encapsulate all the steps/nexts done during self test, starting
at main, and makes them less sensitive to optimization issues.
Add "hppa*-*-hpux*" to setup_xfail for "backtrace through
signal handler" test.
* gdb.threads/pthreads.exp: Only run this for native configs.
* gdb.base/signals.exp (test_handle_all_print): Remove code that
increased timeouts, it now makes no difference.
* gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*"
setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8"
tests.
gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail
for "runto test_calls(void)" test.
"buffer_full".
* config/nind-gdb.exp (gdb_start): Use "full_buffer", not
"buffer_full".
* config/mips-gdb.exp (gdb_start): Use "full_buffer", not
"buffer_full".
* lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not
"buffer_full".
each signal's status in the output of "handle all print".
* lib/gdb.exp (gdb_test): Document that the pattern must NOT include
the \r\n sequence that immediately precedes the gdb prompt.
* gdb.base/a1-selftest.exp: Save original timeout and restore
after test.
gdb initialization, also report how long dejagnu waited. Restore
old timeout before doing error return. Temporarily increase timeout
by 3 minutes to allow for slow startups over heavy NFS use.
attempting to regenerate it. Eliminate use of a temporary file
and just generate the info file directly. Source it immediately,
for consistency of use.
* gdb.base/corefile.exp: Ditto
* gdb.base/exprs.exp: Ditto.
* gdb.base/funcargs.exp: Ditto.
* gdb.base/langs.exp: Ditto.
* gdb.base/list.exp: Ditto.
* gdb.base/mips_pro.exp: Ditto.
* gdb.base/nodebug.exp: Ditto.
* gdb.base/opaque.exp: Ditto.
* gdb.base/ptype.exp: Ditto.
* gdb.base/scope.exp: Ditto.
* gdb.base/setvar.exp: Ditto.
* gdb.base/signals.exp: Ditto.
* gdb.base/whatis.exp: Ditto.
* gdb.c++/templates.exp: Ditto.
* gdb.c++/virtfunc.exp: Ditto.
* gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
whether or not to add -lstdc++ to the compile command line args.
break.c.
* gdb.base/callfuncs.exp: Don't run these tests on the h8300.
* gdb.base/default.exp: Add h8300 xfails. Handle messages
from remote-sim.
* gdb.base/exprs.exp: Add h8300 xfails.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/ptype.exp: Likewise.
* gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300. Add
h8300 xfails.
* gdb.base/return.exp: Handle float/double precision problems
on the h8300.
* gdb.base/funcargs.c: Explicitly make last constant argument to
call_after_alloca_subr an unsigned long type.
* gdb.base/return.c: Include stdio.h.
Testsuite work for the H8/300 -gstabs. HMSE.
we always regenerate the coremaker program. Detect special case
where registers cannot be read from core file. Change setup_xfail
for "print func2:coremaker_local" and "backtrace in corefile.exp"
to fail for all i*86 targets.
* gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
* gdb.c++/templates.exp: Only match on basename of file since
some formats like xcoff don't encode directory information.
* gdb.stabs/weird.exp: Use the right sed script for powerpc
and rs6000 AIX xcoff targets.
* configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
* configure: Regenerate.
* gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
here, rather than in distclean.
defined, and use it to compile the test case with -O2. The
native compilation still uses no optimization.
* gdb.base/mips_pro.c: Remove inline assembly code since
it is compiled PIC by default, which results in assembler
warnings that make the testsuite think the compilation
was unsuccessful.
breakpoints (y or n) ". Add "mips-dec-ultrix*" to
setup_xfail for deleting all breakpoints test. Fix various
timeout messages to include "(timeout)".
* gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail
for "p t_float_values2(3.14159,float_val2)".
* gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail
for "continue to call2g" when gcc compiled.
* gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for
"up to foo in langs.exp", "show language at foo in langs.exp",
"show language at cppsub_ in langs.exp", "up to fsub in langs.exp",
and "show language at fsub in langs.exp".
* gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for
"list line 1 in include file", "list message for lines past EOF",
"list function in include file", "list list0.h:foo", and
"list filename:function; nonexistant function".
* gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for
"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
and "ptype t_char_array" to be for native cc only.
to "alpha-*-osf2*" and add comment.
* gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*"
setup_xfail for "step over execarg initialization" and
"step over corearg initialization".
* gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail
for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*".
* gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not
gcc compiled for "print coremaker_bss", "print coremaker_ro",
"print func2::coremaker_local", and "backtrace in corefile.exp".
* gdb.base/signals.exp: Build and source signals.ci.
(test_handle_all_print): Add setup_xfail for "alpha-dec-osf2*".
Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp"
to be for gcc only.
* lib/gdb.exp: Move verbose statements outside conditionals.
from dejagnu's apparent default of 10 seconds, which gives random results
when running the tests over NFS on moderately loaded systems.
* lib/gdb.exp (gdb_run_cmd): Add "(timeout)" in timeout case.
the executable, not the .o to run the tests from.
Remove a useless step and avoid loading a .o into a target board
(loads into address zero which causes all kinds of problems).
if $noresults if nonzero.
* gdb.base/langs.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
For proelf targets were we can't even tell if a process exits.
when trying to determine if a core file was generated.
If no core file was generate the first time, try again without
the ulimit -c to work around braindamaged shells.
Gets corefile.exp running again on the PA.
which sed script to run. Expect failure for v_comb test
on PA targets too.
Should get weird-stabs tests running on supported targets again.
I'd also expect most (if not all) stabs targets to fail v_comb...
* gdb.base/corefile.exp: Allow "Core was generated by ..."
messages to not include the full program name that caused
the core dump since some systems (such as solaris) apparently
truncate this path to about 80 characters.
When generating a core file first try increasing the core file
size limit to unlimited since some systems may default it to
zero, and it is harmless to try it. Move the test for failing
to generate a core file to where it will actually get executed.
* gdb.c++/templates.exp (test_ptype_of_templates): Accept
new gdb result from g++ debug info improvements and make old
pattern obsolescent. Also account for size_t differences
(may be int or long).
* gdb.base/a1-selftest.exp (test_with_self): Check for case where
initialization before function call is placed in the delay slot
and thus appears to be skipped over by commands such as "next".
"bt in signals.exp".
* gdb.base/a1-selftest.exp: Add alpha-dec-osf2 setup_xfail for
"step over execarg initialization" and
"step over corearg initialization".
* gdb.base/ptype.c (main): Declare malloc as a "char *" for systems
with sizeof(pointer) > sizeof(int). Avoid "void *" or include files.
i*86-*-linux* xfails for "backtrace through signal handler".
* gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for
"print func2::coremaker_local".
* gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4,
xfail for
"delete all breakpoints when none".
xfails when not gcc compiled for "print foo::funclocal".
(test_at_foo): Add "hppa*-*-hpux*" xfails when not gcc compiled for:
"print foo::funclocal at foo",
"print 'scope1.c'::foo::funclocal at foo",
"print foo::funclocal_bss at foo",
"print 'scope1.c'::foo::funclocal_bss at foo",
"print foo::funclocal_ro at foo",
"print 'scope1.c'::foo::funclocal_ro at foo",
"print bar::funclocal at foo" and
"print 'scope1.c'::bar::funclocal at foo".
(test_at_bar): Add "hppa*-*-hpux*" xfails when not
gcc compiled for "print foo::funclocal at bar".
Expand all messages to ensure that they identify that
the test is at bar().
* gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not
gcc compiled for:
"ptype on opaque struct pointer (statically)",
"ptype on opaque struct tagname (statically)",
"ptype on opaque struct pointer (dynamically) 1",
"ptype on opaque struct tagname (dynamically) 1",
"ptype on opaque struct pointer (dynamically) 2" and
"ptype on opaque struct tagname (dynamically) 2
* gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not
gcc compiled for:
"p datalocal"
"whatis datalocal",
"ptype datalocal",
"p bsslocal",
"whatis bsslocal", and
"ptype bsslocal".
* gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for
"backtrace in langs.exp" and "up to langs0__2do in langs.exp"
when not gcc compiled.
* gdb.base/funcargs.exp (float_and_integral_args): Add
"hppa*-*-hpux*" xfail for "run to call2a" when not gcc
compiled.
(discard_and_shuffle): Add "hppa*-*-hpux*" xfail for
"backtrace from call6a" when not gcc compiled.
(shuffle_round_robin): Add "hppa*-*-hpux*" xfail for
"backtrace from call7a" when not gcc compiled.
* gdb.base/callfuncs.exp (do_function_calls):
Add "hppa*-*-hpux*" xfail when not gcc compiled for
"p t_char_array_values(char_array_val2,char_array_val1)",
"p t_char_array_values(char_array_val1,char_array_val2)",
"p t_char_array_values("carray 1","carray 2")",
"p t_char_array_values("carray 1",char_array_val2)",
"p t_char_array_values(char_array_val1,"carray 2")",
"p sum_args(1,{2})",
"p sum_args(2,{2,3})",
"p sum_args(3,{2,3,4})",
"p sum_args(4,{2,3,4,5})"
* gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for
"backtrace in corefile.exp" when not gcc compiled.
a procedure. Accept blanks or TABs as whitespace, increase
timeout and expect input buffer size for the large output
from the command. Remove "i*86-*-bsdi2.0" xfail.
mips-sgi-irix* xfail for
"call inferior func with struct - returns char *"
and fix test so that an optional (unsigned char *) cast is
accepted in the result.
sparc-sun-solaris2* xfail for "print f1 after run to call2a".
* gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix.
* gdb.base/signals.exp: Remove duplicate "handle all print" test
that accidentally got checked in.
clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc
compiled test.
* gdb.base/opaque.exp (setup_xfail_on_opaque_pointer):
Add mips-sgi-irix5* xfail for not gcc compiled.
* gdb.base/Makefile.in (nodebug.o): Also create nodebug.ci.
* gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for
"p top", "whatis top", "p middle", and "whatis middle".
* gdb.base/whatis.exp: Add mips-sgi-irix* xfail for
"whatis signed char" for not gcc compiled.
* gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for
"set variable signed char=-1 (-1)" and
"set variable signed char=0xFF (0xFF)" for not gcc compiled.
* gdb.base/funcargs.exp (float_and_integral_args):
Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled.
Add mips-sgi-irix* xfail when not gcc compiled for
"continue to call2b".
Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for
"continue to call2g".
(discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for
"backtrace from call6a"
(shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for
"backtrace from call7k".
Add mips-sgi-irix5* xfail when not gcc compiled for
"backtrace from call7a".
(localvars_after_alloca): Fix gdb_test cmds for
"print * after runto ...".
Remove rs6000-*-* xfails for
"print i after runto localvars_after_alloca" and
"print l after runto localvars_after_alloca"
for all compilers.
* gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5),
when not compiled with gcc, for:
"print signed char == (minus)",
"print signed char != (minus)",
"print signed char < (minus)",
"print signed char > (minus)".
* gdb.base/callfuncs.exp (do_function_calls):
Add mips-sgi-irix* xfail, when compiled with native compiler, for
"call inferior func with struct - returns char *".
* gdb.base/return.exp (return_tests): Change xfail for
"correct value returned double test" to include Solaris 2.4.
* gdb.base/funcargs.exp (float_and_integral_args):
Add sparc-sun-solaris2* xfail for "print f1 after run to call2a".
* gdb.base/callfuncs.c (main): Use struct_val1 to inhibit xlc
from optimizing it away.
* gdb.base/callfuncs.exp: Remove rs6000-*-* xfails for
"call inferior func with struct".
rule that generates a .ci file for each .o file and remove
explicit .c.o rules except for callfuncs.o.
* gdb.c++/Makefile.in: Add .cc.o transformation rule that
generates a .ci file for each .o file and remove explicit
.cc.o rules.
(clean): Remove *.tmp *.ci files.
(EXECUTABLES): Remove templ-info.exp.
* gdb.base/compiler.c: New file.
* gdb.c++/compiler.cc: New file
* gdb.base/scope.exp: Source gdb.base/scope.ci.
Change rs6000-*-* xfail for
"print 'scope0.c'::filelocal_ro" and
"print 'scope1.c'::filelocal" and
"print 'scope1.c'::filelocal_bss" and
"print 'scope1.c'::filelocal_ro" and
"print 'scope1.c'::foo::funclocal" and
"print 'scope1.c'::foo::funclocal_ro" and
"print 'scope1.c'::bar::funclocal" and
"print 'scope0.c'::filelocal_ro" and
"print 'scope1.c'::filelocal at foo" and
"print 'scope1.c'::filelocal_bss at foo" and
"print 'scope1.c'::filelocal_ro at foo" and
"print 'scope1.c'::foo::funclocal at foo" and
"print 'scope1.c'::foo::funclocal_bss at foo" and
"print 'scope1.c'::foo::funclocal_ro at foo" and
"print 'scope1.c'::bar::funclocal at foo" and
"print 'scope0.c'::filelocal_ro" and
"print 'scope1.c'::filelocal" and
"print 'scope1.c'::filelocal_bss" and
"print 'scope1.c'::filelocal_ro" and
"print 'scope1.c'::foo::funclocal" and
"print 'scope1.c'::foo::funclocal_bss" and
"print 'scope1.c'::foo::funclocal_ro" and
"print 'scope1.c'::bar::funclocal" and
"print 'scope1.c'::bar::funclocal_bss"
to only be xfail'd when not compiled with gcc.
Add rs6000-*-* xfail for
"print 'scope0.c'::filelocal_bss before run"
when compiled with gcc.
(test_at_main): Add rs6000-*-* xfail for
"print filelocal_ro in test_at_main"
when compiled with gcc.
* gdb.base/ptype.exp: Source gdb.base/ptype.ci.
Add rs6000-*-aix* xfail for
"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and
"ptype t_char_array", not compiled with gcc.
* gdb.base/list.exp (test_list_function): Add rs6000-*-*
xfail for "list foo (in include file)" when gcc compiled.
* gdb.base/funcargs.exp: Source gdb.base/funcargs.ci
(integral_args): Add rs6000-*-* xfail for
"run to call0a" if not compiled with gcc.
(unsigned_integral_args): Add rs6000-*-* xfail for
"run to call1a" if not compiled with gcc.
(float_and_integral_args): Add rs6000-*-* xfail for
"run to call2a" if not compiled with gcc and for
"continue to call2b" for any compiler.
Add rs6000-*-* xfail to
"print f1 after run to call2a" for gcc compiled.
(discard_and_shuffle): Add rs6000-*-* xfail for
"run to call6a".
(shuffle_round_robin): Add rs6000-*-* xfail for
"backtrace from call7a" if not compiled with gcc.
Add rs6000-*-* xfail for
"backtrace from call7b" if compiled with gcc.
(call_after_alloca): Add rs6000-*-* xfail for
"print c in call_after_alloca" and
"print s in call_after_alloca" and
"backtrace from call_after_alloca_subr"
if not compiled with gcc.
(localvars_in_indirect_call): Add rs6000-*-* xfail for
"print c in localvars_in_indirect_call" and
"print c in localvars_in_indirect_call" and
"backtrace in indirectly called function" and
"stepping into indirectly called function"
if not compiled with gcc.
(localvars_after_alloca): Add rs6000-*-* xfail for
"print c after runto localvars_after_alloca" and
"print s after runto localvars_after_alloca" and
"print i after runto localvars_after_alloca" and
"print l after runto localvars_after_alloca"
for all compilers.
* gdb.base/whatis.exp: Source gdb.base/whatis.ci rather
than whatis-info.exp.
* gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather
than opaque-info.exp.
Setup rs6000-*-* xfail for
"ptype on opaque struct pointer (statically)" and
"ptype on opaque struct pointer (dynamically)" when
not compiled with gcc.
* gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci
rather than callf-info.exp.
(do_function_calls): Add clear_xfail for rs6000-*-* for
"p t_float_values2(3.14159,float_val2)". Seems to work
fine there, both with xlc and gcc. Need to find out what
it is doing right and fix other platforms.
* gdb.base/callfuncs.exp: Add rs6000-*-* xfail for
"call inferior func with struct - returns int",
"call inferior func with struct - returns long",
"call inferior func with struct - returns float",
"call inferior func with struct - returns double",
"call inferior func with struct - returns char *",
but only if not gcc compiled (presumes xlc compiled).
Change rs6000-*-* xfails for
"call inferior func with struct - returns char" and
" call inferior func with struct - returns short" to only
xfail if not using gcc.
(clean mostlyclean): Remove *.ci and *.tmp files.
* gdb.c++/templates.exp: Source gdb.c++/templates.ci rather
than templ-info.exp.
* gdb.base/langs.exp: Source gdb.base/langs.ci.
Add rs6000-*-* xfail for "up to foo in langs.exp"
"up to cppsub_ in langs.exp" and "up to fsub in langs.exp"
when not gcc compiled.
"backtrace through signal handler" to "i*86-*-sysv4*".
* gdb.base/signals.exp: Add xfail for "'next' behaved as
continue" case. Add "known SVR4 bug" to fail message.
Add "i*86-*-bsdi2.0" xfail for "handle all print".
Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1".
* gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for
"whatis unnamed typedef'd enum..." and "ptype t_char_array".
* gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for
"up to foo in langs.exp", "show language at foo in
langs.exp", "up to cppsub_ in langs.exp", "show
language at cppsub_ in langs.exp", "up to fsub in
langs.exp", and "show language at fsub in langs.exp".
* gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for
"bactrace in corefile.exp".
* gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for
"call inferior function with struct - returns float" and
"call inferior function with struct - returns double".
* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.
sh3e disassembler tests. Sanitized out for now.
corefile.exp from linuxaout to all linux.
* gdb.base/sigall.exp (test_one_sig): Specifically deal with
cases where we miss the breakpoint at the signal handler
for some reason. Setup xfail for linuxoldld/linuxaout and
getting SIGIO. Setup xfail for linuxoldld/linuxaout for
hitting SIGURG breakpoint.
* gdb.base/signals.exp: Setup xfail for "next" acting like
continue to add linuxoldld. Setup xfail for all linux for
"next to handler in signals_tests_1", "backtrace in
signals_tests_1", "continue to func1", "pass SIGUSR1",
and continue to handler".
inferior functions and return various types.
* gdb.base/callfuncs.c: Add functions to receive a struct
and return a member of the struct, in various types.
"call function when asleep" and "send end of file".
* gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list
for "backtrace in corefile.exp".
* gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list
for "backtrace through signal handler".
* gdb.base/corefile.exp: Make sure we actually generate a core file
before trying the core tests. Some systems allow the user to suppress
generation of core files and default to that (linux for example).
* gdb.base/signals.exp: Change xfail for "next" acting like "continue"
from "i*86-*-linux" to "i*86-*-linuxaout". Works with ELF beta.
further notice.
Looks like a bug in the lynx2.2.2 kernel scroggs the stack pointer in
these tests leading to massive failures. I've sent a nice small concise
example to Mark Rome @ lynx. Severe braindamage.
typo in setting up configdirs for native builds.
* gdb.base/return.exp: Fix typo in return double test.
* gdb.base/return.c (tmp2, tmp3): Made global to inhibit the
compiler from optimizing them away.
after the inferior gdb has started.
'cuz lynx may take a couple minutes to start the inferior gdb...
* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
after each command.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gdbvars.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.c++/demangle.exp: Likewise.
* gdb.c++/inherit.exp: Likewise.
* gdb.chill/chexp.exp: Likewise.
* gdb.fortran/exprs.exp: Likewise.
Just in case we can't get a version of expect that sets the tty modes
right on lynx to avoid this problem.
started after sending a "run" command to gdb.
(text_next_with_recursion): Don't check the output from the
program's printf statement. Instead just make sure the program
exited.
* gdb.base/{sigall.c signals.c}: Define away signal() and alarm()
for sh-hms targets, allowing these tests to link, with no other
changes. Testing is suppressed by setting "nosignals" in site.exp.
config/rom68k.exp: New tcl glue for the appropriate monitors.
These all just end up calling monitor.exp.
* config/monitor.exp (gdb_target_monitor): Handle `Connection
refused' by retrying. Cleanup some timeout issues.
* (gdb_load): Reduce timeout. Cleanup some timeout issues.
* lib/gdb.exp (gdb_test gdb_test_exact): Upvar timeout so that
callers don't have to set/restore global timeout variable.
* The following set of changes centralizes management of the global
timeout variable. This way, it can be set in one target dependent
place instead of dozens of places scattered throughout the test suite.
If you need to lengthen a timeout, then you should either set timeout
in one of the config/{target}.exp files, or multiply it by a factor.
Setting it to an absolute value is always going to lose for some
targets.
* gdb.base/a1-selftest.exp (test_with_self): Only use local timeout.
* gdb.base/callfuncs.exp (do_function_calls): Don't set timeout.
* gdb.base/funcargs.exp: Don't set timeout.
* gdb.base/list.exp (test_forward_search): Only use local timeout.
* gdb.base/printcmds.exp (test_print_string_constants
test_print_array_constants): Don't set timeout.
* gdb.base/ptype.exp: Don't set timeout.
* gdb.base/recurse.exp: Don't set timeout.
* gdb.base/return.exp: Don't set timeout.
* gdb.base/watchpoint.exp: Don't set timeout.
* gdb.c++/classes.exp (do_tests): Don't set timeout.
* gdb.c++/virtfunc.exp (test_virtual_calls): Don't set timeout.
Use targetname, serialport and baud variables instead of fixed
constants.
* config/rom68k.exp: Fix copyright and comments. Remove dead code.
* config/cpu32bug.exp: New file to support cpu32bug monitors.
* TODO: Remove item about printing variables in nodebug.exp. Add
item about enabling tests which are only run on some targets.
* gdb.base/watchpoint.exp: Various cleanups (make each test pass or
fail, make test names unique, use new gdb_test convention
regarding pattern, use gdb_test more, etc.).
short.
* gdb.base/nodebug.exp: Remove xfails for ecoff systems, they
are fixed by the recent mdebugread.c changes. Allow `short ()'
as type for top and middle.
nearly as I can tell, the whole thing was an accident in Stu's
change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant
to replace a send/expect pair with gdb_test, but ended up only
adding the gdb_test. My change of 24 Mar 1995 and Kung's change
of 30 Mar 1995 took care of it, but left this vestigial comment
which I am now nuking.
reason for skipping the warning was that configure.in sometimes
intentionally skipped building the executables but the tcl code
had no way of knowing. That (a) was always bogus with respect to
error handling, (b) is no longer true (right now there is no way
to skip C++ tests).
* gdb.c++/demangle.exp: Remove unused binfile and srcfile variables.
number (we are already testing that the correct source line text
gets printed).
* gdb.base/break.exp: Make one test if $usestubs. I'm not sure
that is what is intended, but something needed to be done to get
sunos4 native working again.
* gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).
somewhere between `read' and `main.c'. I'm pretty sure the
pattern ".*#\[0-9\].*" was slowing down pattern matching a lot,
and it isn't particularly useful.
* TODO: Remove "handle all print". Also remove item about
checking copyright date (I don't like the idea of a spurious FAIL
based on when we run the tests).
* gdb.base/a2-run.exp: Skip this file if noargs is set.
* gdb.base/break.c: Change things around so that this program
doesn't depend upon args. This is necessary to make remote
targets work (in general, they can't take args).
* gdb.base/break.exp: Don't try to send args to program. Don't
expect output. Also, replace lots of code with gdb_test.
printing of '\'' (which is what the comment says we are testing,
even though we were not), not '''.
(test_integer_literals_rejected): Test that printing ''' is an error.
* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
gdb.chill/chexp.exp, gdb.base/printcmds.exp,
gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp,
gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp:
Use gdb_test not test_print_accept.
* lib/gdb.exp: Remove test_print_accept.
unsigned char; the bug (PR 1821) is fixed.
* gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868.
* gdb.base/scope.exp (test_at_localscopes): Call pass for
successful tests--makes xfailing them work right.
only \r\n, not .*. The test can pass .* as the last thing in
$pattern if that is what it wants. In addition to providing this
flexibility, this change should speed up pattern matching in cases
where the pattern already ended with .* (there were a number of
them). This change also helps catch bad patterns--in the old
scheme the typo "char \*" instead of "char \\*" would pass. Now
it is caught.
* Many .exp files: Update callers.
"p '\'", which is the same as "p ''" once tcl gets done with
quoting, to "p '\\'", which I suspect is what is intended (one
backslash gets sent to GDB).
* gdb.base/printcmds.exp (test_artificial_arrays): New tests.
test, it causes stepping out of call_after_alloca_subr with
optimizing compilers.
(localvars_in_indirect_call): Consume GDB prompt if `finish'
fails.
* gdb.c++/misc.cc (class Contains_static_instance,
class Contains_nested_static_instance),
gdb.c++/classes.exp (test_static_members): Test printing of
a class that contains a static instance of the class.
-DNO_PROTOTYPES.
* gdb.base/callfuncs.c: Control use of prototypes based on
NO_PROTOTYPES, not __STDC.
* gdb.base/callfuncs.exp (do_function_calls): xfail one of the
t_float_values2 tests if prototypes in use.
* gdb.base/callfuncs.c (t_float_values, t_float_values2,
t_double_values): When checking differences against DELTA, check
that difference is within the range (-DELTA,DELTA), not just
(-infinity,DELTA).
remove them.
* gdb.base/nodebug.exp: Accept "function" in addition to "text
variable and "variable" in addition to "data variable".
* gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX.
2.
* gdb.base/list1.c (long_line): Add additional statement at start
of function.
* gdb.base/list.exp (test_forward_search): Update line number to
reflect new statement.
restart GDB for h8300 after a continue.
(return): Add pattern to match a29k-udi behavior.
* gdb.base/nodebug.exp: Remove obsolete comment.
* gdb.base/regs.exp: New file, testing of register displays.
* gdb.base/return.exp: Fix typo in reference to $objdir.
* gdb.base/whatis.exp: Always start with a fresh GDB.
code following the catch silently ignored some errors; without the
catch they should be thrown like any other tcl error. Also, the
catch used "" instead of {} which meant all the callers who wanted
to include one of the characters "[]$ had to quote it an extra time.
* gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp,
ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp,
demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp:
Remove extra quoting.
configuration didn't use the ".if alpha" code in weird.def.
* gdb.stabs/weird.def (v_comb): Use type attribute to specify 32
bit pointer, so the 32 bit version works even on the alpha.
* gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}:
Remove the stuff which allowed us to have separate versions for
alpha and everything else.
regexp which "info func operator\[\](" is supposed to match. Fix
string to send to GDB. Note that GDB still doesn't work right. Add a
new test for "info func .perator\[\](" which GDB does handle correctly.
gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp,
gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp,
gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff;
it makes the tests harder to understand and confuses test-o-matic.
The preferred style is that each test provides a PASS or a FAIL,
and has a unique message (e.g. "continue #54" not just "continue")
which is the same for the pass and the fail.
* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
gdb.chill/chexp.exp: Move test_print_accept and test_print_reject
to lib/gdb.exp.
* gdb.base/printcmds.exp: Use test_print_accept. Remove
prt_accept which was basically the same thing. Likewise for
test_print_reject and prt_reject.
* lib/gdb.exp (test_print_reject): Add some more error message
patterns to match from the former printcmds.exp (prt_reject).
* gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails.
One defect of the passcount stuff is that some of it failed to
report XPASS where appropriate.
* gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra
stuff before and after arg in expected pattern.
(test_paddr_operator_functions): Re-do test without print_addr_of;
this is the only test which seems to want extra stuff there.
compiler warning with dec alpha compiler.
* gdb.base/commands.exp (if_while_breakpoint_command_test): Remove
extra \n from gdb_test call (this explains why the prompt test
that I removed yesterday was there).
(user_defined_command_test): Remove extra \n and prompt test.
* gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST
doesn't exist. Likewise if SIGIO == SIGPOLL, pretend SIGPOLL
doesn't exist.
* gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL.
Also remove alpha workaround, which turns out to be because
SIGABRT == SIGLOST.
was a vestige of the manual TESTSTRATEGY, and the purpose of it
was to make sure that gdb can read a core file. But (a) the "read
the corefile" part didn't make it to a1-selftest.exp, we just
delete the corefile after creating it, and (b) we test reading
corefiles in corefile.exp anyway. Also, this test left around a
xgdb process on Solaris.
* gdb.base/corefile.exp: Also test backtrace.
when we'll be getting lots of output from gdb.
* gdb.base/a1-selftest.exp: Move code that was inside expect -re
"init_malloc" to after the expect statement. Run it if that
regexp is taken, but also for two others which happen if source
cannot be found.
* gdb.c++/templ-info.cc: New file to test for template
debugging capability of the compiler.
* gdb.c++/Makefile.in: Add rule to build templ-info.exp from
templ-info.cc.
* gdb.c++/templates.cc: Add explicit template instantiations
to enable compiling with -fno-implicit-templates. Add destructor
and 'value' method to T5 class for template tests.
* gdb.c++/templates.exp: Add testcases for printing of template
types, setting breakpoints on template methods and calling a
template method.
* config/mt-netware: New file.
* config/mt-i386-netware: Removed, separate configs for different
netware architectures are no longer needed now that we have
--with-headers.
breakpoints.
* gdb.base/bitfields.exp: restart between tests on netware targets
because breakpoints aren't relocated after target death. Run
processes to completion.
* gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd.
from optimizing them away.
* gdb.c++/classes.exp, gdb.c++/inherit.exp: Update ptype expect
patterns to include default constructors and assignment operators,
to match gcc versions beyond 2.5.8.
included file to run under newer versions of expect.
* gdb.c++/demangle.exp: Add spaces to the expect patterns between
consecutive >'s in templates to accomodate recent cplus-dem.c change.
Remove xfail for the virtual table of BDDHookV.
* Makefile.in (site.exp): Don't insert host_os, etc.
(just-check): Just use RUNTEST with RUNTESTFLAGS only.
(distclean): Check existence of subdir.
* gdb.base/configure.in (hppa*-*-hpux*): Recognize.
* gdb.base/Makefile.in: General cleanup and simplification.
Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
to build executables. Use default rule to build .o files.
(EXPECT, RUNTEST, CC): Fix relative pathname.
(site.exp): Don't insert host_os, etc.
* gdb.base/signals.c (main): Don't call signal unless SIGALRM
and/or SIGUSR1 defined.
* gdb.base/watchpoint.c: Don't include stdio.h a second time.
* gdb.c++/Makefile.in: General cleanup and simplification.
Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
(CFLAGS): Remove.
(EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname.
(which was basically just a local version of the same thing). In
addition to avoiding duplication, gdb_test_exact is faster.
* lib/gdb.exp (gdb_test_exact): Fix typo.
Reorganization of the GDB Test Suite.
* gdb.base: New directory, contains all the basic tests.
* gdb.c++: New directory, tests specific to C++.
* gdb.chill: New directory, tests specific to Chill.
* gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06,
gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13,
gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23,
gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved
into appropriate new directories (t00-t17 to base, t20-t23 to c++,
t30-31 to chill).
* */gdbme.*: Rename to match appropriate expect scripts.
* gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c,
gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c,
gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h,
gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c,
gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c,
gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c,
gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c,
gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c,
gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c,
gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files.
* gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc,
gdb.c++/virtfunc.cc: New names of C++ files.
* gdb.chill/chillvars.ch: New name of Chill file.
* gdb.base/configure.in, gdb.c++/configure.in,
gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in.
* gdb.base/Makefile.in, gdb.c++/Makefile.in,
gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in.
* configure.in (configdirs): Update to reflect directory changes.
(target_abbrev): No longer define for any configuration.
* Makefile.in: Cosmetic improvements to header comments.
