Currently, even when built with --enable-build-with-cxx, gdb uses
CFLAGS instead of CXXFLAGS. This commit fixes it.
CXXFLAGS set in the environment when configure was run is now honored
in the generated gdb/Makefile, and you can also override CXXFLAGS in
the command like at make time, with the usual 'make CXXFLAGS="..."'
Objects built with a C compiler (e.g., gnulib) still honor CFLAGS
instead.
gdb/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS, CXXFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use COMPILER_CFLAGS instead of CFLAGS.
* configure: Regenerate.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
This patch is in preparation for software single step support on ARM in
GDBServer. It adds a new shared function regcache_raw_read_unsigned and
regcache_raw_get_unsigned so that GDB and GDBServer can use the same call
to fetch a raw register into an integer.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(COMMON_OBS): Append common/common-regcache.o.
(common-regcache.o): New rule.
* common/common-regcache.h (register_status) New enum.
(regcache_raw_read_unsigned): New declaration.
* common/common-regcache.c: New file.
* regcache.h (enum register_status): Move to common-regcache.h.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_get_unsigned): Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(OBS): Append common-regcache.o.
(common-regcache.o): New rule.
* regcache.c (init_register_cache): Initialize cache to
REG_UNAVAILABLE.
(regcache_raw_read_unsigned): New function.
* regcache.h (REG_UNAVAILABLE, REG_VALID): Replaced by shared
register_status enum.
i386-nat.[hc] got renamed to x86-nat.[hc] a while back, but somehow
3 references to the old file name remained past the renaming. This
fixes all of them.
gdb/ChangeLog (with Mike Stump <mikestump@comcast.net>):
* Makefile.in (TAGS): Replace i386-nat.h by x86-nat.h.
* x86-nat.c: Replace remaining references to i386-nat
by reference to x86-nat instead.
ARM can have multiple breakpoint types based on the instruction set
it's currently in: arm, thumb or thumb2.
GDBServer needs to know what breakpoint is to be inserted at location
when inserting a breakpoint.
This is handled by the breakpoint_kind_from_pc and sw_breakpoint_from_kind
target ops introduced in a previous patch, this patch adds the
arm_breakpoint_kind_from_pc and arm_sw_breakpoint_from_kind implementation so
that the proper breakpoint type is returned based on the pc.
Also in order to share some code with GDB a new file called arm.c have been
introduced in arch/.
While this file does not contain much yet future patches will add more
to it thus the inclusion at this stage.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in: Add arm.c/o.
* arch/arm.c: New file.
* arch/arm.h: (IS_THUMB_ADDR): Move macro from arm-tdep.c.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* arm-tdep.c (int thumb_insn_size): Move to arm.c.
(IS_THUMB_ADDR): Move to arm.h.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* configure.tgt: Add arm.o to all ARM configs.
gdb/gdbserver/ChangeLog:
* Makefile.in: Add arm.c/o.
* configure.srv: Likewise.
* linux-arm-low.c (arm_breakpoint_kinds): New enum.
(arm_breakpoint_kind_from_pc): New function.
(arm_sw_breakpoint_from_kind): Return proper kind.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize.
This patch moves the following functions into the arch/ common
directory, in new files arch/aarch64-insn.{h,c}. They are prefixed with
'aarch64_':
- aarch64_decode_adrp
- aarch64_decode_b
- aarch64_decode_cb
- aarch64_decode_tb
We will need them to implement fast tracepoints in GDBserver.
For consistency, this patch also adds the 'aarch64_' prefix to static
decoding functions that do not need to be shared right now.
V2:
make sure the formatting issues propagated
fix `gdbserver/configure.srv'.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-insn.o.
(HFILES_NO_SRCDIR): Add arch/aarch64-insn.h.
(aarch64-insn.o): New rule.
* configure.tgt (aarch64*-*-elf): Add aarch64-insn.o.
(aarch64*-*-linux*): Likewise.
* arch/aarch64-insn.c: New file.
* arch/aarch64-insn.h: New file.
* aarch64-tdep.c: Include arch/aarch64-insn.h.
(aarch64_debug): Move to arch/aarch64-insn.c. Declare in
arch/aarch64-insn.h.
(decode_add_sub_imm): Rename to ...
(aarch64_decode_add_sub_imm): ... this.
(decode_adrp): Rename to ...
(aarch64_decode_adrp): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_b): Rename to ...
(aarch64_decode_b): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_bcond): Rename to ...
(aarch64_decode_bcond): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_br): Rename to ...
(aarch64_decode_br): ... this.
(decode_cb): Rename to ...
(aarch64_decode_cb): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_eret): Rename to ...
(aarch64_decode_eret): ... this.
(decode_movz): Rename to ...
(aarch64_decode_movz): ... this.
(decode_orr_shifted_register_x): Rename to ...
(aarch64_decode_orr_shifted_register_x): ... this.
(decode_ret): Rename to ...
(aarch64_decode_ret): ... this.
(decode_stp_offset): Rename to ...
(aarch64_decode_stp_offset): ... this.
(decode_stp_offset_wb): Rename to ...
(aarch64_decode_stp_offset_wb): ... this.
(decode_stur): Rename to ...
(aarch64_decode_stur): ... this.
(decode_tb): Rename to ...
(aarch64_decode_tb): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(aarch64_analyze_prologue): Adjust calls to renamed functions.
gdb/gdbserver/ChangeLog:
* Makefile.in (aarch64-insn.o): New rule.
* configure.srv (aarch64*-*-linux*): Add aarch64-insn.o.
This adds an object oriented replacement for the "struct continuation"
mechanism, and converts the stepping commands (step, next, stepi,
nexti) and the "finish" commands to use it.
It adds a new thread "class" (struct thread_fsm) that contains the
necessary info and callbacks to manage the state machine of a thread's
execution command.
This allows getting rid of some hacks. E.g., in fetch_inferior_event
and normal_stop we no longer need to know whether a thread is doing a
multi-step (e.g., step N). This effectively makes the
intermediate_continuations unused -- they'll be garbage collected in a
separate patch. (They were never a proper abstraction, IMO. See how
fetch_inferior_event needs to check step_multi before knowing whether
to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.)
The target async vs !async uiout hacks in mi_on_normal_stop go away
too.
print_stop_event is no longer called from normal_stop. Instead it is
now called from within each interpreter's normal_stop observer. This
clears the path to make each interpreter print a stop event the way it
sees fit. Currently we have some hacks in common code to
differenciate CLI vs TUI vs MI around this area.
The "finish" command's FSM class stores the return value plus that
value's position in the value history, so that those can be printed to
both MI and CLI's streams. This fixes the CLI "finish" command when
run from MI -- it now also includes the function's return value in the
CLI stream:
(gdb)
~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n"
~"35\t}\n"
+~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
-FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output
+PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add thread-fsm.o.
* breakpoint.c (handle_jit_event): Print debug output.
(bpstat_what): Split event callback handling to ...
(bpstat_run_callbacks): ... this new function.
(momentary_bkpt_print_it): No longer handle bp_finish here.
* breakpoint.h (bpstat_run_callbacks): Declare.
* gdbthread.h (struct thread_info) <step_multi>: Delete field.
<thread_fsm>: New field.
(thread_cancel_execution_command): Declare.
* infcmd.c: Include thread-fsm.h.
(struct step_command_fsm): New.
(step_command_fsm_ops): New global.
(new_step_command_fsm, step_command_fsm_prepare): New functions.
(step_1): Adjust to use step_command_fsm_prepare and
prepare_one_step.
(struct step_1_continuation_args): Delete.
(step_1_continuation): Delete.
(step_command_fsm_should_stop): New function.
(step_once): Delete.
(step_command_fsm_clean_up, step_command_fsm_async_reply_reason)
(prepare_one_step): New function, based on step_once.
(until_next_command): Remove step_multi reference.
(struct return_value_info): New.
(print_return_value): Rename to ...
(print_return_value_1): ... this. New struct return_value_info
parameter. Adjust.
(print_return_value): Reimplement as wrapper around
print_return_value_1.
(struct finish_command_fsm): New.
(finish_command_continuation): Delete.
(finish_command_fsm_ops): New global.
(new_finish_command_fsm, finish_command_fsm_should_stop): New
functions.
(finish_command_fsm_clean_up, finish_command_fsm_return_value):
New.
(finish_command_continuation_free_arg): Delete.
(finish_command_fsm_async_reply_reason): New.
(finish_backward, finish_forward): Change symbol parameter to a
finish_command_fsm. Adjust.
(finish_command): Create a finish_command_fsm. Adjust.
* infrun.c: Include "thread-fsm.h".
(clear_proceed_status_thread): Delete the thread's FSM.
(infrun_thread_stop_requested_callback): Cancel the thread's
execution command.
(clean_up_just_stopped_threads_fsms): New function.
(fetch_inferior_event): Handle the event_thread's should_stop
method saying the command isn't done yet.
(process_event_stop_test): Run breakpoint callbacks here.
(print_stop_event): Rename to ...
(print_stop_location): ... this.
(restore_current_uiout_cleanup): New function.
(print_stop_event): Reimplement.
(normal_stop): No longer notify the end_stepping_range observers
here handle "step N" nor "finish" here. No longer call
print_stop_event here.
* infrun.h (struct return_value_info): Forward declare.
(print_return_value): Declare.
(print_stop_event): Change prototype.
* thread-fsm.c: New file.
* thread-fsm.h: New file.
* thread.c: Include "thread-fsm.h".
(thread_cancel_execution_command): New function.
(clear_thread_inferior_resources): Call it.
* cli/cli-interp.c (cli_on_normal_stop): New function.
(cli_interpreter_init): Install cli_on_normal_stop as normal_stop
observer.
* mi/mi-interp.c: Include "thread-fsm.h".
(restore_current_uiout_cleanup): Delete.
(mi_on_normal_stop): If the thread has an FSM associated, and it
finished, ask it for the async-reply-reason to print. Always call
print_stop_event here, regardless of the top-level interpreter.
Check bpstat_what to tell whether an asynchronous breakpoint hit
triggered.
* tui/tui-interp.c (tui_on_normal_stop): New function.
(tui_init): Install tui_on_normal_stop as normal_stop observer.
gdb/testsuite/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-cli.exp: Add CLI finish tests.
After the last gnulib import (Dec 2012), gnulib upstream started
replacing mingw's 'struct timeval' with a version with 64-bit time_t,
for POSIX compliance:
commit f8e84098084b3b53bc6943a5542af1f607ffd477
Author: Bruno Haible <bruno@clisp.org>
Date: Sat Jan 28 18:12:10 2012 +0100
sys_time: Override 'struct timeval' on some native Windows platforms.
See:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00372.html
However, that results in conflicts with native Winsock2's 'select':
select()'s argument
http://sourceforge.net/p/mingw-w64/mailman/message/29610438/
... and libiberty's timeval-utils.h timeval_add/timeval_sub, at the
least.
We don't really need the POSIX compliance, so this patch prepares us
to simply not use gnulib's 'struct timeval' replacement once a more
recent gnulib is imported, thus preserving the current behavior, by
adding a sys/time.h wrapper header that undefs gnulib's replacements,
and including that everywhere instead.
The SIZE -> OSIZE change is necessary because newer gnulib's
sys/time.h also includes windows.h/winsock2.h, which defines a
conflicting SIZE symbol.
Cross build-tested mingw-w64 32-bit and 64-bit.
Regtested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
* common/gdb_sys_time.h: New file.
* event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
* gdb_select.h: Likewise.
* gdb_usleep.c: Likewise.
* maint.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.h: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote.c: Likewise.
* ser-base.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* symfile.c: Likewise.
* symfile.c: Likewise. Rename OSIZE to SIZE throughout.
* target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
* utils.c: Likewise.
gdb/gdbserver/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* debug.c: Include gdb_sys_time.h instead of sys/time.h.
* event-loop.c: Likewise.
* remote-utils.c: Likewise.
* tracepoint.c: Likewise.
Ref: https://sourceware.org/ml/gdb/2015-07/msg00011.html
All of these targets use gdb/monitor.c, which has bit rotted
years ago (I'd guess around ~6), and nobody seems to
have noticed:
| target | source |
|----------------+----------------------|
| target dbug | gdb/dbug-rom.c |
| target picobug | gdb/microblaze-rom.c |
| target dink32 | gdb/dink32-rom.c |
| target m32r | gdb/m32r-rom.c |
| target mon2000 | gdb/m32r-rom.c |
| target ppcbug | gdb/ppcbug-rom.c |
This deletes them, along with finally removing monitor.c.
A manual update will be done separately.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* NEWS: Mention removed support for the various ROM monitors.
* Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
* configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
gdb_target_obs.
(m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
gdb_target_obs.
(microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
dsrec.o from gdb_target_obs.
(microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
from gdb_target_obs.
(powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
gdb_target_obs.
(powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
dink32-rom.o from gdb_target_obs.
(sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
(sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
* dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
In D, there is the notion of modules, and importing from one to the other,
whether it is a basic, selective or renamed import declaration.
module A;
import X;
void foo() {
import Y : bar;
}
If the compiler emits DW_TAG_imported_declaration at the appropriate locations,
then we can make use of what gdb stores in using_direct when performing
nonlocal symbol lookups.
gdb/ChangeLog
* Makefile.in (SFILES): Add d-namespace.c.
(COMMON_OBS): Add d-namespace.o.
* d-lang.c (d_language_defn): Use d_lookup_symbol_nonlocal as the
la_lookup_symbol_nonlocal callback function pointer.
* d-lang.h (d_lookup_symbol_nonlocal): New declaration.
(d_lookup_nested_symbol): New declaration.
* d-namespace.c: New file.
Consider the following declaration:
function Foo (I : Integer) return Integer renames Pack.Bar;
As Foo is not materialized as a routine whose name is derived from Foo,
GDB currently cannot use it:
(gdb) print foo(0)
No definition of "foo" in current context.
However, compilers can emit DW_TAG_imported_declaration in order to
materialize the fact that Foo is actually another name for Pack.Bar.
This commit enhances the DWARF reader to record global renamings (it
used to put global ones in a static block) and enhances the Ada engine
to leverage this information during symbol lookup.
gdb/ChangeLog:
* ada-lang.c: Include namespace.h
(aux_add_nonlocal_symbols): Fix a function name in comment.
(ada_add_block_renamings): New.
(add_nonlocal_symbols): Add global renamings handling.
(ada_lookup_symbol_list_worker): Move the symbol lookup part
to...
(ada_add_all_symbols): ... this new function.
(ada_add_block_symbols): Try to match the input name against the
"using directives list", perform a recursive symbol lookup on
the matched declarations.
* block.h (struct block): Move the_namespace to top-level as
namespace_info. Remove the language_specific field.
(BLOCK_NAMESPACE): Update access to the namespace_info field.
* buildsym.h (using_directives): Rename into...
(local_using_directives): ... this.
(global_using_directives): New.
(struct context_stack): Rename the using_directives field into
local_using_directives.
* buildsym.c (finish_block_internal): Deal with the proper
using directives repository (local or global).
(prepare_for_building): Reset local_using_directives. Assert
that there is no pending global using directive.
(reset_symtab_globals): Reset global_using_directives and
local_using_directives.
(end_symtab_get_static_block): Don't ignore symtabs that have
only using directives.
(push_context): Update references to local_using_directives.
(buildsym_init): Do not reset using_directives.
* cp-support.c: Include namespace.h.
* cp-support.h (struct using_direct): Move to namespace.h.
(cp_add_using_directives): Move to namespace.h.
* cp-namespace.c: Include namespace.h
(cp_add_using_directive): Move to namespace.c, rename it to
add_using_directive, add a "using_directives" argument and use
it as the pending using directives repository. All callers
updated.
* dwarf2read.c (using_directives): New.
(read_import_statement): Call using_directives.
(read_func_scope): Update references to local_using_directives.
(read_lexical_block_scope): Likewise.
(read_namespace): Update the heading comment, call
using_directives.
* namespace.h: New file.
* namespace.c: New file.
* Makefile.in (SFILES): Add namespace.c.
(COMMON_OBS): Add namespace.o
gdb/testsuite/ChangeLog:
* gdb.ada/fun_renaming.exp: New testcase.
* gdb.ada/fun_renaming/fun_renaming.adb: New file.
* gdb.ada/fun_renaming/pack.adb: New file.
* gdb.ada/fun_renaming/pack.ads: New file.
Tested on x86_64-linux. Support for this in GCC is in the pipeline: see
<https://gcc.gnu.org/ml/gcc-patches/2015-07/msg02166.html>.
This patch introduces the new breakpoint/"linespec" API based on
a new struct event_location. This API currently only supports
traditional linespecs, maintaining the status quo of the code base.
Future patches will add additional functionality for other location
types such as address locations.
gdb/ChangeLog:
* Makefile.in (SFILES): Add location.c.
(HFILES_NO_SRCDIR): Add location.h.
(COMMON_OBS): Add location.o.
* linespec.c (linespec_lex_to_end): New function.
* linespec.h (linespec_lex_to_end): Declare.
* location.c: New file.
* location.h: New file.
This patch moves ARM register numbers enum to arch/arm.h, so that it
can used by GDBserver too.
This patch also creates a new directory gdb/arch in which arch-specific
or target-specific files are placed.
gdb:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.h (enum gdb_regnum): Move it to ...
* arch/arm.h: ... here. New file.
* Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
I happen to see REMOTE_EXAMPLES isn't used anywhere, so this patch
removes it.
REMOTE_EXAMPLES was added in the following commit in 1991,
commit 86bbb439c8
Author: John Gilmore <gnu@cygnus>
Date: Fri May 3 19:57:13 1991 +0000
There should be a Makefile in the cvs main directory, configured
for "./config.gdb none", so that things like "make tags" and "make tar"
will work.
and it was used like:
TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
However TARFILES was removed by the change latter in 1994,
Tue Aug 16 15:24:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* symtab.c (decode_line_1): If funfirstline and we get a
non-LOC_BLOCK symbol (e.g. variable or type), then error().
* Makefile.in (TARFILES, NONSRC, SFILES_STAND, SFILES_KGDB):
Remove; unused.
Since then, REMOTE_EXAMPLES is not used any more.
gdb:
2015-07-27 Yao Qi <yao.qi@linaro.org>
* Makefile.in (REMOTE_EXAMPLES): Remove it.
When I look at test fails related to watchpoint on aarch64-linux,
I find there are some code duplicates between GDB and GDBserver.
This patch is to move some of them to a nat/aarch64-linux-hw-point.{h,c}.
The only change I do is about the dr_changed_t typedef, which was
ULONGEST in GDB and 'unsigned long long' in GDBserver. Each bit
of dr_changed_t represents a status of each HW breakpoint or
watchpoint register, and the max number of HW breakpoint or watchpoint
registers is 16, so the width of 'unsigned long long' is sufficient.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Add
nat/aarch64-linux-hw-point.h.
(aarch64-linux-hw-point.o): New rule.
* nat/aarch64-linux-hw-point.h: New file.
* nat/aarch64-linux-hw-point.c: New file.
* aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
(AARCH64_HWP_ALIGNMENT): Likewise.
(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
(struct aarch64_debug_reg_state): Likewise.
(struct arch_lwp_info): Likewise.
(aarch64_linux_set_debug_regs): Likewise.
(aarch64_notify_debug_reg_change): Remove static.
(aarch64_align_watchpoint): Likewise.
(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
(aarch64_watchpoint_length): Likewise.
(aarch64_point_encode_ctrl_reg): Likewise
(aarch64_point_is_aligned): Likewise.
(aarch64_dr_state_insert_one_point): Likewise.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
* config/aarch64/linux.mh (NAT_FILE): Add
aarch64-linux-hw-point.o.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* Makefile.in (aarch64-linux-hw-point.o): New rule.
* configure.srv (srv_tgtobj): Append aarch64-linux-hw-point.o.
* linux-aarch64-low.c: Include nat/aarch64-linux-hw-point.h.
(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
(AARCH64_HWP_ALIGNMENT): Likewise.
(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
(struct aarch64_debug_reg_state): Likewise.
(struct arch_lwp_info): Likewise.
(aarch64_align_watchpoint): Likewise.
(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
(aarch64_watchpoint_length): Likewise.
(aarch64_point_encode_ctrl_reg): Likewise
(aarch64_point_is_aligned): Likewise.
(aarch64_align_watchpoint): Likewise.
(aarch64_linux_set_debug_regs):
(aarch64_dr_state_insert_one_point): Likewise.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
Later patches need regex support also in gdbserver.
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
Check for libipt, an Intel(R) Processor Trace decoder library. The sources
can be found on github at:
https://github.com/01org/processor-trace
gdb/
* configure.ac: Check for libipt
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in (LIBIPT): New.
(CLIBS): Add $LIBIPT.
* NEWS: document new configure options
This commit moves the code to handle lwp_info.arch_private for
Linux x86 into a new shared file, nat/x86-linux.c.
gdb/ChangeLog:
* nat/x86-linux.h: New file.
* nat/x86-linux.c: Likewise.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
(x86-linux.o): New rule.
* config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
(lwp_set_arch_private_info): New declaration.
(lwp_arch_private_info): Likewise.
* linux-nat.c (lwp_set_arch_private_info): New function.
(lwp_arch_private_info): Likewise.
* x86-linux-nat.c: Include nat/x86-linux.h.
(arch_lwp_info): Removed structure.
(update_debug_registers_callback):
Use lwp_set_debug_registers_changed.
(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
and lwp_set_debug_registers_changed.
(x86_linux_new_thread): Use lwp_set_debug_registers_changed.
gdb/gdbserver/ChangeLog:
* Makefile.in (x86-linux.o): New rule.
* configure.srv: Add x86-linux.o to relevant targets.
* linux-low.c (lwp_set_arch_private_info): New function.
(lwp_arch_private_info): Likewise.
* linux-x86-low.c: Include nat/x86-linux.h.
(arch_lwp_info): Removed structure.
(update_debug_registers_callback):
Use lwp_set_debug_registers_changed.
(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
and lwp_set_debug_registers_changed.
(x86_linux_new_thread): Use lwp_set_debug_registers_changed.
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6. But coincidentally such UNICes are no longer
really supported by GDB. Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.
In mail
Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
Message-ID: <20140211034157.GG5485@adacore.com>
https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:
So I chose HP-UX first for this patch.
gdb/ChangeLog
2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove HPUX.
* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
ia64-hpux-tdep.h, solib-ia64-hpux.h.
(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
hppa-hpux-tdep.c.
* config/ia64/hpux.mh: Remove file.
* config/pa/hpux.mh: Remove file.
* configure: Rebuilt.
* configure.ac (dlgetmodinfo, somread.o): Remove.
* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
(ia64-*-hpux*): Remove its float format exception.
* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
* hppa-hpux-nat.c: Remove file.
* hppa-hpux-tdep.c: Remove file.
* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
Move them here from hppa-tdep.h
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
Move them to hppa-tdep.c.
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
declarations.
* ia64-hpux-nat.c: Remove file.
* ia64-hpux-tdep.c: Remove file.
* ia64-hpux-tdep.h: Remove file.
* inf-ttrace.c: Remove file.
* inf-ttrace.h: Remove file.
* solib-ia64-hpux.c: Remove file.
* solib-ia64-hpux.h: Remove file.
* solib-pa64.c: Remove file.
* solib-pa64.h: Remove file.
* solib-som.c: Remove file.
* solib-som.h: Remove file.
* somread.c: Remove file.
This commits cleans up the gdb/breakpoint.c file and moves everything
that is related to the 'catch syscall' command to the new file
gdb/break-catch-syscall.c. This is just code movement, and the only
new part is the adjustment needed on 'catching_syscall_number' to use
the new 'breakpoint_find_if' function insted of relying on the
ALL_BREAKPOINTS macro.
Tested by running the 'gdb.base/catch-syscall.exp' testcase.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): New source break-catch-syscall.c.
(COMMON_OBS): New object break-catch-syscall.o.
* break-catch-syscall.c: New file.
* breakpoint.c: Remove inclusion of "xml-syscall.h".
(syscall_catchpoint_p): Move declaration to break-catch-syscall.c
(struct syscall_catchpoint): Likewise.
(dtor_catch_syscall): Likewise.
(catch_syscall_inferior_data): Likewise.
(struct catch_syscall_inferior_data): Likewise.
(get_catch_syscall_inferior_data): Likewise.
(catch_syscall_inferior_data_cleanup): Likewise.
(insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
(breakpoint_hit_catch_syscall): Likewise.
(print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_breakpoint_ops): Likewise.
(syscall_catchpoint_p): Likewise.
(create_syscall_event_catchpoint): Likewise.
(catch_syscall_split_args): Likewise.
(catch_syscall_command_1): Likewise.
(is_syscall_catchpoint_enabled): Likewise.
(catch_syscall_enabled): Likewise.
(catching_syscall_number): Likewise.
(catch_syscall_completer): Likewise.
(clear_syscall_counts): Likewise.
(initialize_breakpoint_ops): Move initialization of syscall
catchpoints to break-catch-syscall.c.
(_initialize_breakpoint): Move code related to syscall catchpoints
to break-catch-syscall.c.
This new option, disabled by default for now, allows specifying
whether to build GDB, GDBserver, and friends with a C++ (98/03)
compiler.
The name of the switch should be familiar to those who followed GCC's
own C++ conversion process.
. Adding -fpermissive to COMPILER in C++ mode (see the new
build-with-cxx.m4 file) makes errors like these be warnings instead:
gdb/infrun.c:6597:1: error: initializing argument 1 of ‘void sig_print_info(gdb_signal)’ [-fpermissive]
sig_print_info (enum gdb_signal oursig)
^
gdb/infrun.c: In function ‘void do_restore_infcall_suspend_state_cleanup(void*)’:
gdb/infrun.c:7164:39: error: invalid conversion from ‘void*’ to ‘infcall_suspend_state*’ [-fpermissive]
restore_infcall_suspend_state (state);
^
so that the compiler carries on compiling the file. -Werror still
catches the warnings, so nothing is lost, only our lifes are made
easier by concentrating on getting other more important things out of
the way first.
There's no way to quiet those warnings. Until they're all fixed, when
building in C++ mode, -Werror is disabled by default.
. Adding -Wno-narrowing suppresses thousands of instances of this warning:
gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1l’ from ‘LONGEST {aka long int}’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
gdb/arm-linux-tdep.c:450:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
We can defer handling those until we target C++11.
. Adding -Wno-sign-compare suppresses thousands of instances of this warning:
gdb/linux-record.c:1763:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (tmpulongest == tdep->fcntl_F_GETLK64)
^
. Adding -Wno-write-strings suppresses thousands of instances of this warning:
gdb/mi/mi-cmd-var.c: In function ‘void mi_cmd_var_show_attributes(char*, char**, int)’:
gdb/mi/mi-cmd-var.c:514:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
attstr = "editable";
^
gdb/mi/mi-cmd-var.c:516:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
attstr = "noneditable";
^
For now, it's best to hide these warnings from view until we're
'-fpermissive'-clean, and can thus start building with -Werror.
The C compiler has always managed to build working GDBs with these
issues in the code, so a C++ compiler should too.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER): New, get it from autoconf.
(COMPILE.pre, CC_LD): Use COMPILER.
(CXX): Get from autoconf instead.
(CXX_FOR_TARGET): Default to g++ instead of gcc.
* acinclude.m4: Include build-with-cxx.m4.
* build-with-cxx.m4: New file.
* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
Disable -Werror by default if building in C++ mode.
(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
-Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
Run supported-warning-flags tests with the C++ compiler.
Save/restore CXXFLAGS too.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER): New, get it from autoconf.
(CXX): Get from autoconf instead.
(COMPILE.pre): Use COMPILER.
(CC-LD): Rename to ...
(CC_LD): ... this. Use COMPILER.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT), $(IPA_LIB)): Adjust.
(CXX_FOR_TARGET): Default to g++ instead of gcc.
* acinclude.m4: Include build-with-cxx.m4.
* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
Disable -Werror by default if building in C++ mode.
(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
-Wno-narrowing in C++ mode. Run supported-warning-flags tests with
the C++ compiler. Save/restore CXXFLAGS too.
* configure: Regenerate.
Preparation for using this on all hosts.
Confirmed that --host=x86_64-w64-mingw32 still builds the stub
termcap.
gdb/ChangeLog:
2015-02-26 Pedro Alves <palves@redhat.com>
* windows-termcap.c: Rename to ...
* stub-termcap.c: ... this. Adjust header line.
* Makefile.in (SFILES): Refer to stub-termcap.c instead of
windows-termcap.c.
* configure: Regenerate.
* configure.ac: Refer to stub-termcap.o instead of
windows-termcap.o.
* gdb_curses.h: Mention stub-termcap.c instead of
windows-termcap.c.
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating
the common idiom which is the transformation of target program names,
i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac
and gdb/testsuite/configure.ac to use the new macro.
gdb/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* Makefile.in (aclocal_m4_deps): Added transform.m4.
* acinclude.m4: sinclude transform.m4.
* transform.m4: New file.
(GDB_AC_TRANSFORM): New macro.
gdb/testsuite/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
This patch adds a new type of probe to GDB: the DTrace USDT probes. The new
type is added by providing functions implementing all the entries of the
`probe_ops' structure defined in `probe.h'. The implementation is
self-contained and does not depend on DTrace source code in any way.
gdb/ChangeLog:
2015-02-7 Jose E. Marchesi <jose.marchesi@oracle.com>
* breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
the -probe-dtrace new vpossible value for PROBE_MODIFIER.
* configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
handle ELF files.
* Makefile.in (SFILES): dtrace-probe.c added.
* configure: Regenerate.
* dtrace-probe.c: New file.
(SHT_SUNW_dof): New constant.
(dtrace_probe_type): New enum.
(dtrace_probe_arg): New struct.
(dtrace_probe_arg_s): New typedef.
(struct dtrace_probe_enabler): New struct.
(dtrace_probe_enabler_s): New typedef.
(dtrace_probe): New struct.
(dtrace_probe_is_linespec): New function.
(dtrace_dof_sect_type): New enum.
(dtrace_dof_dofh_ident): Likewise.
(dtrace_dof_encoding): Likewise.
(DTRACE_DOF_ENCODE_LSB): Likewise.
(DTRACE_DOF_ENCODE_MSB): Likewise.
(dtrace_dof_hdr): New struct.
(dtrace_dof_sect): Likewise.
(dtrace_dof_provider): Likewise.
(dtrace_dof_probe): Likewise.
(DOF_UINT): New macro.
(DTRACE_DOF_PTR): Likewise.
(DTRACE_DOF_SECT): Likewise.
(dtrace_process_dof_probe): New function.
(dtrace_process_dof): Likewise.
(dtrace_build_arg_exprs): Likewise.
(dtrace_get_arg): Likewise.
(dtrace_get_probes): Likewise.
(dtrace_get_probe_argument_count): Likewise.
(dtrace_can_evaluate_probe_arguments): Likewise.
(dtrace_evaluate_probe_argument): Likewise.
(dtrace_compile_to_ax): Likewise.
(dtrace_probe_destroy): Likewise.
(dtrace_gen_info_probes_table_header): Likewise.
(dtrace_gen_info_probes_table_values): Likewise.
(dtrace_probe_is_enabled): Likewise.
(dtrace_probe_ops): New variable.
(info_probes_dtrace_command): New function.
(_initialize_dtrace_probe): Likewise.
(dtrace_type_name): Likewise.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a structure to hold the branch trace data and an enum to describe
the format of that data. So far, only BTS is supported. Also added
a NONE format to indicate that no branch trace data is available.
This will make it easier to support different branch trace formats in
the future.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (SFILES): Add common/btrace-common.c.
(COMMON_OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* btrace.c (parse_xml_btrace): Update parameters.
(parse_xml_btrace_block): Set format field.
(btrace_add_pc, btrace_fetch): Use struct btrace_data.
(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
(btrace_compute_ftrace): Split into this and...
(btrace_compute_ftrace_bts): ...this.
(btrace_stitch_trace): Split into this and...
(btrace_stitch_bts): ...this.
* btrace.h (parse_xml_btrace): Update parameters.
(make_cleanup_btrace_data): New.
* common/btrace-common.c: New.
* common/btrace-common.h: Include common-defs.h.
(btrace_block_s): Update comment.
(btrace_format): New.
(btrace_format_string): New.
(btrace_data_bts): New.
(btrace_data): New.
(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
* remote.c (remote_read_btrace): Update parameters.
* target.c (target_read_btrace): Update parameters.
* target.h (target_read_btrace): Update parameters.
(target_ops)<to_read_btrace>: Update parameters.
* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
* target-delegates.c: Regenerate.
* target-debug (target_debug_print_struct_btrace_data_p): New.
* nat/linux-btrace.c (linux_read_btrace): Split into this and...
(linux_read_bts): ...this.
* nat/linux-btrace.h (linux_read_btrace): Update parameters.
gdbserver/
* Makefile.in (SFILES): Add common/btrace-common.c.
(OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* linux-low: Include btrace-common.h.
(linux_low_read_btrace): Use struct btrace_data. Call
btrace_data_init and btrace_data_fini.
gdb/
2015-01-22 Eli Zaretskii <eliz@gnu.org>
* Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
(ALLDEPFILES): Remove irix5-nat.c. These two are part of the
reason that "make TAGS" is broken.
This patch moves the shared code present on
gdb/linux-nat.c:linux_nat_create_inferior and
gdb/gdbserver/linux-low.c:linux_create_inferior to
nat/linux-personality.c. This code is responsible for disabling
address space randomization based on user setting, and using
<sys/personality.h> to do that. I decided to put the prototype of the
maybe_disable_address_space_randomization on nat/linux-osdata.h
because it seemed the best place to put it.
I regression-tested this patch on Fedora 20 x86_64, and found no
regressions.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
(linux-personality.o): New rule.
* common/common-defs.h: Include <stdint.h>.
* config/aarch64/linux.mh (NATDEPFILES): Include
linux-personality.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/s390/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
* defs.h: Remove #include <stdint.h> (moved to
common/common-defs.h).
* linux-nat.c: Include nat/linux-personality.h. Remove #include
<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
nat/linux-personality.c).
(linux_nat_create_inferior): Remove code to disable address space
randomization (moved to nat/linux-personality.c). Create cleanup
to disable address space randomization.
* nat/linux-personality.c: New file.
* nat/linux-personality.h: Likewise.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add linux-personality.c.
(linux-personality.o): New rule.
* configure.srv (srv_linux_obj): Add linux-personality.o to the
list of objects to be built.
* linux-low.c: Include nat/linux-personality.h.
(linux_create_inferior): Remove code to disable address space
randomization (moved to ../nat/linux-personality.c). Create
cleanup to disable address space randomization.
This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files
to the respective common/{posix,mingw}-strerror.c files. This is a
preparation for the next patch, which shares a common code (to disable
address space randomization when creating a new inferior).
The patch has been regtested on Fedora 20 x86_64, and no regressions
were found.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
common/posix-strerror.c.
(posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* common/common-utils.h (safe_strerror): Move prototype to here,
from utils.h.
* common/common.host: New file.
* common/mingw-strerror.c: Likewise.
* common/posix-strerror.c: Likewise.
* configure: Regenerated.
* configure.ac: Source common/common.host. Add variable
common_host_obs to gdb_host_obs.
* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
gdb/common/posix-strerror.c when warning about the use of
strerror.
* mingw-hdep.c (safe_strerror): Remove definition; move it to
common/mingw-strerror.c.
* posix-hdep.c (safe_strerror): Remove definition; move it to
common/posix-hdep.c.
* utils.h (safe_strerror): Remove prototype; move to
common/common-utils.h.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* configure: Regenerated.
* configure.ac: Source file ../common/common.host. Initialize new
variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.
This patch is to teach both GDB and GDBServer to detect 64-bit inferior
correctly. We find a problem that GDBServer is unable to detect on a
e5500 core processor. Current GDBServer assumes that MSR is a 64-bit
register, but MSR is a 32-bit register in Book III-E. This patch is
to fix this problem by checking the right bit in MSR, in order to handle
both Book III-S and Book III-E. In order to detect Book III-S and
Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by
getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement
the fallback by parsing /proc/self/auxv), because it should an invariant
on the same machine cross different processes.
In order to share code, I add nat/ppc-linux.c for both GDB and
GDBserver side.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (ppc-linux.o): New rule.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
Declare.
* nat/ppc-linux.c: New file.
* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
Call ppc64_64bit_inferior_p.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (SFILES): Add nat/ppc-linux.c.
(ppc-linux.o): New rule.
* configure.srv (powerpc*-*-linux*): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call
ppc64_64bit_inferior_p
When I use PPC_FEATURE_BOOKE in GDBserver, I find it is defined in GDB
but not in GDBserver. After taking a further look, I find some macros
are duplicated between ppc-linux-nat.c and linux-ppc-low.c, so this
patch is to move them into nat/ppc-linux.h.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* linux-ppc-low.c: Include "nat/ppc-linux.h".
(PPC_FEATURE_HAS_VSX): Move to nat/ppc-linux.h.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Likewise.
(PT_ORIG_R3, PT_TRAP): Likewise.
(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
nat/ppc-linux.h.
(PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
(PPC_FEATURE_HAS_DFP): Likewise.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
Include "nat/ppc-linux.h".
* nat/ppc-linux.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
The #line directives within GDB's autogenerated yacc files (e.g.
c-exp.c) are being incorrectly munged, causing these directives to refer
to nonexistent source files, e.g.
#line 36 "/home/patrick/binutils-gdb/gdb//home/patrick/binutils-gdb/gdb/c-exp.y"
as opposed to
#line 36 "/home/patrick/binutils-gdb/gdb/c-exp.y"
The munging happens due to a sed expression added by commit 954d8cae
whose intended purpose[1] was to work around the fact that ylwrap emitted #line
directives without any directory information, e.g.
#line 36 "c-exp.y"
So the sed expression was meant to munge such directives to refer to
absolute paths instead. But the behavior of ylwrap was changed some
years ago[2] to emit absolute paths within #line directives. And when
our local copy of ylwrap was synced by commit e30465112, the sed
expression in question became unnecessary, and indeed harmful.
This patch removes the now-obsolete sed expression. The emitted #line
directives are now correct without it.
gdb/ChangeLog:
* Makefile.in (.y.c): Don't munge yacc's #line
directives.
[1]: https://sourceware.org/ml/gdb-patches/2010-11/msg00265.html
[2]: http://git.savannah.gnu.org/cgit/automake.git/commit/lib/ylwrap?id=b6359a5f3
This patch is to add SDE OS ABI support in GDB, which has been used in
codesourcery gdb tree for some years.
gdb:
2014-12-19 Maciej W. Rozycki <macro@codesourcery.com>
Nigel Stephens <nigel@mips.com>
Chris Dearman <chris@mips.com>
Luis Machado <lgustavo@codesourcery.com>
* Makefile.in (ALL_TARGET_OBS): Add mips-sde-tdep.o.
(ALLDEPFILES): Add mips-sde-tdep.c.
* mips-sde-tdep.c: New file containg SDE specific code.
* configure.tgt (mips*-sde*-elf*): Add mips-sde-dep.o to
gdb_target_obs.
* defs.h (gdb_osabi): Add GDB_OSABI_SDE.
* osabi.c (gdb_osabi_names): Add SDE.
* NEWS: Mention the change.
