* config/i386/cygwin32.mh: because cygwin.dll calls malloc/realloc
to allocate memory for environ space, gdb cannot use memory
checks -- set -DNO_MMCHECK
addresses to be odd.
(MIPS_FPU_SINGLE_REGSIZE, MIPS_FPU_DOUBLE_REGSIZE): Define.
* mips-tdep.c (mips_extract_return_value): Doubles aren't
returned in FP0 if FP registers are single-precision only.
start-sanitize-r5900
* config/mips/tm-r5900.h (MIPS_LAST_FP_ARG_REGNUM): Redefine
to disable use of FP registers for function arguments.
end-sanitize-r5900
member for storing offset of MIPS16 frame pointer from SP.
* mips-tdep.c: Use RA_REGNUM instead of hardcoded 31 throughout.
(PROC_FRAME_ADJUST): Define.
(mips16_heuristic_proc_desc): Store frame pointer adjustment value.
(get_frame_pointer): Use frame pointer adjustment value when
calculating frame address.
* remote-sim.c (gdbsim_fetch_register): Don't fetch registers
that have a null or empty name.
start-sanitize-tx19
* config/mips/tm-tx19.h (MIPS_DEFAULT_FPU_TYPE): Define.
(REGISTER_NAMES): Redefine to eliminate FP registers.
* config/mips/tm-tx19l.h: Ditto.
end-sanitize-tx19
source files.
* breakpoint.c (resolve_sal_pc): Prevent crash when pc isn't
associated with a function.
* buildsym.c (record_line start_symtab end_symtab): Don't delete
symtabs which only have line numbers (but no other debug symbols).
* dbxread.c (read_dbx_symtab end_psymtab): Ditto.
* remote-sim.c: New functions gdbsim_insert/remove_breakpoint. Use
intrinsic simulator breakpoints if available, otherwise do it the
hard way.
* configure.tgt: Add d30v.
* d30v-tdep.c: New file.
* config/d30v/d30v.mt, config/d30v/tm-d30v.h: New files.
(end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol.
* elfread.c (elf_symtab_read): If ELF symbol is "special",
such as a MIPS16 function, mark minimal symbol as special too.
* mips-tdep.c (pc_is_mips16): New function to check whether
a function is MIPS16 by looking at the minimal symbol. Use
pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro.
* config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL,
MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing
"special" MIPS16 bit in ELF and minimal symbols.
* mdebugread.c (parse_partial_symbols): Don't construct a partial
symbol table for a file that already has one.
start-sanitize-tx19
* configure.tgt: Support TX19.
* config/mips/tm-tx19.h, config/mips/tm-tx19l.h, config/mips/tx19.mt,
config/mips/tx19l.mt: New files for TX19.
end-sanitize-tx19
* config/powerpc/ppc-eabi.mt:
* config/powerpc/ppc-sim.mt:
* config/powerpc/ppcle-eabi.mt:
* config/powerpc/ppcle-sim.mt: ser-ocd.c needs to be before
other ocd-related files in TDEPFILES
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): macro
BDM_BREAKPOINT already has braces around it, remove erroneous ones.
* ser-ocd.c (ocd_write): conditionalize on _WIN32 instead of
__CYGWIN32__
* config/powerpc/tm-ppc-eabi.h: remove BDM_NUM_REGS, BDM_REGMAP
* ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file,
fill in doc fields of bdm_ppc_ops.
(bdm_ppc_fetch_registers): don't ask for invalid registers such
as the MQ or floating point regs not present on ppc 8xx boards
(bdm_ppc_store_registers): don't write those same invalid registers
* config/i386/cygwin32.mh: stop including ocd.o ser-ocd.o
* config/powerpc/ppc-eabi.mt:
* config/powerpc/ppcle-eabi.mt:
* config/powerpc/ppc-sim.mt:
* config/powerpc/ppcle-sim.mt: include ser-ocd.o
* config/tic80/tic80.mt:
(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
(SIM): Remove -lm to prevent make errors.
* configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
* gdbserver/utils.c (error): Change prototype to match defs.h.
* gdbserver/low-sim.c: Change simulator calls to use new interface.
* remote.c (remote_write_bytes): Include '$' at start of packet
and checksum at end of packet in overhead calculation.
(dll_do_command): New static variable if _WIN32.
(ocd_open): Set dll_do_command if _WIN32.
(ocd_write): Use dll_do_command rather than do_command.
* config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
(BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
($(BDM_LIBNAME)): Remove target.
* wigglers.def: Remove.
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
whether CRLF_SOURCE_FILES is defined.
(open_source_file): Use OPEN_MODE with open and openp.
(print_source_lines): Use FDOPEN_MODE with fdopen. If
CRLF_SOURCE_FILES is defined, ignore \r characters.
(forward_search_command): Use FDOPEN_MODE with fdopen.
(reverse_search_command): Likewise.
* config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define.
(LSEEK_NOT_LINEAR): Don't define.
stepping over an instruction that triggered a watchpoint.
* remote-mips.c: Numerous changes to support hardware breakpoints
and watchpoints on LSI MiniRISC and TinyRISC boards.
* mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h.
(mips_breakpoint_from_pc): Account for different breakpoint
instructions used by PMON and IDT monitor.
* config/mips/tm-embed.h: Enable hardware breakpoints on embedded
MIPS targets.
* config/mips/tm-mips.h: Define breakpoint instructions for
PMON and IDT monitor. Move MIPS16-related macros here from
mips-tdep.c.
ChangeLog sh-tdep.c config/sh/tm-sh.h
* config/sh/tm-sh.h: add define for FPSCR_REGNUM
* sh-tdep.c (sh_show_regs): print out all registers for
the current processor
