(TC_INIT_FIX_DATA): Initialize to 0, not NULL.
* config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
(md_apply_fix3): Delete fix_is_thumb variable; refer to
fixP->tc_fix_data directly in the sole place it was used.
Explicitly truncate value, *valP, fixP->fx_addnumber, and
fixP->fx_offset to 32 bits, for consistent behavior between 32-
and 64-bit hosts.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (struct proc_pending): New.
(unwind): Replace proc_start with proc_pending.
(unwind_diagnostic): Check unwind.proc_pending.sym.
(dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
Check if previous proc not closed. Record all entry points.
(dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
Set symbol sizes for entry points recorded in dot_proc. Check
arguments for consistency with respective .proc's.
(md_assemble): Replace unwind.proc_start with
unwind.proc_pending.sym.
gas/testsuite/
2005-05-27 Jan Beulich <jbeulich@novell.com>
* gas/ia64/proc.l: Adjust.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
and last_ptr. Check all in-use slots for first one with non-NULL
unwind_record. Don't reload end_ptr before second update round.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
BFD_RELOC_UNUSED when determining the width of the reloc.
* gas/Makefile.am: Have 'all' depend on 'info'.
* ld/Makefile.am: Have 'all' depend on 'info' and 'ld.1'.
* bfd/Makefile.in, binutils/Makefile.in, gas/Makefile.in
* ld/Makefile.in: Regenerate.
2005-05-19 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
relocations in unwind section.
gas/testsuite/
2005-05-19 Jan Beulich <jbeulich@novell.com>
* gas/ia64/reloc-uw.s: New.
* gas/ia64/reloc-uw.d: New.
* gas/ia64/reloc-uw-ilp32.d: New.
* gas/ia64/ia64.exp: Run new test.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
2005-05-17 Jan Beulich <jbeulich@novell.com>
* read.c (_find_end_of_line): New.
(find_end_of_line): New.
(HANDLE_CONDITIONAL_ASSEMBLY): Use it.
(read_a_source_file): Use it.
(s_globl): Use it.
(s_macro): Use it.
(get_line_sb): Use it.
(s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
(s_comm_internal): Likewise.
(s_lsym): Likewise.
(s_macro): Likewise.
(s_ignore): Use ignore_rest_of_line.
* read.h (find_end_of_line): Prototype.
(discard_rest_of_line): Remove prototype. #define to
ignore_rest_of_line.
gas/testsuite/
2005-05-17 Jan Beulich <jbeulich@novell.com>
* gas/mmix/err-byte1.s: Adjust expected error text on line 10.
* config/tc-v850.c (md_assemble): When creating a fix record the operand in the
tc_fix_data field.
(md_apply_fix3): When applying a resolved fix use the operand's insertion
procedure to store the value, if the operand has been recorded.
* gas/v850/split-lo16.s: Add test for a lo() pseudo reloc corrupting an ld.w
instruction.
* gas/v850/split-lo16.d: Add expected, correct (ie not corrupt) output.
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
* config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
Handle label-without-colon before ordinary dot-pseudo as an
ordinary label. Don't leak memory for label-without-colon alone
on a line. Don't mmixal-munge operands for dot-pseudos.
2005-05-10 Jan Beulich <jbeulich@novell.com>
* macro.c (get_any_string): Remove the two last parameters. Replace
references to the former expand parameter by using macro_alternate.
Simplify loop condition for checking for end-of-string.
(get_string): Remove redunant call to sb_skip_white.
(do_formals): Remove two last arguments to get_any_string.
(macro_expand): Likewise.
(expand_irp): Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_disp): Discard displacement entirely when zero and
not required by encoding constraints.
gas/testsuite/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/tlsd.[sd]: Adjust to not assume zero displacement will
actually be present in memory addressing.
* gas/i386/tlspic.[sd]: Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Disallow use of prefix separator
and comma in Intel mode.
include/opcode/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add ht and hnt.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
names to match ABI. Add more registers for 32-bit and 64-bit modes.
Make name array static and const. Adjust lookup to account for NULL
entries (standing for unused register numbers).
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Consider all matching instructions
when checking for string instruction after string-only prefix.
2005-05-06 Jan Beulich <jbeulich@novell.com>
* macro.c (new_formal, del_formal): New.
(do_formals): Use new_formal. Check for and parse qualifier. Warn if
required argument has default value. Stop looking for more formal
when there was a vararg one.
(macro_expand_body): Use new_formal and del_formal.
(macro_expand): Likewise. Initialize local variable err. Don't
return immediately when encountering an error. Warn when keyword
argument already had a value assigned. Eliminate duplicate clearing
of argument value. When current positional argument matches parameter
of vararg type, assign to it all the remaining arguments. Issue error
when required parameter does not have value.
(free_macro): Use del_formal.
(expand_irp): Initialize formal type. Free buffers associated with
formal prior to returning.
* macro.h (struct formal_struct): Add new field 'type' with new
enumeration type 'formal_type'.
* doc/as.texinfo: Document macro parameter qualifiers.
* NEWS: Mention new functionality.
gas/testsuite/
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add check for bad qualifier specification.
* gas/macros/badarg.l: Adjust.
* gas/macros/vararg.[sd]: New.
* gas/macros/macros.exp: Run new test.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
list traversal. Use bfd_section_list_prepend.
* config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
over the section list.
* config/tc-xtensa.c (xtensa_remove_section): Delete.
(xtensa_insert_section): Delete.
(xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
and bfd_section_list_prepend.
(xtensa_reorder_seg_list): Use bfd_section_list_remove and
bfd_section_list_insert_after.
