When I exercise GDBserver software single step, I see the following
error, which has been already handled by GDB properly.
In GDBserver log, we can see, GDBserver tries to single step instruction
on 0xb6e0a6e4, and destination address is 0xffff0fe0,
stop pc is 0xb6e0a6e4
Writing f001f0e7 to 0xffff0fe0 in process 7132
Failed to insert breakpoint at 0xffff0fe0 (Input/output error).
Failed to insert breakpoint at 0xffff0fe0 (-1).
(gdb) disassemble __aeabi_read_tp,+8
Dump of assembler code from 0xb6e0a6e0 to 0xb6e0a6e8:
0xb6e0a6e0 <__aeabi_read_tp+0>: mvn r0, #61440 ; 0xf000
0xb6e0a6e4 <__aeabi_read_tp+4>: sub pc, r0, #31
however, it fails inserting breakpoint there. This problem has already
fixed by GDB, see comments in arm-linux-tdep.c:arm_linux_software_single_step
/* The Linux kernel offers some user-mode helpers in a high page. We can
not read this page (as of 2.6.23), and even if we could then we
couldn't set breakpoints in it, and even if we could then the atomic
operations would fail when interrupted. They are all called as
functions and return to the address in LR, so step to there
instead. */
so we need to do the same thing in GDB side as well. This patch adds
a new field fixup in arm_get_next_pcs_ops, so that we can fix up PC
for arm-linux target. In this way, both GDB and GDBserver can single
step instructions going to kernel helpers.
gdb:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
self->ops->fixup if it isn't NULL.
* arch/arm-get-next-pcs.h: Include gdb_vecs.h.
(struct arm_get_next_pcs_ops) <fixup>: New field.
* arch/arm-linux.c: Include common-regcache.h and
arch/arm-get-next-pcs.h.
(arm_linux_get_next_pcs_fixup): New function.
* arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
* arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
it with arm_linux_get_next_pcs_fixup.
(arm_linux_software_single_step): Move code to
arm_linux_get_next_pcs_fixup.
* arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_ops): Initialize it with
arm_linux_get_next_pcs_fixup.
This function is never used, since it is superseded by
arm_linux_displaced_step_copy_insn.
gdb/ChangeLog:
* arm-tdep.c (arm_displaced_step_copy_insn): Remove.
(ARM displaced stepping support): Remove reference to
arm_displaced_step_copy_insn in comment.
* arm-tdep.h (arm_displaced_step_copy_insn): Remove.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
reference to arm_displaced_step_copy_insn in comment.
Nowadays, get_next_pcs in linux_target_ops has two parameters PC
and REGCACHE. Parameter PC looks redundant because it can be go
from REGCACHE. The patch is to remove PC from the arguments for
various functions.
gdb:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Remove argument pc. Get pc by regcache_read_pc. Callers updated.
(arm_deal_with_atomic_sequence_raw): Likewise.
(thumb_get_next_pcs_raw): Likewise.
(arm_get_next_pcs_raw): Likewise.
(arm_get_next_pcs): Remove argument pc. Callers updated.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Remove argument pc.
* linux-low.c (install_software_single_step_breakpoints): Don't
call regcache_read_pc.
* linux-low.h (struct linux_target_ops) <get_next_pcs>: Remove
argument pc.
This patch fixes the following regression introduced by commit d0e59a68
step^M
39 } /* handler */^M
1: x/i $pc^M
=> 0x8740 <handler+80>: sub sp, r11, #0^M
(gdb) step^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
setitimer () at ../sysdeps/unix/syscall-template.S:81^M
81 ../sysdeps/unix/syscall-template.S: No such file or directory.^M
1: x/i $pc^M
=> 0xb6eff9c0 <setitimer>: push {r7}^M
(gdb) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
in my test setting, program is compiled in arm mode, but the glibc
is built in thumb mode, so when we do 'step' to step over syscall
instruction svc for SIGRETURN, GDB should set breakpoint for arm mode
in the program, even though the current program in glibc is in thumb
mode. Current GDB doesn't consider the case that the mode of program
SIGRETURN goes to can be different from current program mode.
In fact, GDB has taken care of this arm/thumb mode changes already,
see
/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
return 1. In addition, set IS_THUMB depending on whether we
will return to ARM or Thumb code. Return 0 if it is not a
rt_sigreturn/sigreturn syscall. */
static int
arm_linux_sigreturn_return_addr (struct frame_info *frame,
unsigned long svc_number,
CORE_ADDR *pc, int *is_thumb)
but in the commit d0e59a68
> - arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
> + if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
> + next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
the IS_THUMB setting is lost, so it is a regression.
gdb:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
gdb/gdbserver:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_sigreturn_next_pc.
Field syscall_next_pc in struct gdbarch_tdep was to calculate the
next pc of syscall instruction. On linux target, syscall_next_pc
is set to arm_linux_syscall_next_pc, to do linux specific things.
However, after we have struct arm_get_next_pcs_ops, we can do the
same thing in struct arm_get_next_pcs_ops field syscall_next_pc,
so syscall_next_pc in struct gdbarch_tdep is not needed any more.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Declare.
(arm_linux_get_next_pcs_ops): Install
arm_linux_get_next_pcs_syscall_next_pc.
(arm_linux_syscall_next_pc): Change to ...
(arm_linux_get_next_pcs_syscall_next_pc): ... it.
(arm_linux_init_abi): Don't set tdep->syscall_next_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
(arm_get_next_pcs_syscall_next_pc): Make it static. Don't
call tdep->syscall_next_pc.
* arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
(arm_get_next_pcs_syscall_next_pc): Remove.
This patch makes thumb2_breakpoint static. When writing this patch,
I find the only reason we keep thumb2_breakpoint extern is that it
is used as an argument passed to arm_gdbserver_get_next_pcs. However,
field arm_thumb2_breakpoint is only used in a null check in
thumb_get_next_pcs_raw, so I wonder why do need to pass thumb2_breakpoint
to arm_gdbserver_get_next_pcs.
thumb2_breakpoint was added by Daniel Jacobowitz in order to support
single-step IT block
https://sourceware.org/ml/gdb-patches/2010-01/msg00624.html the logic
there was if we have 32-bit thumb-2 breakpoint defined, we can safely
single-step IT block, otherwise, we can't. Daniel didn't want to use
16-bit thumb BKPT instruction, because it triggers even on instruction
which should be executed. Secondly, using 16-bit thumb illegal
instruction on top of 32-bit thumb instruction may break the meaning of
original IT blocks, because the other 16-bit can be regarded as an
instruction. See more explanations from Daniel's kernel patch
http://www.spinics.net/lists/arm-kernel/msg80476.html
Let us back to this patch, GDB/GDBserver can safely single step
IT block if thumb2_breakpoint is defined, but the single step logic
doesn't have to know the thumb-2 breakpoint instruction. Only
breakpoint insertion mechanism decides to use which breakpoint
instruction. In the software single step code, instead of pass
thumb2_breakpoint, we can pass a boolean variable
has_thumb2_breakpoint indicate whether the target has thumb-2
breakpoint defined, which is equivalent to the original code.
Regression tested on arm-linux. No regression.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
instead.
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
<arm_thumb2_breakpoint>: Remove.
<has_thumb2_breakpoint>: New field.
(arm_get_next_pcs_ctor): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass
1 to arm_get_next_pcs_ctor.
* arm-tdep.c (arm_software_single_step): Pass 0 to
arm_get_next_pcs_ctor.
gdb/gdbserver:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (thumb2_breakpoint): Make it static.
* linux-aarch32-low.h (thumb2_breakpoint): Remove declaration.
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Pass 1 to
arm_get_next_pcs_ctor.
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
This patch is in preparation for software single step support on ARM in
GDBServer. It refactors arm_*_software_single_step and sub-functions to
use regcache instead of frame to access registers so that the code can be
shared more easily between GDB and GDBServer.
Note also that since the intention is at some point to get rid of frame
completely in that function, memory reads have also been replaced by
read_memory_unsigned_integer rather than get_frame_memory_unsigned.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc_offset): New function.
(arm_linux_sigreturn_next_pc): Likewise.
(arm_linux_syscall_next_pc): Use regcache instead of frame.
(arm_linux_software_single_step): Likewise.
* arm-tdep.c (arm_is_thumb): New function.
(shifted_reg_va): Use regcache instead of frame.
(thumb_get_next_pc_raw): Likewise.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_software_single_step): Likewise.
* arm-tdep.h (struct gdbarch_tdep): Use regcache for syscall_next_pc.
(arm_get_next_pc): Use regcache.
(arm_deal_with_atomic_sequence): Likewise.
(arm_is_thumb): New declaration.
* regcache.c (regcache_raw_get_unsigned): New function.
* regcache.h (regcache_raw_get_unsigned): New function declaration.
getdents buffer size is given in bytes, not dirent entries (which have
variable size anyway). We don't need size_dirent and size_dirent64 for
this reason.
readdir, on the other hand, needs size of old_linux_dirent, which is
a somewhat different structure. Accordingly, rename size_dirent
to size_old_dirent.
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Remove
size_dirent{,64}, add size_old_dirent.
* amd64-linux-tdep.c (amd64_linux_init_abi): Remove size_dirent{,64},
add size_old_dirent.
(amd64_x32_linux_init_abi): Remove size_dirent{,64}, add
size_old_dirent.
* arm-linux-tdep.c (arm_linux_init_abi): Remove size_dirent{,64},
add size_old_dirent.
* i386-linux-tdep.c (i386_linux_init_abi): Remove size_dirent{,64},
add size_old_dirent.
* linux-record.c (record_linux_system_call): Fix handling of readdir
and getdents{,64}.
* linux-record.h (struct linux_record_tdep): Remove size_dirent{,64},
add size_old_dirent.
* ppc-linux-tdep.c (ppc_init_linux_record_tdep): Remove
size_dirent{,64}, add size_old_dirent.
i386 and arm wrongly set them to 2, when it should be 4. size_[ug]id is used
by getgroups32 etc syscalls, while size_old_[ug]id is used for getgroups16
and friends.
gdb/ChangeLog:
* arm-linux-tdep.c (arm_linux_init_abi): Fix size_[ug]id.
* i386-linux-tdep.c (i386_linux_init_abi): Fix size_[ug]id.
Nowadays, GDB only knows whether architecture supports hardware single
step or software single step (through gdbarch hook software_single_step),
and for a given instruction or instruction sequence, GDB knows how to
do single step (hardware or software). However, GDB doesn't know whether
the target supports hardware single step. It is possible that the
architecture doesn't support hardware single step, such as arm, but
the target supports, such as simulator. This was discussed in this
thread https://www.sourceware.org/ml/gdb/2009-12/msg00033.html before.
I encounter this problem for aarch64 multi-arch support. When aarch64
debugs arm program, gdbarch is arm, so software single step is still
used. However, the underneath linux kernel does support hardware
single step, so IWBN to use it.
This patch is to add a new target_ops hook to_can_do_single_step, and
only use it in arm_linux_software_single_step to decide whether or not
to use hardware single step. On the native aarch64 linux target, 1 is
returned. On other targets, -1 is returned. On the remote target, if
the target supports s and S actions in the vCont? reply, then target
can do single step. However, old GDBserver will send s and S in the
reply to vCont?, which will confuse new GDB. For example, old GDBserver
on arm-linux will send s and S in the reply to vCont?, but it doesn't
support hardware single step. On the other hand, new GDBserver, on
arm-linux for example, will not send s and S in the reply to vCont?,
but old GDB thinks it doesn't support vCont packet at all. In order
to address this problem, I add a new qSupported feature vContSupported,
which indicates GDB wants to know the supported actions in the reply
to vCont?, and qSupported response contains vContSupported if the
stub is able tell supported vCont actions in the reply of vCont?.
If the patched GDB talks with patched GDBserver on x86, the RSP traffic
is like this:
-> $qSupported:...+;vContSupported+
<- ...+;vContSupported+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
then, GDB knows the stub can do single step, and may stop using software
single step even the architecture doesn't support hardware single step.
If the patched GDB talks with patched GDBserver on arm, the last vCont?
reply will become:
<- vCont;c;C;t
GDB thinks the target doesn't support single step, so it will use software
single step.
If the patched GDB talks with unpatched GDBserver, the RSP traffic is like
this:
-> $qSupported:...+;vContSupported+
<- ...+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
although GDBserver returns s and S, GDB still thinks GDBserver may not
support single step because it doesn't support vContSupported.
If the unpatched GDB talks with patched GDBserver on x86, the RSP traffic
is like:
-> $qSupported:...+;
<- ...+;vContSupported+
...
-> $vCont?
<- vCont;c;C;t;s;S;r
Since GDB doesn't sent vContSupported in the qSupported feature, GDBserver
sends s and S regardless of the support of hardware single step.
gdb:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_can_do_single_step): New
function.
(_initialize_aarch64_linux_nat): Install it to to_can_do_single_step.
* arm-linux-tdep.c (arm_linux_software_single_step): Return 0
if target_can_do_single_step returns 1.
* remote.c (struct vCont_action_support) <s, S>: New fields.
(PACKET_vContSupported): New enum.
(remote_protocol_features): New element for vContSupported.
(remote_query_supported): Append "vContSupported+".
(remote_vcont_probe): Remove support_s and support_S, use
rs->supports_vCont.s and rs->supports_vCont.S instead. Disable
vCont packet if c and C actions are not supported.
(remote_can_do_single_step): New function.
(init_remote_ops): Install it to to_can_do_single_step.
(_initialize_remote): Call add_packet_config_cmd.
* target.h (struct target_ops) <to_can_do_single_step>: New field.
(target_can_do_single_step): New macro.
* target-delegates.c: Re-generated.
gdb/gdbserver:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* server.c (vCont_supported): New global variable.
(handle_query): Set vCont_supported to 1 if "vContSupported+"
matches. Append ";vContSupported+" to own_buf.
(handle_v_requests): Append ";s;S" to own_buf if target supports
hardware single step or vCont_supported is false.
(capture_main): Set vCont_supported to zero.
gdb/doc:
2015-09-15 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (General Query Packets): Add vContSupported to
tables of 'gdbfeatures' and 'stub features' supported in the
qSupported packet, as well as to the list containing stub
feature details.
linux_get_siginfo_type is installed to many linux gdbarch. This patch
is to move this to a common area linux-tdep.c:linux_init_abi, so that
linux_get_siginfo_type is installed to every linux gdbarch. If some
linux gdbarch needs its own version, please override it in
$ARCH_linux_init_abi. In the testsuite, we enable siginfo related
tests for all linux targets.
gdb:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
set_gdbarch_get_siginfo_type.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* linux-tdep.c (linux_get_siginfo_type): Change it to static.
(linux_init_abi): Call set_gdbarch_get_siginfo_type.
* linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
linux targets.
This patch is to remove the global variable arm_linux_vfp_register_count
from arm-linux-nat.c. This global variable is set when native gdb
looks for the right target description according HWCAP. However,
'struct gdbarch_tdep' has already had a field have_vfp_registers, which
is a boolean about whether target has vfp registers or not. This
patch converts this boolean field to a numeric counter to replace
global variable arm_linux_vfp_register_count.
gdb:
2015-05-28 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
(fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
instead of arm_linux_vfp_register_count.
(store_vfp_regs): Likewise.
(arm_linux_fetch_inferior_registers): Likewise.
(arm_linux_store_inferior_registers): Likewise.
(arm_linux_read_description): Don't set
arm_linux_vfp_register_count.
* arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
Adjust.
* arm-tdep.c (arm_gdbarch_init): Add assert on
vfp_register_count.
* arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
field to vfp_register_count. All users updated.
When I "set debug displaced 1" to fix fail in
gdb.base/disp-step-syscall.exp, the debug message is wrong. This
patch is to fix it.
gdb:
2015-04-15 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
Hi,
I see this fail on arm-linux target,
FAIL: gdb.base/disp-step-syscall.exp: fork: single step over fork final pc
which is caused by the PC isn't expected after displaced stepping the
svc instruction. The code is:
=> 0xb6ead9a4 <__libc_do_syscall+4>: svc 0
0xb6ead9a6 <__libc_do_syscall+6>: pop {r7, pc}
0xb6ead9a8: nop.w^M
0xb6ead9ac: nop.w
after single step svc instruction, pc should be 0xb6ead9a6, but the
actual value of pc is 0xb6ead9a8. The problem is illustrated by
turning on debug message of displaced stepping,
stepi^M
displaced: stepping Thread 12031 now^M
displaced: saved 0x8574: 02 bc 6a 46 04 b4 01 b4 df f8 10 c0 4d f8 04 cd 03 48 04 4b ff f7 d2 ef ff f7 e8 ef 0d 87 00 00 ^M
displaced: process thumb insn df00 at b6ead9a4^M
displaced: copying svc insn df00^M
displaced: read r7 value 00000078^M
displaced: sigreturn/rt_sigreturn SVC call not in signal trampoline frame^M
displaced: writing insn df00 at 00008574^M
displaced: copy 0xb6ead9a4->0x8574: displaced: check mode of b6ead9a4 instead of 00008574^M
displaced: displaced pc to 0x8574^M
displaced: run 0x8574: 00 df 01 de ^M
displaced: restored Thread 12031 0x8574^M
displaced: PC is apparently 00008576 after SVC step (within scratch space)^M
displaced: writing pc b6ead9a8 <----- WRONG ADDRESS
GDB writes the wrong address back to pc because GDB thinks the
instruction size is 4, which isn't true for thumb instruction.
This patch is to replace 4 with dsc->insn_size.
gdb:
2015-04-15 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_cleanup_svc): Use
dsc->insn_size instead of 4.
Running break-interp.exp with the target always in non-stop mode trips
on PR13858, as enabling non-stop also enables displaced stepping.
The problem is that when GDB doesn't know where the entry point is, it
doesn't know where to put the displaced stepping scratch pad. The
test added by this commit exercises this. Without the fix, we get:
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: break *$pc
set displaced-stepping on
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: set displaced-stepping on
stepi
0x00000000004005be in ?? ()
Entry point address is not known.
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: stepi
p /x $pc
$2 = 0x4005be
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
The fix switches all GNU/Linux ports to get the entry point from
AT_ENTRY in the target auxiliary vector instead of from symbols. This
is currently only done by PPC when Cell debugging is enabled, but I
think all archs should be able to do the same. Note that
ppc_linux_displaced_step_location cached the result, I'm guessing to
avoid constantly re-fetching the auxv out of remote targets, but
that's no longer necessary nowadays, as the auxv blob is itself cached
in the inferior object. The ppc_linux_entry_point_addr global is
obviously bad for multi-process too nowadays.
Tested on x86-64 (-m64/-m32), PPC64 (-m64/-m32) and S/390 GNU/Linux.
Yao tested the new test on ARM as well.
gdb/ChangeLog:
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
linux_displaced_step_location as gdbarch_displaced_step_location
hook.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* linux-tdep.c (linux_displaced_step_location): New function,
based on ppc_linux_displaced_step_location.
* linux-tdep.h (linux_displaced_step_location): New declaration.
* ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
(ppc_linux_inferior_created, ppc_linux_displaced_step_location):
Delete.
(ppc_linux_init_abi): Install linux_displaced_step_location as
gdbarch_displaced_step_location hook, even without Cell/B.E..
(_initialize_ppc_linux_tdep): Don't install
ppc_linux_inferior_created as inferior_created observer.
* s390-linux-tdep.c (s390_gdbarch_init): Install
linux_displaced_step_location as gdbarch_displaced_step_location
hook.
gdb/testsuite/
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* gdb.base/step-over-no-symbols.exp: New file.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
tdep->arm_breakpoint, tdep->thumb_breakpoint, tdep->thumb2_breakpoint
should be set le_ variants in case of arm BE8 code. Those instruciton
sequences are writen to target with simple write_memory, without
regarding gdbarch_byte_order_for_code. But in BE8 case even data
memory is in big endian form, instructions are still in little endian
form.
Because of this issue there are many issues while running gdb test
case in armv7b mode. For example gdb.arch/arm-disp-step.exp test fails
because it gets SIGILL when displaced instrucion sequence reaches
break instruction, which is in wrong byte order.
Solution is to set tdep->xxx_breakpoint sequences in BE8 case (i.e
when gdbarch_byte_order_for_code is BFD_ENDIAN_BIG.
gdb/ChangeLog:
2014-11-02 Victor Kamensky <victor.kamensky@linaro.org>
* arm-linux-tdep.c (arm_linux_init_abi): Use
info.byte_order_for_code to choose endianity of breakpoint
instructions snippets.
This adds the 'regset' parameter to the iterator callback.
Consequently the 'regset_from_core_section' method is dropped for all
targets that provide the iterator method.
This change prepares for replacing regset_from_core_section
everywhere, thereby eliminating one gdbarch interface. Since the
iterator is usually no more complex than regset_from_core_section
alone, targets that previously didn't define core_regset_sections will
then gain multi-arch capable core file generation support without
increased complexity.
gdb/ChangeLog:
* gdbarch.sh (iterate_over_regset_sections_cb): Add regset
parameter.
* gdbarch.h: Regenerate.
* corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset
iterator.
(get_core_register_section): Add parameter 'regset' and use it, if
set. Add parameter 'min_size' and verify the bfd section size
against it.
(get_core_registers_cb): Add parameter 'regset' and pass it to
get_core_register section. For the "standard" register sections
".reg" and ".reg2", set an appropriate default for human_name.
(get_core_registers): Don't abort when the gdbarch has an iterator
but no regset_from_core_section. Add NULL/0 for parameters
'regset'/'min_size' in calls to get_core_register_section.
* linux-tdep.c (linux_collect_regset_section_cb): Add parameter
'regset' and use it instead of calling the
regset_from_core_section gdbarch method.
* i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'.
* i386-tdep.c (i386_supply_xstateregset)
(i386_collect_xstateregset, i386_xstateregset): Moved to
i386-linux-tdep.c.
(i386_regset_from_core_section): Drop handling for .reg-xfp and
.reg-xstate.
(i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic
core file support only if the regset iterator hasn't been set.
* i386-linux-tdep.c (i386_linux_supply_xstateregset)
(i386_linux_collect_xstateregset, i386_linux_xstateregset): New.
Moved from i386-tdep.c and renamed to *_linux*.
(i386_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation. Allow any .reg-xstate size when reading
from a core file.
* amd64-tdep.c (amd64_supply_xstateregset)
(amd64_collect_xstateregset, amd64_xstateregset): Moved to
amd64-linux-tdep.c.
(amd64_regset_from_core_section): Remove.
(amd64_init_abi): Set new tdep field 'fpregset'. No longer
install an amd64-specific regset_from_core_section gdbarch method.
* amd64-linux-tdep.c (amd64_linux_supply_xstateregset)
(amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New.
Moved from amd64-tdep.c and renamed to *_linux*.
(amd64_linux_iterate_over_regset_sections): Add regset parameter
to each callback invocation. Allow any .reg-xstate size when
reading from a core file.
* arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove.
(arm_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(arm_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove.
(ppc_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(ppc_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields
gregset, sizeof_gregset, fpregset, and sizeof_fpregset.
(s390_regset_from_core_section): Remove.
(s390_iterate_over_regset_sections): Add regset parameter to each
callback invocation.
(s390_gdbarch_init): No longer set the regset_from_core_section
gdbarch method. Drop initialization of deleted tdep fields.
The core_regset_sections list in gdbarch (needed for multi-arch
capable core file generation support) is replaced by an iterator
method. Overall, this reduces the code a bit, and it allows for more
flexibility.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_regset_sections): Remove.
(amd64_linux_iterate_over_regset_sections): New.
(amd64_linux_init_abi_common): Don't install the regset section
list, but the new iterator in gdbarch.
* arm-linux-tdep.c (arm_linux_fpa_regset_sections)
(arm_linux_vfp_regset_sections): Remove. Move combined logic...
(arm_linux_iterate_over_regset_sections): ...here. New function.
(arm_linux_init_abi): Set iterator instead of section list.
* corelow.c (get_core_registers_cb): New function, logic moved
from...
(get_core_registers): ...loop body here. Use new iterator method
instead of walking through the regset section list.
* gdbarch.sh: Remove 'core_regset_sections'. New method
'iterate_over_regset_sections'. New typedef
'iterate_over_regset_sections_cb'.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* i386-linux-tdep.c (i386_linux_regset_sections)
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
Remove.
(i386_linux_iterate_over_regset_sections): New.
(i386_linux_init_abi): Don't choose a regset section list, but
install new iterator in gdbarch.
* linux-tdep.c (struct linux_collect_regset_section_cb_data): New.
(linux_collect_regset_section_cb): New function, logic moved
from...
(linux_collect_thread_registers): ...loop body here. Use iterator
method instead of walking through list.
(linux_make_corefile_notes_1): Check for presence of iterator
method instead of regset section list.
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections)
(ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections)
(ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections)
(ppc64_linux_fp_regset_sections): Remove. Move combined logic...
(ppc_linux_iterate_over_regset_sections): ...here. New function.
(ppc_linux_init_abi): Don't choose from above regset section
lists, but install new iterator in gdbarch.
* regset.h (struct core_regset_section): Remove.
* s390-linux-tdep.c (struct gdbarch_tdep): Add new fields
have_linux_v1, have_linux_v2, and have_tdb.
(s390_linux32_regset_sections, s390_linux32v1_regset_sections)
(s390_linux32v2_regset_sections, s390_linux64_regset_sections)
(s390_linux64v1_regset_sections, s390_linux64v2_regset_sections)
(s390x_linux64_regset_sections, s390x_linux64v1_regset_sections)
(s390x_linux64v2_regset_sections): Remove. Move combined logic...
(s390_iterate_over_regset_sections): ...here. New function. Use
new tdep fields.
(s390_gdbarch_init): Set new tdep fields. Don't choose from above
regset section lists, but install new iterator.
Recent versions of glibc have assembled the signal trampoline code
as Thumb2, which causes gdb to misinterpret them and a number of
testsuite tests to fail. Educate gdb about these trampolines and
get the tests running again.
gdb/ChangeLog:
2014-07-28 Will Newton <will.newton@linaro.org>
* arm-linux-tdep.c (THUMB2_SET_R7_SIGRETURN1): New define.
(THUMB2_SET_R7_SIGRETURN2): Likewise.
(THUMB2_SET_R7_RT_SIGRETURN1): Likewise.
(THUMB2_SET_R7_RT_SIGRETURN2): Likewise.
(THUMB2_EABI_SYSCALL): Likewise.
(thumb2_eabi_linux_sigreturn_tramp_frame): Create new
struct tramp_frame.
(thumb2_eabi_linux_rt_sigreturn_tramp_frame): Likewise.
(arm_linux_init_abi): Add Thumb2 tramp frame unwinders.
In arm-tdep.c, arm_skip_stub is installed to gdbarch
skip_trampoline_code, but in arm-linux-tdep.c,
find_solib_trampoline_target is installed to skip_trampoline_code.
That means gdb configured for arm-linux target doesn't recognize some
arm specific trampolines or stubs. Beside handling generic solib
trampoline, gdb for arm-linux target should be able to handle arm
specific trampolines. This patch is to skip arm specific stubs, if
any, and as a fallback, skip the generic solib trampoline.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-linux-tdep.c (arm_linux_skip_trampoline_code): New.
(arm_linux_init_abi): Set skip_trampoline_code with
gdbarch_skip_trampoline_code instead of
find_solib_trampoline_target.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Continuing my series of fixes on the SystemTap SDT support for the
ARM/AArch64 architectures, this patch now extends how ARM's SDT specific
parser handles literal numbers (immediates).
Currently, it only accepts "#" as the prefix. However, according to
"info '(as) ARM-Chars'", expressions can also have "$" and nothing as a
prefix. This patch extends the parser to accept those options.
2013-12-28 Sergio Durigan Junior <sergiodj@redhat.com>
* arm-linux-tdep.c (arm_stap_is_single_operand): Accept "$" as a
literal prefix. Also accept no prefix at all.
(arm_stap_parse_special_token): Likewise.
(arm_linux_init_abi): Likewise.
This patch extends the current generic parser for SystemTap SDT probe
arguments. It can be almost considered a cleanup, but the main point of
it is actually to allow the generic parser to accept multiple prefixes
and suffixes for the its operands (i.e., integers, register names, and
register indirection).
I have chosen to implement this as a list of const strings, and declare
this list as "static" inside each target's method used to initialize
gdbarch.
This patch is actually a preparation for an upcoming patch for ARM,
which implements the support for multiple integer prefixes (as defined
by ARM's asm spec). And AArch64 will also need this, for the same
reason.
This patch was regtested on all architectures that it touches (i.e.,
i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found.
2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com>
* amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix, stap_integer_suffix)
(stap_register_prefix, stap_register_suffix)
(stap_register_indirection_prefix)
(stap_register_indirection_suffix): Declare as "const char *const
*" instead of "const char *". Adjust printing function. Rename
all of the variables to the plural.
(pstring_list): New function.
* i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* stap-probe.c (stap_is_generic_prefix): New function.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Remove unecessary declarations for
variables holding prefix and suffix information. Use the new
functions listed above for checking for prefixes and suffixes.
(stap_parse_single_operand): Likewise.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
Remove AT_HWCAP macro definintion as it is provided in
added include file.
* s390-tdep.c: Remove system header <elf.h>
Add "elf/common.h" header for AT_HWCAP definition.
(s390_core_read_description): Use correct CORE_ADDR
for hwcap local variable used as third parameter
of function target_auxv_search.
This time, it passes all the tests and comes with a nearly complete
XML file (plus a script that can nearly regenerate the XML file).
(I elected to leave out __ARM_NR_cmpxchg, since it has dire warnings
to the effect that the only pieces of code that should be aware of it
are the implementation and the __kuser_cmpxchg code in entry-armv.S.)
gdb/
2013-08-14 Samuel Bronson <naesten@gmail.com>
ARM Linux support for `catch syscall'.
* syscalls/arm-linux.py: New file.
* syscalls/arm-linux.xml: Likewise.
* arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
(arm_linux_init_abi): Register the new function and syscall xml file.
* data-directory/Makefile.in: Install the new syscall xml file.
* NEWS: Brag about this.
gdb/testsuite/
2013-08-14 Samuel Bronson <naesten@gmail.com>
ARM Linux support for `catch syscall'.
* gdb.base/catch-syscall.exp: Test this on ARM now.
(fill_all_syscalls_numbers): ARM has close/chroot on 6/61, too.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
As a follow up to:
http://sourceware.org/ml/gdb-patches/2013-03/msg00449.html
In a nutshell, casts between 'char **' <-> 'unsigned char **' and
'char **' <-> 'const char **' are invalid.
I grepped for "\*\*) &" and found these. There's another one in
demangle.c, but I've split fixing that one to a separate patch.
I think the ada_decode_symbol change is perhaps the one that could be
surprising. The function's description has this comment, which makes
things much clearer:
The GSYMBOL parameter is "mutable" in the C++ sense: logically
const, but nevertheless modified to a semantically equivalent form
when a decoded name is cached in it. */
const char *
ada_decode_symbol (const struct general_symbol_info *gsymbol)
With that out of the way, I think the patch ends up being pretty
obvious.
Tested on x86_64 Fedora 17.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
rather than casting 'const char * const *' to 'const char **'.
* ada-lex.l (processInt): Make "trailer" local const. Remove
'const char **' cast.
* arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
locals, and use those as strtol output pointer, instead than doing
invalid casts to from 'const char **' to 'char **'.
(_initialize_demangle): Remove cast.
* i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
locals, and use those as strtol output pointer, instead than doing
invalid casts to from 'const char **' to 'char **'.
* solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
casts.
* stap-probe.c (stap_parse_register_operand)
(stap_parse_single_operand): Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
set_gdbarch_process_record.
Initialize `arm_swi_record' field.
* arm-tdep.c (arm_process_record): New function.
(deallocate_reg_mem): New function.
(decode_insn): New function.
(thumb_record_branch): New function.
(thumb_record_ldm_stm_swi(): New function.
(thumb_record_misc): New function.
(thumb_record_ld_st_stack): New function.
(thumb_record_ld_st_imm_offset): New function.
(thumb_record_ld_st_reg_offset(): New function.
(thumb_record_add_sub_cmp_mov): New function.
(thumb_record_shift_add_sub): New function.
(arm_record_coproc_data_proc): New function.
(arm_record_coproc): New function.
(arm_record_b_bl): New function.
(arm_record_ld_st_multiple): New function.
(arm_record_ld_st_reg_offset): New function.
(arm_record_ld_st_imm_offset): New function.
(arm_record_data_proc_imm): New function.
(arm_record_data_proc_misc_ld_str): New function.
(arm_record_extension_space): New function.
(arm_record_strx): New function.
(sbo_sbz): New function.
(struct insn_decode_record): New structure for arm insn record.
(REG_ALLOC): New macro for reg allocations.
(MEM_ALLOC): New macro for memory allocations.
* arm-tdep.h (struct gdbarch_tdep): New field 'arm_swi_record'
Yao Qi
Simon Marchi
Joel Brobecker
Antoine Tremblay
Marcin Kościelnicki
Pedro Alves
Sergio Durigan Junior
Victor Kamensky
Andreas Arnez
Gary Benson
Will Newton
Yao Qi
Omair Javaid
Tom Tromey
Pierre Muller
Joel Brobecker
Pawandeep Oza