*): Use target mips-lit.
* Makefile.in (ALL_EMULATIONS): Added em_mipslit.o.
(em_mipslit.c): New target. Uses mipslit.sh.
Added initial support for the z8k
* z8ksim.em, z8ksim.sc-sh, z8ksim.sh: new files
* configure.in, Makefile.in: modified to reflect above
* ldlang.c (lang_check): when linking conflicting architectures,
make the output file reflect at least one of the bad inputs.
please let me know, or plug them in yourself.
Wed Sep 9 11:52:58 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
added m68k-coff emulation mode, stolen from a29k emulation.
Almost certainly wrong, but perhaps better than sun3.
Also fixed an error message in configure.in so that it started with
'***' like the other error messages do.
Tue Aug 18 13:41:36 1992 Ian Lance Taylor (ian@cygnus.com)
* configure.in: accept all m68K family members.
* Makefile.in: always create installation directories.
rules, since these are used when building a distribution.
* Makefile.in (ldlex.c): Don't re-direct output, since that
leaves a bogus output files if it fails.
magic to converts scripts, since that is now handled
by genscripts.sh and the *.sc-sh scipt generators.
* config.h: Remove a bunch of macros defining emulations
and targets. This becomes one less file to edit when
adding emulations or targets.
* ldemul.h (struct ld_emulation_xfer_struct): Add
emulation_name and target_name fields.
* ldemul.c, ldemul.h: Define some default functions used
by most emulations (and remove from the *.em scripts).
* ldemul.c (ldemul_choose_target): Search the new
ld_emulations array using a loop (instead of a hardwired
nested if statement).
Define the ld_emulation from the automatically-geenrated
ldemul-list.h. This means you no longer have to edit ldemul.c
to add a new emulation.
* ldmain.c: Replace {GLD,LNK}960_EMULATION_NAME by
their expansions, since the former no longer exist.
* PORTING: A very rough first draft of a porting guide.
* ldmain.c: quit using exit
* *.sc: use *(COMMON) rather than [COMMON]
* ldlex.l, lexsup.c: much thinking moved from .l and put into .c,
to allow preprocessing of .l file.
* Makefile.in: New ldlex.l mangling
* ldexp.c (fold_binary): perform expressions with % and / in
integer.
* ldfile.c (open_a): open archives on VMS in a special way
* lderror.c: forgot to check in from a long while ago
i386 aout changes from Bob Kukura
* Makefile.in, config.h: added i386aout support
* configure.in: fixed /h-{myhost} typo
* ldgram.y: -MM now gives more boring map.
* ldlang.c: now does D_PAGED flag the right way.
* ldsym.c: -MM flags does the right thing.
* ldtemplate: Add (yet another) script to get for -n or -N
options. (These need different alignment than ZMAGIC files.)
* Makefile.in: Add stuff for new foo.xn scripts.
These are generated by replacing "ALIGN(0x...00)" by ".".
by default. Don't the WP_TEXT and D_PAGED flags of
output_bfd here; it's too late, so set it when output_bfd
is created (in ldlang.c). Also fix setting of EXEC_P flag
* ldlang.c (ldlang_open_output): Set output_bfd->flags here.
* ldlang.c: Remove some duplicate extern declarations.
* ldgram.y: Fixes to -N and -n options.
* Makefile.in: Recognize upper case letters in sed script
to remove assignments from script files.
* ldtemplate: Don't assukme that -N or -n options
imply use of -r script.
* mkscript.c: Tweaking to correctly handle \n and \\ in input.
* ldtemplate: Remove ldfile_add_library_path calls;
just use the SEARCH_DIR commands in the script files.
* Makefile.in: Add LIB_PATH macro, which if set is used to replace
the SEARCH_DIR commands in the scripts (using ugly sed magic).
This is primarily intended for cross-linking, where you would
place libaries in a different place than native libraries.
Also, emulations made from ldtemplate now use $(srcdir).
* ldglda29k.sc: Change SEARCH_DIR commands to a conventional
form; people can use the Makefile's LIB_PATH to override.
* ldm88k.sc: "Clean up" script, so that ldm88kUr.sc and ldm88kr.sc
can be automatically generated.
* ldemul.c, configure.in, config.h, Makefile.in:
Add support for Sony NewsOS3.
* Makefile.in: Re-do the way ldemulation scipts and structures
are done. do we only need one or two files for each emulation
target (a TARGET.sc and optionally TARGET.c, if ldtemplate
isn't suitable). This gets rid of lots of extra source files.
