Pull out the duplicated dv_sockser_install prototype from the tconfig.in
files and put it in the one place it gets used -- sim-module.c. This is
still arguably incorrect, but it's better than the status quo where the
tconfig.in has to include header files and duplicate the dv-sockser func.
The tconfig header is meant to be simple and contain a target defines.
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
The situation here is similar to that of the other nearby (previous)
sims fixed; it fails at the dv_sockser_install declaration in
sim/m32r/tconfig.in. But, as opposed to e.g. frv, this *does* have a
definition of UART_INCHAR_ADDR et al. It's somewhat tempting to keep
sim-hardware enabled here but, I'm disabling it for the same reasons
as for frv. Unsurprisingly (as m32r seems to be the template), the
same confusing lines are in sim/m32r/Makefile.in as in
sim/frv/Makefile.in at that time, deleted in 73e76d20. Again, commit
73e76d20 (for m32r as well as for frv) attempted to move the
non-existing dv-sockser.o use to $(m32r_extra_objs) but missed that
AC_SUBST would only affect @m32r_extra_objs@ and not
$(m32r_extra_objs) per se so nothing happened. As for frv, I'm
removing the $(m32r_extra_objs) too, to avoid confusion. Make
check-sim for m32r-elf shows no regressions (5 failures; 100 expected
passes) compared to bf3d9781ec (before the recent config.in regen,
after sim-hardware mostly-enabled) and eed23bb4a1 (before the
sim-hardware mostly-enabled; 2013-03-23).
sim/m32r:
* configure.ac: Default simulator hardware to off again. Remove
dead m32r_extra_objs substitution.
* configure: Regenerate.
* Makefile.in: Remove unused frv_extra_objs.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
These sims have optional support for the dv-sockser model, so do not make
them hard failures. The Makefile made it seem like they didn't actually
support things dynamically, but a further code dive into the source and
the Makefile shows that things work out.
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
The common code has a sim_core_trans_addr() helper that only the m32r code
uses. Move the inline extern in the m32r code to the proper common header.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The device_error() takes a printf style string, so update the prototype
accordingly. The message should be const and it should use an attribute.
This fixes gcc warnings like:
sim-core.c: In function 'sim_core_map_attach':
sim-core.c:200: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:237: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c: In function 'sim_core_attach':
sim-core.c:304: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:314: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:335: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
sim-core.c:348: warning: passing argument 2 of 'device_error' discards qualifiers from pointer target type
command interpreter to use to run the input file. This is
necessary because otherwise SHELL is taken from the user's
environment, and not from the makefile that invoked this script
and the user might not be running an sh-like shell.
* cris/Makefile.in: Pass -shell parameter to genmloop.sh.
* fr30/Makefile.in: Likewise.
* frv/Makefile.in: Likewise.
* i960/Makefile.in: Likewise.
* iq2000/Makefile.in: Likewise.
* m32r/Makefile.in: Likewise.
* frv/mloop.in: Add missing start of line comment marker.
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
