* linux-fork.c (_initialize_linux_fork): Rename "delete-fork"
command to "delete fork" (no hyphen), compatible with other
"delete" commands.
(info_forks_command): Accept a fork ID argument, for info
on a single fork. Report if no matching forks.
2006-04-26 Michael Snyder <msnyder@redhat.com>
* gdb.base/multi-forks.exp: Modify patterns for "run to exit",
which may have to consume output from other forks.
Add tests to make sure that "delete fork" succeeded.
2006-04-27 Michael Snyder <msnyder@redhat.com>
* gdb.texinfo (delete-fork): Command renamed to "delete fork".
Add support for 'target remote |' on MinGW.
* ser-mingw.c (struct pipe_state): New structure.
(make_pipe_state, free_pipe_state, cleanup_pipe_state)
(pipe_windows_open, pipe_windows_close, pipe_windows_read)
(pipe_windows_write, pipe_wait_handle): New functions.
(_initialize_ser_windows): Register a "pipe" interface based on
them.
(struct ser_console_state, struct net_windows_state): Add exit_select,
have_stopped, thread.
(pipe_select_thread, console_select_thread)
(net_windows_select_thread): Don't create a local state copy or
close stop_select. Exit on exit_select instead of stop_select. Set
have_stopped.
(console_select_thread): Don't report control keypresses as pending
input.
(pipe_select_thread): Allow stop_select to interrupt sleeping.
(set_console_wait_handle): Create exit_select and have_stopped.
Save the thread handle. Check _kbhit before starting a thread.
(ser_console_done_wait_handle): New.
(ser_console_close): Close new handles. Wait for the thread to
exit.
(new_windows_select_thread): Assert that an event occurred.
(net_windows_wait_handle): Check for pending input before starting
a thread.
(net_windows_done_wait_handle): New.
(net_windows_open): Create exit_select and have_stopped.
Save the thread handle.
(net_windows_close): Close new handles. Wait for the thread to
exit.
(_intiialize_ser_windows): Register done_wait_handle methods.
* serial.c [USE_WIN32API] (serial_done_wait_handle): New.
* serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle.
[USE_WIN32API] (serial_done_wait_handle): New prototype.
* mingw-hdep.c (gdb_select): Use serial_done_wait_handle.
* dwarf2read.c (dwarf2_start_subfile): Change prototype to accept
compilation directory as last argument.
Always pass comp_dir as second argument to start_subfile and prepend
dirname to the filename when necessary.
Remove now superfluous search for pre-existing subfile.
(dwarf_decode_lines): Pass the compilation directory to
dwarf2_start_subfile.
* 2006-03-22 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* gdb.asm/asm-source.exp: Add m32c target.
* gdb.asm/m32c.inc: Support for m32c target.
* 2006-03-22 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* configure.tgt (m32c-*-*): New entry.
* config/m32c/m32c.mt: New file.
* m32c-tdep.c: New file.
* Makefile.in (elf_m32c_h): New variable.
(m32c-tdep.o): New rule.
* NEWS: Mention new target.
* MAINTAINERS: Designate Jim Blandy as responsible maintainer.
* m32r-rom.c: On MinGW, include winsock.h instead of sys/types.h,
netdb.h, netinet/in.h.
(m32r_upload_command); Add calls WSAStartup().
* remote-m32r-sdi.c: On MinGW, include winsock.h instead of
netinet/in.h.
* gdb.texinfo (Specifying source directories): Update the description
of the source file search to reflect the fact that the source path
always contains at least $cdir and $cwd.
2006-04-11 Jim Blandy <jimb@codesourcery.com>
* serial.c (serial_open): Check for special cases at the front of
the "device" name before scanning for the ':' that would indicate
an IP-based connection.
frame sniffer.
* sparc-tdep.c (sparc32_gdbarch_init): Make sure to call
dwarf2_frame_set_init_reg() before gdbarch_init_osabi() so
that the latter can override.
* Makefile.in (sparc64-linux-tdep.o): Update dependencies.
(sparc32_linux_init_abi): Hook it into tdep->step_trap.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): New.
(sparc64_linux_init_abi): Hook it into tdep->step_trap.
* Makefile.in: Update dependencies.
gdb/
* cli/cli-script.c (struct user_args): Add command field.
(arg_cleanup): Free command string.
(setup_user_args): Copy the command line before relying on it.
gdb/testsuite/
* gdb.base/commands.exp (recursive_source_test): New test.
argument.
(dwarf2_frame_default_init_reg): Likewise.
(dwarf2_frame_set_init_reg): Update init_reg arg.
(dwarf2_frame_init_reg): Take "next_frame" and pass it to
ops->init_reg().
(dwarf2_frame_cache): Pass next_frame to dwarf2_frame_init_reg.
* dwarf2-frame.h (dwarf2-frame_set_init_reg): Update declaration.
* cris-tdep.c (cris_dwarf2_frame_init_reg): Add next_frame arg.
* s390-tdep.c (s390_dwarf2_frame_init_reg): Likewise.
* sh-tdep.c (sh_dwarf2_frame_init_reg): Likewise.
* sparc64-tdep.c (sparc64_dwarf2_frame_init_reg): Likewise.
* sparc-tdep.c (sparc32_struct_return_from_sym): New function.
(sparc32_frame_cache): Call it.
(sparc32_dwarf2_struct_return_p): New function.
(sparc_dwarf2_frame_init_reg): Use it to determine if the function
returns a structure and thus we have to indicate the return PC and
NPC are 4 bytes later than usual.
* value.h (struct internalvar): Add field 'endian'.
* value.c (lookup_internalvar): Initialise endian.
(value_of_internalvar): Flip the endian of built-in types if required.
(set_internalvar): Set the endian.
(show_convenience): Access the value through value_of_internalvar().
(check_for_thread_db): New function, split out from
thread_db_new_objfile. Remove dead check for active
thread_db on inapplicable targets.
(thread_db_new_objfile): Call check_for_thread_db.
* Makefile.in (linux-thread-db.o): Update.
* linux-nat.c (child_post_attach): Call check_for_thread_db.
(linux_child_post_startup_inferior): Likewise.
(lin_lwp_attach_lwp): Call target_post_attach instead of
child_post_attach.
* linux-nat.h (check_for_thread_db): New prototype.
(init_remote_state): Initialize the new fields.
(get_memory_packet_size): Update BUF and BUF_SIZE if necessary.
(set_thread, remote_thread_alive, remote_unpack_thread_info_response)
(remote_get_threadinfo, parse_threadlist_response)
(remote_get_threadlist, remote_current_thread, remote_threads_info)
(remote_threads_extra_info, extended_remote_restart, get_offsets)
(remote_check_symbols, remote_open_1, remote_detach)
(remove_vcont_probe, remote_vcont_resume, remote_resume)
(remote_wait, remote_async_wait, fetch_register_using_p)
(remote_fetch_registers, store_register_using_P)
(remote_store_registers, check_binary_download, remote_write_bytes)
(remote_read_bytes, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_remove_watchpoint, remote_insert_hw_breakpoint)
(remote_remove_hw_breakpoint, compare_sections_command)
(remote_xfer_partial, remote_rcmd, packet_command)
(remote_get_thread_local_address): Use the global incoming buffer
instead of alloca or xmalloc. Limit outgoing packets to
rs->remote_packet_size and incoming packets to rs->buf_size.
Update calls to getpkt and remote_send.
(remote_send): Take arguments by reference.
(putpkt_binary): Eliminate junkbuf. Use skip_frame.
(skip_frame): New function.
(read_frame): Take arguments by reference. Expand the packet
buffer instead of issuing an error.
(getpkt, getpkt_sane): Take arguments by reference.
* remote.h (getpkt): Update prototype and doc.
* tracepoint.c (remote_get_noisy_reply): Take arguments by
reference.
(target_buf): Change from array to pointer.
(target_buf_size): New variable.
(remote_set_transparent_ranges): Update call to getpkt.
(trace_start_command, trace_stop_command, trace_status_command):
Update calls to remote_get_noisy_reply.
(finish_tfind_command): Take arguments by reference.
(trace_find_command, trace_find_pc_command)
(trace_find_tracepoint_command, trace_find_line_command):
(trace_find_range_command, trace_find_outside_command): Update
calls to finish_tfind_command.
(_initialize_tracepoint): Initialize target_buf_size and target_buf.
* hppa-tdep.c (hppa_find_unwind_entry_in_block): New.
(hppa_frame_cache): Use new function to find unwind entry.
(hppa_frame_this_id): Likewise.
(hppa_frame_unwind_sniffer): Likewise.
2006-03-28 Jim Blandy <jimb@codesourcery.com>
* prologue-value.c, prologue-value.h: New files.
* Makefile.in (prologue_value_h): New variable.
(HFILES_NO_SRCDIR): List prologue-value.h.
(SFILES): List prologue-value.c.
(COMMON_OBS): List prologue-value.o.
(prologue-value.o): New rule.
src/gdb/doc/ChangeLog:
2006-03-28 Jim Blandy <jimb@codesourcery.com>
* gdbint.texinfo (Prologue Analysis): New section.
Try to deal with continuation line.
(gdbmi, gdbmi-prompt1, gud-gdbmi-marker-filter): Update to new
variable names.
(gdb-break-list-regexp, gdb-stack-list-frames-regexp):
Future proof against new fields being added to MI output.
(gdbmi-prompt2, gdb-break-list-handler,gdb-get-source-file)
(gdbmi-frame-handler): Update to new variable name
gdb-get-buffer-create.
(gdbmi-frame-handler): Use hollow-right-triangle for all selected
frames which except the innermost (where execution has stopped).
(fork_load_infrun_state): Set inferior_ptid and stop_pc here.
Update the register cache and selected frame also.
(linux_fork_mourn_inferior): Use fork_load_infrun_state. Return
to single fork mode if necessary.
(linux_fork_context): Remove bits handled by fork_load_infrun_state.
* Makefile.in (linux_fork_h): New.
(linux-fork.o, linux-nat.o): Update.
(mips_linux_init_abi): Use 128-bit long double for N32 and N64.
(mips_n32n64_return_value): Support 128-bit long double.
(print_gp_register_row): Don't print spaces before ignored
or floating point registers.
* gdb_proc_service.h: New file.
* linux-i386-low.c, linux-x86-64-low.c, thread-db.c: Use the
new "gdb_proc_service.h".
* proc-service.c: Likewise.
(ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t.
(ps_lgetfpregs, ps_lsetfpregs): Use a void* argument.
* Makefile.in (gdb_proc_service_h): Updated.
* configure, config.in: Regenerated.
* linux-nat.c (kill_inferior): Just call target_mourn_inferior
instead of getting tricky for the multi-fork case.
* linux-fork.c (linux_fork_killall): Call PT_KILL and waitpid
for each fork, and then use init_fork_list to delete them.
* gdb.texinfo (Target Commands): Update text describing how to
specify a target. Refer to the detailed section on remote
debugging, not the brief mention.
* solib-svr4.c (svr4_current_sos): Move up initialization of
l_addr, such that it clearly covers all cases.
gdb/testsuite/ChangeLog:
* gdb.base/prelink.exp: Anchor tested-for regular expression
on gdb prompt.
libunwind_frame_prev_register to use a gdb_byte buffer and
extract_unsigned_integer.
(ia64_libunwind_sigtramp_frame_prev_register): Likewise.
* libunwind-frame.c (libunwind_frame_prev_register): Change type
of last argument to `gdb_byte *'
* libunwind-frame.h: Adjust declaration.
* gdb.base/prelink.exp: Likewise. Add -q to prelink runs.
Rename executable to prelinkt. Don't re-prelink if we didn't
get a core file. Test prelink -u exit status to tell whether
prelinking failed. Use gdb_test_multiple.
* hppa-tdep.h (unwind_table_entry): Update field names to match HP
runtime specification.
* hppa-tdep.c (internalize_unwinds, hppa_frame_cache): Likewise.
(unwind_command): Likewise.
* hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Use
TDEP->is_elf to determine if we are working with a SOM binary.
(null_symtab_and_line): Remove unused variable.
* config/pa/hppa64.mt: Use tm-hppa.h.
* config/pa/tm-hppa64.h: Remove file.
Fortran. Delete this from Fortran expression.
It is now used by Fortran 90 and later to access the member
of derived type. Add this into Fortran expression.
* f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT.
Print each elements in the derived type.
* f-typeprint.c (print_equivalent_f77_float_type): Add a parameter
level into the function definition to do indented printing. And
call fprintfi_filtered instead to do indented printing.
(f_type_print_base): Replace fprintf_filtered with the indented
version (fprintfi_filtered).
(f_type_print_base): Call indented print_equivalent_f77_float_type.
(f_type_print_base): Add code to handle TYPE_CODE_STRUCT. Print
the definition of the derived type.
(async_stop_sig, async_float_handler): Remove duplicated
prototypes.
(handle_sighup): Guard prototype with SIGHUP.
(async_do_nothing): Guard function and prototype with
SIGQUIT || SIGHUP.
(async_disconnect): Guard prototype with SIGHUP.
(async_stop_sig): Guard prototype with STOP_SIGNAL.
* defs.h (directory_switch): Add prototype.
* main.c (captured_main): Use directory_switch() instead of
directory_command() to add directories from the -d switch.
* source.c (directory_switch): New function.
(add_path): Use buildargv() to parse spaces in filenames properly.
Strip multiple trailing '/' rather than just one.
* symfile.c (add_symbol_file_command): Use buildargv(), instead of
hand decoding the command line, to allow use of quotes and spaces.
(_initialize_symfile): Reorganize the help message for add-symbol-file
such that 'help files' shows a better message.
testsuite/
* gdb.base/help.exp (help add-symbol-file): Update.
* symfile.c (generic_load): Use buildargv() and tilde_expand()
to parse file names with quoting, spaces and tildes properly.
(load_command): Quote all special characters before calling
target_load() such that buildargv() doesn't break file names.
(_initialize_symfile): Mention the load offset in the help for
the load command.
* remote-sim.c: Include readline.h.
(gdbsim_load): Use buildargv and tilde_expand() to parse file
names with quoting, spaces and tildes properly.
* target.h (target_load): Comment the parameters better.
* Makefile.in (remote_sim.o): Add readline.h dependency.
testsuite/
* gdb.base/help.exp (help load): Update expected results.
(cygwin_load_end): Ditto.
(have_saved_context): Ditto.
(saved_context): Ditto.
(max_dll_name_len): Delete obsolete variable.
(do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll if we
are in a cygwin signal rather than a windows signal.
(solib_symbols_add): Detect and store beginning and end of cygwin DLL if dll
being loaded is the cygwin DLL.
(register_loaded_dll): Remove calculation of max_dll_name_len.
(win32_clear_solib): Ditto.
(handle_load_dll): Delete obsolete variable. Remove unneeded call to
solib_add.
(handle_output_debug_string): Detect and store signal information sent by
Cygwin here.
(handle_exception): Silently pass on errors in the cygwin DLL. Return -1 on
first pass exception.
(win32_continue): Remove spurious clearing of continue_status.
(get_win32_debug_event): Deal differently first chance exception.
2006-02-19 Fred Fish <fnf@specifix.com>
* gdb.base/pc-fp.exp (get_valueofx): Don't print environment
specifix hex value as part of results.
* gdb.base/shreloc.exp (get_msym_addrs): Ditto.
* eval.c (evaluate_subexp_standard): For OP_TYPE, return
a non lval value zero, of the appropriate type, when avoiding
side effects.
* typeprint.c (ptype_eval): Remove function and declaration.
(ptype_command): Simplify to just a call to whatis_exp.
* gdb.texinfo (Symbols): Update descriptions of 'whatis' and
'ptype' commands to reflect the fact that the only significant
difference between them is that ptype prints the complete type
description instead of just the name.
* gdb.base/whatis.c: Define variables using typedefs char_addr,
ushort_addr, and slong_addr, so the typedefs are not optimized
away.
* gdb.base/whatis.exp: Add tests using type name for struct type,
union type, enum type, and typedef.
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui
2006-02-13 Jim Blandy <jimb@redhat.com>
* gdb.base/scope.exp (test_at_main): Remove logic to handle the
case where it takes two "next" commands to skip past the init
call.
2006-02-12 Fred Fish <fnf@specifix.com>
* gdb.base/scope.exp (test_at_main): Use gdb_test_multiple
to handle cases where it takes two "next" commands to skip
past the init call.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
(ALLDEPFILES): Add mingw-hdep.c and posix-hdep.c.
* configure.ac: Add gdb_host_obs to CONFIG_OBS. Set gdb_host_obs
to posix-hdep.o by default.
* configure: Regenerated.
* configure.host: Document gdb_host_obs. Add an entry for
i[34567]86-*-mingw32*.
* mingw-hdep.c, posix-hdep.c: New files.
* utils.c (safe_strerror): Remove, moved to posix-hdep.o.
* osabi.c (gdb_osabi_name): Add name of new value GDB_OSABI_AIX.
* rs6000-tdep.h: New file.
* rs6000-tdep.c: Include "rs6000-tdep.h".
(rs6000_gdbarch_init): Remove enabling of software single step.
Will be done in the AIX-specific initialization routine.
* rs6000-aix-tdep.c: New file.
* config/powerpc/aix.mt (TDEPFILES): Add rs6000-aix-tdep.o.
* Makefile.in (rs6000_tdep_h): New variable.
(rs6000-tdep.o): Update dependencies.
(rs6000-aix-tdep.o): New rule.
30 bits. Add load_all_dies flag.
(load_partial_dies): Load all DIEs if per_cu->load_all_dies is set.
Load DW_TAG_member by default. Remove internal_error call.
(find_partial_die): Reload the compilation unit if we can not find
a DIE in the cache. Call internal_error here if we still can not
find the DIE.
