I think "set debugvarobj" has the wrong name.
It ought to be "set debug varobj", like gdb's other debug settings.
This patch makes the change.
I chose not to install deprecated aliases, since this is only a debug
setting; but if someone feels strongly about it I will add them.
Built and regtested on x86-64 Fedora 20.
2014-04-29 Tom Tromey <tromey@redhat.com>
* varobj.c (_initialize_varobj): Rename to "set debug varobj" and
"show debug varobj".
2014-04-29 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Debugging Output): Rename to "set debug varobj" and
"show debug varobj".
When connecting to a remote system, we use the compare-sections
command to verify that the box is running the code that we think it is
running. Since the system is up and running and *NOT* 'freshly
downloaded without yet executing anything', read-write sections, of
course, differ from what they were in the executable file.
Comparing read-write sections takes time and more importantly the
MIS-MATCHED output is confusing to some users.
The compare-sections command compares all loadable sections including
read-write sections. This patch gives the user the option to compare
just the loadable read-only sections.
gdb/
2014-05-01 David Taylor <dtaylor@emc.com>
* remote.c (compare_sections_command): Add -r option to compare
all loadable read-only sections.
gdb/doc/
2014-05-01 David Taylor <dtaylor@emc.com>
* gdb.texinfo (compare-sections): Document the new -r (read-only)
option.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
* NEWS: Mention it.
* solib.c (solib_read_symbols): Only print symbol loading messages
if requested.
(solib_add): If symbol loading is in "brief" mode, notify user
symbols are being loaded.
(reload_shared_libraries_1): Ditto.
* symfile.c (print_symbol_loading_off): New static global.
(print_symbol_loading_brief): New static global.
(print_symbol_loading_full): New static global.
(print_symbol_loading_enums): New static global.
(print_symbol_loading): New static global.
(print_symbol_loading_p): New function.
(symbol_file_add_with_addrs): Only print symbol loading messages
if requested.
(_initialize_symfile): Register "print symbol-loading" set/show
command.
* symfile.h (print_symbol_loading_p): Declare.
doc/
* gdb.texinfo (Symbols): Document set/show print symbol-loading.
testsuite/
* gdb.base/print-symbol-loading-lib.c: New file.
* gdb.base/print-symbol-loading-main.c: New file.
* gdb.base/print-symbol-loading.exp: New file.
The "dll-symbols" command, specific to native Windows platforms,
gives the impression that the symbols were not loaded, first
because it completes silently, and second because the "info shared"
output does not get updated after the command completes:
(gdb) dll-symbols C:\WINDOWS\syswow64\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 No C:\WINDOWS\system32\rpcrt4.dll
(we exected the "Syms Read" column to read "Yes").
As far as I can tell, the symbols actually do get loaded, but completely
independently from the solib framework, which explains the silent
loading and the fact that the "Syms Read" column does not get updated.
See windows-nat.c::safe_symbol_file_add_stub, which calls symbol_file_add
instead of calling solib_add.
But, aside from the fact that the "Syms Read" status does not get
updated, I also noticed that it does not take into account the DLL's
actual load address when loading its symbols. As a result, I believe
that we get it wrong if the DLL does not get loaded at the prefered
address.
Rather than trying to fix this command, there does not seem to be
a reason other than historical for having Windows-specific commands
which essentially re-implements the "sharedlibrary" command. The
command interface is slightly different (the latter takes a regexp
rather than a plain filename), but it should be just as easy to use
the "sharedlibrary" command, or its "share" alias, as usisng the
"dll-symbols" command. For instance:
(gdb) share rpcrt4.dll
Reading symbols from C:\WINDOWS\system32\rpcrt4.dll...(no debugging symbols found)...done.
Loaded symbols for C:\WINDOWS\system32\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 Yes (*) C:\WINDOWS\system32\rpcrt4.dll
This patch therefore deprecates the "dll-symbols" command, as well
as its two aliases "add-shared-symbol-files" and "assf", with a view
of deleting them as soon as the 7.8 branch gets cut.
gdb/ChangeLog:
* windows-nat.c (_initialize_windows_nat): Deprecate the
"dll-symbols" command. Turn the "add-shared-symbol-files"
and "assf" aliases into commands, and deprecate them as well.
* NEWS: Add entry explaining that "dll-symbols" and its two
aliases are now deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Document "add-shared-symbol-files"
and "assf" as being deprecated.
(Cygwin Native): Likewise for "dll-symbols".
(Non-debug DLL Symbols): Remove reference to "dll-symbols"
as a way to force the loading of symbols from a DLL.
Currently, Ada debugging requires the use of certain GNAT-specific
encodings, which are generated by the compiler. These encodings
were created a long time ago to work around the fairly limited
capabilities of the stabs debugging format. With DWARF, the vast
majority of the encodings could be abandoned in favor of a pure
DWARF approach.
In order to make it easier to evaluate the quality of the DWARF
debugging information generated by the compiler, and how the debugger
handles it, we are introducing a small Ada-specific maintenance
setting which changes the debugger's behavior to ignore descriptive
types. Descriptive types are artificial types generated by the
compiler purely to give the debugger hints as to how to properly
decode certain properties of a type. For instance, for array
types, it generates a parallel type whose name is the name of
the array suffixed with ___XA, whose contents tells us what
the array's index type is, and possibly its bounds. See GCC's
gcc/ada/exp_dbug.ads for the full description of all encodings.
This is only a first step, as this setting does not deactivate
all encodings; More settings dedicated to each type of encoding
will likely be implemented in the future, as we make progress.
gdb/ChangeLog:
* ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
New static globals.
(maint_set_ada_cmd, maint_show_ada_cmd): New functions.
(ada_ignore_descriptive_types_p): New static global.
(find_parallel_type_by_descriptive_type): Return immediately
if ada_ignore_descriptive_types_p is set.
(_initialize_ada_language): Register new commands "maintenance
set ada", "maintenance show ada", "maintenance set ada
ignore-descriptive-types" and "maintenance show ada
ignore-descriptive-types".
* NEWS: Add entry for new "maint ada set/show
ignore-descriptive-types" commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Glitches): Document the new "maint ada set/show
ignore-descriptive-types". commands.
Provide to_resume and to_wait target methods for the btrace record target
to allow reverse stepping and replay support.
Replay is limited in the sense that only stepping and source correlation
are supported. We do not record data and thus can not show variables.
Non-stop mode is not working. Do not allow record-btrace in non-stop mode.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_thread_flag): New.
(struct btrace_thread_info) <flags>: New.
* record-btrace.c (record_btrace_resume_thread)
(record_btrace_find_thread_to_move, btrace_step_no_history)
(btrace_step_stopped, record_btrace_start_replaying)
(record_btrace_step_thread, record_btrace_decr_pc_after_break)
(record_btrace_find_resume_thread): New.
(record_btrace_resume, record_btrace_wait): Extend.
(record_btrace_can_execute_reverse): New.
(record_btrace_open): Fail in non-stop mode.
(record_btrace_set_replay): Split into this, ...
(record_btrace_stop_replaying): ... this, ...
(record_btrace_clear_histories): ... and this.
(init_record_btrace_ops): Init to_can_execute_reverse.
* NEWS: Announce it.
testsuite/
* gdb.btrace/delta.exp: Check reverse stepi.
* gdb.btrace/tailcall.exp: Update. Add stepping tests.
* gdb.btrace/finish.exp: New.
* gdb.btrace/next.exp: New.
* gdb.btrace/nexti.exp: New.
* gdb.btrace/record_goto.c: Add comments.
* gdb.btrace/step.exp: New.
* gdb.btrace/stepi.exp: New.
* gdb.btrace/multi-thread-step.c: New.
* gdb.btrace/multi-thread-step.exp: New.
* gdb.btrace/rn-dl-bind.c: New.
* gdb.btrace/rn-dl-bind.exp: New.
* gdb.btrace/data.c: New.
* gdb.btrace/data.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo: Document limited reverse/replay support
for target record-btrace.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
The "record function-call-history" and "record instruction-history" commands
accept a range "begin, end". End is not included in both cases. Include it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_insn_history_range): Include
end.
(record_btrace_insn_history_from): Adjust range.
(record_btrace_call_history_range): Include
end.
(record_btrace_call_history_from): Adjust range.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Update tests.
* gdb.btrace/instruction_history.exp: Update tests.
doc/
* gdb.texinfo (Process Record and Replay): Update documentation.
Add a new modifier /c to the "record function-call-history" command to
indent the function name based on its depth in the call stack.
Also reorder the optional fields to have the indentation at the very beginning.
Prefix the insn range (/i modifier) with "inst ".
Prefix the source line (/l modifier) with "at ".
Change the range syntax from "begin-end" to "begin,end" to allow copy&paste to
the "record instruction-history" and "list" commands.
Adjust the respective tests and add new tests for the /c modifier.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (enum record_print_flag)
<record_print_indent_calls>: New.
* record.c (get_call_history_modifiers): Recognize /c modifier.
(_initialize_record): Document /c modifier.
* record-btrace.c (btrace_call_history): Add btinfo parameter.
Reorder fields. Optionally indent the function name. Update
all users.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected field
order for "record function-call-history".
Add new tests for "record function-call-history /c".
* gdb.btrace/exception.cc: New.
* gdb.btrace/exception.exp: New.
* gdb.btrace/tailcall.exp: New.
* gdb.btrace/x86-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: New.
* gdb.btrace/unknown_functions.c: New.
* gdb.btrace/unknown_functions.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo (Process Record and Replay): Document new /c
modifier accepted by "record function-call-history".
Add /i modifier to "record function-call-history" example.
This patch fixes the grammar, and tries to do it in a way that makes
the logic behind the current implementation a little clearer.
gdb/doc/ChangeLog:
(from Yuanhui Zhang <asmwarrior@gmail.com>)
(from Joel Brobecker <brobecker@adacore.com>)
* gdb.texinfo (GDB/MI Output Syntax): Add some missing "nl"
markers. Remove one that was misplaced.
gdb/doc/
2014-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Your Program's Environment) <set environment>:
Mention the shell, and point at 'set exec-wrapper'.
Consider the following declarations:
typedef long our_time_t;
our_time_t current_time = 1384395743;
The purpose of this patch is to allow the use of a pretty-printer
for variables of type our_time_t. Normally, pretty-printing sniffers
use the tag name in order to determine which, if any, pretty-printer
should be used. But in the case above, the tag name is not set, since
it does not apply to integral types.
This patch extends the gdb.Type list of attributes to also include
the name of the type, thus allowing the sniffer to match against
that name. With that change, I was able to write a pretty-printer
which displays our variable as follow:
(gdb) print current_time
$1 = Thu Nov 14 02:22:23 2013 (1384395743)
gdb/ChangeLog:
* python/py-type.c (typy_get_name): New function.
(type_object_getset): Add entry for attribute "name".
* NEWS: Add entry mentioning this new attribute.
gdb/doc/ChangeLog:
* gdb.texinfo (Types In Python): Document new attribute Types.name.
gdb/testsuite:
* gdb.python/py-pp-integral.c: New file.
* gdb.python/py-pp-integral.py: New file.
* gdb.python/py-pp-integral.exp: New file.
Tested on x86_64-linux.
The following patch ...
| commit 14e75d8ea4
| Date: Wed Apr 18 06:46:47 2012 +0000
|
| gdb/
| PR symtab/7259:
| [...]
... discussed under ...
[PATCH] Allow 64-bit enum values
http://www.sourceware.org/ml/gdb-patches/2012-03/msg00772.html
... introduced a change in the gdb.Fields API without documenting it:
| I took a separate approach from the one I took in:
|
| http://sourceware.org/ml/gdb-patches/2012-02/msg00403.html
|
| and removed the overloaded meaning of the bitpos location variable to
| fix PR symtab/7259. In the following patch, I introduce a separate
| field_location union member 'enumval' which can accept LONGEST and
| hence expand enum values to 64-bit signed values. With this change,
| bitpos now only is used for (non-negative) offsets into structures,
| since the other overload of bitpos (range bounds) were already
| separated into struct range_bound.
This patch updates the documentation to reflect that change.
gdb/doc/ChangeLog:
* gdb.texinfo (Types In Python): Fix the documentation of
attribute "bitpos" in class gdb.Field for enum types. Add
documentation for attribute "enumval" in that same class.
This is to make it easier to discover the various options displayed
by the -list-features command.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Support Commands): Change @table into
@ftable.
* gdb.texinfo (Auto-loading): Move menu up. Move discussion of
auto-loaded objfile scripts and .debug_gdb_scripts section to their
corresponding section in Extending GDB.
(Extending GDB): Move menu up. New menu item "Auto-loading
extensions".
(Sequences): New menu item "Auto-loading sequences".
(Auto-loading sequences): New node.
(Python): Rename section from Scripting GDB to Extending GDB.
(Python Auto-loading): Update xref, refer to "Auto-loading extensions".
Move docs on ways to auto-load extensions to ...
(Auto-loading extensions): ... here. New node.
A number of commands provide the capability to query the debugger
about support for various features, and one of them in particular
(-list-features), is expected to grow as new features get added.
-list-target-features should also grow a bit over time, but probably
slower.
These commands deserve their own section and @node.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI): Add "GDB/MI Support Commands" entry
in menu.
(GDB/MI Variable Objects): Adjust reference to "-list-features"
command, now in a new node.
(GDB/MI Support Commands): New node, with its contents being
extracted from the "GDB/MI Miscellaneous Commands" node.
A small paragraph introducing the section is also added at
the start.
(GDB/MI Miscellaneous Commands): Delete the description of the
-info-gdb-mi-command, -list-features and -list-target-features
commands, now hosted in the "GDB/MI Support Commands" node.
PR python/16113
* NEWS (Python Scripting): Add entry for the new feature and the
new attribute of gdb.Field objects.
* python/py-type.c (gdbpy_is_field): New function
(convert_field): Add 'parent_type' attribute to gdb.Field
objects.
* python/py-value.c (valpy_getitem): Allow subscript value to be
a gdb.Field object.
(value_has_field): New function
(get_field_flag): New function
* python/python-internal.h (gdbpy_is_field): Add declaration.
testsuite/
* gdb.python/py-value-cc.cc: Improve test case.
* gdb.python/py-value-cc.exp: Add new tests to test usage of
gdb.Field objects as subscripts on gdb.Value objects.
doc/
* gdb.texinfo (Values From Inferior): Add a note about using
gdb.Field objects as subscripts on gdb.Value objects.
(Types In Python): Add description about the new attribute
"parent_type" of gdb.Field objects.
This adds "exec-run-start-option" in the output of the -list-features
commands, allowing front-ends to easily determine whether -exec-run
supports the --start option.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_list_features): add "exec-run-start-option".
* NEWS: Expand the entry documenting the new -exec-run --start
option to mention the corresponding new entry in the output of
"-list-features".
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document the new
"exec-run-start-option" entry in the output of the "-list-features"
command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-start.exp: Add test verifying that -list-features
contains "exec-run-start-option".
I wanted to find the docs for "catch load" the other day, and I found
out that this isn't in the index. It seems to me that each command
ought to be in the index for quick reference like this, so this patch
adds an @kindex (chosen because it seems to be what the rest of the
manual does) for each "catch" subcommand.
2013-12-03 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Set Catchpoints): Add @kindex for each command
documented here.
I happened to notice that the gdbserver program doesn't appear in the
top-level "dir" file. This adds an entry for it to the gdb manual.
2013-12-03 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (@direntry): Add menu item for gdbserver.
Now that the -info-gdb-mi-command is available, there is no need for
this entry. The entry and associated new commands were added recently
enough that no front-end out there should be depending on it yet.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_list_features): Remove "ada-exceptions".
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Remove the
documentation of the "ada-exceptions" entry.
... when trying to execute an undefined GDB/MI command. When trying
to execute a GDB/MI command which does not exist, the current error
result record looks like this:
-unsupported
^error,msg="Undefined MI command: unsupported"
The only indication that the command does not exist is the error
message. It would be a little fragile for a consumer to rely solely
on the contents of the error message in order to determine whether
a command exists or not.
This patch improves the situation by adding concept of error
code, starting with one well-defined error code ("undefined-command")
identifying errors due to a non-existant command. Here is the new
output:
-unsupported
^error,msg="Undefined MI command: unsupported",code="undefined-command"
This error code is only displayed when the corresponding error
condition is met. Otherwise, the error record remains unchanged.
For instance:
-symbol-list-lines foo.adb
^error,msg="-symbol-list-lines: Unknown source file name."
For frontends to be able to know whether they can rely on this
variable, a new entry "undefined-command-error-code" has been
added to the "-list-features" command. Another option would be
to always generate an error="..." variable (for the default case,
we could decide for instance that the error code is the empty string).
But it seems more efficient to provide that info in "-list-features"
and then only add the error code when meaningful.
gdb/ChangeLog:
(from Pedro Alves <palves@redhat.com>)
(from Joel Brobecker <brobecker@adacore.com>)
* exceptions.h (enum_errors) <UNDEFINED_COMMAND_ERROR>: New enum.
* mi/mi-parse.c (mi_parse): Throw UNDEFINED_COMMAND_ERROR instead
of a regular error when the GDB/MI command does not exist.
* mi/mi-main.c (mi_cmd_list_features): Add
"undefined-command-error-code".
(mi_print_exception): Print an "undefined-command"
error code if EXCEPTION.ERROR is UNDEFINED_COMMAND_ERROR.
* NEWS: Add entry documenting the new "code" variable in
"^error" result records.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Result Records): Fix the syntax of the
"^error" result record concerning the error message. Document
the error code that may also be part of that result record.
(GDB/MI Miscellaneous Commands): Document the
"undefined-command-error-code" element in the output of
the "-list-features" GDB/MI command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-undefined-cmd.exp: New testcase.
This patch adds a new GDB/MI command meant for graphical frontends
trying to determine whether a given GDB/MI command exists or not.
Examples:
-info-gdb-mi-command unsupported-command
^done,command={exists="false"}
(gdb)
-info-gdb-mi-command symbol-list-lines
^done,command={exists="true"}
(gdb)
At the moment, this is the only piece of information that this
command returns.
Eventually, and if needed, we can extend it to provide
command-specific pieces of information, such as updates to
the command's syntax since inception. This could become,
for instance:
-info-gdb-mi-command symbol-list-lines
^done,command={exists="true",features=[]}
(gdb)
-info-gdb-mi-command catch-assert
^done,command={exists="true",features=["conditions"]}
In the first case, it would mean that no extra features,
while in the second, it announces that the -catch-assert
command in this version of the debugger supports a feature
called "condition" - exact semantics to be documented with
combined with the rest of the queried command's documentation.
But for now, we start small, and only worry about existance.
And to bootstrap the process, I have added an entry in the
output of the -list-features command as well ("info-gdb-mi-command"),
allowing the graphical frontends to go through the following process:
1. Send -list-features, collect info from there as before;
2. Check if the output contains "info-gdb-mi-command".
If it does, then support for various commands can be
queried though -info-gdb-mi-command. Newer commands
will be expected to always be checked via this new
-info-gdb-mi-command.
gdb/ChangeLog:
* mi/mi-cmds.h (mi_cmd_info_gdb_mi_command): Declare.
* mi/mi-cmd-info.c (mi_cmd_info_gdb_mi_command): New function.
* mi/mi-cmds.c (mi_cmds): Add -info-gdb-mi-command command.
* mi/mi-main.c (mi_cmd_list_features): Add "info-gdb-mi-command"
field to output of "-list-features".
* NEWS: Add entry for new -info-gdb-mi-command.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document
the new -info-gdb-mi-command GDB/MI command. Document
the meaning of "-info-gdb-mi-command" in the output of
-list-features.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-i-cmd.exp: New file.
Unfortunately, UNWIND_NULL_ID is exported to Python as
gdb.FRAME_UNWIND_NULL_ID so we can't really eliminate it.
(I'd assume scripts just check the result of Frame.unwind_stop_reason,
and compare it to gdb.FRAME_UNWIND_NO_REASON. That at most, they'll
pass the result of Frame.unwind_stop_reason to
gdb.frame_stop_reason_string. I'd prefer to just get rid of it, but
because we make an API promise, we get to keep this around for
compatibility, in case a script does refer to gdb.FRAME_UNWIND_NULL_ID
directly.)
gdb/
2013-11-29 Pedro Alves <palves@redhat.com>
* unwind_stop_reasons.def (UNWIND_NULL_ID): Update comment.
gdb/doc/
2013-11-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Frames In Python) <gdb.FRAME_UNWIND_NULL_ID>:
Update comment.
Similar to stack cache, in this patch, we add
TARGET_OBJECT_CODE_MEMORY to read code from target and add a new
option "set code-cache on|off" to optimize code accesses by
using the target memory cache.
In V4:
- Remove "without affecting correctness" from NEWS and doc.
- Replace "ON" with "on" in doc.
- "access" -> "accesses".
In V3:
- Rename functions and variables.
- Update command help, doc and NEWS entry.
- Invalidate cache on option transitions, to align with
the behaviour of "stack-cache". Since cache invalidation is
transparent to users, users don't know option "stack-cache"
transitions cause code cache invalidation.
V2 was reviewed by Doug. There are some changes in V3, so I post it
here.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* NEWS: Add note on new "set code-cache" option.
* target-dcache.c (code_cache_enabled_1): New variable.
(code_cache_enabled): New variable.
(show_code_cache, set_code_cache): New function.
(code_cache_enabled_p): New function.
(_initialize_target_dcache): Register command.
* target-dcache.h (code_cache_enabled_p): Declare.
* target.c (memory_xfer_partial_1):Handle
TARGET_OBJECT_CODE_MEMORY and code_cache_enabled.
(target_read_code): New function.
* target.h (enum target_object) <TARGET_OBJECT_CODE_MEMORY>:
New.
(target_read_code): Declare.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Remote Data): Document new
"set/show stack-cache" option.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Target Data): Replace "ON" with "on".
(Maintenance Commands): Replace "ON" and "OFF" with "on" and
"off" respectively.
Hi,
When using command -var-list-children, "displayhint" appears in the result of
each child, shown as the following output.
-var-list-children ss1 ^M
^done,numchild="2",displayhint="pp_ss",children=[child={name="ss1.a",exp="a",numchild="0",type="struct s",thread-id="1",displayhint="pp_s",dynamic="1"},child={name="ss1.b",exp="b",numchild="0",type="struct s",thread-id="1",displayhint="pp_s",dynamic="1"}],has_more="0"
Current doc on command -var-list-children doesn't reflect this. This
patch is to fix it.
gdb/doc:
2013-11-23 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Add the description
of "displayhint" to the table about child results.
Hi,
I find "dynamic=1" appear in the result of each child of the output of
-var-list-children,
-var-list-children ss1
^done,numchild="2",children=[child={name="ss1.a",exp="a",numchild="0",type="struct s",thread-id="1",dynamic="1"},child={name="ss1.b",exp="b",numchild="0",type="struct s",thread-id="1",dynamic="1"}],has_more="0"
but the doc doesn't mention this. This patch is to copy the description
of "dynamic=1" here.
gdb/doc:
2013-11-21 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Add attribute 'dynamic'
for the output of command -var-list-children.
Looks "see" is unnecessary before @pxref.
gdb/doc:
2013-11-21 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Target Data): Remove "see" before
@pxref.
Hi,
Nowadays, 'target_dcache' is a global variable in GDB, which is not
necessary. It can be a per-address-space variable. In this patch, we
associate target_dcache to address_space.
gdb/doc:
2013-11-20 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Target Data): Update doc for
per-address-space dcache.
gdb:
2013-11-20 Yao Qi <yao@codesourcery.com>
* progspace.h (struct address_space_data): Declare.
* target-dcache.c: Include "progspace.h".
(target_dache): Remove.
(target_dcache_aspace_key): New.
(target_dcache_cleanup): New function.
(target_dcache_init_p): Get data through
target_dcache_aspace_key.
(target_dcache_invalidate): Likewise.
(target_dcache_get): Likewise.
(target_dcache_get_or_init): Likewise.
(_initialize_target_dcache): Initialize
target_dcache_aspace_key.
When I try to describe the cache and its related commands (in a
cache-per-address-space world), I find hard to add, because
existing doc is focused on remote debugging, while data cache is used
regardless of the target. More precisely, GDB cache target data,
instead of remote data.
gdb/doc:
2013-11-20 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Data): Rename menu item.
(Caching Remote Data): Rename to ...
(Caching Target Data): ... it. Update.
Following the addition of the --language optiton to all GDB/MI
commands, I realized that there was no easy way for front-ends
to figure out whether this features is available or not. So I added
a "language-option" entry to -list-features.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_list_features): Add "language-options"
to -list-features output.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document the new
"language-option" entry in the output of the "-list-features"
command.
This patch fixes PR c++/16117.
gdb has an extension so that users can use expressions like FILE::NAME
to choose a variable of the given name from the given file. The bug
is that this extension takes precedence over ordinary C++ expressions
of the same form. You might think this is merely hypothetical, but
now that C++ headers commonly do not use an extension, it is more
common.
This patch fixes the bug by making two related changes. First, it
changes gdb to prefer the ordinary C++ meaning of a symbol over the
extended meaning. Second, it arranges for single-quoting of the
symbol to indicate a preference for the extension.
Built and regtested on x86-64 Fedora 18.
New test case included.
2013-11-15 Tom Tromey <tromey@redhat.com>
PR c++/16117:
* c-exp.y (lex_one_token): Add "is_quoted_name" argument.
(classify_name): Likewise. Prefer a field of "this" over a
filename.
(classify_inner_name, yylex): Update.
2013-11-15 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Variables): Note gdb rules for ambiguous cases.
Add example.
2013-11-15 Tom Tromey <tromey@redhat.com>
* gdb.cp/includefile: New file.
* gdb.cp/filename.exp: New file.
* gdb.cp/filename.cc: New file.
This patch fixes a buglet in the manual.
It's wrong to say that a method is defined "as" a subclass.
Instead it should say that a method is defined "in" a subclass.
I'm checking this in under the obvious rule.
2013-11-14 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Breakpoints In Python): Replace "as" with "in".
Frontend sometimes need to evaluate expressions that are
language-specific. For instance, Eclipse uses the following
expression to determine the size of an address on the target:
-data-evaluate-expression "sizeof (void*)"
Unfortunately, if the main of the program being debugged is not C,
this may not work. For instance, if the main is in Ada, you get...
-data-evaluate-expression "sizeof (void*)"
^error,msg="No definition of \"sizeof\" in current context."
... and apparently decides to stop the debugging session as a result.
The recommendation sent was to specifically set the language to C
before trying to evaluate the expression. Something such as:
1. save current language
2. set language c
3. -data-evaluate-expression "sizeof (void*)"
4. Restore language
This has the same disadvantages as the ones outlined in the "Context
Management" section of the GDB/MI documentation regarding setting
the current thread or the current frame, thus recommending the use of
general command-line switches such as --frame, or --thread instead.
This patch follows the same steps for the language, adding a similar
new command option: --language LANG. Example of use:
-data-evaluate-expression --language c "sizeof (void*)"
^done,value="4"
gdb/ChangeLog:
* mi/mi-parse.h (struct mi_parse) <language>: New field.
* mi/mi-main.c (mi_cmd_execute): Temporarily set language to
PARSE->LANGUAGE during command execution, if set.
* mi/mi-parse.c: Add "language.h" #include.
(mi_parse): Add parsing of "--language" command option.
* NEWS: Add entry mentioning the new "--language" command option.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-language.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Show): Add xref anchor for "show language" command.
(Context management): Place current subsection text into its own
subsubsection. Add new subsubsection describing the "--language"
command option.
Rather than having -list-features report support for the GDB/MI
commands providing access to Ada exception catchpoints with one entry,
and the GDB/MI command providing the list of Ada exceptions with
a second entry, this patch merges it all within one single entry.
This is OK, because all these commands were added within a short
amount of time, and within the same release cycle; and it reduces
a bit the size of the output.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_list_features): Replace "info-ada-exceptions"
entry with "ada-exceptions".
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Delete
the documentation of "info-ada-exceptions" in the output
of the "-list-features" command. Add the documentation
of the "ada-exception" entry instead.
