This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
gdbserver's init_register_cache has some preprocessor conditionals
awkwardly nested around an if..else block. This commit moves the
conditionals inside the braces to make the code more readable.
gdb/gdbserver/
2014-08-06 Gary Benson <gbenson@redhat.com>
* regcache.c (init_register_cache): Move conditionals inside if.
This commit replaces a hardwired target-is-async check.
gdb/gdbserver/
2014-08-06 Gary Benson <gbenson@redhat.com>
* linux-low.c (linux_supports_non_stop): Use target_is_async_p.
This commit removes all inclusions of defs.h and server.h from header
files.
gdb/
2014-07-31 Gary Benson <gbenson@redhat.com>
* common/btrace-common.h: Do not include defs.h or server.h.
* nat/mips-linux-watch.h: Likewise.
* gdb-dlfcn.h: Do not include defs.h.
* tracefile.h: Likewise.
gdb/gdbserver/
2014-07-31 Gary Benson <gbenson@redhat.com>
* ax.h: Do not include server.h.
* gdbthread.h: Likewise.
* lynx-low.h: Likewise.
* notif.h: Likewise.
This commit creates a new header, common/common-defs.h, to hold
definitions common to all code under gdb/. Both gdb/defs.h and
gdb/gdbserver/server.h are modified to include common-defs.h as
their first non-comment line; all code under gdb/ includes either
defs.h or server.h as appropriate, so common-defs.h will be the
first actual code the compiler sees.
For this initial commit common-defs.h includes only the two
config.h files. Future commits will move more code currently
duplicated across defs.h and server.h such that shared code in
gdb/{common,target,nat} can be modified to include common-defs.h
rather than defs.h or server.h.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h.
* defs.h: Include common-defs.h.
Do not include config.h or build-gnulib/config.h.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* server.h: Include common-defs.h.
Do not include config.h or build-gnulib-gdbserver/config.h.
This commit makes all source files under gdb/ that include headers
from gdb/ include either defs.h or server.h before any other code.
This ensures that definitions and macros from the two config.h files
are always in place for our code. An exception has been made for
gdb/gdbserver/gdbreplay.c which seems to be a special case.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* btrace.c: Include defs.h.
* common/ptid.c: Include defs.h or server.h as appropriate.
* nat/mips-linux-watch.c: Likewise.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* hostio-errno.c: Move server.h to top of includes list.
* inferiors.c: Likewise.
* linux-x86-low.c: Likewise.
* notif.c: Include server.h.
gdbserver defines CORE_ADDR to be signed. This seems erroneous to
me; and furthermore likely to cause problems in common/, as it is
different from gdb's definition.
gdb/gdbserver/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* server.h (CORE_ADDR): Now unsigned.
Since we use tkill everywhere, using kill to try to kill each lwp
individually looks suspiciously odd. We should really be using tgkill
everywhere, but at least while we don't get there this makes us
consistent.
gdb/gdbserver/
2014-07-16 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill_one_lwp): Use kill_lwp, not kill.
gdb/
2014-07-16 Pedro Alves <palves@redhat.com>
* linux-nat.c (kill_callback): Use kill_lwp, not kill.
Although most compilers follow right-to-left evaluation order, the
order of evaluation of a function call's arguments is really
unspecified. target_pid_to_str or ptid_of may well clobber errno when
we get to evaluate the third argument to debug_printf.
gdb/gdbserver/
2014-07-15 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill_one_lwp): Save errno and work with saved
copy.
Here's an example, with the new test:
gdbserver :9999 gdb.threads/kill
gdb gdb.threads/kill
(gdb) b 52
Breakpoint 1 at 0x4007f4: file kill.c, line 52.
Continuing.
Breakpoint 1, main () at kill.c:52
52 return 0; /* set break here */
(gdb) k
Kill the program being debugged? (y or n) y
gdbserver :9999 gdb.threads/kill
Process gdb.base/watch_thread_num created; pid = 9719
Listening on port 1234
Remote debugging from host 127.0.0.1
Killing all inferiors
Segmentation fault (core dumped)
Backtrace:
(gdb) bt
#0 0x00000000004068a0 in find_inferior (list=0x66b060 <all_threads>, func=0x427637 <kill_one_lwp_callback>, arg=0x7fffffffd3fc) at src/gdb/gdbserver/inferiors.c:199
#1 0x00000000004277b6 in linux_kill (pid=15708) at src/gdb/gdbserver/linux-low.c:966
#2 0x000000000041354d in kill_inferior (pid=15708) at src/gdb/gdbserver/target.c:163
#3 0x00000000004107e9 in kill_inferior_callback (entry=0x6704f0) at src/gdb/gdbserver/server.c:2934
#4 0x0000000000406522 in for_each_inferior (list=0x66b050 <all_processes>, action=0x4107a6 <kill_inferior_callback>) at src/gdb/gdbserver/inferiors.c:57
#5 0x0000000000412377 in process_serial_event () at src/gdb/gdbserver/server.c:3767
#6 0x000000000041267c in handle_serial_event (err=0, client_data=0x0) at src/gdb/gdbserver/server.c:3880
#7 0x00000000004189ff in handle_file_event (event_file_desc=4) at src/gdb/gdbserver/event-loop.c:434
#8 0x00000000004181c6 in process_event () at src/gdb/gdbserver/event-loop.c:189
#9 0x0000000000418f45 in start_event_loop () at src/gdb/gdbserver/event-loop.c:552
#10 0x0000000000411272 in main (argc=3, argv=0x7fffffffd8d8) at src/gdb/gdbserver/server.c:3283
The problem is that linux_wait_for_event deletes lwps that have exited
(even those not passed in as lwps of interest), while the lwp/thread
list is being walked on with find_inferior. find_inferior can handle
the current iterated inferior being deleted, but not others.
When killing lwps, we don't really care about any of the pending
status handling of linux_wait_for_event. We can just waitpid the lwps
directly, which is also what GDB does (see
linux-nat.c:kill_wait_callback). This way the lwps are not deleted
while we're walking the list. They'll be deleted by linux_mourn
afterwards.
This crash triggers several times when running the testsuite against
GDBserver with the native-gdbserver board (target remote), but as GDB
can't distinguish between GDBserver crashing and "kill" being
sucessful, as in both cases the connection is closed (the 'k' packet
doesn't require a reply), and the inferior is gone, that results in no
FAIL.
The patch adds a generic test that catches the issue with
extended-remote mode (and works fine with native testing too). Here's
how it fails with the native-extended-gdbserver board without the fix:
(gdb) info threads
Id Target Id Frame
6 Thread 15367.15374 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
5 Thread 15367.15373 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
4 Thread 15367.15372 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
3 Thread 15367.15371 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
2 Thread 15367.15370 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
* 1 Thread 15367.15367 main () at .../gdb.threads/kill.c:52
(gdb) kill
Kill the program being debugged? (y or n) y
Remote connection closed
^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) FAIL: gdb.threads/kill.exp: kill
Extended remote should remain connected after the kill.
gdb/gdbserver/
2014-07-11 Pedro Alves <palves@redhat.com>
* linux-low.c (kill_wait_lwp): New function, based on
kill_one_lwp_callback, but use my_waitpid directly.
(kill_one_lwp_callback, linux_kill): Use it.
gdb/testsuite/
2014-07-11 Pedro Alves <palves@redhat.com>
* gdb.threads/kill.c: New file.
* gdb.threads/kill.exp: New file.
This patch fixes this on x86 Linux:
(gdb) watch *buf@2
Hardware watchpoint 8: *buf@2
(gdb) si
0x00000000004005a7 34 for (i = 0; i < 100000; i++); /* stepi line */
(gdb) del
Delete all breakpoints? (y or n) y
(gdb) watch *(buf+1)@1
Hardware watchpoint 9: *(buf+1)@1
(gdb) si
0x00000000004005a7 in main () at ../../../src/gdb/testsuite/gdb.base/watchpoint-reuse-slot.c:34
34 for (i = 0; i < 100000; i++); /* stepi line */
Couldn't write debug register: Invalid argument.
(gdb)
In the example above the debug registers are being switched from this
state:
CONTROL (DR7): 0000000000050101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601040, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
to this:
CONTROL (DR7): 0000000000010101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601041, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
That is, before, DR7 was setup for watching a 2 byte region starting
at what's in DR0 (0x601040).
And after, DR7 is setup for watching a 1 byte region starting at
what's in DR0 (0x601041).
We always write DR0..DR3 before DR7, because if we enable a slot's
bits in DR7, you need to have already written the corresponding
DR0..DR3 registers -- the kernel rejects the DR7 write with EINVAL
otherwise.
The error shown above is the opposite scenario. When we try to write
0x601041 to DR0, DR7's bits still indicate intent of watching a 2-byte
region. That DR0/DR7 combination is invalid, because 0x601041 is
unaligned. To watch two bytes, we'd have to use two slots. So the
kernel errors out with EINVAL.
Fix this by always first clearing DR7, then writing DR0..DR3, and then
setting DR7's bits.
A little optimization -- if we're disabling the last watchpoint, then
we can clear DR7 just once. The changes to nat/i386-dregs.c make that
easier to detect, and as bonus, they make it a little easier to make
sense of DR7 in the debug logs, as we no longer need to remember we're
seeing stale bits.
Tested on x86_64 Fedora 20, native and GDBserver.
This adds an exhaustive test that switches between many different
combinations of watchpoint types and addresses and widths.
gdb/
2014-06-23 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_prepare_to_resume): Clear
DR_CONTROL before setting DR0..DR3.
* i386-linux-nat.c (i386_linux_prepare_to_resume): Likewise.
* nat/i386-dregs.c (i386_remove_aligned_watchpoint): Clear all
bits of DR_CONTROL related to the debug register slot being
disabled. If all slots are vacant, clear local slowdown as well,
and assert DR_CONTROL is 0.
gdb/gdbserver/
2014-06-23 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_linux_prepare_to_resume): Clear DR_CONTROL
before setting DR0..DR3.
gdb/testsuite/
2014-06-23 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-reuse-slot.c: New file.
* gdb.base/watchpoint-reuse-slot.exp: New file.
This commit makes gdbserver access the x86 debug register accessor
functions via the same function vector as GDB proper. This removes
a chunk of conditional code that was previously in i386-{nat,low}.h
and leaves a single macro as the only GDB/gdbserver difference in
nat/i386-dregs.c.
gdb/
2014-06-20 Gary Benson <gbenson@redhat.com>
* i386-nat.h (debug_hw_points): Moved to nat/i386-dregs.c.
(i386_dr_low_type): Moved to nat/i386-dregs.h.
(i386_dr_low): Likewise.
(i386_dr_low_can_set_addr): Moved to nat/i386-dregs.c.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
* nat/i386-dregs.h (i386_dr_low_type): Moved from i386-nat.h.
(i386_dr_low): Likewise.
* nat/i386-dregs.c (i386-low.h): Remove include.
(i386-nat.h): Likewise.
(nat/i386-dregs.h): New include.
(i386_dr_low_can_set_addr): Moved from i386-nat.h.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
(debug_hw_points): Likewise.
gdb/gdbserver/
2014-06-20 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_dr_low_can_set_addr): Removed.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_get_debug_register_length): Likewise.
* linux-x86-low.c (i386_dr_low_set_addr):
Changed signature. Made static.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low): New global variable.
* win32-i386-low.c (i386_dr_low_set_addr):
Changed signature. Made static.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low): New global variable.
The recent libiberty patch caused issues when cross building
gdbserver. The Makefile ends invoking the build machine's "ar"
instead of the --host version:
ar ./libiberty.a \
./regex.o (...)
ar: illegal option -- .
Usage: ar [emulation options] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file file...
ar -M [<mri-script]
The libiberty configure script does probe for and finds an appropriate
AR. However, gdbserver's configure does not probe for AR and
overrides the AR used in the libiberty build by explicitly passing AR
to the sub-builds.
gdb/gdbserver/
2014-06-20 Marcus Shawcroft <marcus.shawcroft@arm.com>
* configure.ac: Invoke. AC_CHECK_TOOL(AR, ar).
* Makefile.in (AR, AR_FLAGS): Define.
* configure: Regenerate.
The above commit did two things:
1) A number of functions were renamed and made nonstatic.
2) A number of other functions were renamed only.
This commit reverts #1 but not #2. In addition, prototypes for
functions now remade static have been removed from i386-dregs.h.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_dr_show): Renamed to
i386_show_dr and made static. All uses updated.
(i386_dr_length_and_rw_bits): Renamed to
i386_length_and_rw_bits and made static.
All uses updated.
(i386_dr_insert_aligned_watchpoint): Renamed to
i386_insert_aligned_watchpoint and made static.
All uses updated.
(i386_dr_remove_aligned_watchpoint): Renamed to
i386_remove_aligned_watchpoint and made static.
All uses updated.
(i386_dr_update_inferior_debug_regs): Renamed to
i386_update_inferior_debug_regs and made static.
All uses updated.
* nat/i386-dregs.h (i386_dr_show): Removed.
(i386_dr_length_and_rw_bits): Likewise.
(i386_dr_insert_aligned_watchpoint): Likewise.
(i386_dr_remove_aligned_watchpoint): Likewise.
(i386_dr_update_inferior_debug_regs): Likewise.
gdb/gdbserver/
2014-06-19 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_dr_show): Renamed to
i386_show_dr and made static. All uses updated.
(i386_dr_length_and_rw_bits): Renamed to
i386_length_and_rw_bits and made static.
All uses updated.
(i386_dr_insert_aligned_watchpoint): Renamed to
i386_insert_aligned_watchpoint and made static.
All uses updated.
(i386_dr_remove_aligned_watchpoint): Renamed to
i386_remove_aligned_watchpoint and made static.
All uses updated.
(i386_dr_update_inferior_debug_regs): Renamed to
i386_update_inferior_debug_regs and made static.
All uses updated.
This commit renames the functions that are to be shared.
Functions to be shared that were static are made nonstatic.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_show_dr): Renamed to
i386_dr_show and made nonstatic. All uses updated.
(i386_length_and_rw_bits): Renamed to
i386_dr_length_and_rw_bits and made nonstatic.
All uses updated.
(i386_insert_aligned_watchpoint): Renamed to
i386_dr_insert_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_remove_aligned_watchpoint): Renamed to
i386_dr_remove_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_update_inferior_debug_regs): Renamed to
i386_dr_update_inferior_debug_regs and made nonstatic.
All uses updated.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_low_insert_watchpoint): Renamed to
i386_dr_insert_watchpoint.
(i386_low_remove_watchpoint): Renamed to
i386_dr_remove_watchpoint.
(i386_low_region_ok_for_watchpoint): Renamed to
i386_dr_region_ok_for_watchpoint.
(i386_low_stopped_data_address): Renamed to
i386_dr_stopped_data_address.
(i386_low_stopped_by_watchpoint): Renamed to
i386_dr_stopped_by_watchpoint.
* i386-low.c (i386_show_dr): Renamed to
i386_dr_show and made nonstatic. All uses updated.
(i386_length_and_rw_bits): Renamed to
i386_dr_length_and_rw_bits and made nonstatic.
All uses updated.
(i386_insert_aligned_watchpoint): Renamed to
i386_dr_insert_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_remove_aligned_watchpoint): Renamed to
i386_dr_remove_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_update_inferior_debug_regs): Renamed to
i386_dr_update_inferior_debug_regs and made nonstatic.
All uses updated.
(i386_low_insert_watchpoint): Renamed to
i386_dr_insert_watchpoint. All uses updated.
(i386_low_remove_watchpoint): Renamed to
i386_dr_remove_watchpoint. All uses updated.
(i386_low_region_ok_for_watchpoint): Renamed to
i386_dr_region_ok_for_watchpoint. All uses updated.
(i386_low_stopped_data_address): Renamed to
i386_dr_stopped_data_address. All uses updated.
(i386_low_stopped_by_watchpoint): Renamed to
i386_dr_stopped_by_watchpoint. All uses updated.
This commit adds macros to abstract access to the i386_dr_low
function vector used by i386-nat.c. The macros are named so
as to match the names of the functions that do the same work
in gdbserver.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_dr_low_can_set_addr): New macro.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_insert_aligned_watchpoint): Use new macros.
(i386_update_inferior_debug_regs): Likewise.
(i386_stopped_data_address): Likewise.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_dr_low_can_set_addr): New macro.
(i386_dr_low_can_set_control): Likewise.
(i386_insert_aligned_watchpoint): New check.
This commit synchronizes the i386_update_inferior_debug_regs functions
in i386-nat.c and i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_update_inferior_debug_regs) <state>:
New parameter. All uses updated.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_update_inferior_debug_regs) <inf_state>:
Renamed to state.
This commit makes all error handling in i386-low.c use internal_error
rather than fatal and error.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_length_and_rw_bits): Use internal_error
instead of fatal and error.
(i386_handle_nonaligned_watchpoint): Likewise.
This commit synchronizes the debug printing code in i386-nat.c and
i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (debug_printf): New macro.
(i386_get_debug_register_length): Likewise.
(TARGET_HAS_DR_LEN_8): Use above macro.
(i386_show_dr): Use debug_printf instead of puts_unfiltered
and printf_unfiltered. Use phex to format values.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_get_debug_register_length): New macro.
(TARGET_HAS_DR_LEN_8): Remove conditional. Use above macro.
(i386_show_dr): Use debug_printf instead of fprintf. Use
phex to format values.
This commit fixes various whitespace differences between i386-nat.c
and i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c: Whitespace changes.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c: Whitespace changes.
gdbserver defines freeargv, but it is now trivial to just use the one
in libiberty.
2014-06-12 Tom Tromey <tromey@redhat.com>
* utils.c (freeargv): Remove.
This builds a libiberty just for gdbserver and arranges for gdbserver
to use it. I've tripped across the lack of libiberty in gdbserver at
least once, and I have seen other threads where it would have been
useful.
2014-06-12 Tom Tromey <tromey@redhat.com>
* debug.c (debug_printf): Remove HAVE_GETTIMEOFDAY checks.
* server.c (monitor_show_help): Remove HAVE_GETTIMEOFDAY check.
(parse_debug_format_options): Likewise.
(gdbserver_usage): Likewise.
* Makefile.in (LIBIBERTY_BUILDDIR, LIBIBERTY): New variables.
(SUBDIRS, REQUIRED_SUBDIRS): Add libiberty.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Depend on and link
against libiberty.
($(LIBGNU)): Depend on libiberty.
(all-lib): Recurse into all subdirs.
(install-only): Invoke "install" target in subdirs.
(vasprintf.o, vsnprintf.o, safe-ctype.o, lbasename.o): Remove
targets.
* configure: Rebuild.
* configure.ac: Add ACX_CONFIGURE_DIR for libiberty. Don't check
for vasprintf, vsnprintf, or gettimeofday.
* configure.srv: Don't add safe-ctype.o or lbasename.o to
srv_tgtobj.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
If GDB decides to change the breakpoint's conditions or commands,
it'll reinsert the same breakpoint again, with the new options
attached, without deleting the previous breakpoint. E.g.,
(gdb) set breakpoint always-inserted on
(gdb) b main if 0
Breakpoint 1 at 0x400594: file foo.c, line 21.
Sending packet: $Z0,400594,1;X3,220027#68...Packet received: OK
(gdb) b main
Breakpoint 15 at 0x400594: file foo.c, line 21.
Sending packet: $Z0,400594,1#49...Packet received: OK
GDBserver understands this and deletes the breakpoint's previous
conditions. But, it forgets to delete the previous commands.
gdb/gdbserver/
2014-06-02 Pedro Alves <palves@redhat.com>
* ax.c (gdb_free_agent_expr): New function.
* ax.h (gdb_free_agent_expr): New declaration.
* mem-break.c (delete_gdb_breakpoint_1): Also clear the commands
list.
(clear_breakpoint_conditions, clear_breakpoint_commands): Make
static.
(clear_breakpoint_conditions_and_commands): New function.
* mem-break.h (clear_breakpoint_conditions): Delete declaration.
(clear_breakpoint_conditions_and_commands): New declaration.
A recent change to glibc removed asm/ptrace.h from user.h for AArch64.
This meant that cross-native builds of gdbserver using trunk glibc broke
because linux-aarch64-low.c because user_hwdebug_state couldn't be found.
This is like commit #036cd38182bde32d8297b630cd5c861d53b8949e
2014-05-23 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* linux-aarch64-low.c (asm/ptrace.h): Include.
I have posted:
TLS variables access for -static -lpthread executables
https://sourceware.org/ml/libc-help/2014-03/msg00024.html
and the GDB patch below has been confirmed as OK for current glibcs.
Further work should be done for newer glibcs:
Improve TLS variables glibc compatibility
https://sourceware.org/bugzilla/show_bug.cgi?id=16954
Still the patch below implements the feature in a fully functional way backward
compatible with current glibcs, it depends on the following glibc source line:
csu/libc-tls.c
main_map->l_tls_modid = 1;
gdb/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* linux-thread-db.c (struct thread_db_info): Add td_thr_tlsbase_p.
(try_thread_db_load_1): Initialize it.
(thread_db_get_thread_local_address): Call it if LM is zero.
* target.c (target_translate_tls_address): Remove LM_ADDR zero check.
* target.h (struct target_ops) (to_get_thread_local_address): Add
load_module_addr comment.
gdb/gdbserver/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdbserver/thread-db.c (struct thread_db): Add td_thr_tlsbase_p.
(thread_db_get_tls_address): Call it if LOAD_MODULE is zero.
(thread_db_load_search, try_thread_db_load_1): Initialize it.
gdb/testsuite/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
<HAVE_TLS> (thread_function, main): Initialize it.
* gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
Add clean_restart.
<$have_tls != "">: Check TLSVAR.
Message-ID: <20140410115204.GB16411@host2.jankratochvil.net>
This patch fixes hardware breakpoint regressions exposed by my fix for
"PR breakpoints/7143 - Watchpoint does not trigger when first set", at
https://sourceware.org/ml/gdb-patches/2014-03/msg00167.html
The testsuite caught them on Linux/x86_64, at least. gdb.sum:
gdb.sum:
FAIL: gdb.base/hbreak2.exp: next over recursive call
FAIL: gdb.base/hbreak2.exp: backtrace from factorial(5.1)
FAIL: gdb.base/hbreak2.exp: continue until exit at recursive next test
gdb.log:
(gdb) next
Program received signal SIGTRAP, Trace/breakpoint trap.
factorial (value=4) at ../../../src/gdb/testsuite/gdb.base/break.c:113
113 if (value > 1) { /* set breakpoint 7 here */
(gdb) FAIL: gdb.base/hbreak2.exp: next over recursive call
Actually, that patch just exposed a latent issue to "breakpoints
always-inserted off" mode, not really caused it. After that patch,
GDB no longer removes breakpoints at each internal event, thus making
some scenarios behave like breakpoint always-inserted on. The bug is
easy to trigger with always-inserted on.
The issue is that since the target-side breakpoint conditions support,
if the stub/server supports evaluating breakpoint conditions on the
target side, then GDB is sending duplicate Zx packets to the target
without removing them before, and GDBserver is not really expecting
that for Z packets other than Z0/z0. E.g., with "set breakpoint
always-inserted on" and "set debug remote 1":
(gdb) b main
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) b main
Note: breakpoint 4 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) b main
Note: breakpoints 4 and 5 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $Z0,410943,1#48...Packet received: OK
Sending packet: $Z0,410943,1#48...Packet received: OK
Sending packet: $z0,410943,1#68...Packet received: OK
And for Z1, similarly:
(gdb) hbreak main
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Packet Z1 (hardware-breakpoint) is supported
(gdb) hbreak main
Note: breakpoint 4 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
(gdb) hbreak main
Note: breakpoints 4 and 5 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Sending packet: $z1,410943,1#69...Packet received: OK
^^^^^^^^^^^^
So GDB sent a bunch of Z1 packets, and then when finally removing the
breakpoint, only one z1 packet was sent. On the GDBserver side (with
monitor set debug-hw-points 1), in the Z1 case, we see:
$ ./gdbserver :9999 ./gdbserver
Process ./gdbserver created; pid = 8629
Listening on port 9999
Remote debugging from host 127.0.0.1
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=1 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=2 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=3 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=5 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
remove_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
That's one insert_watchpoint call for each Z1 packet, and then one
remove_watchpoint call for the z1 packet. Notice how ref.count
increased for each insert_watchpoint call, and then in the end, after
GDB told GDBserver to forget about the hardware breakpoint, GDBserver
ends with the the first debug register still with ref.count=4! IOW,
the hardware breakpoint is left armed on the target, while on the GDB
end it's gone. If the program happens to execute 0x410943 afterwards,
then the CPU traps, GDBserver reports the trap to GDB, and GDB not
having a breakpoint set at that address anymore, reports to the user a
spurious SIGTRAP.
This is exactly what is happening in the hbreak2.exp test, though in
that case, it's a shared library event that triggers a
breakpoint_re_set, when breakpoints are still inserted (because
nowadays GDB doesn't remove breakpoints while handling internal
events), and that recreates breakpoint locations, which likewise
forces breakpoint reinsertion and Zx packet resends...
That is a lot of bogus Zx duplication that should possibly be
addressed on the GDB side. GDB resends Zx packets because the way to
change the target-side condition, is to resend the breakpoint to the
server with the new condition. (That's an option in the packet: e.g.,
"Z1,410943,1;X3,220027" for "hbreak main if 0". The packets in the
examples above are shorter because the breakpoints don't have
conditions attached). GDB doesn't remove the breakpoint first before
reinserting it because that'd be bad for non-stop, as it'd open a
window where the inferior could miss the breakpoint. The conditions
actually haven't changed between the resends, but GDB isn't smart
enough to realize that.
(TBC, if the target doesn't support target-side conditions, then GDB
doesn't trigger these resends (init_bp_location calls
mark_breakpoint_location_modified, and that does nothing if condition
evaluation is on the host side. The resends are caused by the
'loc->condition_changed = condition_modified.' line.)
But, even if GDB was made smarter, GDBserver should really still
handle the resends anyway. So target-side conditions also aren't
really to blame. The documentation of the Z/z packets says:
"To avoid potential problems with duplicate packets, the operations
should be implemented in an idempotent way."
As such, we may want to fix GDB, but we should definitely fix
GDBserver. The fix is a prerequisite for target-side conditions on
hardware breakpoints anyway (and while at it, on watchpoints too).
GDBserver indeed already treats duplicate Z0 packets in an idempotent
way. mem-break.c has the concept of high-level and low-level
breakpoints, somewhat similar to GDB's split of breakpoints vs
breakpoint locations, and keeps track of multiple breakpoints
referencing the same address/location, for the case of an internal
GDBserver breakpoint or a tracepoint being set at the same address as
a GDB breakpoint. But, it only allows GDB to ever contribute one
reference to a software breakpoint location. IOW, if gdbserver sees a
Z0 packet for the same address where it already had a GDB breakpoint
set, then GDBserver won't create another high-level GDB breakpoint.
However, mem-break.c only tracks GDB Z0 breakpoints. The same logic
should apply to all kinds of Zx packets. Currently, gdbserver passes
down each duplicate Zx (other than Z0) request directly to the
target->insert_point routine. The x86 watchpoint support itself
refcounts watchpoint / hw breakpoint requests, to handle overlapping
watchpoints, and save debug registers. But that code doesn't (and
really shouldn't) handle the duplicate requests, assuming that for
each insert there will be a corresponding remove.
So the fix is to generalize mem-break.c to track all kinds of Zx
breakpoints, and filter out duplicates. As mentioned, this ends up
adding support for target-side conditions on hardware breakpoints and
watchpoints too (though GDB itself doesn't support the latter yet).
Probably the least obvious change in the patch is that it kind of
turns the breakpoint insert/remove APIs inside out. Before, the
target methods were only called for GDB breakpoints. The internal
breakpoint set/delete methods inserted memory breakpoints directly
bypassing the insert/remove target methods. That's not good when the
target should use a debug API to set software breakpoints, instead of
relying on GDBserver patching memory with breakpoint instructions, as
is the case of NTO.
Now removal/insertion of all kinds of breakpoints/watchpoints, either
internal, or from GDB, always go through the target methods. The
insert_point/remove_point methods no longer get passed a Z packet
type, but an internal/raw breakpoint type. They're also passed a
pointer to the raw breakpoint itself (note that's still opaque outside
mem-break.c), so that insert_memory_breakpoint /
remove_memory_breakpoint have access to the breakpoint's shadow
buffer. I first tried passing down a new structure based on GDB's
"struct bp_target_info" (actually with that name exactly), but then
decided against it as unnecessary complication.
As software/memory breakpoints work by poking at memory, when setting
a GDB Z0 breakpoint (but not internal breakpoints, as those can assume
the conditions are already right), we need to tell the target to
prepare to access memory (which on Linux means stop threads). If that
operation fails, we need to return error to GDB. Seeing an error, if
this is the first breakpoint of that type that GDB tries to insert,
GDB would then assume the breakpoint type is supported, but it may
actually not be. So we need to check whether the type is supported at
all before preparing to access memory. And to solve that, the patch
adds a new target->supports_z_point_type method that is called before
actually trying to insert the breakpoint.
Other than that, hopefully the change is more or less obvious.
New test added that exercises the hbreak2.exp regression in a more
direct way, without relying on a breakpoint re-set happening before
main is reached.
Tested by building GDBserver for:
aarch64-linux-gnu
arm-linux-gnueabihf
i686-pc-linux-gnu
i686-w64-mingw32
m68k-linux-gnu
mips-linux-gnu
mips-uclinux
nios2-linux-gnu
powerpc-linux-gnu
sh-linux-gnu
tilegx-unknown-linux-gnu
x86_64-redhat-linux
x86_64-w64-mingw32
And also regression tested on x86_64 Fedora 20.
gdb/gdbserver/
2014-05-20 Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_insert_point)
(aarch64_remove_point): No longer check whether the type is
supported here. Adjust to new interface.
(the_low_target): Install aarch64_supports_z_point_type as
supports_z_point_type method.
* linux-arm-low.c (raw_bkpt_type_to_arm_hwbp_type): New function.
(arm_linux_hw_point_initialize): Take an enum raw_bkpt_type
instead of a Z packet char. Adjust.
(arm_supports_z_point_type): New function.
(arm_insert_point, arm_remove_point): Adjust to new interface.
(the_low_target): Install arm_supports_z_point_type.
* linux-crisv32-low.c (cris_supports_z_point_type): New function.
(cris_insert_point, cris_remove_point): Adjust to new interface.
Don't check whether the type is supported here.
(the_low_target): Install cris_supports_z_point_type.
* linux-low.c (linux_supports_z_point_type): New function.
(linux_insert_point, linux_remove_point): Adjust to new interface.
* linux-low.h (struct linux_target_ops) <insert_point,
remove_point>: Take an enum raw_bkpt_type instead of a char. Add
raw_breakpoint pointer parameter.
<supports_z_point_type>: New method.
* linux-mips-low.c (mips_supports_z_point_type): New function.
(mips_insert_point, mips_remove_point): Adjust to new interface.
Use mips_supports_z_point_type.
(the_low_target): Install mips_supports_z_point_type.
* linux-ppc-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-s390-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-sparc-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-x86-low.c (x86_supports_z_point_type): New function.
(x86_insert_point): Adjust to new insert_point interface. Use
insert_memory_breakpoint. Adjust to new
i386_low_insert_watchpoint interface.
(x86_remove_point): Adjust to remove_point interface. Use
remove_memory_breakpoint. Adjust to new
i386_low_remove_watchpoint interface.
(the_low_target): Install x86_supports_z_point_type.
* lynx-low.c (lynx_target_ops): Install NULL as
supports_z_point_type callback.
* nto-low.c (nto_supports_z_point_type): New.
(nto_insert_point, nto_remove_point): Adjust to new interface.
(nto_target_ops): Install nto_supports_z_point_type.
* mem-break.c: Adjust intro comment.
(struct raw_breakpoint) <raw_type, size>: New fields.
<inserted>: Update comment.
<shlib_disabled>: Delete field.
(enum bkpt_type) <gdb_breakpoint>: Delete value.
<gdb_breakpoint_Z0, gdb_breakpoint_Z1, gdb_breakpoint_Z2,
gdb_breakpoint_Z3, gdb_breakpoint_Z4>: New values.
(raw_bkpt_type_to_target_hw_bp_type): New function.
(find_enabled_raw_code_breakpoint_at): New function.
(find_raw_breakpoint_at): New type and size parameters. Use them.
(insert_memory_breakpoint): New function, based off
set_raw_breakpoint_at.
(remove_memory_breakpoint): New function.
(set_raw_breakpoint_at): Reimplement.
(set_breakpoint): New, based on set_breakpoint_at.
(set_breakpoint_at): Reimplement.
(delete_raw_breakpoint): Go through the_target->remove_point
instead of assuming memory breakpoints.
(find_gdb_breakpoint_at): Delete.
(Z_packet_to_bkpt_type, Z_packet_to_raw_bkpt_type): New functions.
(find_gdb_breakpoint): New function.
(set_gdb_breakpoint_at): Delete.
(z_type_supported): New function.
(set_gdb_breakpoint_1): New function, loosely based off
set_gdb_breakpoint_at.
(check_gdb_bp_preconditions, set_gdb_breakpoint): New functions.
(delete_gdb_breakpoint_at): Delete.
(delete_gdb_breakpoint_1): New function, loosely based off
delete_gdb_breakpoint_at.
(delete_gdb_breakpoint): New function.
(clear_gdb_breakpoint_conditions): Rename to ...
(clear_breakpoint_conditions): ... this. Don't handle a NULL
breakpoint.
(add_condition_to_breakpoint): Make static.
(add_breakpoint_condition): Take a struct breakpoint pointer
instead of an address. Adjust.
(gdb_condition_true_at_breakpoint): Rename to ...
(gdb_condition_true_at_breakpoint_z_type): ... this, and add
z_type parameter.
(gdb_condition_true_at_breakpoint): Reimplement.
(add_breakpoint_commands): Take a struct breakpoint pointer
instead of an address. Adjust.
(gdb_no_commands_at_breakpoint): Rename to ...
(gdb_no_commands_at_breakpoint_z_type): ... this. Add z_type
parameter. Return true if no breakpoint was found. Change debug
output.
(gdb_no_commands_at_breakpoint): Reimplement.
(run_breakpoint_commands): Rename to ...
(run_breakpoint_commands_z_type): ... this. Add z_type parameter,
and change return type to boolean.
(run_breakpoint_commands): New function.
(gdb_breakpoint_here): Also check for Z1 breakpoints.
(uninsert_raw_breakpoint): Don't try to reinsert a disabled
breakpoint. Go through the_target->remove_point instead of
assuming memory breakpoint.
(uninsert_breakpoints_at, uninsert_all_breakpoints): Uninsert
software and hardware breakpoints.
(reinsert_raw_breakpoint): Go through the_target->insert_point
instead of assuming memory breakpoint.
(reinsert_breakpoints_at, reinsert_all_breakpoints): Reinsert
software and hardware breakpoints.
(check_breakpoints, breakpoint_here, breakpoint_inserted_here):
Check both software and hardware breakpoints.
(validate_inserted_breakpoint): Assert the breakpoint is a
software breakpoint. Set the inserted flag to -1 instead of
setting shlib_disabled.
(delete_disabled_breakpoints): Adjust.
(validate_breakpoints): Only validate software breakpoints.
Adjust to inserted flag change.
(check_mem_read, check_mem_write): Skip breakpoint types other
than software breakpoints. Adjust to inserted flag change.
* mem-break.h (enum raw_bkpt_type): New enum.
(raw_breakpoint, struct process_info): Forward declare.
(Z_packet_to_target_hw_bp_type): Delete declaration.
(raw_bkpt_type_to_target_hw_bp_type, Z_packet_to_raw_bkpt_type)
(set_gdb_breakpoint, delete_gdb_breakpoint)
(clear_breakpoint_conditions): New declarations.
(set_gdb_breakpoint_at, clear_gdb_breakpoint_conditions): Delete.
(breakpoint_inserted_here): Update comment.
(add_breakpoint_condition, add_breakpoint_commands): Replace
address parameter with a breakpoint pointer parameter.
(gdb_breakpoint_here): Update comment.
(delete_gdb_breakpoint_at): Delete.
(insert_memory_breakpoint, remove_memory_breakpoint): Declare.
* server.c (process_point_options): Take a struct breakpoint
pointer instead of an address. Adjust.
(process_serial_event) <Z/z packets>: Use set_gdb_breakpoint and
delete_gdb_breakpoint.
* spu-low.c (spu_target_ops): Install NULL as
supports_z_point_type method.
* target.h: Include mem-break.h.
(struct target_ops) <prepare_to_access_memory>: Update comment.
<supports_z_point_type>: New field.
<insert_point, remove_point>: Take an enum raw_bkpt_type argument
instead of a char. Also take a raw breakpoint pointer.
* win32-arm-low.c (the_low_target): Install NULL as
supports_z_point_type.
* win32-i386-low.c (i386_supports_z_point_type): New function.
(i386_insert_point, i386_remove_point): Adjust to new interface.
(the_low_target): Install i386_supports_z_point_type.
* win32-low.c (win32_supports_z_point_type): New function.
(win32_insert_point, win32_remove_point): Adjust to new interface.
(win32_target_ops): Install win32_supports_z_point_type.
* win32-low.h (struct win32_target_ops):
<supports_z_point_type>: New method.
<insert_point, remove_point>: Take an enum raw_bkpt_type argument
instead of a char. Also take a raw breakpoint pointer.
gdb/testsuite/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/break-idempotent.c: New file.
* gdb.base/break-idempotent.exp: New file.
The Aarch64, MIPS and x86 Linux backends all have Z packet number
defines and corresponding protocol number to internal type convertion
routines. Factor them all out to gdbserver's core code, so we only
have one shared copy.
Tested on x86_64 Fedora 20, and also cross built for aarch64-linux-gnu
and mips-linux-gnu.
gdb/gdbserver/
2014-05-20 Pedro Alves <palves@redhat.com>
* mem-break.h: Include break-common.h.
(Z_PACKET_SW_BP, Z_PACKET_HW_BP, Z_PACKET_WRITE_WP)
(Z_PACKET_READ_WP, Z_PACKET_ACCESS_WP): New defines.
(Z_packet_to_target_hw_bp_type): New declaration.
* mem-break.c (Z_packet_to_target_hw_bp_type): New function.
* i386-low.c (Z_PACKET_HW_BP, Z_PACKET_WRITE_WP, Z_PACKET_READ_WP)
(Z_PACKET_ACCESS_WP): Delete macros.
(Z_packet_to_hw_type): Delete function.
* i386-low.h: Don't include break-common.h here.
(Z_packet_to_hw_type): Delete declaration.
* linux-x86-low.c (x86_insert_point, x86_insert_point): Call
Z_packet_to_target_hw_bp_type instead of Z_packet_to_hw_type.
* win32-i386-low.c (i386_insert_point, i386_remove_point): Call
Z_packet_to_target_hw_bp_type instead of Z_packet_to_hw_type.
* linux-aarch64-low.c: Don't include break-common.h here.
(Z_PACKET_SW_BP, Z_PACKET_HW_BP, Z_PACKET_WRITE_WP)
(Z_PACKET_READ_WP, Z_PACKET_ACCESS_WP): Delete macros.
(Z_packet_to_target_hw_bp_type): Delete function.
* linux-mips-low.c (rsp_bp_type_to_target_hw_bp_type): Delete
function.
(mips_insert_point, mips_remove_point): Use
Z_packet_to_target_hw_bp_type.
This makes linux-aarch64-low.c use target_hw_bp_type, like gdb's
aarch64-linux-nat.c. The original motivation is decoupling
insert_point/remove_point from Z packet numbers, but I think making
the files a little bit more similar is a good thing on its own right.
Ideally we'd merge these files even... The
aarch64_point_encode_ctrl_reg change is taken straight from GDB's
copy.
I confirmed with a cross compiler that this builds, but it's otherwise
untested.
gdb/gdbserver/
2014-05-20 Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c: Include break-common.h.
(enum target_point_type): Delete.
(Z_packet_to_point_type): Rename to ...
(Z_packet_to_target_hw_bp_type): ... this, and return a
target_hw_bp_type instead.
(aarch64_show_debug_reg_state): Take an enum target_hw_bp_type
instead of an enum target_point_type.
(aarch64_point_encode_ctrl_reg): Likewise. Compute type mask from
breakpoint type.
(aarch64_dr_state_insert_one_point)
(aarch64_dr_state_remove_one_point, aarch64_handle_breakpoint)
(aarch64_handle_aligned_watchpoint)
(aarch64_handle_unaligned_watchpoint, aarch64_handle_watchpoint):
Take an enum target_hw_bp_type instead of an enum
target_point_type.
(aarch64_supports_z_point_type): New function.
(aarch64_insert_point, aarch64_remove_point): Use it. Adjust to
use Z_packet_to_target_hw_bp_type.
On GDB release branches, we change $development in gdb/development.sh
to false, in order to build the GDB release without -Werror by default,
thus avoiding harmless compiler warnings from breaking the build of
someone who's only interested in building GDB rather than working
on it.
This patch implements the same strategy for gdbserver, using the exact
same method.
gdb/gdbserver/ChangeLog:
* configure.ac: Only use -Werror by default when DEVELOPMENT
is true.
* configure: Regenerate.
Tested on x86_64-linux, by rebuilding GDBserver first with development
set to true, and then doing it again with development set to false.
Werror was used in the first case, but not in the second.
gdbserver makes libthread_db to access uninitialized memory. Surprisingly it
does not harm normally, even -fsanitize=address works with current gdbserver.
I have found just valgrind detects it as a very first warning for gdbserver:
Syscall param ptrace(addr) contains uninitialised byte(s)
at 0x3721EECEBE: ptrace (ptrace.c:45)
by 0x436EE5: ps_get_thread_area (linux-x86-low.c:252)
by 0x5559D02: __td_ta_lookup_th_unique (td_ta_map_lwp2thr.c:157)
by 0x5559EC3: td_ta_map_lwp2thr (td_ta_map_lwp2thr.c:207)
by 0x43F87D: find_one_thread (thread-db.c:281)
by 0x440038: thread_db_get_tls_address (thread-db.c:505)
by 0x40F6D0: handle_query (server.c:2004)
by 0x4124CF: process_serial_event (server.c:3445)
by 0x4136B6: handle_serial_event (server.c:3889)
by 0x419571: handle_file_event (event-loop.c:434)
by 0x418D38: process_event (event-loop.c:189)
by 0x419AB7: start_event_loop (event-loop.c:552)
Reproducible with:
cd gdb/testsuite
g++ -o gdb.threads/tls gdb.threads/tls{,2}.c -m32 -pthread
../gdbserver/gdbserver :1234 gdb.threads/tls
../gdb -batch gdb.threads/tls -ex 'target remote :1234' -ex 'b spin' -ex c -ex 'p a_thread_local'
It is more easily reproducible even without valgrind using s/0x00/0xff/ in the
attached patch. It will then turn the output of reproducer above:
$1 = 0
->
Cannot find thread-local storage for Thread 29044, executable file .../gdb/testsuite/gdb.threads/tls:
Remote target failed to process qGetTLSAddr request
gdb/gdbserver/
2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix gdbserver qGetTLSAddr for x86_64 -m32.
* linux-x86-low.c (X86_64_USER_REGS): New.
(x86_fill_gregset): Call memset for BUF first in x86_64 -m32 case.
Message-ID: <20140410114901.GA16411@host2.jankratochvil.net>
The makefile rule i386-avx512.c is to generate i386-avx512.c, but it
is written to i386-avx.c by mistake. This patch is to fix this typo.
gdb/gdbserver:
2014-04-28 Yao Qi <yao@codesourcery.com>
* Makefile.in (i386-avx512.c): Fix the typo of generated file
name.
2014-04-25 Pedro Alves <palves@redhat.com>
PR server/16255
* linux-low.c (linux_attach_fail_reason_string): New function.
(linux_attach_lwp): Delete.
(linux_attach_lwp_1): Rename to ...
(linux_attach_lwp): ... this. Take a ptid instead of a pid as
argument. Remove "initial" parameter. Return int instead of
void. Don't error or warn here.
(linux_attach): Adjust to call linux_attach_lwp. Call error on
failure to attach to the tgid. Call warning when failing to
attach to an lwp.
* linux-low.h (linux_attach_lwp): Take a ptid instead of a pid as
argument. Remove "initial" parameter. Return int instead of
void. Don't error or warn here.
(linux_attach_fail_reason_string): New declaration.
* thread-db.c (attach_thread): Adjust to linux_attach_lwp's
interface change. Use linux_attach_fail_reason_string.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
My main motivation here is moving in the direction of decoupling
insert_point/remove_point from packet numbers, though this bit alone
should make it a little bit easier to merge gdb/gdbserver/i386-low.c
and gdb/i386-nat.c (which are largely the same).
Tested on x86_64 Fedora 17, and cross built for i686-mingw32 too.
gdb/gdbserver/
2014-04-23 Pedro Alves <palves@redhat.com>
* i386-low.c: Don't include break-common.h here.
(i386_low_insert_watchpoint, i386_low_remove_watchpoint): Change
prototype to take target_hw_bp_type as argument instead of a Z
packet char.
* i386-low.h: Include break-common.h here.
(Z_packet_to_hw_type): Declare.
(i386_low_insert_watchpoint, i386_low_remove_watchpoint): Change
prototypes.
* linux-x86-low.c (x86_insert_point): Convert the packet number to
a target_hw_bp_type before calling i386_low_insert_watchpoint.
(x86_remove_point): Convert the packet number to a
target_hw_bp_type before calling i386_low_remove_watchpoint.
* win32-i386-low.c (i386_insert_point): Convert the packet number
to a target_hw_bp_type before calling i386_low_insert_watchpoint.
(i386_remove_point): Convert the packet number to a
target_hw_bp_type before calling i386_low_remove_watchpoint.
While trying to fix hbreak2.exp against GDBserver I noticed this...
(gdb) hbreak main if 1
Sending packet: $m400580,40#2e...Packet received: e8d2ffffff5dc3554889e54883ec10c745fc00000000eb0eb800000000e8c1ffffff8345fc01817dfce70300007ee9b800000000c9c3662e0f1f840000000000
Sending packet: $m40058f,1#31...Packet received: c7
Hardware assisted breakpoint 1 at 0x40058f: file ../../../src/gdb/testsuite/gdb.base/break-idempotent.c, line 46.
Sending packet: $Z1,40058f,1;X3,220127#9b...
*hangs forever*
The issue is that nothing advances the packet pointer if
add_breakpoint_condition either fails to parse the agent expression,
or fails to find the breakpoint, resulting in an infinite loop in
process_point_options. The latter case should really be fixed by
GDBserver tracking GDB Z1 breakpoints in its breakpoint structures
like Z0 breakpoints are, but the latter case still needs handling.
add_breakpoint_commands has the same issue, though at present I don't
know any way to trigger it other than sending a manually cooked
packet.
Unbelievably, it doesn't look like we have any test that tries setting
a conditional hardware breakpoint. Looking at cond-eval-mode.exp, it
looks like the file was meant to actually test something, but it's
mostly empty today. This patch adds tests that tries all sorts of
conditional breakpoints and watchpoints. The test hangs/fails without
the GDBserver fix.
Tested on x86_64 Fedora 17.
gdb/gdbserver/
2014-04-10 Pedro Alves <palves@redhat.com>
* mem-break.c (add_breakpoint_condition, add_breakpoint_commands):
Check if the condition or command is NULL before checking if the
breakpoint is known. On success, return true.
* mem-break.h (add_breakpoint_condition): Document return.
(add_breakpoint_commands): Add describing comment.
* server.c (skip_to_semicolon): New function.
(process_point_options): Use it.
gdb/testsuite/
2014-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/cond-eval-mode.c: New file.
* gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
prepare_for_testing to build the new file. Check result of
runto_main.
(test_break, test_watch): New procedures.
(top level): Use them.
sh-linux-gnu-gcc (...) src/gdb/gdbserver/linux-low.c
.../src/gdb/gdbserver/linux-low.c: In function 'linux_read_loadmap':
.../src/gdb/gdbserver/linux-low.c:5284:13: error: 'struct lwp_info' has no member named 'entry'
make[1]: *** [linux-low.o] Error 1
gdb/gdbserver/
2014-04-09 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_read_loadmap): Pass current_inferior directly
to lwpid_of.
GDBserver currently hangs forever in waitpid if the leader thread
exits before other threads, or if all resumed threads exit - e.g.,
next over a thread exit with sched-locking on. This is exposed by
leader-exit.exp. leader-exit.exp is part of a series of tests for a
set of related problems. See
<http://www.sourceware.org/ml/gdb-patches/2011-10/msg00704.html>:
"
To recap, on the Linux kernel, ptrace/waitpid don't allow reaping the
leader thread until all other threads in the group are reaped. When
the leader exits, it goes zombie, but waitpid will not return an exit
status until the other threads are gone. This is presently exercised
by the gdb.threads/leader-exit.exp test. The fix for that test, in
linux-nat.c:wait_lwp, handles the case where we see the leader gone
when we're stopping all threads to report an event to some other
thread to the core.
(...)
The latter bit about not blocking if there no resumed threads in the
process also applies to some other thread exiting, not just the main
thread. E.g., this test starts a thread, and runs to a breakpoint in
that thread:
...
(gdb) c
Continuing.
[New Thread 0x7ffff75a4700 (LWP 23397)]
[Switching to Thread 0x7ffff75a4700 (LWP 23397)]
Breakpoint 2, thread_a (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/no-unwaited-for-left.c:28
28 return 0; /* break-here */
(gdb) info threads
* 2 Thread 0x7ffff75a4700 (LWP 23397) thread_a (arg=0x0) at ../../../src/gdb/testsuite/gdb.threads/no-unwaited-for-left.c:28
1 Thread 0x7ffff7fcb720 (LWP 23391) 0x00007ffff7bc606d in pthread_join (threadid=140737343276800, thread_return=0x0) at pthread_join.c:89
The thread will exit as soon as we resume it. But if we only resume
that thread, leaving the rest of the threads stopped:
(gdb) set scheduler-locking on
(gdb) c
Continuing.
^C^C^C^C^C^C^C^C
"
This patch fixes the issues by implementing TARGET_WAITKIND_NO_RESUMED
on GDBserver, similarly to what the patch above did for native
Linux GDB.
gdb.threads/leader-exit.exp now passes.
gdb.threads/no-unwaited-for-left.exp now at least errors out instead
of hanging:
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 15454] #1 stopped.
0x00000034cf408e60 in pthread_join (threadid=140737353922368, thread_return=0x0) at pthread_join.c:93
93 lll_wait_tid (pd->tid);
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
The gdb.threads/non-ldr-exc-*.exp tests are skipped because GDBserver
unfortunately doesn't support fork/exec yet, but I'm confident this
fixes the related issues.
I'm leaving modeling TARGET_WAITKIND_NO_RESUMED in the RSP for a
separate pass.
(BTW, in case of error in response to a vCont, it would be better for
GDB to query the target for the current thread, or re-select one,
instead of assuming current inferior_ptid is still the selected
thread.)
This implementation is a little different from GDB's, because I'm
avoiding bringing in more of this broken use of waitpid(PID) into
GDBserver. Specifically, this avoids waitpid(PID) when stopping all
threads. There's really no need for wait_for_sigstop to wait for each
LWP in turn. Instead, with some refactoring, we make it reuse
linux_wait_for_event.
gdb/gdbserver/
2014-02-27 Pedro Alves <palves@redhat.com>
PR 12702
* inferiors.h (A_I_NEXT, ALL_INFERIORS_TYPE, ALL_PROCESSES): New
macros.
* linux-low.c (delete_lwp, handle_extended_wait): Add debug
output.
(last_thread_of_process_p): Take a PID argument instead of a
thread pointer.
(linux_wait_for_lwp): Delete.
(num_lwps, check_zombie_leaders, not_stopped_callback): New
functions.
(linux_low_filter_event): New function, party factored out from
linux_wait_for_event.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_filtered): ... this. Add new filter ptid
argument. Partly rewrite. Always use waitpid(-1, WNOHANG) and
sigsuspend. Check for zombie leaders.
(linux_wait_for_event): Reimplement as wrapper around
linux_wait_for_event_filtered.
(linux_wait_1): Handle TARGET_WAITKIND_NO_RESUMED. Assume that if
a normal or signal exit is seen, it's the whole process exiting.
(wait_for_sigstop): No longer a for_each_inferior callback.
Rewrite on top of linux_wait_for_event_filtered.
(stop_all_lwps): Call wait_for_sigstop directly.
* server.c (resume, handle_target_event): Handle
TARGET_WAITKIND_NO_RESUMED.
This is the GDBserver counterpart of a change we recently made in
GDB to only rely on get_image_name to determine its name.
This simplification, in turn, allows us to remove a fair amount of
functions and globals which now become unused.
gdb/gdbserver/ChangeLog:
* win32-low.c (psapi_get_dll_name,
* win32_CreateToolhelp32Snapshot): Delete.
(win32_CreateToolhelp32Snapshot, win32_Module32First)
(win32_Module32Next, load_toolhelp, toolhelp_get_dll_name):
Delete.
(handle_load_dll): Add function description.
Remove code using psapi_get_dll_name and toolhelp_get_dll_name.
