This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
This reverts part of the earlier version.in change. It moves
version.in back to the gdb directory. This works around the CVS bug
we've found.
gdb
* Makefile.in (version.c): Use version.in, not
common/version.in.
* common/create-version.sh: Likewise.
* common/version.in: Move...
* version.in: ...here.
gdb/doc
* Makefile.in (version.subst): Use version.in, not
common/version.in.
* gdbint.texinfo (Versions and Branches, Releasing GDB):
Likewise.
gdb/gdbserver
* Makefile.in (version.c): Use version.in, not
common/version.in.
sim/common
* Make-common.in (version.c): Use version.in, not
common/version.in.
* create-version.sh: Likewise.
sim/ppc:
* Make-common.in (version.c): Use version.in, not
common/version.in.
This change is required now that gdb/version.in has been moved to
gdb/common/version.in and now that the date needs to be fetched
from bfd/version.h.
sim/common/ChangeLog:
* create-version.sh: New script. Adapted from
gdb/commong/create-version.sh.
* Make-common.in (version.c): Update rule dependencies,
and re-implement using create-version.sh.
sim/ppc/ChangeLog:
* Makefile.in (srccom): New variable.
(version.c): Update rule dependencies, and re-implement using
sim/common/create-version.sh.
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
* acinclude.m4: Add SIM_DV_SOCKSER_O which is empty on hosts
which do not support dv-sockser.o. Add always as option to
first argument to SIM_AC_OPTION_HARDWARE. Fail if hardware
is always required to be enabled by simulator.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* wrapper.c: Include config.h before system header files.
* callback.c: Include config.h before system header files.
* cgen-trace.c: Likewise.
* cgen-utils.c: Likewise.
* gentmap.c: Likewise.
* sim-if.c: Include config.h before system header files.
* compile.c: Include config.h before system header files.
* sim-main.h: Likewise.
* gdb-if.c: Include config.h before system header files.
* load.c: Likewise.
* syscalls.c: Likewise.
* trace.c: Likewise.
* interp.c: Include config.h before system header files.
The common code has a sim_core_trans_addr() helper that only the m32r code
uses. Move the inline extern in the m32r code to the proper common header.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim code gets the logic for SIM_AC_OPTION_WARNINGS from gdb, but
it hasn't been updated in a good long while. Sync with the latest
gdb code.
There is a sim specific change in here: we disable -Werror for now.
This is because all sim code atm contains warnings. Will probably
have to slowly add a white list of targets which can tolerate this
until everyone is updated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This isn't entirely correct in that it assumes the signal numbering of
the target and host match, but seeing as we already make that assumption
in a few places, this patch doesn't make the situation any worse.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Trying to run `headers` in an out-of-tree build fails atm due to the
relative srcdir paths being used in a location other than where they
were setup to be used from. Get abs_srcdir from configure and use
that instead where applicable.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Building the sim on a sparc-solaris 2.8 machine fails when configured
with no extra sim hardware:
> for hw in ; do \
> echo "extern const struct hw_descriptor
> dv_${hw}_descriptor[];" ; \
> done >> tmp-hw.h
> echo 'const char version[] = "'"`sed q
> /[...]/../../gdb/version.in`"'";'
> >> version.c-tmp
> /bin/sh: -c: line 1: syntax error near unexpected token `;'
> /bin/sh: -c: line 1: `for hw in ; do \'
> make[3]: *** [hw-config.h] Error 2
The same thing happens with the version of bash that we got from
Sun as well (which is very old: 2.03.0(1)-release).
The problems comes from the fact that both shells are buggy, and
reject the following script:
for hw in ; do
[...]
done
The above is what sim/common/Makefile.in tries to execute when
generating hw-config.h.
In order to allow users to build out of the box on these machines,
this patch works around this bug. It does rely on the fact that
none of the tokens in SIM_HW contain whitespaces.
sim/common/ChangeLog:
* Make-common.in (hw-config.h): Work around bug in Solaris 2.8
system bourne shell.
The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space. So rename and export it
for other people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some systems (like OS X) do not have posix_fallocate. Add a configure
check for it before we try to use it. This is less work than trying
to support old systems.
URL: http://sourceware.org/bugzilla/show_bug.cgi?id=13161
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The dv-cfi code uses the bool type but doesn't include the stdbool.h
header. I didn't notice for Blackfin targets as the core Blackfin
header will include stdbool.h, but most targets don't do this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The "devices.h" header is Blackfin-specific, so trying to build dv-cfi
for any other target fails. Include the specific hw headers this file
needs directly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Seems some fixes were added to the common.m4 file but not the
SIM_AC_COMMON macro. Keep the two in sync since they're supposed
to be the same thing.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim_args_command prototype is in sim-options.h, so pull it in
directly rather than assuming a common header does it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Shell code before AC_INIT will be silently culled, and since the common
aclocal.m4 includes inline shell code, the file cannot be included before
AC_INIT. So update the example to show people including the file after
that rather than before to avoid random breakage.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The autoconf guys point out that our usage of AC_PROG_CC in the
SIM_AC_COMMON does not jive with their intended use.
http://www.gnu.org/software/autoconf/manual/autoconf.html#Expanded-Before-Required
So utilize AC_REQUIRE to make the warnings go away and generate
the correct code with different autoconf versions.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current --sysroot parsing attempts to keep from leaking memory by
treating the empty string specially (sine this is the initial value),
but it ends up leaking memory when the arg is an empty string. So if
someone uses --sysroot "", the old value is leaked, as is the new one.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
