manual.
(Variables): Don't mention -gdwarf-2. Link to Compilation node.
(Macros): Add a footnote.
(C): Remove paragraph about compiler options.
(C Constants): Mention wide character and string constants.
(C Plus Plus Expressions): Update compiler option advice. Mention
using declarations. Mention ADL. Remove old HP compiler
information.
gdb/
* frame.c (frame_stop_reason_string): Rewrite using
unwind_stop_reasons.def.
* frame.h (enum unwind_stop_reason): Likewise.
* python/py-frame.c (gdbpy_initialize_frames): Likewise.
(gdbpy_frame_stop_reason_string): Use new enum unwind_stop_reason
constants for bound-checking.
* unwind_stop_reasons.def: New file.
* stack.c (backtrace_command_1): Handle UNWIND_FIRST_ERROR as an alias
instead of a distinct value.
doc/
* gdb.texinfo ((Frames In Python): Document
gdb.FRAME_UNWIND_FIRST_ERROR contant.
Fix compatibility with texinfo versions older than 4.12.
* Makefile.in (MAKEINFO): Set to @MAKEINFO@.
(MAKEINFOFLAGS, MAKEINFO_EXTRA_FLAGS, MAKEINFO_CMD): New.
(MAKEHTMLFLAGS): Use MAKEINFO_CMD.
(FLAGS_TO_PASS): Add MAKEINFOFLAGS and MAKEINFO_EXTRA_FLAGS.
* configure: Regenerate.
* configure.ac (MAKEINFO): Find it, from libiberty/configure.ac.
(MAKEINFOFLAGS): Pre-set it to --split-size=5000000.
(MAKEINFO_EXTRA_FLAGS): New test for -DHAVE_MAKEINFO_CLICK.
gdb/doc/
Fix compatibility with texinfo versions older than 4.12.
* Makefile.in (MAKEINFO): Set to @MAKEINFO@.
(MAKEINFOFLAGS, MAKEINFO_EXTRA_FLAGS, MAKEINFO_CMD): New.
(MAKEHTMLFLAGS): Use MAKEINFO_CMD.
(gdb.info, gdbint.info, stabs.info, annotate.info): Use MAKEINFO_CMD.
* gdb.texinfo (Tail Call Frames): Convert @arrow{} to @click, when possible.
Make the conversion conditional on HAVE_MAKEINFO_CLICK, using variables
CALLSEQ1A, CALLSEQ1B, CALLSEQ2A and CALLSEQ2B.
Display @entry parameter values (without references).
* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New functions.
* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New declarations.
* dwarf2loc.c (dwarf2_find_location_expression): Support location list
entry record.
(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
functions.
(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
(loclist_read_variable_at_entry): New function.
(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
DW_AT_location, call dwarf_block_to_sp_offset for it.
* frame.h (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values): New declarations.
(struct frame_arg): New field entry_kind.
(read_frame_arg): New parameter entryargp.
* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
arg->entry_kind. Optionally print the `@entry' suffix.
(list_args_or_locals): New variable entryarg, initialize it.
Initialize also entry_kind of arg and entryarg. Conditionalize
list_arg_or_local for arg, add list_arg_or_local for entryarg. Call
xfree for entryarg.error.
* stack.c (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values_choices)
(print_entry_values): New variables.
(print_frame_arg): New gdb_assert for arg->entry_kind. Optionally
print the `@entry' suffix, possibly in combination for
print_entry_values_compact.
(read_frame_arg): New parameter entryargp, new variables entryval,
entryval_error and val_equal. Read in also entryargp, respect
print_entry_values, compare the values using val_equal, fill in also
argp->entry_kind (together with entryargp->entry_kind).
(print_frame_args): New variable entryarg, initialize it.
Conditionalize print_frame_arg for arg, add print_frame_arg for
entryarg. Call xfree for entryarg.error.
(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
* symtab.h (struct symbol_computed_ops): New field
read_variable_at_entry.
gdb/doc/
Display @entry parameter values (without references).
* gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call
example.
(Print Settings): New description of set print entry-values and show
print entry-values.
gdb/testsuite/
Display @entry parameter values (without references).
* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
(different, validity, invalid): New functions.
(main): Call them.
* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
stacktest, breakhere_stacktest, different, breakhere_different,
breakhere_validity and breakhere_invalid.
(entry: bt): Update for @entry.
(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
(entry_validity: *, entry_invalid: *): Many new tests.
* gdb.base/break.exp
(run until breakpoint set at small function, optimized file): Accept
also the @entry suffix.
* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
* gdb.mi/mi2-amd64-entry-value.c: New files.
* gdb.mi/mi2-amd64-entry-value.exp: New files.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
PR python/12691: Add the inferior to Python exited event
* python/py-exitedevent.c (create_exited_event_object): Add inferior
to exited_event.
* python/py-event.h (emit_exited_event): Likewise
* python/-inferior.c (python_inferior_exit): Likewise
2011-10-04 Kevin Pouget <kevin.pouget@st.com>
PR python/12691: Add the inferior to Python exited event
* gdb.python/py-events.exp: Test the inferior attribute of exited
event with a fork.
* gdb.python/py-events.py: Print inferior number on exit.
* gdb.python/py-events.c: Fork the inferior.
2011-10-04 Kevin Pouget <kevin.pouget@st.com>
PR python/12691: Add the inferior to Python exited event
* gdb.texinfo (Events In Python): Describe exited inferior attribute.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Ada Tasking Commands): New node.
(GDB/MI Miscellaneous Commands): Add `ada-task-info'
as possible feature returned by the `-list-features'
command.
* tracepoint.c (encode_actions_1): Add case for $_ret.
(validate_actionline): Check for $_ret.
(trace_dump_actions): Ditto.
* ax-gdb.h (gen_trace_for_return_address): Declare.
* ax-gdb.c: Include arch-utils.h.
(gen_trace_for_return_address): New function.
(agent_command): Add return address special case.
* amd64-tdep.c: Include ax.h and ax-gdb.h.
(amd64_gen_return_address): New function.
(amd64_init_abi): Call it.
* i386-tdep.c: Include ax.h and ax-gdb.h.
(i386_gen_return_address): New function.
(i386_init_abi): Call it.
* arch-utils.h (default_gen_return_address): Declare.
* arch-utils.c (default_gen_return_address): New function.
* gdbarch.sh (gen_return_address): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* gdb.texinfo (Tracepoint Action Lists): Document $_ret.
* gdb.trace/collection.exp: Test collection of $_ret.
Handle multiple breakpoint hits in Python interface:
* python/py-bpevent.c (create_breakpoint_event_object): Rename C/Python
variable to breakpoints.
* python/py-stopevent.c (emit_stop_event): Return a Python tuple of
bps instead of single breakpoint. Fix some space typos.
* python/py-stopevent.c (create_breakpoint_event_object): Rename
variable to breakpoints.
testsuite:
* gdb.python/py-events.exp: Set a duplicate breakpoint and check its
presence.
* gdb.python/py-events.py (breakpoint_stop_handler): Browse all the
breakpoint hits.
doc:
* gdb.texinfo (Events In Python): New function documentation:
gdb.BreakpointEvent.breakpoints. Indicate that
gdb.BreakpointEvent.breakpoint is now deprecated.
* python/lib/gdb/__init__.py: Auto-load files in command and
function directories.
* python/python.c (finish_python_initialization): Use
os.path.join.
* python/lib/gdb/command/pretty_printers.py: Self register
command.
* NEWS: Document auto-loading.
2011-08-09 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Python): Document command and function
auto-loading.
* remote.c (remote_region_ok_for_hw_watchpoint): New function.
(remote_hw_watchpoint_length_limit): New variable.
(_initialize_remote) add set,show cmds for this new variable.
* gdb.texinfo: document these new commands.
* NEWS: Mention these new commands.
* gdb.texinfo (whatis, ptype): Highlight their differences. Describe
typedefs unrolling. Extend the sample code by an inner typedef and
outer typedefs unrolling.
* macrotab.h (macro_callback_fn): Add new arguments to callback.
* macrotab.c (foreach_macro): Ditto.
(foreach_macro_in_scope): Ditto.
* macrocmd.c (print_macro_callback): New function.
(info_macro_command): Move some code to print_macro_definition.
(print_macro_definition): New function.
(print_one_macro): Add new arguments to callback.
testsuite/
* gdb.base/info-macros.c: New test sources.
* gdb.base/info-macros.exp: New tests.
docs/
* gdb.texinfo (Macros): Add info definitions and info macros commands.
Update text and cindex entries for info macro command.
