(INSTALLED_LIBS): Include GDBTKLIBS.
(CLIBS): Likewise.
* configure: Rebuilt.
* configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
(GDBTKLIBS): AC_SUBST.
* configure.in (strerror): Check if function must be declared.
* acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
* gdb_string.h (strerror): Function declaration issued if
NEED_DECLARATION_STRERROR.
* configure, config.in : Files regenerated.
merged changes from Foundry (list follows by file/author):
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* ser-unix.c
- Keith Seitz <keiths@onions.cygnus.com>
(wait_for): Don't reset the timeout_remaining for CYGWIN32,
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
(hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
second, update the UI, and loop around doing this until we have hit the real
timeout or we get data or an error. This will allow the UI to stay active
while gdb is "blocked" talking to the target.
- Martin M. Hunt <hunt@cygnus.com>
(wait_for): Do reset current_timeout
because it is only used to keep track of what the
current timeout for the scb is.
* top.c
- Martin M. Hunt <hunt@cygnus.com>
(quit_confirm): Change exit message again
for GUI.
(pc_changed_hook): Add prototype.
- Tom Tromey <tromey@cygnus.com>
(quit_confirm): Added missing `else'.
(quit_confirm): Special-case message if init_ui_hook is
set.
* symtab.c
- Martin M. Hunt <hunt@cygnus.com>
(find_pc_sect_line): If no symbol information
is found, return correct pc anyway.
(find_methods): Comment out an apparently
bogus error message because it messes up Foundry.
* serial.c
- Martin M. Hunt <hunt@cygnus.com>
(_initialize_serial): Add a description of
"set remotelogbase".
* findvar.c
- Martin M. Hunt <hunt@cygnus.com>
(write_register_gen): Add call to
pc_changed_hook if the PC is being changed.
* defs.h
- Martin M. Hunt <hunt@cygnus.com>
(pc_changed_hook): Define.
* command.c
- Martin M. Hunt <hunt@cygnus.com>
(do_setshow_command): If no arguments are supplied,
don't dump core, instead print out an error message.
* breakpoint.c
- Martin M. Hunt <hunt@cygnus.com>
Make set_raw_breakpoint, set_breakpoint_count,
and breakpoint_count non-static so they are accessible from
gdbtk.c.
(enable_breakpoint): Enable breakpoint
with same disposition instead of changing all breakpoints
to donttouch.
* annotate.h
- Keith Seitz <keiths@onions.cygnus.com>
Add declarations for annotation hooks.
* annotate.c
- Keith Seitz <keiths@onions.cygnus.com>
Add hooks: annotate_starting_hook, annotate_stopped_hook,
annotate_signalled_hook, annotate_exited_hook.
(annotate_starting): If hook exists, call it instead.
(annotate_stopped): If hook exists, call it instead.
(annotate_exited): If hook exists, call it instead.
(annotate_signalled): If hook exists, call it instead.
Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
Merged changes from Foundry: list follows by author:
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
(gdbtk_cleanup): Call ide_interface_deregister_all.
(gdbtk_init): Pass event handle to cleanup.
(TclDebug): Use Tcl_Merge to construct command.
(gdbtk_init): Call ide_create_cygwin_path_command.
- Martin M. Hunt <hunt@cygnus.com>
* gdbtk.c (gdb_set_bp): Set addr_string for bp.
(gdb_get_breakpoint_info): Demangle function
names in breakpoint info.
Include "demangle.h".
(gdb_loc, gdb_listfuncs): Demangle C++
function names.
(gdb_set_bp): Properly quote filename to fix
problems with spaces. Send pc back as a hex string.
(gdb_listfuncs): Remove debugging line.
Turn off some debugging lines.
(breakpoint_notify): Return correct line number.
(gdb_get_breakpoint_info): Return correct line number.
(gdb_set_bp): New function to provide a better way to
set breakpoints.
(gdbtk_readline, gdbtk_readline_begin): Memory
allocated by tcl needs to be freed by Tcl_Free().
(find_file_in_dir): Deleted.
(gdb_find_file_command): Call full_lookup_symtab().
(gdb_listfuncs): Call full_lookup_symtab().
(full_lookup_symtab): New function. Like lookup_symtab
except handles multiple files with the same basename,
full pathnames, and always sets symtab->fullname.
(gdb_loadfile): Call full_lookup_symtab(). Clear
realloc'd memory.
(gdb_loadfile): Don't tag lines without source.
Tag source lines with source_tag.
(gdb_find_file_command, find_file_in_dir):
Rewrite. Now searches symtabs and psymtabs for a match
on the partial or full filename. Returns the full pathname.
(gdb_loadfile): Realloc additional memory
if someone loads in a file with more than 160,000
lines. I don't know if this really works because
I don't have enough memory to test it.
(gdb_sourcelines): Deleted.
(gdb_loadfile): New function. Takes a text widget
and loads it with the contents of a file. Marks
and tags source lines.
(pc_changed): New function.
(get_pc_register): Returns the value of
the PC to GDB.
(gdb_loc): If looking on the stack, return
real pc along with calling source line.
(gdb_loc): Return "" instead of "N/A" if
filename is not found.
(gdb_get_breakpoint_info): Same.
(get_register): For Natural mode, set format to 0.
Minor bugfixes from keiths.
(TclDebug): New function for debugging use.
(gdb_loc): Return correct PC for frames
that are not the innermost frame.
(gdb_listfiles): Rewritten to use object
API. Now takes an optional dirname which will cause
only files in that directory or its subdirectories
to be returned. Now returns basenames instead of
full pathnames.
(gdb_cmd): Set/reset load_in_progress flag.
(call_wrapper): Don't pop up dialog for errors in
downloads; just abort download.
(gdbtk_load_hash): Set return value correctly.
- Keith Seitz <keiths@onions.cygnus.com>
* gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
called by routines which might block, allowing us to update the GUI.
(gdbtk_wait): Move timer calls to annotation hooks.
(gdbtk_init): Define the annotation hooks.
(gdbtk_annotate_starting): New function for cygwin32 hosts.
(gdbtk_annotate_stopped): New function for cygwin32 hosts.
(gdbtk_annotate_exited): New function for cygwin32 hosts.
(gdbtk_annotate_signalled): New function. for cygwin32 hosts.
(gdbtk_init): Use gdbtk_print_frame_info hook.
(gdbtk_print_frame_info): New function which sets current_source_symtab
based on the given symtab and line info.
(gdb_immediate_command): New function which does
not buffer any
output. (Contrast to gdb_cmd.)
(gdb_prompt_command): New function to return gdb's prompt.
(find_file_in_dir): New functon which searches source paths
for a given filename.
(gdb_find_file): New function which returns path to given file -- uses
find_file_in_dir.
(gdbtk_init): Install "gdb_immediate", "gdb_find_file", and
"gdb_prompt"
commands into interpreter.
- Ian Lance Taylor <ian@cygnus.com>
* gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
variable.
(gdb_cmd): If __CYGWIN32__, if executing the load command, call
gdbtk_start_timer and gdbtk_stop_timer.
(call_wrapper): If __CYGWIN32__, if the timer is going, turn it
off. Clear load_in_progress.
(x_event): If load_in_progress, quit if download_cancel_ok.
(gdbtk_start_timer): Set gdbtk_timer_going.
(gdbtk_stop_timer): Clear gdbtk_timer_going.
(gdbtk_wait): Call x_event.
(gdbtk_init): Call ide_create_win_grab_command if
__CYGIN32__.
(gdb_clear_file): Clear stop_pc.
* acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
* configure.in: Ditto.
* configure: Regenerated.
Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* gdbtypes.c (check_typedef): Do not try to resolve the length of
a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
set TYPE_FLAG_TARGET_STUB as well.
Patches from Peter.
and "post_add_symbol_hook". These hooks are called before we begin reading
symbols, and after we finish.
(generic_load): Use new symbol reading hooks and get rid of compiler warning.
* gdbtk.c (gdbtk_init): Add hooks for pre- and post-symbol reading.
(gdbtk_pre_add_symbol): New function: the pre-add-symbol hook.
(gdbtk_post_add_symbol): New function: the post-add-symbol hook.
(find_file_in_dir): New function. Moved the guts of gdb_find_file_command
into here to allow its use by others.
(gdb_loc): Use find_file_in_dir to return the real path to the file
(or "N/A" if we can't find it).
* configure.in (TIX_LIB_EXT): Define new variable for those special cases
when TCL_SHLIB_SUFFIX is not enough to specify the dependency.
* configure: Regenerate.
use TCL_SHLIB_SUFFIX to specify the suffix of the library file so that
we don't expect to see "libfoo.a" instead of "libfoo.{so,sl, etc}".
* configure: Regenerate.
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered
discard the most significant 32 bits.
Use CORE_ADDR for address variables instead of long.
Add more explicit tx49 configur target.
Check/use sigaction/SA_RESTART in remote-sim.c
(gdbtk_init): move ide_initialize_paths out of IDE ifdef
* configure.in (TCL_LIBS, CONFIG_DEPS): add IDE libraries for all
builds
(CONFIG_OBS): remove tracepoint.o, which should always be included
* configure: regenerate
* Makefile.in (install-only): ALWAYS install the new gdbtk
(REMOTE_OBS): add tracepoint.o
the directory name
* Merge (lots) with foundry-971118-build
* Makefile.in (install-only): install the new gdbtk, not the old
* top.h: add declaration of get_prompt
* top.c (get_prompt): new function
* gdbtk.c (gdbtk_call_command): also run idle hooks for class_trace
commands
(gdbtk_init): add new commands "gdb_get_locals", "gdb_get_args",
"gdb_get_function", "gdb_get_line", "gdb_get_file",
"gdb_tracepoint_exists", "gdb_get_tracepoint_info", "gdb_actions",
and "gdb_prompt"
(gdb_get_vars_command): new function
(gdb_get_line_command): new function
(gdb_get_file_command): new function
(gdb_get_function_command): new function
(gdb_get_tracepoint_info): new function
(gdbtk_create_tracepoint): new function
(gdbtk_delete_tracepoint): new function
(tracepoint_notify): new function
(tracepoint_exists): new function
(gdb_actions_command): new function
(gdb_tracepoint_exists_command): new function
(gdb_prompt_command): new function
* main.tcl: initialize gdbtk_state(readline)
* console.tcl (invoke): get realine working
(activate): add prompt argument for readline
(setprompt): add prompt argument for readline
* interface.tcl (gdbtk_tcl_readline): hack to get readline working
* lots: Merge with foundry-971118-build
* console.tcl (setprompt): get prompt from gdb
* prefs.tcl (pref_set_defaults): add tracepoint defaults
* interface.tcl (gdbtk_tcl_tracepoint): new function
* src.tcl (constructor): set default behavior of left click, make
a tracepoint dot, too
(fill_files): "new" function: ripped out of "location"
(location): use fill_files instead
(do_bp): add support for tracepoints
(bp_line): add support for tracepoints
(set_tracepoint): new function
(config_win): add "Set tracepoint here" to right-click menu
* actiondlg.tcl: new file to help with tracepoint data collection actions
* tracedlg.tcl: new file to help with tracepoints
To configure.in: make PRINTF_HAS_LONG_LONG check more pedantic; check
that SCANF_HAS_LONG_DOUBLE instead of assuming PRINTF_HAS_LONG_DOUBLE
implies it; document.
* aclocal.m4: add EXEEXT setting rule
* configure.in: call it
* configure: regenerate
* Makefile.in: pepper with EXEEXTs in appropriate places,
set SHELL = @SHELL@ for those lame hosts that don't have a /bin/sh
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
_WIN32.
(Tcl_Realloc, Tcl_Free): Likewise.
* configure.in: Check for cygwin32 environment. Define and
substitute WIN32LIBS and WIN32LDAPP. Always set configdir to
unix; setting it to win was for an old Tcl/Tk configuration
scheme.
* aclocal.m4 (CY_AC_LOAD_TKCONFIG): Substitute TK_BUILD_INCLUDES.
* Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
(WIN32LDAPP, WIN32LIBS): Define.
(CLIBS): Add $(WIN32LIBS).
(gdb): Use $(WIN32LDAPP).
* configure: Rebuild.
* Makefile.in, configure.in, aclocal.m4: Add Itcl, Tix, and
IDE configuration information.
* gdbtk.c (breakpoint_notify): Send address, linenumber and
filename when a breakpoint is set. Avoids call to bp_info.
(gdbtk_init): Call Tcl_FindExecutable(). Add code to handle
Itcl, Tix and IDE initialization.
* defs.h (init_ui_hook): Change prototype to accept one arg.
* main.c (gdb_init): Change prototype to accept one arg.
* top.c (gdb_init): Accepts one argument which it uses to
call (*init_ui_hook), which will be gdbtk_init(). This is
used for calling Tcl_FindExecutable().
* gdbtcl/breakpoint.tcl (gdbtk_tcl_breakpoint): Change to
accept variable number of args for compatibility with
cchanges in gdbtk.c.
* configure: Regenerated.
* gdbtcl/tclIndex: Regenerated.
* Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
* gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
to GDBTK_LIBRARY, which is now a path to search.
(gdb_path_conv): New function. Convert Cygwin32 pathname to
DOS-style pathname.
* aclocal.m4, configure.in: Changes for Windows builds.
* configure: Rebuilt.
* configure, configure.in: Allow gdbserver to be configured
for cross-target environments.
* gdbserver/Makefile.in: Add simulator support.
* gdbserver/configure.in: Eliminate assumption that host == target.
Simplify using gdb/configure.tgt and gdb/configure.host.
Fix other minor configuration errors.
* gdbserver/low-sparc.c: Fix compile error.
* gdbserver/remote-utils.c: Eliminate assumption that registers
and addresses are four bytes. Fix minor compile errors and warnings.
* gdbserver/server.c: Rewrite numerous instances of identical code
for starting inferior processes to call new function start_inferior.
Eliminate assumption that registers and addresses are four bytes.
* gdbserver/server.h: Add missing prototypes to eliminate compiler
warnings.
* gdbserver/low-sim.c: New file to mate gdbserver with simulators.
* config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
* config/i386/linux.mh: Eliminate gdbserver support as a first step
in moving such support from host to target makefile fragments.
* config/i386/linux.mt: Move gdbserver support here from linux.mh.
support for WinGDB. Add mswin to configdirs.
* configure.in configure: Move calls to configure.host and
configure.tgt to the top of configure.in to allow them to set
config variables before they are referenced.
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
* config.in, configure.in, configure: Check for <objlist.h>.
* configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
* cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
* dwarf2read.c: Turn warnings and recoverable errors into complaints,
add new complaints where appropriate.
gcc -Wall cleanup.
(struct line_head): Change line_base from char to int to avoid
problems with compilers whose plain char is represented by an
unsigned char.
(struct partial_die_info): Add is_declaration field.
(dwarf2_tmp_obstack): New obstack for allocating temporary storage
used during symbol reading.
(cu_header_offset): New variable for resolving relative reference
dies.
(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
New interface variables for decode_locdesc.
(struct dwarf2_pinfo): New structure for communication between
psymtab and symtab reading, passed via pst->read_symtab_private.
(dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
without line number sections.
(dwarf2_build_psymtabs_hard): Initialize temporary obstack
for symbol reading.
Allocate and initialize pst->read_symtab_private.
Relocate pst->textlow and pst->texthigh with baseaddr.
(scan_partial_symbols): Do not add DW_AT_declaration symbols
to the partial symbol table.
Add file scope enumerator symbols to the partial symbol table.
Fix typo in highpc computation.
If we didn't find a lowpc, set it to highpc to avoid complaints
from `maint check.
(add_partial_symbol): Relocate symbol values with baseaddr.
Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
minimal symbol table.
Obtain symbol values for DW_TAG_variable symbols from the location
descriptor, skip symbols with missing location desciptors.
Skip symbols for aggregate types without children.
Handle enumerator symbols.
(dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
(psymtab_to_symtab_1): Set local variables from
pst->read_symtab_private, set cu_header_offset and baseaddr.
Initialize temporary obstack for symbol reading, initialize
buildsym and add a cleanup to really_free_pendings.
Relocate highpc with baseaddr when calling end_symtab.
If the compilation is from a C file generated by language
preprocessors, do not set the symtab language if it was already
deduced by start_subfile.
Removed verbose sorting symbol table message.
(process_die): Handle DW_TAG_ptr_to_member_type and
DW_TAG_reference_type.
Use read_subroutine_type to get the function type for
DW_TAG_subprogram before calling read_func_scope.
(read_file_scope): Initialize file name to <unknown>, start_subfile
expects a non-NULL name.
If we didn't find a lowpc, set it to highpc to avoid complaints
from finish_symbol.
Relocate lowpc and highpc with baseaddr.
Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
Zero out ftypes for each new compilation unit (may be different
language or different objfile).
Accept compilation units without line number information, pass
comp_dir to decode_lines.
(read_func_scope): Initialize function name to <unknown> to avoid
core dumps when DW_AT_name is missing.
Relocate lowpc and highpc with baseaddr.
Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
Pass function type to new_symbol.
(read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
(read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
Handle DW_TAG_class_type.
Copy fields to type_obstack, release temporary storage for fields.
Don't add symbol if die is a stub die and has no children.
Handle C++ static member fields.
(read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
Copy fields to type_obstack, release temporary storage for fields.
Let new_symbol handle the symbol creation for enumerators
instead of handcrafting a symbol.
Determine signedness of enum type from enumerators.
(dwarf_read_array_type): Handle variable length arrays.
Use lookup_pointer_type instead of handcrafting a type.
Create array type only if a DW_TAG_subrange_type was found.
(read_tag_pointer_type, read_tag_reference_type):
Use lookup_pointer_type and lookup_reference_type instead
of handcrafting a type.
(read_tag_ptr_to_member_type): New function to handle
DW_TAG_ptr_to_member_type.
(read_subroutine_type): Handle parameter dies.
Use lookup_function_type instead of handcrafting a type.
(read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
(read_base_type): If the type has a name, use init_type to create
a new type instead of second guessing a fundamental type.
(read_comp_unit): Reset die reference table before building
a new one.
(dwarf2_read_section): Read section contents into psymbol_obstack.
(dwarf2_read_abbrevs): Handle unterminated abbreviations
for a compile unit gracefully.
(read_partial_die): Zero partial die before reading its info.
Handle DW_AT_declaration.
Fix typo in handling of DW_FORM_block4.
(read_full_die): Fix typo in handling of DW_FORM_block4.
(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
New routines to get signed values from a buffer.
(read_n_bytes, read_string): Allocate storage from the temporary
obstack. If the host char size permits it, return pointer
to buffer instead of allocating storage.
(set_cu_language): Handle DW_LANG_Mips_Assembler.
(dwarf_attr): Return NULL if reference die for DW_AT_specification
or DW_AT_abstract_origin die is not found.
(record_minimal_symbol): Removed, replaced with a direct call to
prim_record_minimal_symbol, it now handles saving the string itself.
(convert_locdesc): Removed, partial symtab reading now uses
decode_locdesc.
(dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
offset for the die reference.
(dwarf_decode_lines): Complain if the line section info is missing.
Use read_1_signed_byte to extract lh.line_base to avoid
problems with compilers whose plain char is represented by an
unsigned char.
Add cleanups for allocated temporary storage.
Start a subfile for the first file in the state machine.
Fix off by one problem with dirs.dirs access.
Use comp_dir when directory index is 0.
Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
(dwarf2_start_subfile): Try to keep line numbers from identical
absolute and relative file names in a common subfile.
(new_symbol): Allocate symbol and symbol name on the symbol_obstack.
Set SYMBOL_LINE from DW_AT_decl_line if present.
Set SYMBOL_TYPE from passed type if not NULL.
Change DW_TAG_variable symbol types with missing type entries
to a sensible type.
Handle optimized_out, offreg and islocal storage classes.
Add external symbols with type information whose address isn't
known as LOC_UNRESOLVED symbols.
Synthesize typedefs for C++ classes, structs, unions and enumerations.
Handle DW_TAG_enumerator symbols, complain for unrecognized
symbol tags.
(die_type): A missing DW_AT_type represents a void type.
Use dwarf2_get_ref_die_offset to get the absolute offset for
the die reference.
(die_containing_type): New function to build type from
DW_AT_containing_type attribut.
(read_type_die): Handle DW_TAG_ptr_to_member_type.
Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
(dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
fundamental type.
(create_name): Removed, symbol name allocation is now done
in new_symbol.
(dump_die): Use print_address_numeric to print a CORE_ADDR.
(dwarf2_empty_die_ref_table): New function to clear the die
reference table.
(dwarf2_get_ref_die_offset): New function to get the absolute
die offset from a die reference attribute.
(decode_locdesc): Complete rewrite using a stack, code mostly
borrowed from dwarfread.c:locval.
(dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
(dwarf_alloc_block): Allocate block on temporary obstack.
* elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
skip section name symbols and relocate all others.
(elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
* irix5-nat.c (fetch_core_registers): Handle core_reg_sect
from N32 executables. Call registers_fetched after extracting
the registers.
(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
definitions to enable support of O32 and N32 format objlists.
(struct so_list): New members offset, so_name and lmstart to
eliminate dependencies from the objlist format used.
(solib_map_sections, symbol_add_stub, solib_add,
info_sharedlibrary_command, solib_address, clear_solib): Use
so_name and LM_OFFSET.
(first_link_map_member): Rewrite to enable support of O32 and N32
format objlists.
(next_link_map_member, xfer_link_map_member): New functions to
support O32 and N32 format objlists.
(find_solib): Use first_link_map_member, next_link_map_member and
xfer_link_map_member.
(solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
host signal numbers.
* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
Pass CORE_ADDR variant to add_psymbol_to_list.
* mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
if we encounter a positive stack adjustment. Handle `move $30,$sp'.
Handle `sd reg,offset($sp)' for 32 bit ABIs.
* symmisc.c (dump_msymbols, print_partial_symbols): Use
print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
(dump_symtab): Print compilation directory if it is not NULL.
* valops.c (search_struct_field, value_struct_elt_for_reference):
Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
address of a static member.
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
markers correctly; this fixes problem on Vr5000 where all
functions in a module had the same address.
* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
Correct for pc-linux-gnu problem in config.guess.
* configure: Regenerate.
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
(HLDENV): Set to @HLDENV@.
(gdb): Prefix link command line with $(HLDENV).
* configure.in: Add support to test for --enable-shared and
generate appropriate values for HLDFLAGS and HLDENV.
* configure: Regenerated with autoconf.
PR 10489
mainsym def into the block it's used in.
* configure.in configure: Allow NATDEPFILES to be recognized in
.mh files regardless of whitespace.
* cpu32bug-rom.c (cpu32bug_cmds): Change load_response string to
keep downloads from hanging.
* remote-wiggler.c: Add support for flash upgrades.
* (wiggler_error): Fix message format. Add new error code.
* (wiggler_write_byets): Error code is hex. Report errors with
proper routine name.
* (wiggler_read_byets): Report errors with proper routine name.
* (get_packet): Add support for new flash commands.
* (wiggler_load): Call clear_symtab_users() to reset things
properly after download.
* (flash_xfer_memory bdm_update_flash_command): New funxtions to
support flash upgrades for Wiggler.
* (_initialize_remote_wiggler): Add `bdm update-flash' command.
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
* configure.in: work around host_alias configure bug.
AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL
and second by AC_CANONICAL_SYSTEM). The second clobbers the
previous setting. Circumventing by moving the second check
to before the first.
* configure: regenerated
PRINTF_HAS_LONG_LONG.
* expprint.c (dump_expression): Ditto.
* configure.in: Fix check for long long support in compiler to
use a function body, not a nested function.
* configure: Rebuild with autoconf.
* configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call
BFD_NEED_DECLARATION on malloc, realloc, and free.
* acconfig.h: Add NEED_DECLARATION_MALLOC,
NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
* configure, config.in: Rebuild.
* defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
rather than __STDC__. Only declare malloc, realloc, and free if
NEED_DECLARATION_* is defined.
C, else it's `const'.
* c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR
macro instead.
* configure configure.in defs.h: Use AC_C_CONST to figure out if
the compiler supports const. Gets rid of some cruft in defs.h.
* dwarf2read.c: <string.h> -> "gdb_string.h"
* remote-sim.c: Add prototypes. Fix call to gdbsim_kill.
* sparcl-tdep.c (download): Add prototypes to write_routine and
start_routine args.
* mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get
rid of varargs.h Include string.h.
* (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
update): Fix prototypes, fix calls.
* (update): Return value for catch_errors.
* (run_execute_command togdb_command_from_tty togdb_command):
Cleanup catching of errors from calls to execute_command. Also,
dup command string to avoid modifying const strings.
* (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead
of NULL when see if b->address isn't set.
* (bi_disable_bpt bi_enable_bpt bi_delete_all
bi_delete_breakpoint): Add arg to calls to update.
* (gui_command): Add prototype.
* (mswin_query): Fix prototype.
* (_initialize_gdbwin): Dup string to avoid modifying const.
* (info_path togdb_get_info_path): Remove const from decls cuz
this can't be const (it points at malloc'ed memory).
* (togdb_searchpath): Remove const from path. Dup string to
avoid modifying const strings.
* rindex -> strrchr.
* (gdbwin_list_symbols): Regexp param is const.
* Fix lots of refs to psymtabs to deref correct pointers.
* (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal,
not &sal.
* mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
toget_set_info_path): Fix prototypes to match reality.
* mswin/gui.cpp: Define _beginthreadex and _endthreadex routines
with proper prototypes.
* mswin/iface.cpp (gdbwin_fputs): Define with correct number of args.
* mswin/ser-win32s.c: Fix defs of min and max.
* mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be
USHORT.
* (WriteComm16): Change lpBug from LPVOID to LPCSTR.
* mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16.
* gdbtk.c (mainWindow): Deleted.
(cleanup_init): Don't destroy main window.
(gdbtk_init): Main window now created by Tk_Init.
* configure.in: Most X checks now handled automatically by Tk.
Use new macros to find Tcl/Tk.
* aclocal.m4: New version for new Tcl/Tk; from Don Libes.
* config.in, configure: Regenerated.
* Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
config/sparc/tm-sparclite.h: Initialize tm_print_insn from
TM_PRINT_INSN, which comes from the tm file.
* Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure, configure.in: Change test for libthread_db to only
work for configs where build/host/target are the same.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure.in (configdirs): Force 4100 builds to use 4300 GDB
target.
* configure: Rebuild.
* config/mips/vr4300el.mt (SIM_OBS): Include simulator in
little-endian builds.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
and pthread support, since pre-2.5 systems don't come with
libthread_db.so.1.
* procfs.c (info_proc): Use int instead of id_t. Old versions of
Irix don't see to define this.
* configure.in (AC_CHECK_FUNCS): Also check for sbrk.
* configure: Regenerate with autoconf.
* config.in: Regenerate with autoheader.
* main.c (main): Only use sbrk() when HAVE_SBRK is defined.
* top.c (command_loop): Ditto.
* configure.in (AC_CHECK_HEADERS): check for endian.h.
Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK.
Add host & target cases for i[345]86-*-gnu*.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
(init.c): Don't scan mig-generated files.
* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
* config/nm-m3.h (ATTACH_NO_WAIT): Define.
* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
rather than "#ifndef MACH".
* configure: Regenerate.
From: Robert Lipe <robertl@dgii.com>
Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
target is an SVR3.2 with COFF, ELF, and shared libes, but
no /proc.
* config/i386/i386sco5.mh: New file.
* config/i386/nm-i386sco5.h: New file.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
if it is actually defined.
(gdb_setpgid): Use HAVE_SETPGID.
* ch-exp.c: Change include of <string.h> to "gdb_string.h".
* c-exp.y: Ditto.
* f-exp.y: Ditto.
* m2-exp.y: Ditto.
* c-exp.y: Include <ctype.h>.
* serial.c: Ditto.
* config/m68k/nm-news.h: Add typedef for pid_t which is
apparently missing from <sys/types.h>. Enclose entire
file in NM_NEWS_H ifndef and define when included.
* config/mips/nm-news-mips.h: Ditto.
* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so.
* acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE.
* configure: Regenerate.
* valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE.
* c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE.
* configure.in: Fix have_gregset and have_fpregset autoconf
variable names so that they match the pattern required to
cache them.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
Set CONFIG_HEADERS to config.h:config.in.
The file name config.h.in can be used on DOS filesystems.
From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
* configure.in (AC_CHECK_HEADERS): Check for link.h.
* configure: Regenerate with autoconf.
* config.h.in: Regenerate with autoheader.
* config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H
is defined.
* solib.c: Exclude most of the code if HAVE_LINK_H is not defined.
* config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for
older a.out based systems.
* configure.in (AC_CONFIG_HEADER): Add, generate config.h.
* configure: Regenerate.
* Makefile.in (defs_h): Add config.h
* defs.h (config.h): Include before any other includes or defines.
* i386-tdep.c (gdb_string.h): Move include after include of defs.h.
* monitor.c (monitor_debug): Change remotedebug to buffer strings.
* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
epecting prompt and echo during open.
* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
determine if break should be sent as stop command.
* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
* i960-tdep.c (mon960_frame_chain_valid): New function for getting
stack frame on mon960.
* Makefile.in: Add mon960 files.
* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
added i960-nindy-coff* and i960-nindy-elf* for target nindy.
* configure: Regenerated.
* config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
support mon960 rom monitor on i960.
* c-exp.y (%union): Change dval to typed_val_float. Use DOUBLEST
to store actual data. Change types of INT and FLOAT tokens to
typed_val_int and typed_val_float respectively. Create new token
DOUBLE_KEYWORD to specify the string `double'. Make production
for FLOAT use type determined by parse_number. Add production for
"long double" data type.
* (parse_number): Use sscanf to parse numbers as float, double or
long double depending upon the type of typed_val_float.dval. Also
allow user to specify `f' or `l' suffix to explicitly specify
float or long double constants. Change typed_val to
typed_val_int.
* (yylex): Change typed_val to typed_val_int. Also, scan for
"double" keyword.
* coffread.c (decode_base_type): Add support for T_LNGDBL basic
type.
* configure, configure.in: Add check for long double support in
the host compiler.
* defs.h: Define DOUBLEST appropriatly depending on whether
HAVE_LONG_DOUBLE (from autoconf) is defined. Also, fix prototypes
for functions that handle this type.
* expression.h (union exp_element): doubleconst is now type
DOUBLEST.
* m2-exp.y f-exp.y (%union): dval becomes type DOUBLEST.
* findvar.c (extract_floating): Make return value be DOUBLEST.
Also, add support for numbers with size of long double.
* (store_floating): Arg `val' is now type DOUBLEST. Handle all
floating types.
* parser-defs.h parse.c (write_exp_elt_dblcst): Arg expelt is now
DOUBLEST.
* valarith.c (value_binop): Change temp variables v1, v2 and v to
type DOUBLEST. Coerce type of result to long double if either op
was of that type.
* valops.c (value_arg_coerce): If argument type is bigger than
double, coerce to long double.
* (call_function_by_hand): If REG_STRUCT_HAS_ADDR is defined, and
arg type is float and > 8 bytes, then use pointer-to-object
calling conventions.
* valprint.c (print_floating): Arg doub is now type DOUBLEST.
Use appropriate format and precision to print out floating point
values.
* value.h: Fixup prototypes for value_as_double,
value_from_double, and unpack_double to use DOUBLEST.
* values.c (record_latest_value): Remove check for invalid
floats. Allow history to store them so that people may examine
them in hex if they want.
* (value_as_double unpack_double): Change return value to DOUBLEST.
* (value_from_double): Arg `num' is now DOUBLEST.
* (using_struct_return): Use RETURN_VALUE_ON_STACK macro (target
specific) to expect certain types to always be returned on the stack.
Also check for gregset_t and fpregset_t types.
* configure: Regenerate.
* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
is defined.
(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
and HAVE_FPREGSET_T are defined. These changes allow systems
like linux that are migrating to /proc support to use a single
configuration for both new and old versions.
* config/i386/linux.mt: Note that this is now for both a.out and
ELF systems.
* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
i386v4-nat.o
* config/i386/tm-linux.h (tm-sysv4.h): Include.
* config/i386/xm-linux.h (solib.h): Include
(SVR4_SHARED_LIBS): Define.
* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined.
* configure.in, configure: Recognize rs6000-*-aix4*.
* config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h".
* config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h.
* config/rs6000/xm-aix4.h: New file.
* config/xm-aix4.h: New file.
From the Mentor work...enable configure & build on rs6000-ibm-aix4.1.*.
Note this is an unbelievably buggy debugger on this host.
that hardware watchpoint removal problems won't leave breakpoint
traps in the target.
* configure configure.in: Make --enable-gdbtk be the default.
* remote-e7000.c (e7000_insert_breakpoint,
e7000_remove_breakpoint): Use e7000 based breakpoints, not memory
breakpoints.
* (e7000_wait): Adjust PC back by two when we see a breakpoint to
compensate for e7000 maladjustment.
* sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug
which prevented hardware watchpoints from working.
* configure: Update.
* config/powerpc/macos.mh, config/powerpc/macos.mt,
config/powerpc/nm-macos.h, config/powerpc/tm-macos.h, mac-nat.c:
New files, native PowerMac debugging support.
* Makefile.in (mac-nat.o): Add build rule.
* mpw-config.in (enable_cflags): Add support.
(m68k-apple-macos, powerpc-apple-macos): Fix natdepfiles to
list object file instead of source file.
* mpw-make.sed (@ENABLE_CFLAGS@): Don't edit out, replace with
value of variable.
(install, install-only): Edit MPW-specific installation into
place of Unix shell code.
* mac-gdb.r: Fix version resources to use symbolic version strings.
(cfrg): New resource, code fragment for PowerMac.
(CC_FOR_TARGET, CXX_FOR_TARGET): Use it to find target libraries.
* configure.in (X_CFLAGS): Fix typo.
(target_subdir): Set to "${target_alias}/" if cross.
* configure.in: Regenerated.
for all mips*-*-ecoff or elf configurations.
* configure: Regenerate using autoconf 2.4.
* config/mips/{idt*.mt,tm-idt*.h}: Rename to "idt" part of the
name to "embed". Build remote-array.o along with IDT protocols.
* remote-array.c: Nuke setting the serial port to 4800 baud.
* fork-child.c (fork_inferior): Add call to
TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
control just before the new process executes it's first instruction.
* remote-mips.c (mips_initialize): Cleanup a bit. Don't try to
receive a packet at first. This speeds up initialization a lot.
Use TARGET_MONITOR_PROMPT instead of "<IDT>".
(common_breakpoint): Use rresponse instead of rerrflg to inspect
error code.
* symfile.c (syms_from_objfile reread_symbols): Call
TARGET_SYMFILE_POSTREAD to allow target specific code to get
control after reading new symbols.
* target.h: New macros TARGET_SYMFILE_POSTREAD, and
TARGET_CREATE_INFERIOR_HOOK. See above for descriptions.
* config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make
NAT_FILE point directly at ../nm-m3.h.
* config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/nm-mips.h: Improve comment at top of file.
* config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change
definition into a proper string.
start-sanitize-gm
* configure configure.in: Add support for --enable-gm.
(mips*-*-magic*): Change target from magic to idt.
* eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
* magic.c magic.h: Update files from GM.
* config/mips/magic.mt: Delete. No longer necessary now that we
use --enable mechanism.
* config/mips/tm-idt.h: Add GM stuff needed for remote GM box.
* config/mips/tm-irix5.h: Add GM stuff needed for native Irix box.
* config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all
platform specific stuff into tm-irix.h and tm-idt.h. Add defs for
TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
end-sanitize-gm
around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
* config/pa/hppahpux.mh: Remove hardcoding of X locations.
* Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
* configure.in: Link X statically on Solaris, SunOS and HPUX.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
* configure: Rebuilt.
* symtab.c (list_symbols): Add missing blank after
`<function, no debug info>' output.
* valops.c (value_assign): Handle truncation when assigning
to bitfields. Use value_copy to construct the return value
from toval.
* values.c (value_copy): Copy VALUE_FRAME and VALUE_OPTIMIZED_OUT.
of aix4 need different handling than aix3.
* configure: Updated.
* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
specific to aix4 support on the power pc.
* config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
not defined. The aix4 specific target files will do that.
* config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
specific to aix4 support on the rs6000.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
do the conversion if the pointer is not a magic aix function
pointer.
* rs6000-tdep.c: Include objfiles.h and symtab.h.
(is_magic_function_pointer): New function.
* rs6000-tdep.c (skip_prologue): Refine check for frameless
functions. Handle b .+4 emitted by aix4 compilers. Only
allow one load of a minimal toc pointer. Handle aix4 compiler's
code for alloca.
* rs6000-tdep.c (find_toc_address): Report an error if no toc was
found rather than possibly core dumping.
* partial-stab.h: Handle extra field generated by the aix4 compiler
for enumerations.
* stabsread.c (read_enum_type): Likewise.
and target.
(powerpc-*-eabi*): Don't set configdirs.
(powerpcle-*-eabi*0: Likewise.
* configure: Updated.
* rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
defined.
* config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
for powerpc running aix4.
* config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
and host include files for powerpc running aix4.
More of Mike's powerpc work + minor changes.
is bash or ksh, which handles "... $(TCL) ..." by trying to run TCL.
Changed configure.in and regenerated configure, including two lines
apparently inserted by custom cygnus version of autoconf 2.4.
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
hostfile, targetfile and nativefile. Awk is not a utility
required by the GNU coding standards. This change also
fixes the rigid whitespace requirements that were required
for awk.
* configure: regenerated.
config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
out by autoconf.
* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
* Makefile.in, configure.in: Converted to use autoconf
* aclocal.m4: New file, local autoconf macro definitions.
* configure: New file, generated with autoconf 2.3.
* Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
value of NETROM_OBS.
(NETROM_OBS): New variable.
* remote-nrom.c: New file, NetROM target support.
* config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
REMOTE_OBS instead of REMOTE_O.
start-sanitize-arc
* config/arc/arc.mt: Ditto.
end-sanitize-arc
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
and config/a29k/vx29k.mt.
* configure.in: add new configuration a29k-*-vxworks.
* remote-vx29k.c: new file merged from WRS.
* remote-vx.c: merge changes from WRS.
Add procfs support for Alpha OSF/1-2.x.
* config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
OSF/1 native support.
* config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
(MUNCH_DEFINE): Removed.
* config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
for procfs support.
* configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
release 2.x and higher, else alpha-osf1.mh, as the procfs support
in release 1.x is incomplete.
* Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
* alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
fill_fpgregset): New routines for procfs support.
* inftarg.c (_initialize_inftarg): Don't add ptrace support
if we have an optional procfs and /proc is accessible.
* procfs.c: Include sys/fault.h and sys/syscall.h before
including sys/procfs.h.
(unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
is defined, additionally perform a PIOCSSIG to really terminate
the inferior.
(create_procinfo): Always return a result.
(create_procinfo, do_attach): Don't trace T_IFAULT faults if
PROCFS_DONT_TRACE_IFAULT is defined.
(procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
argument to startup_inferior if it is defined.
(proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
of tracing exits from exec system calls. Needed for the user level
loader under Alpha OSF/1.
(do_detach): Clear any pending signal if we want to detach from
a process without a signal.
(set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
don't issue a PIOCSSIG if pr_cursig already contains the signal we
intend to set.
(info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
pending signals are numbered from 1 instead of 0.
(info_proc_mappings): Increase size of output format for addresses
if BFD_HOST_64_BIT is defined.
(procfs_stop): Renamed from child_stop.
(_initialize_procfs): Don't add procfs support if we have an
optional procfs and /proc is not accessible.
available.
* configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of
-ltcl and -ltk.
* gdbtk.c: Get rid of lots of unnecessary #includes.
* (gdbtk_init): Use ConnectionNumber macro instead of referencing
Display structure directly.
* gdbtk.tcl: Change exit button to quit button (makes shebs
happy).
<link.h>.
* i386b-nat.c: Add i386_float_info(), etc.
* config/i386/nm-nbsd.h: #define FLOAT_INFO.
* config/nm-nbsd.h: New file, for generic NetBSD native support.
* config/i386/nm-nbsd.h: Use it.
* config/sparc/nm-nbsd.h: Use it.
* config/ns32k/nm-nbsd.h: Use it.
* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
(ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/i386.
* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/ns32k.
of config/nm-trash.h.
* config/nm-trash.h: Remove.
* config/nm-empty.h: New file.
* config/i386/nm-m3.h: New file, includes config/nm-m3.h.
* config/mips/nm-m3.h: New file, includes config/nm-m3.h.
* config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/sparc/{nm,tm,xm}-nbsd.h: New files, renamed from
{nm,tm,xm}-sparcnbsd.h to conform to prefered file naming
conventions.
* configure.in: (sparc-*-netbsd): use config/sparc/nbsd.m[ht].
NLMCONV_FOR_TARGET. (SUBDIRS): Add nlm target.
* configure.in (powerpc-*-netware*): Automatically configure nlm
subdir.
* nlm/Makefile.in: Add {CC NLMCONV LD}_FOR_TARGET. Remove alpha
specific stuff. Make things more configurable.
* nlm/configure.in: Add powerpc-*-netware* target. Use
gdbserve.mt/cpu.c/cpu.h for target stuff. Get rid of tm/xm/nm.h
files.
* nlm/gdbserve.c: Move Alpha specific stuff into other files.
Remove lots of architecture-specific stuff.
* nlm/gdbserve.def: Add new imports.
* nlm/ppc.c, nlm/ppc.h: New files that contain PowerPC specific code.
* nlm/prelude.c: Don't include libhooks.h, get rid of call to
register library.
* nlm/prelude.o: What was this doing here?
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
(i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
m88*-*-mach3*, ns32k-*-mach3*): Recognize.
* Makefile.in (gdb-stop): New target.
* gdb-stop.c: New file, utility to gets attention of waiting GDBs
in Mach 3.
target.
* defs.h (enum language): Add language_asm.
* findvar.c (read_register_bytes read_register_gen
write_register_bytes read_register read_register_pid
write_register write_register_pid supply_register): Move multi-
thread handling down into these routines. Create XXX_pid routines
that allow register references to specify the pid.
* findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid
read_sp write_sp read_fp write_fp): Move these routines from
infcmd to findvar to centralize the whole mess.
* i386-nlmstub.c: Portability fixes.
* infptrace.c (child_resume): Conditionalize to allow other natives
to override it. Remove PIDGET gubbish, it's no longer necessary.
* infrun.c (wait_for_inferior): Put registers_changed() before
target_wait() to speed up remote debugging.
* Replace code that reads registers from other threads with much
nicer looking new function calls (see changes to findvar.c).
* Don't skip prologues if debugging assembly source.
* lynx-nat.c (child_resume): Lynx now needs it's own version of
child_resume to handle multi-thread debugging properly.
* remote.c: Add O response to get console output from target.
* (readchar): Add timeout parameter. Handle SERIAL_EOF and
SERIAL_ERROR here to simplify callers.
* Change static var timeout to remote_timeout.
* (fromhex): Remove unnecessary return -1 at end of routine.
* (remote_wait): Turn this into a big switch statement. Add
support for O response.
* (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR.
* (getpkt): Split getpkt into two parts. read_frame deals with
all formatting issues, run-length encoding, and framing. getpkt
now handles error recovery, and frame detection.
* ser-tcp.c (tcp_readchar): Handle EINTR from read().
* ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem
control. (hardwire_readchar): Handle EINTR from read().
* symfile.c (deduce_language_from_filename): Add support for .s
files.
* config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can
override infptrace's child_wait.
* config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h
instead of XXXlynx.h.
* config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of
tm-rs6000lynx.h.
* nlm/gdbserve.c: Portability fixes.
* Makefile.in (kdb): Remove old init.c creation commands.
* configure.in (sparclite): Match on sparclite*.
* sparclite/aload.c (main): Only change section addresses for
a.out format object files.
are in the .plt section.
* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): New functions for handling
stepping into -g compiled shared libraries.
* symtab.h (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): Add prototypes.
* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
Define to handle stepping into -g compiled shared libraries.
* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle
stepping into -g compiled shared libraries.
* configure.in: Add mips-*-sysv4* support.
* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
New files for MIPS SVR4 support.
* Makefile.in: Update for new mipsv4 files.
* alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use
read_next_frame_reg to obtain the frame relative stack pointer.
* mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to
obtain the frame relative stack pointer.
* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
by entering them into the minimal symbol table.
* printcmd.c (print_scalar_formatted): Do not try to unpack to
a long for float formats.
* solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
get defined in <link.h>.
* solib.c (solib_add): Add shared library sections to the section
table of the target before adding the symbols.
* partial-stab.h: Relocate static and global functions.
* dbxread.c (read_dbx_symtab): Remove unused variable
end_of_text_address. Relocate text_addr when passing it
to end_psymtab.
For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
library functions before the executable is run. Retrieve dynamic
symbols from stripped executables.
* mipsread.c (read_alphacoff_dynamic_symtab): New function.
* mipsread.c (mipscoff_symfile_read): Use it. Issue warning message
if no debugging symbols were found.
* alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered
pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
is defined.
* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define,
OSF/1 has shared libraries.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c
Makefile.in configure.in
Added Files:
os9kread.c os9kstab.c remote-os9k.c
* os9kread.c: New file to read os9000 style symbo table.
* os9kstab.c: new file to read os9000 style stabs.
* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
* objfiles.c (find_pc_objfile): new function to search objfile
from pc.
* objfiles.c (objfile_relocate_data): new function to relocate
data symbols in symbol table.
* objfiles.h: Add two aux fields in struct objfile to handle
multiple symbol table files situation like in os9000.
* symfile.c: Change so 'symbol-file' command can handle multiple
files. Also call target_link() to get relocation infos.
* target.c (target_link): new function to get relocation info when
a symbol file is requested to load.
* main.c (quit_command): take out 'inferior_pid != 0' condition,
because in cross mode there's no inferior pid, bit they need to
be detached.
Makefile.in: add os9kread.c os9kstab.c and .o's.
configure.in: add i386os9k target.
config/i386/i386os9k.mt: new add.
config/i386/tm-i386os9k.h: new add.
* configure.in (mips-sgi-irix5*): New host and target. Use irix5
for both.
* config/mips/irix5.mh, config/mips/irix5.mt,
config/mips/xm-irix5.h, config/mips/nm-irix5.h,
config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support.
* mdebugread.c: New file, split out of mipsread.c. Added
elfmdebug_build_psymtabs routine. Added some checks on external
symbols. Changed code to keep ecoff_debug_info and
ecoff_debug_swap structs in the psymtab and in global pointers
rather than retrieving them from the bfd. Also changed to keep
the pending list with the psymtab rather than the objfile (each
psymtab for a single objfile points to the same pending list).
* mipsread.c: Bulk of file moved into mdebugread.c, leaving just
the sym_fns.
* Makefile.in (SFILES): Added mdebugread.c.
(OBS): Added mdebugread.o.
(mdebugread.o): New target.
* symfile.h: Declare mdebug_build_psymtabs and
elfmdebug_build_psymtabs.
* elfread.c (struct elfinfo): Added mdebugsect field.
(elf_locate_sections): Remember location of .mdebug section.
(elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug
section.
* infrun.c (AT_FUNCTION_START): Set to 0 if not already defined.
(wait_for_inferior): Use AT_FUNCTION_START if it is defined to see
if PC is at the start of a function.
* mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and
give it a default definition.
(mips_skip_prologue): Skip instructions which initialize $gp
register.
(in_sigtramp): New procedure, moved in from mipsread.c.
* config/mips/tm-mips.h: Declare in_sigtramp.
* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
New files.
* config/m68k/nm-apollo68b.h: Add more defines.
* configure.in: Recognize apollo target, not just host.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
* exec.c (ignore): Return 0.
* stack.c (return_command): Fetch lazy value directly, not via
VALUE_CONTENTS, to avoid "value computed is not used".
* inflow.c (new_tty): Move osigttou inside #if.
* remote.c (remote_fetch_registers): If remote reply is short, just
note that fact and keep going (reading extra registers as all bits 0).
(remote_store_registers): Send number of registers that were found
by remote_fetch_registers.
* m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write
floating registers.
* config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
* Makefile.in, configure.in: Change accordingly.
Include sys/types.h regardless of USG.
* configure.in: Fix typo (delta88r4 -> delta88v4).
* config/m88k/xm-delta88.h: Don't include sys/siginfo.h. It was
to make this work on SVR4 before SVR4 had its own configuration,
and it breaks SVR3.
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
* Makefile.in (HFILES): Include monitor.h.
* Makefile.in: Include text that used to be in alldeps.mak.
Remove config/mips/{bigmips.mh,xm-bigmips} from it.
* Makefile.in, configure.in: Remove all traces of alldeps.mak.
* configure.in: Use them.
* alldeps.mak: List them.
* coffread.c (decode_base_type): Deal with anonymous enum type.
* i387-tdep.c (print_387_status_word): Add comment re "top".
* i386-tdep.c [I386_AIX_TARGET] (i386_extract_return_value): New func.
* dbxread.c: Use SEEK_SET and SEEK_CUR, not L_*. Define them if and
only if not defined by a header file.
* mipsread.c: Don't define L_SET or L_INCR.
host.
* sh-tdep.c (frame_find_saved_regs): Use NUM_REGS rather than hard
wired (and wrong) constant.
* values.c (unpack_long): Add case to unpack when target object is
sizeof(int).
* config/sh/tm-sh.h (REGISTER_NAMES): Know about the news ones the
simulator defines.
support it.
* config/i386/go32.mh: Define SER_HARDWIRE.
* Makefile.in: Define SER_HARDWIRE.
(DEPFILES): Use it.
(alldeps.mak): Add SER_HARDWIRE.
Remove all references to ser-hardwire.{c,o}.
* configure.in: Remove all ser_hardwire and gdb_serial_driver stuff.
own tm- & .mt files now. Also add sparclite to configdirs.
* go32-xdep.c: Dummy routines for sigsetmask & strlwr.
* config/i386/go32.mh: Nullify def of TERMCAP.
* config/i386/xm-go32.h: Get rid of redef of EIO.
* config/sparc/{sparclite.mh tm-sparclite.h}: New sparclite
specific configs. Very similar to sun4os4, but without solib.
* sparclite/{Makefile.in configure.in}: First cut at making this
dir configgable.
These implement a new serial line interface for talking to remote
targets.
* configure.in: Link ser-hardwire.c to ser-unix.c for all hosts,
EXCEPT go32, which gets ser-go32.c.
* remote.c: Use new serial interface. More remote-xxx's to be
converted later.
* ser-bsd.c, ser-termios.c: Removed.
* serial.c: New. Implements common operations for all serial
types.
* ser-unix.c: New. Unix specific serial operations for various
flavors of Unix (Posix, SysV, BSD).
* serial.h: Generic serial interface defs.
* config/i386/go32.mh, config/i386/i386bsd.h,
config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove
ser-bsd.o from XDEPFILES. All the magic is now handled in
configure.in.
m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax,
z8k}: New directories to hold cpu specific configuration files.
Naming follows gcc convention.
* config/{*.mt, *.mh}: All target and host makefile fragment
config files moved to an appropriate config/<cpu> subdirectory.
* nm-*, xm-*, tm-*: All native, host, and target files, which
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.
* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
Native, host, and target files that are common across more than
one cpu architecture and included by one of the configured
native, host, or target files, get moved to config directory.
* Makefile.in (INCLUDE_CFLAGS): Add -I${srcdir}/config to
pick up native, host, or target include files moved to one of
the config subdirectories, and that are included by other files.
* Makefile.in (alldeps.mak): Modify to account for new config
directory structure.
* alldeps.mak, depend: Update for new config directory structure.
* config/*/[ntx]m-*.h: Modify all files that include other
[ntx]m-*.h files to use path relative to gdb/config. I.E.
"a29k/tm-ultra3.h" includes "a29k/tm-29k.h" rather than just
"tm-29k.h".
* remote-eb.c (tm-29k.h): Include a29k/tm-29k.h.
* mipsread.c (tm-mips.h): Include mips/tm-mips.h.
* i860-pinsn.c (tm-i860.h): Include i860/tm-i860.h.
* configure.in: Default gdb_host_cpu to host_cpu, and remap
the ones where the default is not unique or different than the
config subdirectory name. Similarly, handle gdb_target_cpu.
Modify configure.in as appropriate to make use of gdb_host_cpu
and gdb_target_cpu to find makefile fragments and make links.
reported by mycroft@gnu.ai.mit.edu.
(Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>)
* configure.in (vax-*-ultrix2*): New triplet.
* config/vaxult2.mh: New file.
* xm-vaxult2.h: New file.
protocol.
* config/idt.mt: New file; uses remote-mips.c
* configure.in (mips-idt-ecoff): New target; uses idt.mt.
* mips-tdep.c (mips_fpu): New variable; controls use of MIPS
floating point coprocessor.
(mips_push_dummy_frame): If not mips_fpu, don't save floating
point registers.
(mips_pop_frame): If not mips_fpu, don't restore floating point
registers.
(_initialize_mips_tdep): New function; let the user reset mips_fpu
variable.
* tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): If not
mips_fpu, don't use fp0 as floating point return register.
(FIX_CALL_DUMMY): If not mips_fpu, don't save floating point
registers.
Also added remote-mips.c to .Sanitize file.
* coffread.c (decode_type): catch negative tagndx fields generated
by SCO 3.2v4 cc.
* exec.c: comment out string following #endif.
* configure.in (i[34]86-*-sco3.2v4*): use host i386sco4.
* xm-i386sco.h: include <sys/types.h> and <sys/dir.h>, required by
<sys/user.h>.
* config/i386sco4.mh: new file; like i386sco.mh, but don't require
gcc, and define const to empty to avoid SCO 3.2v4 cc bug.
