* breakpoint.c (delete_breakpoint): Pass mark_inserted to
remove_breakpoint, so that the subsequent test for
bpt->inserted will succeed, and duplicates will be fixed up.
a little more portable.
Don't use shell's echo command to put strings containing
escaped characeters into a file -- different flavors of /bin/sh
require differnt levels of escaping. Use cat <<EOF instead.
Our internal field separator is a colon. Change all
commands which assume it is a space.
(iterate_over_lwps): Make sure we can handle CALLBACK deleting the
LWP it's called for.
(lin_lwp_attach): Mark LWP as resumed to make sure the fake
SIGSTOP is reported.
(resume_clear_callback): New function.
(resume_set_callback): New function.
(lin_lwp_resume): Mark all LWP's that we're going to resume as
resumed, and unmark all others.
(status_callback): Only report a pending wait status if we pretend
that LP has been resumed.
(resumed_callback): New function.
(lin_lwp_wait): Add assertions to check that LWP's are properly
marked as resumed. Partially revert 2001-05-25 patch by Michael
Snyder: do not resume all threads. Add comment explaining the
problems associated with this bit of code.
* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
* gdb.threads/pthreads.exp (check_control_c): Return 0 for success,
non-zero if control_c fails. Terminate the test on failure,
rather than wait for 12 more tests to time out.
stopped due to a Ctrl-C as well as breakpoints.
* hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
support thread switches after Ctrl-C.
* lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
* linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
* m3-nat.c (mach3_prepare_to_proceed): Ditto.
instead of system-specific define's like _WIN32 and __MSDOS__.
Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
ROOTED_P.
(top-level): #include "filenames.h".
* solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
instead of SLASH_CHAR, ROOTED_P and SLASH_P.
(top-level): #include "filenames.h".
* defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
(SLASH_STRING): Define only for _WIN32.
* completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
__MSDOS_.
* cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
(top-level): #include "filenames.h".
* config/djgpp/fnchange.lst: Add two new files in the
gdb/testsuite/gdb.c++/ directory to the remapped names.
* config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
than requiring that all per-architecture data be registered before
the first gdbarch object is allocated.
* gdbarch.sh: Changes to effect the following:
* gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
declarations and definitions.
(check_gdbarch_data): New function, and declaration.
(gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
zero is good enough.
(free_gdbarch_data): Tolerate a null data pointer. Free only
those data items gdbarch->data actually has allocated.
(set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
(gdbarch_update_p): No need to call init_gdbarch_data.
* thread.c (delete_step_resume_breakpoint): New function.
Maintain internal consistency of the thread list while deleting
a step_resume_breakpoint.
* gdbthread.h (delete_step_resume_breakpoint): Export.
* breakpoint.c (bpstat_find_step_resume_breakpoint):
Make thread-aware: don't return a step_resume_breakpoint
for the wrong thread.
* infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
instead of delete_breakpoint_current_contents.
(fetch_inferior_event): Ditto.
(handle_inferior_event): Call delete_step_resume_breakpoint
instead of delete_breakpoint.
* infrun.c (handle_inferior_event): After singlestepping over a
thread-specific breakpoint, use currently_stepping() to decide
whether to step or continue.
* lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
to consume the SIGSTOP generated by PTRACE_ATTACH.
(stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
try again to get the SIGSTOP event.
(lin_lwp_wait): Resume all threads when ignoring a signal.
This will insure that newly attached threads get resumed.
* gdb.threads/linux-dp.exp: Remove assumptions about thread ordering.
Don't require that the main thread and the manager thread are the
first in the list.
* gdb.base/exprs.exp ("print unsigned short == (~0)"): Don't
assume that shorts are smaller than ints. On a 16-bit machine,
this isn't true.
("print unsigned char == (~0)"): Add test that verifies that ~0,
an int, is not equal to ~0 stored in an unsigned char. This tests
the same thing that the previous test meant to, but works on
16-bit machines, too.
("print unsigned char != (~0)"): Same test, complemented.
(gnu_pid_to_exec_file): Add PID parameter.
(set_sig_thread_cmd): Use PIDGET on return value from
thread_id_to_pid.
(proc_string): Use MERGEPID to construct argument to
pid_to_thread_id.
* gdb.threads/pthreads.exp (all_threads_running): Add an explicit
test for (full_coverage == 0). This makes the test run faster,
and prevents dejagnu getting out of step.
* gdb.base/callfuncs.exp: Make all test names unique.
* gdb.base/commands.exp: Make all test names unique.
* gdb.base/condbreak.exp: Make all test names unique.
* gdb.base/dbx.exp: Make all test names unique.
* gdb.base/default.exp: Make all test names unique.
* gdb.base/define.exp: Make all test names unique. Conform some FAIL
and TIMEOUT messages to their corresponding PASS message.
* gdb.base/ending-run.exp: Make all test names unique.
* gdb.base/long_long.exp: Remove duplicate test.
* thread-db.c: Allow for defunct zombie threads.
(attach_thread): Do not attempt to attach zombie thread.
(thread_db_thread_alive): Return false for defunct zombie thread.
(find_new_threads_callback): Don't add defunct zombie thread to list.
(Includes changes by Dan Berlin.)
* gnu-v3-abi.c: New file.
* minsyms.c: #include "value.h" and "cp-abi.h".
(install_minimal_symbols): Check the minimal symbol table for
symbols that look mangled in the V3 style, and select the V3 ABI
if we find any.
* Makefile.in (SFILES): Add gnu-v3-abi.c.
(COMMON_OBS): Add gnu-v3-abi.o.
(gnu-v3-abi.o): Add new rule.
(minsyms.o): Depend on $(cp_abi_h) and $(value_h).
Changes by Jim Ingham:
* values.c (value_change_enclosing_type): New function. If the
new enclosing type is larger than the old one, we need to allocate
more space.
* value.h: Add value_change_enclosing_type prototype.
* valops.c (value_cast): Use it.
(value_assign): Use it.
(value_addr): Use it.
(value_ind): Use it.
(value_full_object): Use it.
2001-05-07 Daniel Berlin <dan@cgsoftware.com>
* values.c (value_static_field): Handle static fields that have a constant value.
* remote.c (hex2bin): Make first argument const.
Require explicit count, don't accept null-terminated str.
(remote_resume, remote_async_resume): White space fix-up.
basename (NAME). The FreeBSD basename returns a pointer to a
static buffer, even if it's simply returning a string identical to
its argument.
(lookup_partial_symtab): Likewise.
* ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
(hardwire_setbaudrate): Set errno to EINVAL and return with error
if the conversion of the baud rate to code fails.
* config/gdbserver.exp (gdb_load): Handle the case
in which the arguments to gdbserver are given in the
baseboard configuration file.
Also handle the case in which the server needs to do a
load.
* remote.c (bin2hex, hex2bin): New functions. Factor out these
two conversions which are coded for repeatedly in this module.
(remote_threads_extra_info, remote_wait, remote_async_wait,
store_register_using_P, remote_store_registers, remote_write_bytes,
remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
of coding the conversions inline.
(fromhex): Not exported, change from extern to static.
and gdbtk-stack.o.
(SUBDIR_GDBTK_SRCS): Ditto for the sources.
(gdbtk-bp.o): New rule.
(gdbtk-register.o): New rule.
(gdbtk-stack.o): New rule.
(gdbtk-cmds.o): Update dependencies.
(gdbtk.o): Ditto.
(gdbtk-hooks.o): Ditto.
(gdbtk-varobj.o): Ditto.
* symfile.c (symbol_file_add_main_1): New static function.
Passes the flags arguments to symbol_file_add() and takes care
of any necessary reinitializations.
(symbol_file_command): Call symbol_file_add_main_1() instead of
symbol_file_add().
(symbol_file_add_main): Ditto.
* sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
conditional for help with connections through parallel ports,
given that the actual code for downloading through a parallel port
is not conditionalized.
* sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
unmaintaned, and probably on its way to obsolescence.
(i386_register_convertible): New function.
* config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
of i386_register_virtual_type.
(REGISTER_CONVERTIBLE): Redefine in terms of
i386_register_convertible.
(i386_register_virtual_type, i386_register_convertible): New
prototypes.
saves in general.
* config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
(enum movm_register_bits): New enum.
* mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
bits, not hex literals. Handle the `other', `exreg0', and
`exother' bits. Correct handling of `exreg1': it saves r4, r5,
r6, and r7, not r2, r3, r4, and r5.
(saved_regs_size): New function.
(mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
of computing the same thing inline, incorrectly.
stuff out into mn10300_pop_frame_regular, and use
generic_pop_current_frame. This lets us share code, and also
makes this function's prototype match that expected by gdbarch.
Make this function static.
(mn10300_pop_frame_regular): New function.
(mn10300_gdbarch_init): Register mn10300_pop_frame as the
gdbarch's pop_frame method.
* config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
(mn10300_pop_frame): Delete declaration.
mn10300_extract_return_value,
mn10300_extract_struct_value_address, mn10300_store_return_value,
mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
mn10300_frame_chain, mn10300_skip_prologue,
mn10300_push_arguments, mn10300_push_return_address,
mn10300_store_struct_return, mn10300_frame_saved_pc,
mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
Make these functions static; they should only be visible to the
outside world as gdbarch methods.
than the tm-*.h file.
* config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
Delete definitions. We register gdbarch methods for these now.
(struct frame_info, struct type, struct value): Delete forward
declarations of these types; they're no longer necessary, since we
don't have function declarations here any more.
* mn10300-tdep.c: #include "arch-utils.h", to get declarations for
some default gdbarch methods.
(mn10300_store_struct_return): Return void, as expected by
gdbarch.
(mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
as expected by gdbarch.
(mn10300_frame_init_saved_regs): Provide dummy definition for
this, as required by gdbarch.
(mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
by gdbarch. Register gdbarch methods or values for all the stuff
removed from tm-10300.h, listed above.
set up the display for testing.
(gdbtk_start): Convert all paths to paths that tcl will like.
Export target information to environment.
(_gdbtk_xvfb_init): New proc to start Xvfb if available and
necessary.
(_gdbtk_xvfb_exit): New proc to kill Xvfb if necessary.
(to_tcl_path): New proc to convert a given pathname into
a path acceptible as an argument to a tcl command.
(_gdbtk_export_target_info): New proc to export target info
into the environment for gdbtk testing.
(gdbtk_done): New proc to signal end-of-test.
* thread-db.c (keep_thread_db): Adjust comment.
(deactivate_target): Removed.
(thread_db_new_objfile): Don't call deactivate_target. Implement
guts of deactivate_target inline instead.
(attach_thread): Call ATTACH_LWP unconditionally if defined.
(thread_db_attach): New function.
(thread_db_detach): Don't call deactivate_target. Do necessary
cleanup inline instead. Set inferior_ptid to LWP corresponding to
the current user-level thread.
(thread_db_kill): Set inferior_ptid to LWP corresponding to the
current user-level thread.
(thread_db_create_inferior): Deactivate target vector if
KEEP_THREAD_DB is zero.
(thread_db_mourn_inferior): Don't call deactivate_target. Do
necessary cleanup inline instead.
(init_thread_db_ops): Initialize to_attach field to
thread_db_attach.
* lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
(stop_wait_callback): Add prototype.
(init_lwp_list): Add comment about when to re-initialize the LWP
list.
(lin_lwp_attach_lwp): Only call ptrace for cloned processes.
Avoid adding publicates to the LWP list. Only mark an LWP as
signalled if it doesn't correspond to a cloned process.
(lin_lwp_attach): Add initial process to the LWP list. Make sure
it's stopped and fake a SIGSTOP.
(detach_callback): New function.
(lin_lwp_detach): Implement.
(lin_lwp_create_inferior): Don't re-initialize LWP list here.
Call child_ops.to_create_inferior directly instead of via
target_beneath local.
(lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
directly instead of via target_beneath local.
instead of non-portable search for `/'. Use FILENAME_CMP instead
of STREQ, to account for case-insensitive filesystems.
(top-level): #include "filenames.h".
its address, to decide whether it's a watchpoint or not. Zero
is a valid code address.
(update_breakpoints_after_exec): Admonishing comments.
* breakpoint.h (struct breakpoint): Doc fixes.
* config/sid.exp (gdb_target_sid): Check for error messages.
On error or timeout, don't make expect exit (which will terminate
all subsequent tests); instead just make gdb exit.
(gdb_load): Check for error messages. On error or timeout,
return a negative value.
* sid.exp (sid_exit): Pass host, not target, to remote_close.
2001-01-25 matthew green <mrg@redhat.com>
* config/sid.exp (sid_start): Call `remote_push_conn' after firing
up sid.
(sid_exit): Call `remote_pop_conn' after GDB is gone.
2001-01-25 matthew green <mrg@redhat.com>
* config/sid.exp (sid_start): Use `remote_spawn' instead of `spawn.'
Deprecate $sid_spawn_id.
(sid_exit): Remove code necessary only for `spawn.'
2001-01-25 matthew green <mrg@redhat.com>
* config/sid.exp (sid_start): Handle sim,protocol of `sid.'
(rs6000_in_solib_return_trampoline): Declare.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
function.
(rs6000_skip_trampoline_code): Skip bigtoc fixup code.
* xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
check after the CSECT check rather than before it. Allocate
separate symtabs for CSECTs whose names begin with '@'.
(scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
Activate the misc_func_recorded mechanism for whose names begin
with '@'.
* sh-tdep.c: Get rid of the function prototypes.
(sh_sh4_build_float_register_type): Move earlier in file.
(fv_reg_base_num): Ditto.
(dr_reg_base_num): Ditto.
* thread-db.c: Revert 2001-04-26 change for debugging output.
* lin-lwp.c: Ditto.
* lin-lwp.c: Add set/show debug lin-lwp command. Use this
command to turn extra debugging output on / off.
(top-level): #include filenames.h.
* dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
FILENAME_CMP, to DTRT on non-Posix platforms.
(top-level): #include filenames.h.
* i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
typos in which hexadecimal constants were really intended to be
binary constants.
(i387_tag): Swap logic regarding zero vs non-zero exponents.
Abstract out operations specific to particular C++ ABI's, and
invoke them through a function table. This removes the C++ ABI
dependencies scattered throughout the code, and allows us to
cleanly add support for new C++ ABI's.
* cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
* c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
#include "cp-abi.h". These files all use functions now declared
there.
* symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
Deleted. These services are now provided by functions declared in
cp-abi.h.
* value.h (value_rtti_type, value_virtual_fn_field): Same.
* values.c (value_virtual_fn_field): Same, for this definition.
* valops.c (value_rtti_type): Same.
* c-typeprint.c (c_type_print_base): Use the functions from
"cp-abi.h", instead of the old macros, or hard-coded ABI-specific
tests.
* dbxread.c (record_minimal_symbol): Same.
* gdbtypes.c (get_destructor_fn_field, virtual_base_index,
virtual_base_index_skip_primaries): Same.
* jv-typeprint.c (java_type_print_base): Same.
* linespec.c (find_methods, decode_line_1): Same.
* symtab.c (gdb_mangle_name): Same.
* Makefile.in (SFILES): Add the new .c files mentioned above.
(cp_abi_h): New variable.
(COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
(cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
(c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
dependency on $(cp_abi_h).
* thread-db.c (_initialize_thread_db): Add set/show command
"debug-linux-threads" for debugging output.
* lin-lwp.c (various): Use global "debug_linux_threads to
turn on extra debugging output.
* config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
in terms of i386_frameless_function_invocation. Adjust comment.
(i386_frameless_function_invocation): New prototype.
* solib.c (no_shared_libraries): New function. Discard all symbols
from shared libraries.
(_initialize_solib): Add command "nosharedlibrary" as complement
to the command "sharedlibrary". Unloads symbols for all solibs.
* remote.c (remote_open_1): On opening the remote target, activate
the solib_create_inferior_hook, so that it can detect when the
target loads shared libraries.
(remote_async_open_1): Ditto.
(aix5_relocate_main_executable): Don't use file offsets for
determining corresponding sections and map file entries. Call
map_index_vs_section_name_okay() to do this instead.
From Adam Mirowski <Adam.Mirowski@Sun.COM>
Fixed Insight on Solaris. It was not possible to debug a process
because of EINTR "errors".
* procfs.c: (procfs_wait): if proc_wait_for_stop() fails
with EINTR, retry the call.
* arch-utils.c (default_prepare_to_proceed)
(generic_prepare_to_proceed): Added new functions.
* arch-utils.h: New function declarations for
default_prepare_to_proceed() and generic_prepare_to_proceed().
* gdbarch.sh: Added PREPARE_TO_PROCEED.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* inferior.h: Added get_last_target_status() declaration.
* infrun.c (get_last_target_status): Added new function.
(handle_inferior_event): Saves last pid and waitstatus, which will
get returned by get_last_target_status().
* hppa-tdep.c (prepare_to_proceed): Added comment stating that
prepare_to_proceed() is potentially redundant since
default_prepare_to_proceed() has been added.
* linux-thread.c (prepare_to_proceed): Ditto.
* lin-lwp.c (prepare_to_proceed): Ditto.
* m3-nat.c (prepare_to_proceed): Ditto.
From David Deephanphongs <deephan@telocity.com>
* inferior.h: Fix declarations of get_inferior_args and
set_inferior_args, which were missing the trailing 's'.
From Jimmy Guo <guo@cup.hp.com>
* top.c (init_main): set prompt if annotation_level>1,
this is necessary when annotation_level is set to 2 via
--annotate=2 command line option.
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
(set_remote_protocol_e_packet_cmd)
(set_remote_protocol_E_packet_cmd)
(show_remote_protocol_e_packet_command)
(show_remote_protocol_E_packet_command): New functions.
(init_all_packet_configs): Initialize remote_protocol_e and
remote_protocol_E.
(remote_resume, remote_async_resume): Support e/E command
packets.
(show_remote_cmd): Show state of remote_protocol_e and
remote_protocol_E.
(_initialize_remote): Add "set remote step-over-range-packet"
and "set remote step-over-range-w-signal-packet" to CLI.
-------------------------------------------------------------------
* config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
in terms of i386_extract_struct_value_address.
(i386_extract_struct_value_address): New prototype.
value to `unsigned long'. Change type of `value' to `unsigned
long'.
(i386_linux_dr_set): Change type of second argument to `unsigned
long'.
(i386_linux_dr_set_control): Change type of first argument to
`unsigned long'.
(i386_linux_dr_get_status): Change type of return value to
unsigned long.
* config/i386/nm-linux.h (i386_linux_dr_set_control,
i386_linux_dr_get_status): Adjust prototypes accordingly.
register before enabling it by setting the control register.
(i386_remove_aligned_watchpoint): Reset address register after
disabling it by setting the control register.
return value is TYPE_STRUCT and the number of fields is one, call
ourselves with TYPE set tp the type of the first field.
(i386_store_return_value): Likewise.
This fixes a problem with returning structs consisting of a single
`float' or `double' on *BSD.
a thread creation event for a thread that's already in the thread
list, since that may legitemately happen. Instead only call
attach_thread if it's not already in the thread list.
config/i386/nm-linux.h (including comment).
(i386_linux_frame_chain): New function implementing guts of the
former FRAME_CHAIN macro, but using read_memory_unsigned_integer
instead of read_memory_integer.
(i386_linux_frame_saved_pc): Removed doc pointing to
i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
now lives in this file.
* config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
i386-linux-tdep.c (including comment).
(FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
(i386_linux_frame_chain): New prototype.
make it work again.
(NUM_FREGS): Redefine to 0.
(NUM_REGS): Redefine as NUM_GREGS.
(i386_register_byte, i386_register_raw_size): Update from
i386-tdep.c. Add comment about their origin.
(regmap, register_u_addr): Take these from i386-linux-nat.c.
(i386_register_u_addr): Removed.
i386_linux_sigtramp_saved_sp): Make static.
(i386_linux_frame_saved_pc): New function based on the old
FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
of read_memory_integer.
* config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
(i386_linux_sigtramp_saved_pc): Remove prototype.
(FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
(i386_linux_frame_saved_pc): New prototype.
functions.
* config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
(STORE_STRUCT_RETURN): Redefine in terms of
i386_store_struct_return.
(i386_push_arguments, i386_store_struct_return): New prototypes.
* config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
definition was identical to the definition in "i386/tm-i386.h" so
the new definition should suffice too.
* ser-go32.c (rawclock): Remove prototype; include time.h instead.
(ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
(top level) <string.h>: Include gdb_string.h instead.
(dos_noop, dos_raw, dos_noflush_set_tty_state)
(dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
* go32-nat.c (go32_create_inferior): Move the declaration of
`environ' to here from the top level.
(top level) <_initialize_go32_nat>: Remove redundant prototype.
<gdb_string.h>: Include it instead of string.h.
(store_register): Call register_buffer instead of accessing
registers[] directly.
(redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
(redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
the function names at the start of the line.
(go32_set_dr): Throw internal_error if the argument is not a valid
debug register number.
(go32_open, go32_close, go32_attach, go32_detach, go32_resume)
(go32_wait, go32_xfer_memory, go32_files_info)
(go32_terminal_info): Remove ATTRIBUTE_UNUSED.
From Andrew Cagney <ac131313@redhat.com>
* coffread.c: Include "gdb_assert.h".
(coff_symtab_read): Cast the integer s_sclass to a long before
casting it to a pointer.
From Andrew Cagney <ac131313@redhat.com>
* coffread.c (coff_symtab_read): Initialize
``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
the ``.ef'' info.
* dbxread.c (find_text_range): Initialize ``start'' and ``end''.
xmrealloc): Move existing declarations to the one place and
re-order to be consistent.
(xmcalloc, xmfree): Declare.
(xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
declaration.
* utils.c (size_t): Delete #ifdef defining size_t.
(mmalloc, mrealloc, mcalloc, mfree): Re-order.
(mmalloc, mrealloc, mcalloc): Document as only calls in GDB
corresponding malloc, realloc, calloc.
(mfree): Call free directly.
(xmmalloc, xmrealloc): Clean up. Assume ISO-C.
(xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
function bodies to here.
(xcalloc, xfree): Call xmcalloc and xmfree respectfully.
and watchpoints on x86 targets.
* i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
[HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
(DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
appropriate value if not already defined.
(register_u_addr): New function.
(kernel_u_size): New function.
(i386_linux_dr_get, i386_linux_dr_set): New functions.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
* config/i386/nm-linux.h: Don't include "nm-i386v.h".
(I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
(TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
target_remove_watchpoint): Remove macros.
(i386_stopped_by_watchpoint, i386_insert_watchpoint,
i386_remove_watchpoint): Remove prototypes.
(register_u_addr): New prototype.
(REGISTER_U_ADDR): Define in terms of register_u_addr.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
(I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
* config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
i386-nat.o.
significant in *un*mangled method names. Use strcmp_iw to compare
them, not STREQ. (Fix from Daniel Berlin.)
* gdb/testsuite/gdb.c++/userdef.exp: Check that GDB tolerates whitespace in
unmangled operator names.
already defined.
From 2000-08-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>:
* stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
or a reference ('a') can be in a pseudo register.
* infcmd.c (do_registers_info): Must take into account the pseudo
registers to print their value.
(registers_info): Likewise.
* stack.c (frame_info): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
bfd_get_section_name.
(compare_sections_command): Ditto.
(remote_cisco_section_offsets): Make ``p'' a const pointer.
(compare_sections_command): Ditto for ``sectname''.
h8300_frame_args_address from frame_args_address.
(FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
from frame_locals_address.
(PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
from print_register_hook.
(h8300_frame_args_address): Declare.
(h8300_frame_find_saved_regs): Declare.
(h8300_frame_locals_address): Declare.
(h8300_frame_saved_pc): Declare.
(h8300_pop_frame): Declare.
(h8300_print_register_hook): Declare.
* h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
(h8300_frame_args_address): Renamed from frame_args_address.
(h8300_frame_locals_address): Renamed from frame_locals_address.
(h8300_pop_frame): Renamed from pop_frame.
(h8300_print_register_hook): Renamed from print_register_hook.
-------------------------------------------------------------------
file -- to prevent failing when the compile fails but we have no
intention of running the tests anyway.
* gdb.base/long_long.exp: Test target_info for no_long_long, skip
tests if set.
* gdb.base/maint.exp: Support 2 byte integers as well as 4 byte
integers.
* gdb.c++/ctti.exp: Skip tests if skip_cplus_tests returns true.
* gdb.c++/namespace.exp: Ditto.
Fix PR gdb/16.
handle the situation where the argument is an integer, not an
address -- arguably the most common case. This matters on
targets where pointers and addresses are different.
floatformat_is_nan and floatformat_mantissa.
* utils.c: Include "gdb_assert.h".
(floatformat_is_negative): New function.
(floatformat_is_nan): New function.
(floatformat_mantissa): New function.
* valprint.c: Include "floatformat.h".
(print_floating): Get rid of the Linux-specific
TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
help these new functions. Print NaN's in a format conforming to
ISO C99.
which define include paths used when compiling.
* util.c (savestring, msavestring): Change type of length argument.
* defs.h (savestring, msavestring): Update to match.
