* cli/cli-script.c (process_next_line): Handle 'stepping'.
gdb/testsuite/
* gdb.trace/while-dyn.exp (executable): New variable.
(binfile): Use it.
(test_while_stepping): New function. Move most tests here. Call
it once for each of the while-stepping, stepping and ws aliases.
* defs.h (read_command_lines, read_command_lines_1): New
parameters validator and closure.
* tracepoint.h (struct action_line): Remove.
* breakpoint.h (struct breakpoint): Remove the 'actions'
field.
* defs.h (enum command_control_type): New value
while_stepping_control.
(struct command_line): Add comments.
* breakpoint.c (breakoint_is_tracepoint): New.
(breakpoint_set_commands): For tracepoints,
verify the commands are permissible.
(check_tracepoint_commands): New.
(commands_command): Require that each new line is validated using
check_tracepoint_command, if we set commands for a tracepoint.
(create_tracepoint_from_upload): Likewise.
(print_one_breakpoint_location): Remove the code to print
actions specifically.
(tracepoint_save_command): Relay to print_command_lines.
* cli/cli-script.c (process_next_line): New parameters validator
and closure. Handle 'while-stepping'. Call validator if not null.
(read_command_lines, read_command_lines1): Likewise.
(recurse_read_control_structure): New parameters validator and
closure. Handle while_stepping_control.
(print_command_lines): Handle while-stepping.
(get_command_line, define_command, document_command): Adjust.
* remote.c (remote_download_tracepoint): Adjust.
* tracepoint.c (make_cleanup_free_actions, read_actions)
(free_actions, do_free_actions_cleanup): Remove.
(trace_actions_command): Use read_command_lines.
(validate_actionline): Use error in one place.
(encode_actions_1): New, extracted from...
(encode_actions): ...this. Also use cleanups for exception
safety.
(trace_dump_command): Adjust.
* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
it's tracepoint.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
* defs.h (read_command_lines_1): Declare.
* cli/cli-script.c (read_next_line): Only return string,
do not process.
(process_next_line): New, extracted from read_next_line.
(recurse_read_control_structure): Take a function pointer to the
read function.
(get_command_line) Pass the read_next_line as reader function
into recurse_read_control_structure.
(read_command_lines_1): New, extracted from...
(read_command_lines): ...here.
* cli/cli-cmds.c (disassemble_command): Add a new modifier /r
to "disassemble" command to print the raw instructions in hex as
well as in symbolic form.
(init_cli_cmds): Ditto.
(print_disassembly): Change "mixed" to "flags" to translate
the behavior of disassemble.
(disassemble_current_function): Ditto.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
* stack.c (gdb_disassembly_stub): Ditto.
* disasm.c (do_mixed_source_and_assembly): Ditto.
(do_mixed_source_and_assembly): Ditto.
(do_assembly_only): Ditto.
(gdb_disassembly): Ditto.
(dump_insns): print the raw instructions in hex as well as in
symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
* disasm.h (DISASSEMBLY_SOURCE): Include source code with the
assembly if it and flags is true.
(DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
the assembly if it and flags is true.
(gdb_disassembly): Update extern.
* NEWS: Document disassemble/r support.
Report error on inaccessible memory.
* cli/cli-dump.c: Include gdbcore.h.
(dump_memory_to_file): Call read_memory instead of target_read_memory.
gdb/testsuite/
* gdb.base/dump.exp (inaccessible memory is reported): New test.
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* printcmd.c (print_scalar_formatted): Always truncate
unsigned data types.
* cli-dump.c (struct callback_data): Change type of load_offset
to CORE_ADDR.
(restore_binary_file): Update type casts.
(restore_command): Parse load_offset as address, not long.
* utils.c (string_to_core_addr): Do not sign-extend value.
* varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
before comparing against requested frame address.
testsuite/ChangeLog:
* gdb.base/dump.exp: Handle SPU like 64-bit platforms.
Remove the PROT parameter from openp.
* source.c (openp): Remove the parameter PROT. Assertion check MODE.
defs.h (openp): Update the prototype.
Update all the openp callers.
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* gdb.base/radix.exp: Add tests to ensure that that set
input-radix 0 and set output-radix 0 are really rejected.
attribute in GLIBC 2.8.
* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
* inflow.c (check_syscall): New function.
(new_tty): Use check_syscall to check return values from open and dup.
* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
* main.c (captured_main): Call cwd after setting up gdb_stderr;
check for errors from getcwd.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
* ui-file.c (stdio_file_write): Ignore return value from fwrite.
(stdio_file_fputs): Same.
* utils.c (internal_vproblem): abort if last-ditch error message
write fails.
PR cli/2563:
* cli/cli-decode.c (delete_cmd): Add hook-related out parameters.
(add_cmd): Update. Install hooks into new command.
(add_alias_cmd): Update.
gdb/testsuite
* gdb.base/commands.exp (redefine_hook_test): New proc.
Call it.
PR gdb/1815:
* cli/cli-decode.c (delete_cmd): Forward declare.
(delete_cmd): Now static. Change return type. Remove command
from alias chain. Rewrite.
(add_cmd): Initialize new fields. Update cmd_pointer on all
aliases.
(add_alias_cmd): Put command on alias chain.
* command.h (delete_cmd): Don't declare.
* cli/cli-decode.h (delete_cmd): Don't declare.
(struct cmd_list_element) <aliases, alias_chain>: New fields.
gdb/testsuite
* gdb.base/commands.exp (redefine_backtrace_test): New proc.
Call it.
* reggroups.c (maintenance_print_reggroups): Make a cleanup.
* regcache.c (regcache_print): Make a cleanup.
* maint.c (maintenance_print_architecture): Make a cleanup.
* dummy-frame.c (maintenance_print_dummy_frames): Make a cleanup.