In the case of non bit-packed arrays, GNAT does not generate its
traditional XP encoding; it is not needed. However, it still generates
the so-called "implementation type" with a P suffix. This
implementation type shall be skipped when looking for other
descriptive types such as XA encodings for variable-length
fields.
Note also that there may be an intermediate typedef between the
implementation type and its XA description. It shall be skipped
as well.
gdb/ChangeLog:
Jerome Guitton <guitton@adacore.com>
* ada-lang.c (find_parallel_type_by_descriptive_type):
Go through typedefs during lookup.
(to_fixed_array_type): Add support for non-bit packed arrays
as variable-length fields.
gdb/testsuite/ChangeLog:
* gdb.ada/byte_packed_arr: New testcase.
Consider the following declarations:
type Signed_Small is new Integer range - (2 ** 5) .. (2 ** 5 - 1);
type Signed_Simple_Array is array (1 .. 4) of Signed_Small;
pragma Pack (Signed_Simple_Array);
SSA : Signed_Simple_Array := (-1, 2, -3, 4);
GDB currently print its value incorrectly for the elements that
are negative:
(gdb) print ssa
$1 = (65535, 2, 1048573, 4)
(gdb) print ssa(1)
$2 = 65535
(gdb) print ssa(2)
$3 = 2
(gdb) print ssa(3)
$4 = 1048573
(gdb) print ssa(4)
$5 = 4
What happens is that the sign-extension is not working because
we're trying to do left shift with a negative count. In
ada_value_primitive_packed_val, we have a loop which populates
the extra bits of the target (unpacked) value, after extraction
of the data from the original (packed) value:
while (ntarg > 0)
{
accum |= sign << accumSize;
unpacked[targ] = accum & ~(~0L << HOST_CHAR_BIT);
!!! -> accumSize -= HOST_CHAR_BIT;
accum >>= HOST_CHAR_BIT;
ntarg -= 1;
targ += delta;
}
At each iteration, accumSize gets decremented by HOST_CHAR_BIT,
which can easily cause it to become negative, particularly on
little endian targets, where accumSize is at most HOST_CHAR_BIT - 1.
This causes us to perform a left-shift operation with a negative
accumSize at the next loop iteration, which is undefined, and
acutally does not produce the effect we wanted (value left untouched)
when the code is compiled with GCC.
This patch fixes the issue by simply setting accumSize to zero
if negative.
gdb/ChangeLog:
* ada-lang.c (ada_value_primitive_packed_val): Make sure
accumSize is never negative.
gdb/testsuite/ChangeLog:
* gdb.ada/pckd_neg: New testcase.
We observed on x86-windows that trying to call a function from
GDB leads to a mysterious "Invalid cast" error. This can be
observed in gdb.ada/float_param.exp:
(gdb) call set_long_double(1, global_small_struct, 4.0)
Invalid cast.
This happens because the 3rd parameter, a Long_Long_Float, is
actually passed wrapped inside a PAD structure. As documented
in GNAT's exp_dbug.ads, PAD types are simple wrappers that GNAT
uses to handle types with size or alignment constraints.
We already support those when printing an object encapsulated
in a PAD type, but not when trying to pass an argument that
is wrapped inside a PAD type. As a result, what happens is that
call_function_by_hand ends up with an argument with a type
that looks incompatible with the expected type of the argument.
The error comes when trying to push the arguments in inferior
memory, while trying to coerce each one of them to their expected
types (in value_arg_coerce).
Note that the problem is not specific to Windows, but so far, this is
the only platform where we've seen this happen.
gdb/ChangeLog:
* ada-lang.c (ada_convert_actual): Add handling of formals
passed inside an aligner type.
Tested on x86-windows (AdaCore testsuite) and x86_64-linux (official
testsuite as well as AdaCore's testsuite).
This patch improves the documentation of ada-lang.c's
value_assign_to_component to publish the fact that it also works
with not_lval values.
And touching this area of the code showed that there were a number
of whitespace issues, as well as a formatting issue of the main comment
(no leading '*' on each line). This patch fixes those while at it.
No functional change, however.
gdb/ChangeLog:
* ada-lang.c (value_assign_to_component): Reformat and improve
documentation. Remove all trailing spaces.
This is an issue which I noticed while working on trying to print
an array of variant records. For instance, trying to print "A1",
an array of elements whose size is variable, defined as follow
(see gdb.ada/var_rec_arr testcase):
subtype Small_Type is Integer range 0 .. 10;
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
function Ident (R : Record_Type) return Record_Type;
type Array_Type is array (Integer range <>) of Record_Type;
A1 : Array_Type := (1 => (I => 0, S => <>),
2 => (I => 1, S => "A"),
3 => (I => 2, S => "AB"));
The debugger sometimes prints the array as follow:
(gdb) print A1
$1 = ((i => 0, s => ""), (i => 0, s => ""), (i => 0, s => ""))
The problem happens inside the part of the loop printing the array's
elements, while trying to count the number of consecutive elements
that have the same value (in order to replace them by the "<repeats
nnn times>" message when the number exceeds a threshold). In particular,
in ada-valprint.c::val_print_packed_array_elements:
elttype = TYPE_TARGET_TYPE (type);
eltlen = TYPE_LENGTH (check_typedef (elttype));
while (...)
{
if (!value_contents_eq (v0, value_embedded_offset (v0),
v1, value_embedded_offset (v1),
eltlen))
break;
The value comparison is performed using value_contents_eq but makes
the assumption that elttype is not dynamic, which is not always true.
In particular, in the case above, elttype is dynamic and therefore
its TYPE_LENGTH changes from element to element.
As it happens in this case, the eltlen is zero, which causes the call
to value_contents_eq to return true, and therefore GDB thinks all
3 elements of the array are equal.
This patch fixes the issue by making sure that both v0 and v1, which
are values whose type we expect to be resolved, have identical lengths.
If not, then the two elements of the array cannot possibly have the
same value and we do not even need to do the binary comparison.
Unfortunately, this is still not enough to get GDB to print the correct
value for our array, because the assumption that v0 and v1 have a type
which has been resolved is actually not met. So, the second part of
the patch modifies the function that constructed the values to make
sure dynamic types do get resolved.
gdb/ChangeLog:
* ada-valprint.c (val_print_packed_array_elements): Delete
variable "len". Add a type-length check when comparing two
consecutive elements of the array. Use the element's actual
length in call to value_contents_eq.
* ada-lang.c (ada_value_primitive_packed_val): Always return
a value whose type has been resolved.
Consider the following declarations:
subtype Small_Type is Integer range 0 .. 10;
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
A2 : Array_Type := (1 => (I => 2, S => "AB"),
2 => (I => 1, S => "A"),
3 => (I => 0, S => <>));
Compiled with -fgnat-encodings=minimal, and trying to print
one element of our array, valgrind reports an invalid memory
access. On certain GNU/Linux boxes, malloc even reports it as
well, and causes GDB to crash.
(gdb) print a2(1)
*** glibc detected *** /[...]/gdb:
malloc(): memory corruption: 0x0a30ba48 ***
[crash]
The invalid memory access occurs because of a simple buffer
overflow in ada_value_primitive_packed_val. When this function
is called, it is given a bit_size of 128 (or 16 bytes), which
corresponds to the stride of our array. But the actual size of
each element depends on its value. In particular, A2(1) is a record
whose size is only 6 bytes.
What happens in our example is that we start building a new value
(v) where the element is to be unpacked, with any of its dynamic
properties getting resolved as well. We then unpack the data into
this value's buffer:
unpacked = (unsigned char *) value_contents (v);
[...]
nsrc = len;
[...]
while (nsrc > 0)
{
[...]
unpacked[targ] = accum & ~(~0L << HOST_CHAR_BIT);
[...]
targ += delta;
[...]
nsrc -= 1;
[...]
}
In the loop above, targ starts at zero (for LE architectures),
and len is 16. With delta being +1, we end up iterating 16 times,
writing 16 bytes into a 6-bytes buffer.
This patch fixes the issue by adjusting BIT_SIZE and recomputing
LEN after having resolved our type if the resolved type turns out
to be smaller than bit_size.
gdb/ChangeLog:
* ada-lang.c (ada_value_primitive_packed_val): Recompute
BIT_SIZE and LEN if the size of the resolved type is smaller
than BIT_SIZE * HOST_CHAR_BIT.
Consider the following (Ada) array...
A1 : Array_Type := (1 => (I => 0, S => <>),
2 => (I => 1, S => "A"),
3 => (I => 2, S => "AB"));
... where Array_Type is declared as follow:
subtype Small_Type is Integer range 0 .. 10;
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
type Array_Type is array (Integer range <>) of Record_Type;
Trying to print the value of each element individually does not
always work. Printing the value of the first one does:
(gdb) p a1(1)
$1 = (i => 0, s => "")
But printing the value of the subsequent ones often does not.
For instance:
(gdb) p a1(2)
$2 = (i => 1, s => "") <<<--- s should be "A"
(gdb) p a1(3)
$3 = (i => 2, s => "") <<<--- s should be "AB"
I traced the problem to ada_value_primitive_packed_val,
which is trying to perform the array subscripting by
extracting the value of the corresponding array element
into a buffer where the contents is now byte-aligned.
The element type that ada_value_primitive_packed_val gets passed
is a dynamic type. As it happens, that dynamic type can get resolved
thanks to:
v = value_at (type, value_address (obj));
type = value_type (v);
However, obj represents the array, so the address given in the call
to value_at represents the value of the first element. As a result,
the solution of component S's upper bound always gets resolved based
on the value of component I in the first element of the array, whose
value is 0, thus leading to GDB mistakely resolving the element type
where S's upper bound is always 0.
The proper fix would be to systematically resolve the element type
first. But, this requires us to extract-and-realign the element's
value so as to be able to pass it as "valaddr" to resolve_dynamic_type.
In the meantime, it's easy to make the situation a little better by
passing "value_address (obj) + offset" as the object address. This
only works when BIT_OFFSET is nul, but that should be the case when
the element type is anything but a scalar, which seems to be the only
situation where it seems important to resolve the type now. And we're
not that worse off otherwise.
But we'll try to find a better solution in a separate patch.
gdb/ChangeLog:
* ada-lang.c (ada_value_primitive_packed_val): Use a more
correct address in call to value_at. Adjust call to
value_address accordingly.
This is the second part of enhancing the debugger to print the value
of arrays of records whose size is variable when only standard DWARF
info is available (no GNAT encoding). For instance:
subtype Small_Type is Integer range 0 .. 10;
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
type Array_Type is array (Integer range <>) of Record_Type;
A1 : Array_Type := (1 => (I => 0, S => <>),
2 => (I => 1, S => "A"),
3 => (I => 2, S => "AB"));
Currently, GDB prints the following output:
(gdb) p a1
$1 = (
The error happens while the ada-valprint module is trying to print
the value of an element of our array. Because of the fact that
the array's element (type Record_Type) has a variant size, the DWARF
info for our array provide the array's stride:
<1><749>: Abbrev Number: 10 (DW_TAG_array_type)
<74a> DW_AT_name : (indirect string, offset: 0xb6d): pck__T18s
<74e> DW_AT_byte_stride : 16
<74f> DW_AT_type : <0x6ea>
And because our array has a stride, ada-valprint treats it the same
way as packed arrays (see ada-valprint.c::ada_val_print_array):
if (TYPE_FIELD_BITSIZE (type, 0) > 0)
val_print_packed_array_elements (type, valaddr, offset_aligned,
0, stream, recurse,
original_value, options);
The first thing that we should notice in the call above is that
the "valaddr" buffer and the associated offset (OFFSET_ALIGNED)
is passed, but that the corresponding array's address is not.
This can be explained by looking inside val_print_packed_array_elements,
where we see that the function unpacks each element of our array from
the buffer alone (ada_value_primitive_packed_val), and then prints
the resulting artificial value instead:
v0 = ada_value_primitive_packed_val (NULL, valaddr + offset,
(i0 * bitsize) / HOST_CHAR_BIT,
(i0 * bitsize) % HOST_CHAR_BIT,
bitsize, elttype);
[...]
val_print (elttype, value_contents_for_printing (v0),
value_embedded_offset (v0), 0, stream,
recurse + 1, v0, &opts, current_language);
Of particular interest, here, is the fact that we call val_print
with a null address, which is OK, since we're providing a buffer
instead (value_contents_for_printing). Also, providing an address
might not always possible, since packing could place elements at
boundaries that are not byte-aligned.
Things go south when val_print tries to see if there is a pretty-printer
that could be applied. In particular, one of the first things that
the Python pretty-printer does is to create a value using our buffer,
and the given address, which in this case is null (see call to
value_from_contents_and_address in gdbpy_apply_val_pretty_printer).
value_from_contents_and_address, in turn immediately tries to resolve
the type, using the given address, which is null. But, because our
array element is a record containing an array whose bound is the value
of one of its elements (the "s" component), the debugging info for
the array's upper bound is a reference...
<3><71a>: Abbrev Number: 7 (DW_TAG_subrange_type)
<71b> DW_AT_type : <0x724>
<71f> DW_AT_upper_bound : <0x703>
... to component "i" of our record...
<2><703>: Abbrev Number: 5 (DW_TAG_member)
<704> DW_AT_name : i
<706> DW_AT_decl_file : 2
<707> DW_AT_decl_line : 6
<708> DW_AT_type : <0x6d1>
<70c> DW_AT_data_member_location: 0
... where that component is located at offset 0 of the start
of the record. dwarf2_evaluate_property correctly determines
the offset where to load the value of the bound from, but then
tries to read that value from inferior memory using the address
that was given, which is null. See case PROP_ADDR_OFFSET in
dwarf2_evaluate_property:
val = value_at (baton->offset_info.type,
pinfo->addr + baton->offset_info.offset);
This triggers a memory error, which then causes the printing to terminate.
Since there are going to be situations where providing an address
alone is not going to be sufficient (packed arrays where array elements
are not stored at byte boundaries), this patch fixes the issue by
enhancing the type resolution to take both address and data. This
follows the same principle as the val_print module, where both
address and buffer ("valaddr") can be passed as arguments. If the data
has already been fetched from inferior memory (or provided by the
debugging info in some form -- Eg a constant), then use that data
instead of reading it from inferior memory.
Note that this should also be a good step towards being able to handle
dynamic types whose value is stored outside of inferior memory
(Eg: in a register).
With this patch, GDB isn't able to print all of A1, but does perform
a little better:
(gdb) p a1
$1 = ((i => 0, s => , (i => 1, s => , (i => 2, s => )
There is another issue which is independent of this one, and will
therefore be patched separately.
gdb/ChangeLog:
* dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
* dwarf2loc.c (dwarf2_evaluate_property): Add handling of
pinfo->valaddr.
* gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
* gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
(resolve_dynamic_type_internal): Set pinfo.valaddr.
Add handling of addr_stack->valaddr.
(resolve_dynamic_type): Add "valaddr" parameter.
Set pinfo.valaddr field.
* ada-lang.c (ada_discrete_type_high_bound): Update call to
resolve_dynamic_type.
(ada_discrete_type_low_bound): Likewise.
* findvar.c (default_read_var_value): Likewise.
* value.c (value_from_contents_and_address): Likewise.
Currently, ada-lang.c:template_to_static_fixed_type (working on
structure types only) caches its result into the unused TYPE_TARGET_TYPE
field. This introduces inconsistencies when the input type is
specialized, for instance during type resolution: the cached static
fixed type is copied along with the original type, but it's no longer
adapted to the copy once the copy is modified:
template_to_static_fixed_type has to compute another static fixed type
for it.
This change first introduces a cache reset during type resolution for
structure types so that this inconsistency does not happen anymore. It
also makes template_to_static_fixed_type smarter with respect to types
that do not need static fixed copies so that less computations is done
in general.
This inconsistency was spotted thanks to code reading, not because of
any sort of failure and we did not manage to exhibit a failure yet, so
no testcase for this.
gdb/ChangeLog:
* ada-lang.c (template_to_static_fixed_type): Return input type
when it is already fixed. Cache the input type itself when not
creating a static fixed copy. Make it explicit that we never
molestate the input type.
* gdbtypes.c (resolve_dynamic_struct): Reset the
TYPE_TARGET_TYPE field for resolved copies.
Consider the following declarations:
type Int_Access is access Integer;
type Record_Type is record
IA : Int_Access;
end record;
R : Record_Type;
Printing the type name of "R.IA" yields:
(gdb) whatis r.ia
type = access integer
It should be:
(gdb) whatis r.ia
type = bar.int_access
Looking at the debugging info, field "r.ia" is defined as
a typedef which has the name of the field type:
.uleb128 0x3 # (DIE (0x4e) DW_TAG_typedef)
.long .LASF4 # DW_AT_name: "bar__int_access"
.long 0x8b # DW_AT_type
... with the typedef's target type being an anonymous pointer
type:
.uleb128 0x7 # (DIE (0x8b) DW_TAG_pointer_type)
.byte 0x8 # DW_AT_byte_size
.long 0x91 # DW_AT_type
What happens here is that a couple of function in ada-lang.c
always start by stripping all typedef layers when handling
struct fields, with the effect of making us lose the type name
in this case.
We did not understand this at the time the code was written,
but typedefs should be stripped only when we know we do not
need them. So this patch, adjust the code to avoid the stripping
while handling the fields, and adds it back in the lone place
which handles the result of processing and didn't know how to
handle typedefs struct fields yet.
gdb/ChangeLog:
* ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
(ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
(template_to_static_fixed_type): Call ada_check_typedef only
when necessary.
gdb/testsuite/ChangeLog:
* gdb.ada/rec_comp: New testcase.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
When ada-lang.c:ada_lookup_symbol_list_worker finds a match in
the symbol cache, it caches the result again, which is unecessary.
This patch fixes the code to avoid that.
gdb/ChangeLog:
PR gdb/17856:
* ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
results found in the cache.
Tested on x86_64-linux, no regression.
The Ada symbol cache has been designed to have one instance of that
of that cache per program space, and for each instance to be created
on-demand. ada_get_symbol_cache is the function responsible for both
lookup and creation on demand.
Unfortunately, ada_get_symbol_cache forgot to store the reference
to newly created caches, thus causing it to:
- Leak old caches;
- Allocate a new cache each time the cache is being searched or
a new entry is to be inserted.
This patch fixes the issue by avoiding the use of the local variable,
which indirectly allowed the bug to happen. We manipulate the reference
in the program-space data instead.
gdb/ChangeLog:
PR gdb/17854:
* ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
when allocating a new one.
This commit adds a new callback parameter, "expansion_notify", to the
top-level expand_symtabs_matching function and to all the vectorized
functions it defers to. If expansion_notify is non-NULL, it will be
called every time a symbol table is expanded.
gdb/ChangeLog:
* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
(struct quick_symbol_functions) <expand_symtabs_matching>:
New argument expansion_notify. All uses updated.
(expand_symtabs_matching): New argument expansion_notify.
All uses updated.
* symfile-debug.c (debug_qf_expand_symtabs_matching):
Also print expansion notify.
* symtab.c (expand_symtabs_matching_via_partial): Call
expansion_notify whenever a partial symbol table is expanded.
* dwarf2read.c (dw2_expand_symtabs_matching): Call
expansion_notify whenever a symbol table is instantiated.
Consider the following code:
type Table is array (Positive range <>) of Integer;
type Object (N : Integer) is record
Data : Table (1 .. N);
end record;
My_Object : Object := (N => 3, Data => (3, 5, 8));
Trying to print the range and length of the My_Object.Data array yields:
(gdb) print my_object.data'first
$1 = 1
(gdb) print my_object.data'last
$2 = 0
(gdb) print my_object.data'length
$3 = 0
The first one is correct, and that is thanks to the fact that
the lower bound is statically known. However, for the upper
bound, and consequently the array's length, the values are incorrect.
It should be:
(gdb) print my_object.data'last
$2 = 3
(gdb) print my_object.data'length
$3 = 3
What happens here is that ada_array_bound_from_type sees that
our array has a parallel "___XA" type, and therefore tries to
use it. In particular, it described our array's index type as:
[...]___XDLU_1__n, which means lower bound = 1, and upper bound
is value of "n". Unfortunately, ada_array_bound_from_type does
not have access to the discriminant, and is therefore unable to
compute the bound correctly.
Fortunately, at this stage, the bound has already been computed
a while ago, and therefore doesn't need to be re-computed here.
This patch fixes the issue by ignoring that ___XA type if the array
is marked as already fixed.
This also fixes the same issue with packed arrays.
gdb/ChangeLog:
* ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
___XA type if the array has already been fixed.
gdb/testsuite/ChangeLog:
* gdb.ada/var_arr_attrs: New testcase.
The following change...
commit 1994afbf19
Date: Tue Dec 23 07:55:39 2014 -0800
Subject: Look up primitive types as symbols.
... caused the following regression:
% gdb
(gdb) set lang ada
(gdb) python print gdb.lookup_type('character')
Traceback (most recent call last):
File "<string>", line 1, in <module>
gdb.error: No type named character.
Error while executing Python code.
This is because the language_lookup_primitive_type_as_symbol call
was moved to the la_lookup_symbol_nonlocal hook. A couple of
implementations have been upated accordingly, but the Ada version
has not. This patch fixes this omission.
gdb/ChangeLog:
* ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
in static block, then try searching for primitive types.
gdb/testsuite/ChangeLog:
* gdb.python/py-lookup-type.exp: New file.
gdb/ChangeLog:
* ada-lang.c (user_select_syms): Only fetch symtab if symbol is
objfile-owned.
(cache_symbol): Ignore symbols that are not objfile-owned.
* block.c (block_objfile): New function.
(block_gdbarch): New function.
* block.h (block_objfile): Declare.
(block_gdbarch): Declare.
* c-exp.y (classify_name): Remove call to
language_lookup_primitive_type. No longer necessary.
* gdbtypes.c (lookup_typename): Call lookup_symbol_in_language.
Remove call to language_lookup_primitive_type. No longer necessary.
* guile/scm-symbol.c (syscm_gdbarch_data_key): New static global.
(syscm_gdbarch_data): New struct.
(syscm_init_arch_symbols): New function.
(syscm_get_symbol_map): Renamed from syscm_objfile_symbol_map.
All callers updated. Handle symbols owned by arches.
(gdbscm_symbol_symtab): Handle symbols owned by arches.
(gdbscm_initialize_symbols): Initialize syscm_gdbarch_data_key.
* language.c (language_lookup_primitive_type_1): New function.
(language_lookup_primitive_type): Call it.
(language_alloc_type_symbol): New function.
(language_init_primitive_type_symbols): New function.
(language_lookup_primitive_type_as_symbol): New function.
* language.h (struct language_arch_info) <primitive_type_symbols>:
New member.
(language_lookup_primitive_type): Add function comment.
(language_lookup_primitive_type_as_symbol): Declare.
* printcmd.c (address_info): Handle arch-owned symbols.
* python/py-symbol.c (sympy_get_symtab): Ditto.
(set_symbol): Ditto.
(sympy_dealloc): Ditto.
* symmisc.c (print_symbol): Ditto.
* symtab.c (fixup_symbol_section): Ditto.
(lookup_symbol_aux): Initialize block_found.
(basic_lookup_symbol_nonlocal): Try looking up the symbol as a
primitive type.
(initialize_objfile_symbol_1): New function.
(initialize_objfile_symbol): Call it.
(allocate_symbol): Call it.
(allocate_template_symbol): Call it.
(symbol_objfile): Assert symbol is objfile-owned.
(symbol_arch, symbol_symtab, symbol_set_symtab): Ditto.
* symtab.h (struct symbol) <owner>: Replaces member "symtab".
(struct symbol) <is_objfile_owned>: New member.
(SYMBOL_OBJFILE_OWNED): New macro.
* cp-namespace.c (cp_lookup_bare_symbol): New arg langdef.
All callers updated. Try to find the symbol as a primitive type.
(lookup_namespace_scope): New arg langdef. All callers updated.
Call cp_lookup_bare_symbol directly for simple bare symbols.
Trying to print the value of a string whose size is not known at
compile-time before it gets assigned a value can lead to the following
internal error:
(gdb) p my_str
$1 =
/[...]/utils.c:1089: internal-error: virtual memory exhausted.
What happens is that my_str is described as a reference to an array
type whose bounds are dynamic. During the read of that variable's
value (in default_read_var_value), we end up resolving dynamic types
which, for reference types, makes us also resolve the target of that
reference type. This means we resolve our variable to a reference
to an array whose bounds are undefined, and unfortunately very far
appart.
So, when we pass that value to ada-valprint, and in particular to
da_val_print_ref, we eventually try to allocate too large of a buffer
corresponding to the (bogus) size of our array, hence the internal
error.
This patch fixes the problem by adding a size_check before trying
to print the dereferenced value. To perform this check, a function
that was previously specific to ada-lang.c (check_size) gets
exported, and renamed to something less prone to name collisions
(ada_ensure_varsize_limit).
gdb/ChangeLog:
* ada-lang.h (ada_ensure_varsize_limit): Declare.
* ada-lang.c (check_size): Remove advance declaration.
(ada_ensure_varsize_limit): Renames check_size.
Replace calls to check_size by calls to ada_ensure_varsize_limit
throughout.
* ada-valprint.c (ada_val_print_ref): Add call to
ada_ensure_varsize_limit. Add comment explaining why.
gdb/testsuite/ChangeLog:
* gdb.ada/str_uninit: New testcase.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
Jan noticed that gdb.ada/arrayidx.exp regressed after I applied
the following patch:
commit 8908fca577
Author: Joel Brobecker <brobecker@adacore.com>
Date: Sat Sep 27 09:09:34 2014 -0700
Subject: [Ada] Ignore __XA types when redundant.
What happens is that we're trying to print the value of
r_two_three, which is defined as follow:
type Index is (One, Two, Three);
type RTable is array (Index range Two .. Three) of Integer;
R_Two_Three : RTable := (2, 3);
The expected output is:
(gdb) p r_two_three
$1 = (two => 2, 3)
But after the patch above was applied, with the program program
compiled using gcc-gnat-4.9.2-1.fc21.x86_64 (x86_64-linux),
the output becomes:
(gdb) p r_two_three
$1 = (2, 3)
(the name of the first bound is missing). The problem comes from
the fact that the compiler described the array's index type as
a plain base type, instead of as a subrange of the enumerated type.
More particularly, this is what gcc-gnat-4.9.2-1.fc21.x86_64
generated:
<3><7ce>: Abbrev Number: 9 (DW_TAG_array_type)
<7cf> DW_AT_name : (indirect string, offset: 0xc13): p__rtable
[...]
<7d7> DW_AT_GNAT_descriptive_type: <0x98a>
[...]
<4><7df>: Abbrev Number: 8 (DW_TAG_subrange_type)
<7e0> DW_AT_type : <0xa79>
where DIE 0xa79 is:
<1><a79>: Abbrev Number: 2 (DW_TAG_base_type)
<a7a> DW_AT_byte_size : 8
<a7b> DW_AT_encoding : 7 (unsigned)
<a7c> DW_AT_name : (indirect string, offset: 0xfc): sizetype
The actual array subrange type can be found in the array's
parallel XA type (the DW_AT_GNAT_descriptive_type).
The recent commit correctly found that that bounds taken from
the descriptive type are the same as bounds of our array's index
type. But it failed to notice that ignoring this descriptive
type would make us lose the actual array index type, making us
think that we're printing an array indexed by integers.
I hadn't seen that problem, because the compiler I used produced
debugging info where the array's index type is correctly described:
<3><79f>: Abbrev Number: 10 (DW_TAG_array_type)
<7a0> DW_AT_name : (indirect string, offset: 0xb3d): p__rtable
[...]
<4><7b0>: Abbrev Number: 8 (DW_TAG_subrange_type)
<7b1> DW_AT_type : <0x9b2>
<7b5> DW_AT_upper_bound : 2
... where DIE 0x9b2 leads us to ...
<3><9b2>: Abbrev Number: 9 (DW_TAG_subrange_type)
[...]
<9b8> DW_AT_type : <0x962>
<2><962>: Abbrev Number: 22 (DW_TAG_enumeration_type)
<963> DW_AT_name : (indirect string, offset: 0xb34): p__index
[...]
This patch fixes the issue by also making sure that the subtype
of the original range type does match the subtype found in the
descriptive type.
gdb/ChangeLog:
* ada-lang.c (ada_is_redundant_range_encoding): Return 0
if the TYPE_CODE of range_type's base type does not match
the TYPE_CODE of encoding_type's base type.
Using the example in gdb.ada/complete.exp, the following command
on x86_64-windows returns one unwanted completion choice :
(gdb) complete p pck
p <pck_E>>
[all following completions entries snipped, all expected]
I tracked down this suprising entry to a minimal symbol whose name
is ".refptr.pck_E". The problem occurs while trying to see if
this symbol matches "pck" when doing wild-matching as we are doing
here:
/* Second: Try wild matching... */
if (!match && wild_match_p)
{
/* Since we are doing wild matching, this means that TEXT
may represent an unqualified symbol name. We therefore must
also compare TEXT against the unqualified name of the symbol. */
sym_name = ada_unqualified_name (ada_decode (sym_name));
if (strncmp (sym_name, text, text_len) == 0)
match = 1;
}
What happens is that ada_decode correctly identifies the fact that
SYM_NAME (".refptr.pck_E") is not following any GNAT encoding, and
therefore returns that same name, but bracketed: "<.refptr.pck_E>".
This is the convention we use for telling GDB that the decoded name
is not a real Ada name - and therefore should not be encoded for
operations such as name matching, symbol lookups, etc. So far, so good.
Next is the call to ada_unqualified_name, which unfortunately does
not notice that the decoded name it is being given isn't a natural
symbol, and just blindly strips everything up to the last do, returning
"pck_E>". And of course, "pck_E>" matches "pck" now, and so we end
up accepting this symbol as a match.
This patch fixes the problem by making ada_unqualified_name a little
smarter by making sure that the given decoded symbol name does not
start with '<'.
gdb/ChangeLog:
* ada-lang.c (ada_unqualified_name): Return DECODED_NAME if
it starts with '<'.
Tested on x86_64-windows using AdaCore's testsuite as well as
on x86_64-linux.
Consider the following code which declares a variable A2 which
is an array of arrays of integers.
type Array2_First is array (24 .. 26) of Integer;
type Array2_Second is array (1 .. 2) of Array2_First;
A1 : Array1_Second := ((10, 11, 12), (13, 14, 15));
Trying to print the type of that variable currently yields:
(gdb) ptype A2
type = array (1 .. 2, 24 .. 26) of integer
This is not correct, as this is the description of a two-dimension
array, which is different from an array of arrays. The expected
output is:
(gdb) ptype a2
type = array (1 .. 2) of foo_n926_029.array2_first
GDB's struct type currently handles multi-dimension arrays the same
way arrays of arrays, where each dimension is stored as a sub-array.
The ada-valprint module considers that consecutive array layers
are in fact multi-dimension arrays. For array of arrays, a typedef
layer is introduced between the two arrays, creating a break between
each array type.
In our situation, A2 is a described as a typedef of an array type...
.uleb128 0x8 # (DIE (0x125) DW_TAG_variable)
.ascii "a2\0" # DW_AT_name
.long 0xfc # DW_AT_type
.uleb128 0x4 # (DIE (0xfc) DW_TAG_typedef)
.long .LASF5 # DW_AT_name: "foo__array2_second"
.long 0x107 # DW_AT_type
.uleb128 0x5 # (DIE (0x107) DW_TAG_array_type)
.long .LASF5 # DW_AT_name: "foo__array2_second"
.long 0xb4 # DW_AT_type
.uleb128 0x6 # (DIE (0x114) DW_TAG_subrange_type)
.long 0x11b # DW_AT_type
.byte 0x2 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x107
... whose element type is, as expected, a typedef to the sub-array
type:
.uleb128 0x4 # (DIE (0xb4) DW_TAG_typedef)
.long .LASF4 # DW_AT_name: "foo__array2_first"
.long 0xbf # DW_AT_type
.uleb128 0x9 # (DIE (0xbf) DW_TAG_array_type)
.long .LASF4 # DW_AT_name: "foo__array2_first"
.long 0xd8 # DW_AT_GNAT_descriptive_type
.long 0x1c5 # DW_AT_type
.uleb128 0xa # (DIE (0xd0) DW_TAG_subrange_type)
.long 0xf0 # DW_AT_type
.byte 0x18 # DW_AT_lower_bound
.byte 0x1a # DW_AT_upper_bound
.byte 0 # end of children of DIE 0xbf
The reason why things fails is that, during expression evaluation,
GDB tries to "fix" A1's type. Because the sub-array has a parallel
(descriptive) type (DIE 0xd8), GDB thinks that our array's index
type must be dynamic and therefore needs to be fixed. This in turn
causes the sub-array to be "fixed", which itself results in the
typedef layer to be stripped.
However, looking closer at the parallel type, we see...
.uleb128 0xb # (DIE (0xd8) DW_TAG_structure_type)
.long .LASF8 # DW_AT_name: "foo__array2_first___XA"
[...]
.uleb128 0xc # (DIE (0xe4) DW_TAG_member)
.long .LASF10 # DW_AT_name: "foo__Tarray2_firstD1___XDLU_24__26"
... that all it tells us is that the array bounds are 24 and 26,
which is already correctly provided by the array's DW_TAG_subrange_type
bounds, meaning that this parallel type is just redundant.
Parallel types in general are slowly being removed in favor of
standard DWARF constructs. But in the meantime, this patch kills
two birds with one stone:
1. It recognizes this situation where the XA type is useless,
and saves an unnecessary range-type fixing;
2. It fixes the issue at hand because ignoring the XA type results
in no type fixing being required, which allows the typedef layer
to be preserved.
gdb/ChangeLog:
* ada-lang.c (ada_is_redundant_range_encoding): New function.
(ada_is_redundant_index_type_desc): New function.
(to_fixed_array_type): Ignore parallel XA type if redundant.
gdb/testsuite/ChangeLog:
* gdb.ada/arr_arr: New testcase.
Tested on x86_64-linux.
... when that packed array is part of a discriminated record and
one of the bounds is a discriminant.
Consider the following code:
type FUNNY_CHAR_T is (NUL, ' ', '"', '#', [etc]);
type FUNNY_STR_T is array (POSITIVE range <>) of FUNNY_CHAR_T;
pragma PACK (FUNNY_STR_T);
type FUNNY_STRING_T (SIZE : NATURAL := 1) is
record
STR : FUNNY_STR_T (1 .. SIZE) := (others => '0');
LENGTH : NATURAL := 4;
end record;
TEST: FUNNY_STRING_T(100);
GDB is able to print the value of variable "test" and "test.str".
But not "test.str(1)":
(gdb) p test
$1 = (size => 100, str => (33 'A', nul <repeats 99 times>), length => 1)
(gdb) p test.str
$2 = (33 'A', nul <repeats 99 times>)
(gdb) p test.str(1)
object size is larger than varsize-limit
The problem occurs during the phase where we are trying to resolve
the expression subscript operation. On the one hand of the subscript
operator, we have the result of the evaluation of "test.str", which
is our packed array. We have the following code to handle packed
arrays in particular:
if (ada_is_constrained_packed_array_type
(desc_base_type (value_type (argvec[0]))))
argvec[0] = ada_coerce_to_simple_array (argvec[0]);
This eventually leads to a call to constrained_packed_array_type
to return the "simple array". This function relies on a parallel
___XA type, when available, to determine the bounds. In our case,
we find type...
failure__funny_string_t__T4b___XA"
... which has one field describing the bounds of our array as:
failure__funny_string_t__T3b___XDLU_1__size
The part that interests us is after the ___XD suffix or,
in other words: "LU_1__size". What this means in GNAT encoding
parlance is that the lower bound is 1, and that the upper bound
is the value of "size". "size" is our discriminant in this case.
Normally, we would access the record's discriminant in order to
get the upper bound's value, but we do not have that information,
here. We are in a mode where we are just trying to "fix" the type
without an actual value. This is what the call to to_fixed_range_type
is doing, and because the fix'ing fails, it ends up returning
the ___XDLU type unmodified as our index type.
This shouldn't be a problem, except that the later part of
constrained_packed_array_type then uses that index_type to
determine the array size, via a call to get_discrete_bounds.
The problem is that the upper bound of the ___XDLU type is
dynamic (in the DWARF sense) while get_discrete_bounds implicitly
assumes that the bounds are static, and therefore accesses
them using macros that assume the bounds values are constants:
case TYPE_CODE_RANGE:
*lowp = TYPE_LOW_BOUND (type);
*highp = TYPE_HIGH_BOUND (type);
This therefore returns a bogus value for the upper bound,
leading to an unexpectedly large size for our array, which
later triggers the varsize-limit guard we've seen above.
This patch avoids the problem by adding special handling
of dynamic range types. It also extends the documentation
of the constrained_packed_array_type function to document
what happens in this situation.
gdb/ChangeLog:
* ada-lang.c (constrained_packed_array_type): Set the length
of the return array as if both bounds where zero if that
returned array's index type is dynamic.
gdb/testsuite/ChangeLog:
* gdb.ada/pkd_arr_elem: New Testcase.
Tested on x86_64-linux.
Non-primary symtabs share the block vector with their primary symtabs.
In these cases there's no need to use ALL_SYMTABS.
gdb/ChangeLog:
* ada-lang.c (ada_make_symbol_completion_list): Use
ALL_PRIMARY_SYMTABS instead of ALL_SYMTABS.
* symtab.c (lookup_objfile_from_block): Ditto.
When trying to evaluate an expression which adds a pointer and
an integral, the evaluation succeeds if the pointer is on
the left handside of the operator, but not when it is on the right
handside:
(gdb) p something'address + 0
$1 = (system.address) 0x613418 <pck.something>
(gdb) p 0 + something'address
Argument to arithmetic operation not a number or boolean.
Same issue when doing subtractions:
(gdb) p something'address - 0
$2 = (system.address) 0x613418 <pck.something>
(gdb) p 0 - something'address
Argument to arithmetic operation not a number or boolean.
This patch enhances the Ada expression evaluator to handle
these two situations.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <BINOP_ADD>: Add handling
of the case where the second operand is a pointer.
<BINOP_SUB>: Likewise.
gdb/testsuite/ChangeLog:
* gdb.ada/addr_arith: New testcase.
Tested on x86_64-linux.
Trying to print the bounds or the length of a pointer to an array
whose bounds are dynamic results in the following error:
(gdb) p foo.three_ptr.all'first
Location address is not set.
(gdb) p foo.three_ptr.all'length
Location address is not set.
This is because, after having dereferenced our array pointer, we
use the type of the resulting array value, instead of the enclosing
type. The former is the original type where the bounds are unresolved,
whereas we need to get the actual array bounds.
Similarly, trying to apply those attributes to the array pointer
directly (without explicitly dereferencing it with the '.all'
operator) yields the same kind of error:
(gdb) p foo.three_ptr'first
Location address is not set.
(gdb) p foo.three_ptr'length
Location address is not set.
This is caused by the fact that the dereference was done implicitly
in this case, and perform at the type level only, which is not
sufficient in order to resolve the array type.
This patch fixes both issues, thus allowing us to get the expected output:
(gdb) p foo.three_ptr.all'first
$1 = 1
(gdb) p foo.three_ptr.all'length
$2 = 3
(gdb) p foo.three_ptr'first
$3 = 1
(gdb) p foo.three_ptr'length
$4 = 3
gdb/ChangeLog:
* ada-lang.c (ada_array_bound): If ARR is a TYPE_CODE_PTR,
dereference it first. Use value_enclosing_type instead of
value_type.
(ada_array_length): Likewise.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
Consider a pointer to an array which dynamic bounds, described in
DWARF as follow:
<1><25>: Abbrev Number: 4 (DW_TAG_array_type)
<26> DW_AT_name : foo__array_type
[...]
<2><3b>: Abbrev Number: 5 (DW_TAG_subrange_type)
[...]
<40> DW_AT_lower_bound : 5 byte block: 97 38 1c 94 4
(DW_OP_push_object_address; DW_OP_lit8; DW_OP_minus;
DW_OP_deref_size: 4)
<46> DW_AT_upper_bound : 5 byte block: 97 34 1c 94 4
(DW_OP_push_object_address; DW_OP_lit4; DW_OP_minus;
DW_OP_deref_size: 4)
GDB is now able to correctly print the entire array, but not one
element of the array. Eg:
(gdb) p foo.three_ptr.all
$1 = (1, 2, 3)
(gdb) p foo.three_ptr.all(1)
Cannot access memory at address 0xfffffffff4123a0c
The problem occurs because we are missing a dynamic resolution of
the variable's array type when subscripting the array. What the current
code does is "fix"-ing the array type using the GNAT encodings, but
that operation ignores any of the array's dynamic properties.
This patch fixes the issue by using ada_value_ind to dereference
the array pointer, which takes care of the array type resolution.
It also continues to "fix" arrays described using GNAT encodings,
so backwards compatibility is preserved.
gdb/ChangeLog:
* ada-lang.c (ada_value_ptr_subscript): Remove parameter "type".
Adjust function implementation and documentation accordingly.
(ada_evaluate_subexp) <OP_FUNCALL>: Only assign "type" if
NOSIDE is EVAL_AVOID_SIDE_EFFECTS.
Update call to ada_value_ptr_subscript.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
Now that the OP_VAR_VALUE section of this function has been reorganized
a bit, we can fall-back on standard evaluation when static fixing is
not required. This patch does that, but being exclusive about when
static fixing has to be used, rather than doing it all the time when
noside is EVAL_AVOID_SIDE_EFFECTS.
This will pave the way for later when we want to evaluate entities
that have no GNAT encodings related to them but dynamic properties
instead. In that case, we expect the standard evaluation to resolve
those dynamic properties for us, even in no-side-effect mode.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>:
When noside is EVAL_AVOID_SIDE_EFFECTS, only return a statically
fixed value for records and unions for which some GNAT encodings
are present.
The OP_VAR_VALUE branch in ada_evaluate_subexp is written with
multiple "if ... else if ... else if ... else ..." block. But
in practice, these blocks all either goto out of that block of
code, or return.
This patch rewrites this code slightly by replacing the "else if"-s
by simple "if"s. This should better reflect the ideal processing
where we try to do a standard eval whenever possible, and only
do something else when the standard eval does not work. On a pratical
level, this patch makes it easier to fall through to the default
processing when none of the special situations are detected, thus
making it easier to add more handlers of those special situations;
or to remove them as they no longer become necessary!
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Slight code
rewrite to avoid "else if" and "else" constructs. Should be
a no-op in practice.
I just happen to notice that a lexical block was missing one
indentation level.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Fix identation
of lexical block.
This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
Generally, the blockvector ought to be readonly. So, this patch makes
the blockvector const in the symtab, and also changes various
blockvector APIs to be const.
This patch has a couple of spots that cast away const. I consider
these to be ok because they occur in mdebugread and are used while
constructing the blockvector. I have added comments at these spots.
2014-06-18 Tom Tromey <tromey@redhat.com>
* symtab.h (struct symtab) <blockvector>: Now const.
* ada-lang.c (ada_add_global_exceptions): Update.
* buildsym.c (augment_type_symtab): Update.
* dwarf2read.c (dw2_lookup_symbol): Update.
* jit.c (finalize_symtab): Update.
* jv-lang.c (add_class_symtab_symbol): Update.
* mdebugread.c (parse_symbol, add_block, sort_blocks, new_symtab):
Update.
* objfiles.c (objfile_relocate1): Update.
* psymtab.c (lookup_symbol_aux_psymtabs)
(maintenance_check_psymtabs): Update.
* python/py-symtab.c (stpy_global_block, stpy_static_block):
Update.
* spu-tdep.c (spu_catch_start): Update.
* symmisc.c (dump_symtab_1): Update.
* symtab.c (lookup_global_symbol_from_objfile)
(lookup_symbol_aux_objfile, lookup_symbol_aux_quick)
(basic_lookup_transparent_type_quick)
(basic_lookup_transparent_type, find_pc_sect_symtab)
(find_pc_sect_line, search_symbols): Update.
* block.c (find_block_in_blockvector): Make "bl" const.
(blockvector_for_pc_sect, blockvector_for_pc): Make return type
const.
(blockvector_contains_pc): Make "bv" const.
(block_for_pc_sect): Update.
* block.h (blockvector_for_pc, blockvector_for_pc_sect)
(blockvector_contains_pc): Update.
* breakpoint.c (resolve_sal_pc): Update.
* inline-frame.c (block_starting_point_at): Update.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
It is valid in GNU C to have a VLA in a struct or union type, but gdb
did not handle this.
This patch adds support for these cases in the obvious way.
Built and regtested on x86-64 Fedora 20.
New tests included.
2014-06-04 Tom Tromey <tromey@redhat.com>
* ada-lang.c (ada_template_to_fixed_record_type_1): Use
value_from_contents_and_address_unresolved.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_which_variant_applies): Likewise.
* value.h (value_from_contents_and_address_unresolved): Declare.
* value.c (value_from_contents_and_address_unresolved): New
function.
* gdbtypes.c (is_dynamic_type, resolve_dynamic_type)
<TYPE_CODE_STRUCT, TYPE_CODE_UNION>: New cases.
(resolve_dynamic_struct, resolve_dynamic_union): New functions.
2014-06-04 Tom Tromey <tromey@redhat.com>
* gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
VLA-in-union.
* gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
inner_vla_struct, vla_union types. Initialize objects of those
types and compute their sizes.
Consider the following declaration in Ada...
type Array_Type is array (L .. U) of Natural;
... where L and U are parameters of the function where the declaration
above was made. At the moment, GDB relies on descriptive types in order
to properly decode the array bounds. For instance, if L was 5, and U
was 10, we would see the following:
(gdb) ptype array_type
type = array (5 .. 10) of natural
(gdb) maintenance set ada ignore-descriptive-types
(gdb) ptype array_type
type = array (1 .. 28544912) of natural
This patch enhances ada_discrete_type_{high,low}_bound to resolve
any dynamicity. This is sufficient to fix the case of the upper bound.
For the lower bound, the dwarf2read module does not handle dynamic
lower bounds yet, but once it does, the lower bound should be correctly
handled as well [1].
gdb/ChangeLog:
* ada-lang.c (ada_discrete_type_high_bound): Resolve the type's
dynamic bounds before computing its upper bound.
(ada_discrete_type_low_bound): Same as above with the lower bound.
[1]: The reason why we do not enhance dwarf2read to handle dynamic
lower bounds ahead of this patch is because it unveils some latent
issues such as this one.
In ada-lang.c::ada_evaluate_subexp, case OP_VAR_VALUE, when noside
is EVAL_AVOID_SIDE_EFFECTS, the first thing we do is set type as
follow:
type = static_unwrap_type (SYMBOL_TYPE (exp->elts[pc + 2].symbol));
Later on in the same block, we make the same call:
return value_zero
(to_static_fixed_type
(static_unwrap_type (SYMBOL_TYPE (exp->elts[pc + 2].symbol))),
not_lval);
This patch removes the second call, since it should result in the same
type being returned, so no point in making that call again.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_VAR_VALUE>: Remove
unnecessary second call to static_unwrap_type.
Jerome Guitton
Joel Brobecker
Pierre-Marie de Rodat
Pedro Alves
Gary Benson
Doug Evans
Tom Tromey
Keith Seitz