Commit graph

28 commits

Author SHA1 Message Date
Fred Fish
e8f1ad9a8b * NEWS: Make note of new record and replay feature for
remote debug sessions.
	* serial.c (gdbcmd.h): Include.
	(serial_logfile, serial_logfp, serial_reading, serial_writing):
 	Define here, for remote debug session logging.
	(serial_log_command, serial_logchar, serial_write, serial_readchar):
	New functions for remote debug session logging.
	(serial_open): Open remote debug session log file when needed.
	(serial_close): Close remote debug session log file when needed.
	(_initialize_serial): Add set/show commands for name of remote
	debug session log file.
	* serial.h (serial_readchar): Declare
	(SERIAL_READCHAR): Call serial_readchar().
	(SERIAL_WRITE): Call serial_write().
	(serial_close): Declare as extern.
	(serial_logfile, serial_logfp): Declare.
	* top.c (execute_command): Declare serial_logfp.  Log user command
	in remote debug session log if log file is open.
	* remote-array.c (array_wait): #ifdef out echo to gdb_stdout.
	(array_read_inferior_memory): Rewrite to fix memory overwrite bug.
	* remote-array.c (SREC_SIZE): Remove, duplicates define in
	monitor.h.
	* remote-array.c (hexchars, hex2mem):  Remove, unused.
	* gdbserver/low-linux.c (store_inferior_registers): Remove
	unnecessary extern declaration of registers[].
	* gdbserver/Makefile.in (all): Add gdbreplay.
	* gdbserver/gdbreplay.c: New file.
	* gdbserver/README: Give example of recording a remote
	debug session with gdb and then replaying it with gdbreplay.
1996-01-24 21:30:37 +00:00
Stu Grossman
5c8ba01776 * monitor.c (monitor_load_srec monitor_make_srec): Move all
S-record download code into srec.c.
	* srec.c srec.h:  New files.  Contain S-record loading routines
	formerly in monitor.c.
	* serial.c serial.h:  New routine just like fprintf, but uses
	serial_t instead of FILE *.
	* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
	Don't add four to saved pc (makes things match manual).  Also, fix
	bug where we didn't get pc from stack frame correctly.
	* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL):  Don't add four to
	saved pc.  Real hardware does this for you.
	* sh3-rom.c (sh3_load):  New routine.  Sets up for download then
	calls generic S-record loader.
	* config/h8300/h8300.mt, config/h8500/h8500.mt,
	config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
	Add srec.o to TDEPFILES.
1995-11-14 23:24:10 +00:00
Fred Fish
6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
Peter Schauer
bbcc95bdb1 * config/m68k/tm-m68kv4.h (DWARF_REG_TO_REGNUM): Define to
correctly map floating point registers numbers.

	* dwarfread.c (locval, new_symbol):  Handle variables that are
	optimized out.

	* mdebugread.c:  Replace all uses of builtin_type_* with
	mdebug_type_*. Define and initialize mdebug_type_*.

	* serial.h (serial_close):  Add additional argument `really_close'.
	(SERIAL_CLOSE):  Update serial_close call accordingly.
	(SERIAL_UN_FDOPEN):  Use serial_close to handle refcnt properly.
	* serial.c (serial_close):  Handle `really_close'.
	* serial.h (scb_base):  Moved to serial.c, made static.

	* valops.c (value_addr):  Don't coerce arrays.
	(typecmp):  Coerce arrays instead of calling value_addr if necessary.
1995-07-20 05:52:42 +00:00
Stu Grossman
4887063b3c * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
for `watchdog' variable.  This allows the user to put an upper
	limit on the amount of time that GDB will wait for the target to
	return from a step or continue operation.  This will primarily be
	used for the testsuite, where it is difficult to come up with a
	reasonable timeout for things like function calls, which can take
	as long as three minutes under some circumstances.  If the
	watchdog timer expires, GDB will generate an error that looks like
	`Watchdog has expired.', and will detach from the target.

	* remote-mips.c (mips_open):  Setup initial frame from target.
	Print it out so that user is told where the program is stopped
	when they attach.

	* remote-nrom.c:  Loads of cleanups.  Use serial code to open
	network connections.  Use expect() to wait for response to
	download command.

	* ser-tcp.c (tcp_open):  Retry connection if we get ECONNREFUSED.

	* serial.c serial.h (serial_open serial_fdopen serial_close):
	Allow users to open the same device multiple times.  They all get
	to share the same serial_t.  This is about the only way to have
	multiple active targets use the same device (for download and
	debug).

	* sparcl-tdep.c:  Keep #include <unistd.h> away from GO32.

	* target.c:  Add `targetdebug' variable.  If this is non-zero,
	then a special target is put at the top of the target stack which
	will cause all calls through the target vector to have their args
	and results printed out.
1995-06-08 22:42:36 +00:00
Stu Grossman
85c8b135fe * serial.h ser-go32.c ser-go32-para.c ser-mac.c ser-tcp.c
ser-unix.c:  Add SERIAL_SETSTOPBITS to set the number of stopbits
	(needed for IDP board?!?!?).
1995-03-07 09:03:37 +00:00
Jim Kingdon
3a479851ff * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
* remote-es.c: Extensive changes to update to current conventions.
1994-01-29 19:07:02 +00:00
Jim Kingdon
9db58d3ab4 * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
	to achieve the desired timeout.
	* serial.h (serial_t): Add field timeout_remaining.
1994-01-29 16:12:35 +00:00
Ian Lance Taylor
a17535c780 * serial.h (serial_fdopen): Make parameter const to match
function definition.
1993-12-06 17:18:06 +00:00
Jim Kingdon
a14a8fad36 * inflow.c: Remove unused includes of sys/param.h, etc.
* inflow.c, ser-unix.c, ser-go32.c, ser-tcp.c, serial.h,
	terminal.h: Move all the process group stuff back to inflow.c;
	that's a better place for it and fixes problems with trying to get/set
	the process group of a tty we're doing remote debugging on.
	* terminal.h: Skip the redefine crap if HAVE_TERMIOS.
1993-10-08 22:18:27 +00:00
K. Richard Pixley
b70b042d02 fix serial.h inclusion 1993-09-14 20:08:23 +00:00
K. Richard Pixley
0ac0a9f6f1 gcc lint 1993-09-08 20:57:08 +00:00
K. Richard Pixley
0e5f1b37f6 comment change 1993-08-13 21:47:01 +00:00
Jim Kingdon
704deef2c0 * serial.h, ser-{unix,go32,tcp}.c: Add flush_input and send_break.
* nindy-share/*, remote-nindy.c: Extensive hacking to make it
	conform to GDB conventions like using memcpy not bcopy, serial.h,
	etc.  This is to make it host on Solaris, AIX, etc.
	* Makefile.in: Reflect removed nindy-share files.
1993-07-28 06:45:35 +00:00
Jim Kingdon
c2e247c4ff * inftarg.c: Remove unused include of terminal.h.
* signals.h: Don't undefine signals anymore.
	* main.c: Use job_control from serial.h.
	* fork-child.c (fork_inferior): Use gdb_setpgid.
	* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
	* utils.c (quit): Use current_target->to_terminal_ours to figure
	out whether we care about lack of job control, rather than __GO32__.
	* utils.c: Include serial.h not terminal.h
	(quit): Use job_control not TIOCGPGRP.
	* terminal.h: Don't undefine TIOCGPGRP.
	* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
	* utils.c (quit): Use it.
	* serial.h: Add SERIAL_UN_FDOPEN.
	* utils.c (quit): Use it.
	* ser-unix.c: Add process group to ttystate.
	[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
	* inflow.c: Include serial.h not terminal.h.
	Use serial.h stuff to replace most of the maze of #ifdef's.
	* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
	* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
	* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
	* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
	Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
	SERIAL_SET_PROCESS_GROUP.
	* inflow.c: Use them.
	* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
	Define HAVE_TERMIOS.
	* Various: Remove all use of TIOC*_BROKEN.
1993-06-30 22:20:53 +00:00
Stu Grossman
38dc5e123f * Makefile.in: Add new file ser-tcp.c.
* defs.h (memcmp):  Add decl for memcmp to #ifndef MEM_FNS_DECLARED.
	* findvar.c (write_register):  See if we are writing back the same
	value that's already in the register.  If so, don't bother.
	* remote.c (putpkt, getpkt):  Improve handling of communication
	problems.
	* ser-go32.c:  Prototype it to death.  Update serial_ops and add
	dummy routines where appropriate.
	* ser-tcp.c:  New module to implement serial I/O via TCP
	connections.
	* ser-unix.c:  Clean up getting/setting of tty state.  Get rid of
	SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces.
	* serial.c:  Add start of support for connect command.
	(serial_open):  Distinguish between tcp and local devices.
	* serial.h (struct serial_ops):  Get rid of restore, add
	get_tty_state and set_tty_state.  Define protoypes and macros for
	this mess.
	* gdbserver/remote-utils.c:  Add tcp support.  (readchar):  Do
	some real buffering.  Handle error conditions gracefully.
	* gdbserver/remote-inflow-sparc.c:  Update to remote-inflow.c
	(Lynx), remove lots of cruft.
1993-05-29 01:33:36 +00:00
Jim Kingdon
372d09c3fd check in serial.h change that grossman made but forgot to check in 1993-05-07 04:00:42 +00:00
Stu Grossman
4febd10272 * remote.c (remote_open): Use SERIAL_OPEN instead of serial_open.
(putpkt, getpkt):  Use new return codes for SERIAL_READCHAR.
	* ser-go32.c:  Return -1 on most failures, 0 on most successes,
	and use new return codes for go32_readchar().
	* ser-unix.c:  Ditto.  Also, move error handling up to caller for
	SERIAL_SETBAUDRATE().
	* serial.c (serial_open):  Internal call, not SERIAL_OPEN to get
	to specific routine.
	(serial_close):  New routine to wrap around device close routine.
	serial.h:  Clean & document return values more clearly.
1993-04-09 22:14:04 +00:00
Stu Grossman
4e772f4426 * Makefile.in (SFILES OBS): Add serial.[co] & ser-hardwire.[co].
These implement a new serial line interface for talking to remote
	targets.
	* configure.in:  Link ser-hardwire.c to ser-unix.c for all hosts,
	EXCEPT go32, which gets ser-go32.c.
	* remote.c:  Use new serial interface.  More remote-xxx's to be
	converted later.
	* ser-bsd.c, ser-termios.c:  Removed.
	* serial.c:  New.  Implements common operations for all serial
	types.
	* ser-unix.c:  New.  Unix specific serial operations for various
	flavors of Unix (Posix, SysV, BSD).
	* serial.h:  Generic serial interface defs.
	* config/i386/go32.mh, config/i386/i386bsd.h,
	config/m68k/apollo68b.mh, config/sparc/sun4os4.mh:  Remove
	ser-bsd.o from XDEPFILES.  All the magic is now handled in
	configure.in.
1993-04-06 05:50:54 +00:00
John Gilmore
f24c159f1b Lint: * c-exp.y (parse_number): Avoid shift warning.
* serial.h (struct ttystate):  Declare empty one on DOS.
1993-03-20 08:44:42 +00:00
Steve Chamberlain
5fe932391d * command.c (shell_escape, make_command, _initialze_command):
don't create or use fork if CANT_FORK is defined.
	* serial.h, ser-go32.c: now compiles, but "the obvious problems of
	code written for the IBM PC" remain.
	* xm-go32.h: define CANT_FORK
1993-01-04 15:39:00 +00:00
Fred Fish
402dca80e7 * {ser-bsd.c, ser-termios.c} (serial_close): Pass address of
struct, not struct itself.
	* serial.h (serial_restore):  Fix prototype, takes pointer not
	struct.
1992-11-06 01:35:57 +00:00
Stu Grossman
740b7efa43 * elfread.c, mipsread.c: Include <string.h>.
* i386-stub.c:  Include "ansidecl.h" to deal with prototypes.
* serial.h:  Add prototype for serial_restore().
1992-11-04 23:31:52 +00:00
Stu Grossman
5a6242dddd * remote-hms.c, ser-go32.c, serial.h: Change from
serial_timedreadchar() to new serial_readchar().
1992-10-19 23:40:36 +00:00
Stu Grossman
ed3f6049b4 * serial.h: Fix prototye for serial_raw().
* ser-bsd.c, ser-termios.c:  Fix args for serial_open() &
serial_write() to match prototypes.
* remote-st2000.c (get_reg_name):  Make *p be const.
1992-09-09 04:09:56 +00:00
Stu Grossman
a0f9783ea7 * a68v-xdep.c (store_inferior_registers): declare as void.
* infptrace.c:  HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c:  Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
port.
* ser-termios.c:  Big cleanup, use nicer coding conventions.
* ser-bsd.c:  New module, serial stuff for BSD systems.
* serial.h:  Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h:  #define PTRACE_IN_WRONG_PLACE...
1992-09-08 22:46:08 +00:00
John Gilmore
b52373a2b1 * ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up.
* serial.h (EXFUN):  Remove all uses, convert to PARAMS.
* config/sun4os4.mh:  Include ser-termios.o.  FIXME, all .mh files
should include a ser-XXX.o module.

* dbxread.c (elfstab_build_psymtabs):  Remove DEFUN crap.
* defs.h, i960-pinsn.c, remote-hms.c:  Replace CONST with simple const.

* configure.in:  Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}:  Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}:  Remove (use identical sun4os4.*).
1992-09-02 08:51:17 +00:00
Steve Chamberlain
ae0ea72ee2 Changes to support GDB running on DOS using GO32 and H8 support
* defs.h: if xm.h doesn't define FOPEN_RB, include "fopen-same.h",
	allowing hosts with different text and binary file formats to
	work.
	* coffread.c (read_coff_symtab): changed calling convention and
	operation - now it opens its own file with FOPEN_RB rather than
	duping and fdopening the provided handle.
	* dbxread.c, cplus-dem.c: #include mangling.
	* exec.c: If O_BINARY isn't defined, set it to 0, call openp for
	binary files oring in the right bit.
	* utils.c, terminal.h, inflow.c: hackery because dos doesn't have terminals.
	* remote-hms.c: cleanup to use the new remote serial stuff
	* serial.h, ser-termios.c, ser-go32.c: newfiles to provide host
	independent remote terminal I/O.
	* remote.c: if DONT_USE_REMOTE is defined, then don't use it.
	* source.c (openp): fix off by one problem removing / - can now
	open a source file in the root directory with DOS.
	* values.c (value_as_pointer): remove bogus address bits from
	long. (unpack_long): unpack into unsigned long/short if pointer.
1992-05-13 01:12:18 +00:00