* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
rs6000/powerpc-isa205-altivec32l-expedite,
powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
rs6000/powerpc-isa205-altivec64l-expedite,
powerpc-isa205-vsx64l-expedite): New variables.
* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.
gdbserver/
* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
powerpc-isa205-64l.o, powerpc-isa205-64l.c,
powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
XML target descriptions.
* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
when inferior is running on an ISA 2.05 or later processor. Add
special case to return offset for full 64-bit slot of FPSCR when
in 32-bits.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
output "thread:TID" in the T stop reply.
* server.c (disable_packet_vCont, disable_packet_Tthread)
(disable_packet_qC, disable_packet_qfThreadInfo): New globals.
(handle_query): If requested, disable support for qC, qfThreadInfo
and qsThreadInfo.
(handle_v_requests): If requested, disable support for vCont.
(gdbserver_show_disableable): New.
(main): Handle --disable-packet and --disable-packet=LIST.
* server.h (disable_packet_vCont, disable_packet_Tthread)
(disable_packet_qC, disable_packet_qfThreadInfo): Declare.
(set_register_cache): Verify that PBUFSIZ is large enough to hold a
full register packet.
* regcache.h (registers_length): Remove prototype.
* server.h (PBUFSIZ): Define to 16384.
* Makefile.in (ppc_linux_tdep_h): New macro.
(powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
(powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
(powerpc_e500l_c): Likewise.
(ppc-linux-nat.o): Update dependencies.
(ppc-linux-tdep.o): Update dependencies.
(rs6000-tdep.o): Update dependencies.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
(ppc_linux_svr4_fetch_link_map_offsets): Remove.
(ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
(ppc_supply_reg, ppc_collect_reg): Add prototypes.
(tdesc_powerpc_e500): Remove.
* rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
and "features/rs6000/powerpc-altivec64.c".
(ppc_supply_reg, ppc_collect_reg): Make global.
(variants): Use tdesc_powerpc_32 for "powerpc" and
tdesc_powerpc_altivec64 for "powerpc64".
(_initialize_rs6000_tdep): Initialize AltiVec descriptions.
* ppc-linux-tdep.h: New file.
* ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
Include "features/rs6000/powerpc-32l.c".
Include "features/rs6000/powerpc-altivec32l.c".
Include "features/rs6000/powerpc-64l.c".
Include "features/rs6000/powerpc-altivec64l.c".
Include "features/rs6000/powerpc-e500l.c".
(ppc_linux_supply_gregset): New function.
(ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
(ppc32_linux_gregset): Use ppc_linux_supply_gregset.
(ppc64_linux_gregset): Likewise.
(ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
(ppc_linux_trap_reg_p): New function.
(ppc_linux_write_pc): New function.
(ppc_linux_core_read_description): New function.
(ppc_linux_init_abi): Install ppc_linux_write_pc and
ppc_linux_core_read_description. Install orig_r3 and trap
registers if present in the target description.
(_initialize_ppc_linux_tdep): Initialize Linux target descriptions.
* ppc-linux-nat.c: Include "ppc-linux-tdep.h".
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_register_u_addr): Handle orig_r3 and trap registers.
(fetch_ppc_registers): Likewise.
(store_ppc_registers): Likewise.
(store_register): Likewise.
(ppc_linux_read_description): Check whether AltiVec is supported.
Check whether inferior is 32-bit or 64-bit. Return the appropriate
Linux target description.
* features/Makefile (WHICH): Use rs6000/powerpc-32l and
rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
of rs6000/powerpc-64. Use rs6000/powerpc-e500l instead of
rs6000/powerpc-e500. Update -expedite variables accordingly.
* features/rs6000/power-spe.xml: Use regnum 73 for "acc".
* features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-e500.c: Regenerate.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/power-linux.xml: New file.
* features/rs6000/power64-linux.xml: New file.
* features/rs6000/powerpc-32l.xml: New file.
* features/rs6000/powerpc-altivec32l.xml: New file.
* features/rs6000/powerpc-64l.xml: New file.
* features/rs6000/powerpc-altivec64l.xml: New file.
* features/rs6000/powerpc-e500l.xml: New file.
* features/rs6000/powerpc-32l.c: New (generated) file.
* features/rs6000/powerpc-altivec32l.c: New (generated) file.
* features/rs6000/powerpc-64l.c: New (generated) file.
* features/rs6000/powerpc-altivec64l.c: New (generated) file.
* features/rs6000/powerpc-e500l.xml: New (generated) file.
* regformats/reg-ppc.dat: Remove.
* regformats/reg-ppc64.dat: Remove.
* regformats/rs6000/powerpc-32.dat: Remove.
* regformats/rs6000/powerpc-64.dat: Remove.
* regformats/rs6000/powerpc-e500.dat: Remove.
* regformats/rs6000/powerpc-32l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
* regformats/rs6000/powerpc-64l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
* regformats/rs6000/powerpc-e500l.dat: New (generated) file.
gdbserver/ChangeLog:
* configure.srv (powerpc*-*-linux*): Set srv_regobj to
powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
powerpc-64l.o, and powerpc-altivec64l.o.
Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
rs6000/power-linux.xml, and rs6000/power64-linux.xml
to srv_xmlfiles.
* Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
(powerpc-32l.o, powerpc-32l.c): ... these new rules.
(powerpc-32.o, powerpc-32.c): Remove, replace by ...
(powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
(powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
(powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
(reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
(powerpc-64l.o, powerpc-64l.c): ... these new rules.
(powerpc-64.o, powerpc-64.c): Remove, replace by ...
(powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
(clean): Update.
* linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
(init_registers_powerpc_32l): ... this new prototype.
(init_registers_powerpc_32): Remove, replace by ...
(init_registers_powerpc_altivec32l): ... this new prototype.
(init_registers_powerpc_e500): Remove, replace by ...
(init_registers_powerpc_e500l): ... this new prototype.
(init_registers_ppc64): Remove, replace by ...
(init_registers_powerpc_64l): ... this new prototype.
(init_registers_powerpc_64): Remove, replace by ...
(init_registers_powerpc_altivec64l): ... this new prototype.
(ppc_num_regs): Set to 73.
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
(ppc_cannot_store_register): Handle orig_r3 and trap.
(ppc_arch_setup): Update init_registers_... calls.
(ppc_fill_gregset): Handle orig_r3 and trap.
* inferiors.c (clear_inferiors): Reset current_inferior.
srv_regobj. Remove rs6000/powerpc-e500.xml and rs6000/power-spe.xml
from reg_xmlfiles.
* linux-ppc-low.c: Include <elf.h>.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Define.
(ppc_hwcap): New global variable.
(ppc_regmap): Remove __SPE__ #ifdef sections.
(ppc_regmap_e500): New global variable.
(ppc_cannot_store_register): Update __SPE__ special case.
(ppc_get_hwcap): New function.
(ppc_arch_setup): Use it to determine whether inferior supports
AltiVec or SPE registers. Set the_low_target.regmap if appropriate.
(ppc_fill_vrregset, ppc_store_vrregset): Define unconditionally.
Do not access registers if target does not support AltiVec.
(ppc_fill_evrregset, ppc_store_evrregset): Define unconditionally.
Do not access registers if target does not support SPE.
(target_regsets): Unconditionally include AltiVec and SPE regsets.
* linux-low.c (disabled_regsets, num_regsets): New.
(use_regsets_p): Delete.
(linux_wait_for_process): Clear disabled_regsets.
(regsets_fetch_inferior_registers): Check and set it.
(regsets_store_inferior_registers): Likewise.
(linux_fetch_registers, linux_store_registers): Do not use
use_regsets_p.
(initialize_low): Allocate disabled_regsets.
* features/Makefile (%.dat): Set xmltarget to the base filename
of the XML source, without subdirectory.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.
gdbserver/ChangeLog:
* server.c (get_features_xml): Fix inverted condition.
(handle_query): Always support qXfer:feature:read.
* NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
argument. Gather all gdbserver features together.
* fork-child.c (exec_wrapper): New variable.
(fork_inferior): Use it.
(startup_inferior): Skip an extra trap if using "set exec-wrapper".
(unset_exec_wrapper_command, _initialize_fork_child): New.
* gdb.texinfo (Starting): Document "set exec-wrapper".
(Server): Document gdbserver --wrapper.
* server.c (wrapper_argv): New.
(start_inferior): Handle wrapper_argv. If set, expect an extra
trap.
(gdbserver_usage): Document --wrapper.
(main): Parse --wrapper.
* regformats/reg-ppc.dat: Rename "ps" to "msr".
* regformats/reg-ppc64.dat: Likewise.
gdbserver/ChangeLog:
* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
powerpc-*-linux* to srv_regobj and reg_xmlfiles.
* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
(ppc_set_pc): Likewise.
(ppc_arch_setup): New function.
(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
of collect_register.
(the_low_target): Use ppc_arch_setup as arch_setup initializer.
instead of linux-ppc64-low.o.
* linux-ppc64-low.c: Remove file.
* Makefile.in (SFILES): Remove linux-ppc64-low.c.
(linux-ppc64-low.o): Remove rule.
* linux-ppc-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(ppc_regmap): Conditionally define depending on __powerpc64__.
(ppc_cannot_store_register): Do not special-case "fpscr" when
compiled on __powerpc64__.
(ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): New function.
(ppc_breakpoint): Change type to "unsigned int".
(ppc_breakpoint_at): Change type of "insn" to "unsigned int".
(the_low_target): Conditionally provide initializers for the
arch_setup member depending on __powerpc64__. Install
collect_ptrace_register and supply_ptrace_register members.
