* elf64-ppc.c (struct ppc_stub_hash_entry): Delete "addend".
(ppc64_elf_size_stubs): Don't set "addend".
(ppc64_elf_relocate_section): Don't allow calls via
toc-adjusting stubs without a following nop even in an
executable, except for self-calls and both libc_start_main
and .libc_start_main.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Update self-call
comment.
* dwarf_reader.cc (Dwarf_ranges_table::read_ranges_table): Save
reloc_type_.
(Dwarf_ranges_table::read_range_list): Call lookup_reloc.
(Dwarf_ranges_table::lookup_reloc): New function.
* dwarf_reader.h (Dwarf_ranges_table::Dwarf_ranges_table): Initialize
reloc_type_.
(Dwarf_ranges_table::lookup_reloc): New function.
(Dwarf_ranges_table::reloc_type_): New data member.
* powerpc.cc (Output_data_brlt_powerpc::reset_brlt_sizes): New
function.
(Output_data_brlt_powerpc::finalize_brlt_sizes): New function.
(Target_powerpc::do_relax): Call the above.
on garbage collected .opd section.
* powerpc.cc (Target_powerpc::do_gc_add_reference): Test dst_shndx
is non-zero.
(Target_powerpc::do_gc_mark_symbols): Likewise for sym->shndx().
(Target_powerpc::do_function_location): Likewise for loc->shndx.
* resolve.cc (Symbol::override_base): Don't override st_type
from plugin placeholder symbols.
(Symbol_table::resolve): Likewise.
(Symbol_table::should_override): Don't complain about TLS mismatch
if the TO symbol is a plugin placeholder.
* testsuite/Makefile.am (plugin_test_tls): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test_tls.sh: New test script.
* testsuite/two_file_test_2_tls.cc: New test source.
* testsuite/two_file_test_tls.cc: New test source.
gold/
* layout.cc (Layout::set_segment_offsets): Taking care of the case when
the maximum segment alignment is larger than the page size.
* testsuite/Makefile.am (large_symbol_alignment): Test that Gold
correctly aligns the symbols with large alignemnt.
* testsuite/Makefile.in: Regenerate.
* testsuite/large_symbol_alignment.cc: New file.
Sriraman Tallam <tmsriram@google.com>
* options.h (sort_section): New option.
* output.h (Input_section_sort_section_prefix_special_ordering_compare):
Rename from Input_section_sort_section_name_special_ordering_compare.
(Input_section_sort_section_name_compare): New struct.
* output.cc (Output_section::Input_section_sort_section_name_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text if --sort-section=name is specified.
* layout.cc (Layout::make_output_section):
Add sorting by name when --sort-section=name is specified.
* testsuite/Makefile.am (text_section_grouping): Test option
--sort-section=name.
* testsuite/Makefile.in: Regenerate.
* testsuite/section_sorting_name.cc: New file.
* testsuite/section_sorting_name.sh: New file.
* symtab.h (Symbol::is_cxx_vtable): New function.
* target-reloc.h (relocate_section): Check for vtable symbol.
* testsuite/Makefile.am (missing_key_func.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/missing_key_func.cc: New test source.
* testsuite/missing_key_func.sh: New test script.
* object.cc (Sized_relobj_file::get_symbol_location_info): Set
type of enclosing symbol.
(Relocate_info::location): Check symbol type when describing symbol.
* object.h (Symbol_location_info): Remove unused line_number;
add enclosing_symbol_type.
* testsuite/debug_msg.sh: Adjust expected output.
PR ld/15365
* layout.cc (Layout::finalize): Make __ehdr_start STV_HIDDEN.
ld/
PR ld/15365
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Restrict __ehdr_start's export class to no less than STV_HIDDEN.
ld/testsuite/
PR ld/15365
* ld-elf/ehdr_start.d: Expect __ehdr_start to be STB_LOCAL.
* ld-mips-elf/ehdr_start-1.nd: New test.
* ld-mips-elf/ehdr_start-2.nd: New test.
* ld-mips-elf/ehdr_start-1.ld: New test linker script.
* ld-mips-elf/ehdr_start-2.ld: New test linker script.
* ld-mips-elf/ehdr_start-new.s: New test source.
* ld-mips-elf/ehdr_start-o32.s: New test source.
* ld-mips-elf/mips-elf.exp: Run the new tests.
gold/
* output.cc (Output_section::add_merge_input_section): Allow
to merge sections if the alignment is more than character size.
* merge.h (Output_merge_string::Output_merge_string): Remove
assert.
* merge.cc (Output_merge_string<Char_type>::do_add_input_section): Count
only not-null strings. Check the alignment of strings.
* stringpool.h
(Stringpool_template<Stringpool_char>::Stringpool_template): Add
alignment as the argument.
(Stringpool_template<Stringpool_char>::addralign_): New class member.
* stringpool.cc (Stringpool_template<Stringpool_char>::new_key_offset):
Align non-zero length strings according to the addralign_.
(Stringpool_template<Stringpool_char>::set_string_offsets):
Updating offsets according to the given alignment.
* testsuite/Makefile.am (text_section_grouping): Test if string
literals are getting merged.
* testsuite/Makefile.in: Regenerate.
* testsuite/merge_string_literals_1.c: New file.
* testsuite/merge_string_literals_2.c: Ditto.
* testsuite/merge_string_literals.sh: Ditto.
gold/
* gold.cc (queue_final_tasks): invoke layout->queue_build_id_tasks().
* layout.cc (Hash_task): New class.
(Layout::queue_build_id_tasks): New function.
(Layout::write_build_id): Handle single-thread portion of build ID
computation. (In some cases, all of it is single-threaded.) Replace
{sha1,md5}_process_bytes with {sha1,md5}_buffer to get the same
functionality in fewer lines of code.
* layout.h (Layout::queue_build_id_tasks): New function declaration.
* options.h (General_options): make "--build-id" default to tree
rather than sha1. Add two new options related to --build-id=tree:
--build-id-chunk-size-for-treehash and
--build-id-min-file-size-for-treehash.
* Makefile.am: add testing of --build-id=tree and related new options
(these tests will be invoked by "make check").
* Makefile.in: Regenerate.
owner when sections are not adjacent and exceed group size.
(Target_powerpc::group_sections): Handle corner case.
(Target_powerpc::Branch_info::make_stub): Handle case where
stub table doesn't exist due to branches in non-exec sections.
(Target_powerpc::Relocate::relocate): Likewise.
* archive.cc (Archive::get_elf_object_for_member): Create the elf
object before calling the plugin claim_file handler. Pass the elf
object of the archive to the plugin. Delete the elf object if the
plugin claims the file.
* symtab.cc (Symbol_table::set_dynsym_indexes): Don't set object
is_needed by weak references. Clear version for symbols defined
in as-needed objects that are not needed.
static and public. Add report_err param. Return false for data refs.
(Target_powerpc::rela_dyn_section): New overloaded function.
(Target_powerpc::plt_, iplt_): Elucidate.
(Output_data_plt_powerpc::entry_count): Handle current_data_size()==0.
(Output_data_plt_powerpc::do_write): Don't write .iplt.
(Output_data_plt_powerpc::plt_entry_count): Don't add .iplt entries.
(Target_powerpc::Scan::local, global): Adjust reloc_needs_plt_for_ifunc
calls. Put ifunc dynamic relocs in irela_dyn_section. Only
push_branch and make_plt_entry for ifunc syms when
reloc_needs_plt_for_ifunc.
(Target_powerpc::Relocate::relocate): Don't use plt entry value
for ifunc unless reloc_needs_plt_for_ifunc.
gold/
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter. Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.
* dwarf_reader.cc (Dwarf_info_reader::check_buffer): Move
function into class definition in header file.
(Dwarf_info_reader::warn_corrupt_debug_section): New function.
* dwarf_reader.h (Dwarf_info_reader::warn_corrupt_debug_section):
New function.
(Dwarf_info_reader::check_buffer): Move here from .cc file.
* target.cc (Target::do_plt_fde_location): New function.
* ehframe.h (class FDE): Add post_map field to u_.from_linker,
accessor function, and constructor param.
(struct Post_fde, Post_fdes): Declare.
(Cie::write): Add post_fdes param.
* ehframe.cc (Fde::write): Use plt_fde_location.
(struct Post_fde): Define.
(Cie::write): Stash FDEs added post merge mapping.
(Eh_frame::add_ehframe_for_plt): Assert no new CIEs after mapping.
Adjust Fde constructor call. Bump final_data_size_ for post map FDEs.
(Eh_frame::do_sized_write): Arrange to write post map FDES after
other FDEs.
* powerpc.cc (Target_powerpc::do_plt_fde_location): New function.
(Target_powerpc::has_glink): New function.
(Target_powerpc::do_relax): Add eh_frame info for stubs.
(struct Eh_cie, eh_frame_cie, glink_eh_frame_fde_64,
glink_eh_frame_fde_32, default_fde): New data.
(Stub_table::eh_frame_added_): New var.
(Stub_table::find_long_branch_entry, stub_address, stub_offset):
Make const.
(Stub_table::add_eh_frame): New function.
(Output_data_glink::add_eh_frame): New function.
(Target_powerpc::make_glink_section): Call add_eh_frame.
2013-01-24 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::layout): Check for option text_reorder.
(Layout::make_output_section): Ditto.
* options.h (text_reorder): New option.
* output.cc (Input_section_sort_compare): Remove special ordering
of section names.
(Output_section::
Input_section_sort_section_name_special_ordering_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text.
* output.h (Input_section_sort_section_name_special_ordering_compare):
New struct.
* testsuite/Makefile.am (text_section_grouping): Test option
--no-text-reorder
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.sh: Check order of functions without
default text reordering.
The "new" dtags options have been around for 14+ years, and for all the
targets that gold supports, these flags have always existed. So enable
them by default.
Having behavior be different from ld.bfd isn't new, and this behavior
is the "better" one, so there shouldn't be a problem based on that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The "new" dtags options have been around for 14+ years, so there
shouldn't be a need to generate both new & old tags anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* layout.cc (Layout::layout): Do not do default sorting for
text sections when section ordering is specified.
(make_output_section): Ditto.
* testsuite/plugin_final_layout.cc: Name the function sections
to catch reordering issues.
linker plugins work. This patch lets linker scripts take precedence.
2013-01-09 Sriraman Tallam <tmsriram@google.com>
* output.h (sort_attached_input_sections): Change to be public.
* script-sections.cc
(Output_section_definition::set_section_addresses): Sort
attached input sections according to section order before linker
script assigns section addresses.
(Orphan_output_section::set_section_addresses): Sort
attached input sections according to section order before linker
script assigns section addresses.
* Makefile.am (final_layout.sh): Use a simple linker script to
check if section ordering still works.
* Makefile.in: Regenerate.
(Target_arm::attributes_forbid_div): New function.
(Target_arm::merge_object_attributes): Merge the Tag_DIV_use
attribute using the same new functions as what bfd/elf32_arm.c
does.
PR gold/14993
* output.cc (Output_section::add_input_section): For incremental
updates, don't track input sections that are allocated from patch
space.
PR gold/14897
* configure.ac (--enable-ld): Removed.
(install_as_default): Set to yes only for --enable-gold=default
or --disable-ld.
* configure: Regenerated.
function.
(Layout::layout): If input section requires special ordering, must
sort input sections.
(Layout::make_output_section): May sort .text input sections.
(Layout::is_section_name_prefix_grouped): Remove.
* layout.h (class Layout): Declare
special_ordering_of_input_section. Don't declare
is_section_name_prefix_grouped.
* output.cc (Output_section::add_input_section): Revert last
change.
(Output_section::Input_section_sort::match_file_name): Don't crash
if called on output section data.
(Output_section::Input_section_sort_compare): Sort based on
special ordering.
(Output_section::Input_section_sort_section_order_index_compare):
Revert last patch.
(Output_section::sort_attached_input_sections): Likewise.
by default.
2012-12-18 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::is_section_name_prefix_grouped): New function.
* layout.h (Layout::is_section_name_prefix_grouped): New function.
* output.cc (Output_section::add_input_section): Check if section
name contains special prefix. Keep input sections to sort such
sections.
(Output_section::Input_section_sort_section_order_index_compare
::operator()): Group sections according to prefixes.
* (Output_section::sort_attached_input_sections): Add condition
to Input_section_entry constructor call.
* testsuite/Makefile.am (text_section_grouping): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.cc: New file.
* testsuite/text_section_grouping.sh: New file.
(class Relocate, class Scan): Inherit Track_tls.
(Target_powerpc::Scan::local, global): Track tls optimization
and avoid creating plt entry for __tls_get_addr if all uses
are optimized away.
(Target_powerpc::Relocate::relocate): Update to use Track_tls.
* testsuite/binary_unittest.cc (read_all): New function.
(Sized_binary_test): Use it instead of ::read.
* fileread.cc (do_read): Don't assume pread always reads the whole
amount in a single call.
plt_thread_safe. Update stub_group_size help text.
* powerpc.cc (Target_powerpc::plt_thread_safe): New access function
for new plt_thread_safe_ var.
(use_plt_offset): Correct comments.
(Target_powerpc::do_relax): Look for thread creation symbols to
determine default plt_thread_safe value. Clear plt call stubs
as well as branch stubs each iteration.
(add_2_2_11, add_12_12_11, bnectr_p4, cmpldi_2_0, xor_11_11_11): New
insn constants.
(l, hi, ha, write_insn): Move earlier.
(Stub_table): Delete prev_size, add last_plt_size and last_branch_size.
(Stub_table::clear_stubs): Rename from clear_long_branch_stubs, clear
plt stubs too.
(Stub_table::update_size): Adjust.
(Stub_table::prev_size, set_prev_size): Delete.
(Stub_table::stub_align): Let --plt-align affect result.
(Stub_table::plt_call_size): Calculate sizes for various stubs.
(Stub_table::branch_stub_size): Use last_plt_size in address calc.
(Stub_table::add_plt_call_stub): Pass iterator to plt_call_size.
(Stub_table::do_write): Support more stub variants.
* layout.cc (Layout::get_executable_sections): New function.
* arm.cc (Target_arm::group_sections): Use it.
(Arm_output_section::group_sections): Delete now redundant test.
* output.cc (Output_reloc::Output_reloc): Add is_relative.
param to handle relative relocs.
* output.h (Output_reloc::Output_reloc <absolute reloc>): Likewise.
(Output_data_reloc::add_absolute): Adjust.
(Output_data_reloc::add_relative): New function.
(Output_data::reset_data_size): New function.
(Output_relaxed_input_section::set_relobj, set_shndx): New functions.
(Output_section::set_addralign): New function.
(Output_section::checkpoint_set_addralign): New function.
(Output_section::clear_section_offsets_need_adjustment): New function.
(Output_section::input_sections): Make public.
* powerpc.cc (class Output_data_brlt_powerpc): New.
(class Stub_table, class Stub_control): New.
(Powerpc_relobj::has14_, set_has_14bit_branch, has_14bit_branch,
stub_table_, set_stub_table, stub_table): New vectors and accessor
functions.
(Target_powerpc::do_may_relax, do_relax, push_branch,
new_stub_table, stub_tables, brlt_section, group_sections,
add_branch_lookup_table, find_branch_lookup_table,
write_branch_lookup_table, make_brlt_section): New functions.
(Target_powerpc::struct Sort_sections, class Branch_info): New.
(Target_powerpc::brlt_section_, stub_tables_, branch_lookup_table_,
branch_info_): New vars.
(Target_powerpc::make_plt_entry, make_local_ifunc_plt_entry): Don't
make call stubs here.
(Output_data_glink): Remove all call stub handling from this class.
(Target_powerpc::Scan::local, global): Save interesting branch
relocs and relocs for ifunc. Adjust calls to plt entry functions.
(Target_powerpc::do_finalize_sections): Only make reg save/restore
functions on final link.
(Target_powerpc::Relocate::relocate): Adjust lookup of call stubs.
Handle long branch destinations too.
(Target_powerpc::do_dynsym_value, do_plt_address_for_global,
do_plt_address_for_local): Adjust lookup of plt call stubs.
* elf32-arm.c (elf32_arm_nacl_plt0_entry): Use bic rather than bfc
instruction for data sandboxing.
gold/
* arm.cc (Output_data_plt_arm_nacl::first_plt_entry): Use bic rather
than bfc instruction for data sandboxing.
(struct Opd_ent): Use "Address" rather than "Offset".
(Output_data_got_powerpc::got_base_offset): Return Valtype.
(Target_powerpc::got_section): Make public.
(Target_powerpc::scan_relocs): Move code setting symbols..
(Powerpc_relobj::do_scan_relocs): ..to here, new function.
Create _SDA_BASE_ only when referenced.
* dwarf_reader.cc (Sized_elf_reloc_mapper::symbol_section): Cast
SYMNDX to off_t before comparing it to this->data_size().
* output.cc (Output_symtab_xindex::endian_do_write): Likewise.
* incremental.cc (Output_section_incremental_inputs::do_write):
Cast GLOBAL_SYM_COUNT to off_t before comparing it to SYMTAB_SIZE.
* elf32-arm.c (elf32_arm_print_private_bfd_data): Recognise and
display the new ARM hard-float/soft-float ABI flags for EABI_VER5
(elf32_arm_post_process_headers): Add the hard-float/soft-float
ABI flag as appropriate for ET_DYN/ET_EXEC in EABI_VER5.
binutils:
* readelf.c (decode_ARM_machine_flags): Recognise and display the
new ARM hard-float/soft-float ABI flags for EABI_VER5. Split out
the code for EABI_VER4 and EABI_VER5 to allow this.
elfcpp:
* arm.h: New enum for EABI soft- and hard-float flags.
gold:
* gold.cc (Target_arm::do_adjust_elf_header): Add the
hard-float/soft-float ABI flag as appropriate for ET_DYN/ET_EXEC
in EABI_VER5.
include:
* elf/arm.h (EF_ARM_ABI_FLOAT_SOFT): New define.
(EF_ARM_ABI_FLOAT_HARD): Likewise.
ld/testsuite:
* ld-arm/eabi-hard-float.s: New test source.
* ld-arm/eabi-soft-float.s: New test source.
* ld-arm/eabi-hard-float.d: New test.
* ld-arm/eabi-soft-float.d: New test.
* ld-arm/eabi-soft-float-ABI4.d: New test.
* ld-arm/eabi-soft-float-r.d: New test.
* ld-arm/arm-elf.xp: Use the new tests.
binutils:
PR binutils/14779
* configure.in: Add checks for wchar.h and mbstate_t.
* config.in: Regenerate.
* configure: Regenerate.
* readelf.c: Conditionally include wchar.h.
(print_symbol): Conditionally use mbstate_t.
* dwp.cc (usage): Add file and exit status parameters;
add --help and --version options.
(print_version): New function.
(main): Add --help and --version options.
* dwarf_reader.cc (Dwarf_info_reader::do_parse): Use stored
abbrev_shndx.
* dwarf_reader.h (Dwarf_info_reader::Dwarf_info_reader): Initialize
abbrev_shndx_.
(Dwarf_info_reader::set_abbrev_shndx): New method.
(Dwarf_info_reader::abbrev_shndx_): New data member.
* dwarf_reader.cc (make_elf_reloc_mapper): Check size and endianness
from object, not parameters.
(Dwarf_info_reader::parse): Likewise.
* object.h (Relobj::elfsize, Relobj::is_big_endian): New methods.
(Relobj::do_elfsize, Relobj::do_is_big_endian): New methods.
(Sized_relobj::do_elfsize, Sized_relobj::do_is_big_endian): New
methods.
dynamic relocs for GOT_TPREL got entries, without symbol if
resolving locally.
(Target_powerpc::do_gc_add_reference): Don't add for dynamic objects.
(Target_powerpc::scan_relocs): Define _GLOBAL_OFFSET_TABLE_ early.
(Target_powerpc::Relocate:relocate): REL32 reloc may be unaligned.
(Target_powerpc::do_finalize_sections): Call it.
(Output_data_save_res): New class and supporting functions.
(Target_powerpc::symval_for_branch): Only look up .opd entry for
normal symbols defined in object files.
(struct Opd_ent): Make "discard" a bit field. Add "gc_mark".
(Target_powerpc::do_gc_mark_symbol): Delay marking function code
section if scan_opd_relocs not yet called.
(Target_powerpc::gc_process_relocs): Call process_gc_mark.
do_plt_address_for_global): New functions.
(Output_data_got_powerpc::do_write): Don't segfault when linking
statically.
(Output_data_plt_powerpc::add_entry, add_ifunc_entry,
add_local_ifunc_entry): Return true on adding entry..
(Target_powerpc::make_plt_entry): ..use to avoid unnecessary
glink->add_entry call. Remove unused symtab param. Adjust calls.
(Target_powerpc::make_local_ifunc_plt_entry): Likewise.
(Target_powerpc::make_iplt_section): Remove symtab param. Don't
set up symbols here.
(Target_powerpc::do_finalize_sections): Instead set up __rela_iplt
syms here. Do so even when no .iplt. Don't segfault when linking
statically.
(Output_data_glink::add_entry, find_entry): Rearrange params. Add
new variants without reloc param.
(Glink_sym_ent::Glink_sym_ent): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Accept any
reloc when refs will resolve to plt call stub.
(Target_powerpc::Scan::local): Correct ifunc handling. Allow
R_PPC_PLTREL24 to resolve locally.
(Target_powerpc::Scan::global): Correct ifunc handling.
(Target_powerpc::Relocate::relocate): Correct local sym glink
lookup. Don't destroy "value" when we have a plt call stub,
and when checking plt call validity.
(Target_powerpc::do_dynsym_value): Simplify.
bytes, so that the 16 bit relocations have a greater chance of
working.
* tilegx.cc (Target_tilegx::do_finalize_sections): Adjust
global_offset_table_ value for larget got.
(Target_tilegx::Relocate::relocate): Handle adjusted got value.
(Target_powerpc::iplt_section, make_iplt_section,
reloc_needs_plt_for_ifunc, make_local_ifunc_plt_entry): New functions.
(Target_powerpc::make_plt_entry): Handle ifunc syms.
Target_powerpc::plt_entry_count): Count iplt entries too.
(Output_data_plt_powerpc::Output_data_plt_powerpc): Don't create
reloc section in constructor. New params.
(Target_powerpc::make_plt_section): Create reloc section here instead.
(Output_data_plt_powerpc::add_ifunc_entry, add_local_ifunc_entry): New
functions.
(Output_data_plt_powerpc::initial_plt_entry_size_, name_): New vars.
(Output_data_glink::add_entry, find_entry): New functions to
deal with local syms.
(Glink_sym_ent): Add support for local syms.
(Output_data_glink::do_write): Handle ifunc plt entries.
(Target_powerpc::Scan::get_reference_flags): Handle more relocs.
(Target_powerpc::Scan::local, global): Handle ifunc syms.
(Target_powerpc::Relocate::relocate): Likewise.
(Target_powerpc::do_dynsym_value): Use glink stub, not plt entry.
do_adjust_local_symbol): New functions.
* object.cc (Sized_relobj_file::do_count_local_symbols): Use the above.
* powerpc.cc (Powerpc_relobj::do_adjust_local_symbol): New function.
(Powerpc_relobj::scan_opd_relocs): Warn on unexpected opd relocs
and irregular opd entry spacing.
(Powerpc_relobj::do_read_relocs): Add opd size checks.
(Global_symbol_visitor_opd): New functor.
(Target_powerpc::do_finalize_sections): Omit global symbols defined
on deleted opd entries.
against symbols in discarded sections. Pass is_discarded
param.
* arm.cc, * i386.cc, * sparc.cc, * x86_64.cc (Target_*::Scan::local):
Add is_discarded param.
* powerpc (Target_powerpc::Scan::local): Likewise. Use
is_discarded to flag opd entry as discarded. Don't emit dyn
relocs on such entries.
(Target_powerpc::Scan::global): Similarly detect and handle
such opd entries.
(Powerpc_relobj): Replace opd_ent_shndx_ and opd_ent_off_ with
opd_ent_. Update all uses.
(Powerpc_relobj::get_opd_discard, set_opd_discard): New functions.
(Target_powerpc::relocate_section): Zero out discarded opd
entry relocs.
* output.cc: Rename Output_data_got template parameter from size
to got_size for all functions. Compile all variants of
Output_data_got.
(Output_data_got::Got_entry::write): Correct use of size for
symbol value. Use local_is_tls rather than casting to
Sized_relobj_file.
* object.h (class Object): Add local_is_tls and do_local_is_tls.
(class Sized_relobj_file): Add do_local_is_tls.
* incremental.h (class Sized_relobj_incr): Add do_local_is_tls.
* layout.cc (Layout::set_segment_offsets): When using
common-page-size alignment, ensure we are on a new max-page-size
page.
* output.cc (Output_segment::set_section_addresses): Use
abi_pagesize, not common_pagesize for relro boundary.
(Output_segment::set_offset): Likewise.
* gdb-index.cc (Gdb_index::pubnames_read): New parameter.
(Gdb_index::pubtypes_read): New parameter.
(Gdb_index_info_reader::read_pubnames_and_pubtypes): Add parameters
to calls.
* gdb-index.h (Gdb_index): New fields pubnames_object_ and
pubtypes_object_.
(Sized_target::gc_add_reference, do_gc_add_reference): New functions.
* gc.h (gc_process_relocs): Call target gc_add_reference.
* gold.cc (queue_middle_tasks): Use gc_mark_symbol on start sym.
* symtab.cc (Symbol_table::gc_mark_undef_symbols): Use gc_mark_symbol.
(Symbol_table::gc_mark_symbol): Call target gc_mark_symbol. Remove
unnecessary cast.
* powerpc.cc (Powerpc_relobj::get_opd_ent): Rearrange parameters
to cater for when we don't need code offset. Update use.
(Powerpc_relobj::access_from_map_, opd_valid_): New vars.
(Powerpc_relobj::access_from_map, add_reference, opd_valid,
set_opd_valid): New functions.
(Target_powerpc::do_gc_add_reference): New function.
(Target_powerpc::gc_process_relocs): Call gc()->add_reference on
stashed refs.
(Target_powerpc::do_gc_mark_symbol): New function.
(Powerpc_relobj::toc_base_offset): New stub function.
(Target_powerpc): Add tp_offset, dtp_offset. Rename
got_mod_index_offset to tlsld_got_offset. Update all refs.
(Target_powerpc::Relocate::enum skip_tls): New.
(Target_powerpc::call_tls_get_addr_): New var.
(Target_powerpc::is_branch_reloc): Move to file scope.
(Target_powerpc::relocate_tls, optimize_tls_reloc): Delete.
(Target_powerpc::optimize_tls_gd, optimize_tls_ld, optimize_tls_ie):
New functions.
(Target_powerpc::enum Got_type): Delete old values, add new ones.
(powerpc_info): Correct common_pagesize for ppc64.
(at_tls_transform, needs_dynamic_reloc, use_plt_offset): New functions.
(Powerpc_relocate_functions): Add overflow check enums and functions.
Add non-shift version of rela, rela_ua. Delete all rel public
functions. Delete addr16_lo. Add addr64, addr64_u, addr32,
addr32_u, addr24, addr16_u, addr16_hi2, addr16_ha2, addr16_hi3,
addr16_ha3, addr14 functions.
(Output_data_got_powerpc::add_constant_pair): New function.
(Output_data_got_powerpc::got_base_offset): Likewise.
(Output_data_got_powerpc::do_write): Correct 64-bit got header.
(instruction constants): Sort, add some more.
(Output_data_glink::do_write): Add and use Address typedef. Use
object->toc_base_offset() stub for 64-bit.
(Target_powerpc::tlsld_got_offset): Use add_constant_pair.
(Target_powerpc::Scan::get_reference_flags): Handle more relocs.
(Target_powerpc::Scan::local, global): Emit relative dynamic reloc
for R_PPC64_TOC. Handle more relocs. Generate got entries for TLS.
Always treat .opd relocs as against locally defined symbol.
Correct condition for RELATIVE relocs.
(Target_powerpc::do_finalize_sections): Test for NULL sections.
(Target_powerpc::Relocate::relocate): Use plt call stub as value
for 32-bit syms with a plt entry. Correct ppc64 toc base
calculations. Handle TLS relocs, and more. Add overflow
checking and adjust for Powerpc_relocate_functions changes.
(Target_powerpc::relocate_for_relocatable): Handle zero r_sym.
Reinstate --emit-relocs code with FIXME.
segments.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* gold.cc (queue_middle_tasks): Call layout again when unique
segments for sections is desired.
* layout.cc (Layout::Layout): Initialize new members.
(Layout::get_output_section_flags): New function.
(Layout::choose_output_section): Call get_output_section_flags.
(Layout::layout): Make output section for mapping to a unique segment.
(Layout::insert_section_segment_map): New function.
(Layout::attach_allocated_section_to_segment): Make unique segment for
output sections marked so.
(Layout::segment_precedes): Check for unique segments when sorting.
* layout.h (Layout::Unique_segment_info): New struct.
(Layout::Section_segment_map): New typedef.
(Layout::insert_section_segment_map): New function.
(Layout::get_output_section_flags): New function.
(Layout::is_unique_segment_for_sections_specified): New function.
(Layout::set_unique_segment_for_sections_specified): New function.
(Layout::unique_segment_for_sections_specified_): New member.
(Layout::section_segment_map_): New member.
* object.cc (Sized_relobj_file<size, big_endian>::do_layout):
Rename is_gc_pass_one to is_pass_one.
Rename is_gc_pass_two to is_pass_two.
Rename is_gc_or_icf to is_two_pass.
Check for which pass based on whether symbols data is present.
Make it two pass when unique segments for sections is desired.
* output.cc (Output_section::Output_section): Initialize new
members.
* output.h (Output_section::is_unique_segment): New function.
(Output_section::set_is_unique_segment): New function.
(Output_section::is_unique_segment_): New member.
(Output_section::extra_segment_flags): New function.
(Output_section::set_extra_segment_flags): New function.
(Output_section::extra_segment_flags_): New member.
(Output_section::segment_alignment): New function.
(Output_section::set_segment_alignment): New function.
(Output_section::segment_alignment_): New member.
(Output_segment::Output_segment): Initialize is_unique_segment_.
(Output_segment::is_unique_segment): New function.
(Output_segment::set_is_unique_segment): New function.
(Output_segment::is_unique_segment_): New member.
* plugin.cc (allow_unique_segment_for_sections): New function.
(unique_segment_for_sections): New function.
(Plugin::load): Add new functions to transfer vector.
* Makefile.am (plugin_final_layout.readelf.stdout): Add readelf output.
* Makefile.in: Regenerate.
* testsuite/plugin_final_layout.sh: Check if unique segment
functionality works.
* testsuite/plugin_section_order.c (onload): Check if new interfaces
are available.
(allow_unique_segment_for_sections): New global.
(unique_segment_for_sections): New global.
(claim_file_hook): Call allow_unique_segment_for_sections.
(all_symbols_read_hook): Call unique_segment_for_sections.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* plugin-api.h (ld_plugin_allow_unique_segment_for_sections):
New interface.
(ld_plugin_unique_segment_for_sections): New interface.
(LDPT_ALLOW_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(LDPT_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(tv_allow_unique_segment_for_sections): New member.
(tv_unique_segment_for_sections): New member.
(Powerpc_relobj): Rename got2_section_ to special_.
Add opd_ent_shndx_ and opd_ent_off_ vectors.
(Powerpc_relobj::opd_shndx, init_opd, get_opd_ent, set_opd_ent,
scan_opd_relocs, do_read_relocs, opd_ent_ndx): New functions.
(Target_powerpc): Add Address typedef and invalid_address. Use
throughout.
(Target_powerpc::is_branch_reloc): New function.
(Powerpc_relocate_functions): Add Address typedef, use throughout.
(Powerpc_relocate_functions:rela, rela_ua): Correct type used
for dst_mask, value and addend.
(Powerpc_relobj::do_find_special_sections): Find .opd for 64-bit.
(ld_2_1, cror_15_15_15, cror_31_31_31): New insn constants.
(Output_data_glink::do_write): Correct toc base. Don't try to use
uint16_t for 24-bit offset. Use get_output_section_offset and
check return.
(Target_powerpc::Scan::local): Handle more relocs.
(Target_powerpc::do_finalize_sections): Set up DT_PPC64_GLINK.
(Target_powerpc::Relocate::relocate): Correct toc base calculation.
Plug in toc restoring insn after plt calls. Translate branches
to function descriptor symbols to corresponding entry point.
(Target_powerpc::relocate_for_relocatable): Check return from
get_output_section_offset.
* symtab.h: Comment typo.
* script-sections.cc (Sections_element::output_section_name): Add
keep return parameter.
(Output_section_element::match_name): Add keep return parameter.
Return the value of the keep_ member.
* script-sections.h (class Output_section): Update
output_section_name prototype.
* layout.cc (Layout::keep_input_section): New public member
function.
(Layout::choose_output_section): Pass keep parameter to
output_section_name.
* layout.h (class Layout): Add keep_input_section.
* object.cc (Sized_relobj_file::do_layout): Check for kept input
sections.
* testsuite/Makefile.am: Add a test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr14265.c: Source file for the test.
* testsuite/pr14265.t: Linker script for the test.
* testsuite/pr14265.sh: Shell script for the test.
* ld-gc/gc.exp: Add a new test.
* ld-gc/pr14265.c: Source file for the new test.
* ld-gc/pr14265.t: Linker script for the new test.
* ld-gc/pr14265.d: Expected symbol dump.
(Target::do_output_section_name): New function.
* layout.cc (Layout::choose_output_section): Call the above.
* powerpc.cc (Target_powerpc::do_output_section_name): New function.
* powerpc.h: Add more relocs.
(R_PPC_REL16*): Rename to R_POWERPC_REL16*.
gold/
* powerpc.cc: Update for renamed R_PPC_REL16 relocs.
(Output_data_got_powerpc::do_write): Don't rely on base class lookup
for replace_constant call.
(Output_data_plt_powerpc::do_print_to_mapfile): New function.
(Output_data_glink::do_print_to_mapfile): New function.
(Target_powerpc::Scan::local): Ignore R_PPC64_TOCSAVE.
(Target_powerpc::Relocate::relocate): Likewise.
(Powerpc_relobj::do_find_special_sections): Don't use set_got2_shndx.
(Output_data_glink::add_entry,find_entry): Remove shndx param.
(class Glink_sym_ent): Rename from struct Glink_sym_ent. Remove
all references to shndx_. Handle special case for R_PPC_PLTREL24
here.
(class Glink_sym_ent_hash): Rename from struct Glink_sym_ent_hash.
(Output_data_glink::do_write): Retrieve got2_shdnx from object.
(Target_powerpc::make_plt_entry): Don't special case R_PPC_PLTREL24
here.
(Target_powerpc::Scan::global): Nor on make_plt_entry call.
(Target_powerpc::Relocate::relocate): Nor on glink->find_entry call.
(Sized_relobj_file::find_special_sections): New function.
* object.cc (Sized_relobj_file::find_shdr): New function.
(Sized_relobj_file::find_eh_frame): Use find_shdr.
(Sized_relobj_file::find_special_sections): New function, split out..
(Sized_relobj_file::do_read_symbols): ..from here.
* output.h (Output_data_got::replace_constant): New function.
(Output_data_got::num_entries): New function.
(Output_data_got::last_got_offset,set_got_size): Use num_entries.
(Output_data_got::got_offset): Protected rather than private.
(Output_data_got::replace_got_entry): New function.
* output.cc (Output_data_got::replace_got_entry): New function.
* powerpc.cc (class Powerpc_relobj): New.
(class Powerpc_relocate_functions): Delete all psymval variants or
convert to value,addend type. Delete pcrela, pcrela_unaligned.
Implement _ha functions using corresponding _hi function.
(Powerpc_relobj::find_special_sections): New function.
(Target_powerpc::do_make_elf_object): New function.
(class Output_data_got_powerpc): New.
(class Output_data_glink): New.
(class Powerpc_scan_relocatable_reloc): New.
Many more changes througout file.
PR gold/14344
* configure.ac: Add check for -gpubnames support.
* configure: Regenerate.
* testsuite/Makefile.am (gdb_index_test_1): Add check for -gpubnames
support; force -gno-pubnames.
(gdb_index_test_2, gdb_index_test_3): Add check for -gpubnames
support.
(gdb_index_test_4): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test_1.sh: Refactor code into common file.
* testsuite/gdb_index_test_2.sh: Likewise.
* testsuite/gdb_index_test_3.sh: Don't look for space after colon.
* testsuite/gdb_index_test_4.sh: New script.
* testsuite/gdb_index_test_comm.sh: New script with common code;
don't look for space after colon.
* layout.cc (gdb_sections): Remove ".debug_" prefixes,
add .debug_macro.
(lines_only_debug_sections): Likewise.
(gdb_fast_lookup_sections): New static array.
(is_gdb_debug_section): Rename formal parameter.
(is_lines_only_debug_section): Likewise.
(is_gdb_fast_lookup_section): New function.
(Layout::include_section): Check for ".zdebug_" prefix; pass
section name suffix to is_gdb_debug_section, et al.; check for
fast-lookup sections when building .gdb_index.
* options.h (--strip-debug-gdb): Update GDB version number.
* layout.cc (Layout::section_name_mapping): Add rules to handle
exact match on .data.rel.ro.local or .data.rel.ro.
(Layout::output_section_name): Check for exact matches.
elfcpp/
PR gold/14091
* x86_64.h (R_X86_64_RELATIVE64): New.
gold/
PR gold/14091
* x86_64.cc (Target_x86_64::Scan::local): For x32, generate
R_X86_64_RELATIVE64 instead of R_X86_64_RELATIVE in case of
R_X86_64_64.
* configure: Regenerate.
gold/
* nacl.cc: New file.
* nacl.h: New file.
* Makefile.am (CCFILES, HFILES): Add them.
* Makefile.in: Regenerate.
* i386.cc (Output_data_plt_i386_nacl): New class.
(Output_data_plt_i386_nacl_exec): New class.
(Output_data_plt_i386_nacl_dyn): New class.
(Target_i386_nacl): New class.
(Target_selector_i386_nacl): New class.
(target_selector_i386): Use it instead of Target_selector_i386.
* x86_64.cc (Output_data_plt_x86_64_nacl): New class.
(Target_x86_64_nacl): New class.
(Target_selector_x86_64_nacl): New class.
(target_selector_x86_64, target_selector_x32): Use it instead of
Target_selector_x86_64.
* arm.cc (Output_data_plt_arm_nacl): New class.
(Target_arm_nacl): New class.
(Target_selector_arm_nacl): New class.
(target_selector_arm, target_selector_armbe): Use it instead of
Target_selector_arm.
* target-select.cc (select_target): Take new Input_file* and off_t
arguments, pass them on to recognize method of selector.
* object.cc (make_elf_sized_object): Update caller.
* parameters.cc (parameters_force_valid_target): Likewise.
* incremental.cc (make_sized_incremental_binary): Likewise.
* target-select.h: Update decl.
(Target_selector::recognize): Take new Input_file* argument,
pass it on to do_recognize.
(Target_selector::do_recognize): Take new Input_file* argument.
* freebsd.h (Target_selector_freebsd::do_recognize): Likewise.
* powerpc.cc (Target_selector_powerpc::do_recognize): Likewise.
* sparc.cc (Target_selector_sparc::do_recognize): Likewise.
* testsuite/testfile.cc (Target_selector::do_recognize): Likewise.
* target.h (Target::Target_info): New members isolate_execinstr
and rosegment_gap.
(Target::isolate_execinstr, Target::rosegment_gap): New methods.
* arm.cc (Target_arm::arm_info): Update initializer.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info): Likewise.
* sparc.cc (Target_sparc::sparc_info): Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
* testsuite/testfile.cc (Target_test::test_target_info): Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment):
Take new const Target* argument. If target->isolate_execinstr(), act
like --rosegment.
(Layout::find_first_load_seg): Take new const Target* argument;
if target->isolate_execinstr(), reject PF_X segments.
(Layout::relaxation_loop_body): Update caller.
(Layout::set_segment_offsets): If target->isolate_execinstr(),
reset file offset to zero when we hit LOAD_SEG, and then do a second
loop over the segments before LOAD_SEG to reassign offsets after
addresses have been determined. Handle target->rosegment_gap().
(Layout::attach_section_to_segment): Take new const Target* argument;
pass it to attach_allocated_section_to_segment.
(Layout::make_output_section): Update caller.
(Layout::attach_sections_to_segments): Take new const Target* argument;
pass it to attach_section_to_segment.
* gold.cc (queue_middle_tasks): Update caller.
* layout.h (Layout): Update method decls with new arguments.
* arm.cc (Target_arm::Target_arm): Take optional argument for the
Target_info pointer to use.
(Target_arm::do_make_data_plt): New virtual method.
(Target_arm::make_data_plt): New method that calls it.
(Target_arm::make_plt_entry): Use it.
(Output_data_plt_arm::Output_data_plt_arm): Take additional argument
for the section alignment.
(Output_data_plt_arm::do_first_plt_entry_offset): New abstract virtual
method.
(Output_data_plt_arm::first_plt_entry_offset): Call it.
(Output_data_plt_arm::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_arm::get_plt_entry_size): Call it.
(Output_data_plt_arm::do_fill_plt_entry): New abstract virtual method.
(Output_data_plt_arm::fill_plt_entry): New method that calls it.
(Output_data_plt_arm::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_arm::fill_first_plt_entry): New method that calls it.
(Output_data_plt_arm::set_final_data_size): Use get_plt_entry_size
method instead of sizeof(plt_entry).
(Output_data_plt_arm::add_entry): Likewise.
Use first_plt_entry_offset method instead of sizeof(first_plt_entry).
(Target_arm::first_plt_entry_offset): Call method on this->plt_ rather
than static method.
(Target_arm::plt_entry_size): Likewise.
(Output_data_plt_arm::first_plt_entry, Output_data_plt_arm::plt_entry):
Move to ...
(Output_data_plt_arm_standard): ... here, new class.
(Output_data_plt_arm::do_write): Move guts of PLT filling to...
(Output_data_plt_arm_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_arm_standard::do_fill_plt_entry): ... and here.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Take additional argument for the PLT entry size.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset):
Use get_plt_entry_size method rather than plt_entry_size variable.
(Output_data_plt_x86_64::reserve_slot): Likewise.
(Output_data_plt_x86_64::do_adjust_output_section): Likewise.
(Output_data_plt_x86_64::add_entry): Likewise.
(Output_data_plt_x86_64::add_local_ifunc_entry): Likewise.
(Output_data_plt_x86_64::address_for_global): Likewise.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::first_plt_entry_offset): Likewise.
Make method non-static.
(Output_data_plt_x86_64::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_x86_64::get_plt_entry_size): Just call that.
(Output_data_plt_x86_64::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_x86_64::add_eh_frame): New method to call it.
(Output_data_plt_x86_64::do_fill_first_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_first_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_tlsdesc_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_tlsdesc_entry): New method to call it.
(Output_data_plt_x86_64::plt_entry_size)
(Output_data_plt_x86_64::first_plt_entry)
(Output_data_plt_x86_64::plt_entry)
(Output_data_plt_x86_64::tlsdesc_plt_entry)
(Output_data_plt_x86_64::plt_eh_frame_fde_size)
(Output_data_plt_x86_64::plt_eh_frame_fde): Move to ...
(Output_data_plt_x86_64_standard): ... here, new class.
(Target_x86_64::Target_x86_64): Take optional argument for the
Target_info pointer to use.
(Target_x86_64::do_make_data_plt): New virtual method.
(Target_x86_64::make_data_plt): New method to call it.
(Target_x86_64::init_got_plt_for_update): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_x86_64::init): Don't do add_eh_frame_for_plt here.
(Target_x86_64::first_plt_entry_offset): Call method on this->plt_
rather than static method.
(Target_x86_64::plt_entry_size): Likewise.
(Output_data_plt_x86_64::do_write): Use get_plt_entry_size method
rather than plt_entry_size variable. Move guts of PLT filling to...
(Output_data_plt_x86_64_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_x86_64_standard::do_fill_plt_entry): ... and here ...
(Output_data_plt_x86_64_standard::do_fill_tlsdesc_entry): ... and here.
* i386.cc (Output_data_plt_i386::Output_data_plt_i386): Take
additional argument for the section alignment.
Don't do add_eh_frame_for_plt here.
(Output_data_plt_i386::first_plt_entry_offset): Make the method
non-static. Use get_plt_entry_size method rather than plt_entry_size
variable.
(Output_data_plt_i386::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_i386::get_plt_entry_size): Call it.
(Output_data_plt_i386::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_i386::add_eh_frame): New method to call it.
(Output_data_plt_i386::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_first_plt_entry): New method to call it.
(Output_data_plt_i386::do_fill_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_plt_entry): New method to call it.
(Output_data_plt_i386::set_final_data_size): Use get_plt_entry_size
method instead of plt_entry_size.
(Output_data_plt_i386::plt_entry_size)
(Output_data_plt_i386::plt_eh_frame_fde_size)
(Output_data_plt_i386::plt_eh_frame_fde): Move to ...
(Output_data_plt_i386_standard): ... here, new class.
(Output_data_plt_i386_exec): New class.
(Output_data_plt_i386::exec_first_plt_entry): Move to ...
(Output_data_plt_i386_exec::first_plt_entry): ... here.
(Output_data_plt_i386::exec_plt_entry): Move to ...
(Output_data_plt_i386_exec::plt_entry): ... here.
(Output_data_plt_i386_dyn): New class.
(Output_data_plt_i386::first_plt_entry): Move to ...
(Output_data_plt_i386_dyn::first_plt_entry): ... here.
(Output_data_plt_i386::dyn_plt_entry): Move to ...
(Output_data_plt_i386_dyn::plt_entry): ... here.
(Target_i386::Target_i386): Take optional argument for the Target_info
pointer to use.
(Target_i386::do_make_data_plt): New virtual method.
(Target_i386::make_data_plt): New method to call it.
(Target_i386::make_plt_section): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_i386::add_entry): Use get_plt_entry_size method
rather than plt_entry_size variable.
(Output_data_plt_i386::add_local_ifunc_entry): Likewise.
(Output_data_plt_i386::address_for_local): Likewise.
(Output_data_plt_i386::do_write): Likewise.
Move guts of PLT filling to...
(Output_data_plt_i386_exec::do_fill_first_plt_entry): ... here ...
(Output_data_plt_i386_exec::do_fill_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_first_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_plt_entry): ... and here.
Change-Id: Id24b95600489835ff5e860a39c147203d4380c2b
* dwarf_reader.cc (Dwarf_die::address_attribute): New function.
* dwarf_reader.h (Dwarf_die::address_attribute): Likewise.
* gdb-index.cc (Gdb_index_info_reader::record_cu_ranges): Handle
DW_AT_high_pc as offset from DW_AT_low_pc.
* testsuite/Makefile.am (gdb_index_test_3.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test_3.c: New test source file.
* testsuite/gdb_index_test_3.sh: New test source file.
pointer.
(Stub_addend_reader::operator()): Declare Arm_relocate_functions
as a class, not a struct.
(Target_arm::scan_span_for_cortex_a8_erratum): Likewise.
(Target_arm::apply_cortex_a8_workaround): Likewise.
* gc.h: Declare Reloc_types as a struct, not a class.
* object.h: Declare Symbols_data as a struct.
* reloc.h: Declare Read_relocs_data as a struct.
* target.h: Declare Relocate_info as a struct.
gold/
* sparc.cc (Target_sparc::Relocate::relax_call): New function.
(Target_sparc::Relocate::relocate): Call it for R_SPARC_WDISP30
and R_SPARC_WPLT30.
magic number with symbolic constant.
(dump_incremental_inputs): Update version number.
* incremental.cc (Output_section_incremental_inputs): Update version
number; import symbolic constants from Incremental_inputs_reader.
(Incremental_inputs::create_data_sections): Align relocations
section correctly for 64-bit targets.
(Output_section_incremental_inputs::set_final_data_size): Use symbolic
constants; add padding.
(Output_section_incremental_inputs::write_header): Add assert for
header_size.
(Output_section_incremental_inputs::write_input_files): Add assert
for input_entry_size.
(Output_section_incremental_inputs::write_info_blocks): Add padding;
add assert for object_info_size, input_section_entry_size,
global_sym_entry_size.
* incremental.h (Incremental_inputs_reader): Add symbolic constants
for data structure sizes; use them.
(Incremental_input_entry_reader): Import symbolic constants from
Incremental_inputs_reader; use them.
gold/
* sparc.cc (class Target_sparc): Add elf_machine_, elf_flags_,
and elf_flags_set_.
(Target_sparc::Target_sparc): Initialize new fields.
(Target_sparc::do_make_elf_object): New function.
(Target_sparc::do_adjust_elf_header): New function.
* elfcpp_swap.h (struct Swap_aligned32): New template.
gold/
* gdb-index.cc (Gdb_index::do_write): Use Swap_aligned32 for writing
CU range table of gdb index.
gold/
* sparc.cc (Target_sparc::got_address): New function.
(Sparc_relocate_functions::gdop_hix22): New function.
(Sparc_relocate_functions::gdop_lox10): New function.
(Target_sparc::Scan::local): Do not emit a GOT entry for GOTDATA
relocs.
(Target_sparc::Scan::local): Likewise if the global symbol is not
preemptible and is not IFUNC.
(Target_sparc::Relocate::relocate): Perform GOTDATA code
transformations for local and non-preemptible non-IFUNC global
symbols.
elfcpp/
* sparc.h (R_SPARC_JMP_IREL): New relocation.
gold/
* sparc.cc (class Target_sparc): Add rela_ifunc_.
(Target_sparc::Target_sparc): Initialize new field.
(Target_sparc::do_plt_section_for_global): New function.
(Target_sparc::do_plt_section_for_local): New function.
(Target_sparc::reloc_needs_plt_for_ifunc): New function.
(Target_sparc::make_plt_section): New function, broken out of
make_plt_entry. Use ORDER_NON_RELRO_FIRST for ".plt".
(Target_sparc::make_plt_entry): Call make_plt_section.
(Target_sparc::make_local_ifunc_plt_entry): New function.
(Target_sparc::rela_ifunc_section): New function.
(Target_sparc::plt_section): Remove const.
(Output_data_plt_sparc): Update declarations. Define Global_ifunc
and Local_ifunc types. Add global_ifuncs_, local_ifuncs_, ifunc_rel_,
and ifunc_count_ fields.
(Output_data_plt_sparc::Output_data_plt_sparc): Initialize new fields.
(Output_data_plt_sparc::add_entry): Handle IFUNC symbols.
(Output_data_plt_sparc::add_local_ifunc_entry): New function.
(Output_data_plt_sparc::rela_ifunc): New function.
(Output_data_plt_sparc::emit_pending_ifunc_relocs): New function.
(Output_data_plt_sparc::has_ifunc_section): New function.
(Output_data_plt_sparc::entry_count): Include ifunc_count_.
(Output_data_plt_sparc::address_for_global): New function.
(Output_data_plt_sparc::address_for_local): New function.
(Output_data_plt_sparc::plt_index_to_offset): New function.
(Output_data_plt_sparc::set_final_data_size): Use plt_index_to_offset
and entry_count.
(Output_data_plt_sparc::do_write): Use first_plt_entry_offset and
entry_count.
(Target_sparc::Scan::get_reference_flags): Add R_SPARC_IRELATIVE and
R_SPARC_JMP_IREL to switch.
(Target_sparc::Scan::check_non_pic): Likewise.
(Target_sparc::Scan::local): Handle IFUNC symbols.
(Target_sparc::Scan::local): Likewise.
(Target_sparc::Relocate::relocate): Likewise, use plt_address_for_global
and plt_address_for_local.
(Target_sparc::do_finalize_sections): Call emit_pending_ifunc_relocs.
Define __rel_iplt_start and __rel_iplt_end if doing a static link.
* Makefile.am: Add gdb-index.cc, gdb-index.h.
* Makefile.in: Regenerate.
* dwarf_reader.cc (Sized_elf_reloc_mapper::do_initialize): New function.
(Sized_elf_reloc_mapper::symbol_section): New function.
(Sized_elf_reloc_mapper::do_get_reloc_target): New function.
(make_elf_reloc_mapper): New function.
(Dwarf_abbrev_table::clear_abbrev_codes): New function.
(Dwarf_abbrev_table::do_read_abbrevs): New function.
(Dwarf_abbrev_table::do_get_abbrev): New function.
(Dwarf_ranges_table::read_ranges_table): New function.
(Dwarf_ranges_table::read_range_list): New function.
(Dwarf_pubnames_table::read_section): New function.
(Dwarf_pubnames_table::read_header): New function.
(Dwarf_pubnames_table::next_name): New function.
(Dwarf_die::Dwarf_die): New function.
(Dwarf_die::read_attributes): New function.
(Dwarf_die::skip_attributes): New function.
(Dwarf_die::set_name): New function.
(Dwarf_die::set_linkage_name): New function.
(Dwarf_die::attribute): New function.
(Dwarf_die::string_attribute): New function.
(Dwarf_die::int_attribute): New function.
(Dwarf_die::uint_attribute): New function.
(Dwarf_die::ref_attribute): New function.
(Dwarf_die::child_offset): New function.
(Dwarf_die::sibling_offset): New function.
(Dwarf_info_reader::check_buffer): New function.
(Dwarf_info_reader::parse): New function.
(Dwarf_info_reader::do_parse): New function.
(Dwarf_info_reader::do_read_string_table): New function.
(Dwarf_info_reader::lookup_reloc): New function.
(Dwarf_info_reader::get_string): New function.
(Dwarf_info_reader::visit_compilation_unit): New function.
(Dwarf_info_reader::visit_type_unit): New function.
(Sized_dwarf_line_info::Sized_dwarf_line_info): Use
Sized_elf_reloc_mapper.
(Sized_dwarf_line_info::symbol_section): Remove function.
(Sized_dwarf_line_info::read_relocs): Use Sized_elf_reloc_mapper.
(Sized_dwarf_line_info::read_line_mappings): Remove object
parameter, adjust callers.
(Sized_dwarf_line_info::format_file_lineno): Fix type of cast.
* dwarf_reader.h: Include <sys/types.h>.
(class Track_relocs): Remove forward declaration.
(class Elf_reloc_mapper): New class.
(class Sized_elf_reloc_mapper): New class.
(class Dwarf_abbrev_table): New class.
(class Dwarf_range_list): New class.
(class Dwarf_ranges_table): New class.
(class Dwarf_pubnames_table): New class.
(class Dwarf_die): New class.
(class Dwarf_info_reader): New class.
(Sized_dwarf_line_info::read_line_mappings): Remove object parameter.
(Sized_dwarf_line_info::symbol_section): Remove member function.
* dynobj.h (Sized_dynobj::do_section_contents): Refactor code from
base class.
* gdb-index.cc: New source file.
* gdb-index.h: New source file.
* incremental.cc (Sized_relobj_incr::do_layout): Track .debug_info
and .debug_types sections, call Layout::add_to_gdb_index.
(Sized_relobj_incr::do_section_name): Implement.
(Sized_relobj_incr::do_section_contents): Adjust parameter list and
return type; Implement.
(Sized_incr_dynobj::do_section_contents): Adjust parameter list and
return type.
* incremental.h (Sized_relobj_incr::do_section_contents): Adjust
parameter list and return type.
(Sized_incr_dynobj::do_section_contents): Likewise.
* layout.cc: Include gdb-index.h.
(Layout::Layout): Initialize gdb_index_data_.
(Layout::init_fixed_output_section): Check for .gdb_index section.
(Layout::add_to_gdb_index): New function. Instantiate.
* layout.h: Add forward declaration for class Gdb_index.
(Layout::add_to_gdb_index): New member function.
(Layout::gdb_index_data_): New data member.
* main.cc: Include gdb-index.h.
(main): Print statistics for gdb index.
* object.cc (Object::section_contents): Move code into
do_section_contents.
(need_decompressed_section): Check for sections needed when building
gdb index.
(build_compressed_section_map): Likewise.
(Sized_relobj_file::do_read_symbols): Need local symbols when building
gdb index.
(Sized_relobj_file::do_layout): Track .debug_info and .debug_types
sections; call Layout::add_to_gdb_index.
(Sized_relobj_file::do_decompressed_section_contents): Call
do_section_contents directly.
* object.h (Object::do_section_contents): Adjust parameter list and
return type.
(Object::do_decompressed_section_contents): Call do_section_contents
directly.
(Sized_relobj_file::do_section_contents): Adjust parameter list and
return type.
* options.h (class General_options): Add --gdb-index option.
* plugin.cc (Sized_pluginobj::do_section_contents): Adjust parameter
list and return type.
* plugin.h (Sized_pluginobj::do_section_contents): Likewise.
* reloc.h (Track_relocs::checkpoint): New function.
(Track_relocs::reset): New function.
* testsuite/Makefile.am (gdb_index_test_1.sh, gdb_index_test_2.sh):
New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test.cc: New test source file.
* testsuite/gdb_index_test_1.sh: New test source file.
* testsuite/gdb_index_test_2.sh: New test source file.
* arm.cc (Target_arm::do_define_standard_symbols): New method.
(Target_arm::do_finalize_sections): Remove code which defines
__exidx_start and __exidx_end. Make symbol table parameter
anonymous as it is not used.
* gold.cc (queue_middle_tasks): Call target hook to define any
target-specific symbols.
* target.h (Target::define_standard_symbols): New method.
(Target::do_define_standard_symbols): Same.
* testsuite/Makefile.am (arm_exidx_test): Dump relocations also.
* testsuite/Makefile.in: Regenerate.
* testsuite/arm_exidx.s: Generate data relocations for __exidx_start
and __exidx_end.
* testsuite/arm_exidx_test.sh: Check that no unused dynamic
relocations are generated for __exidx_start and __exidx_end.
Update DWARF enums from ../include/dwarf2.h.
* dwarf.h (enum DW_TAG): Add new DWARF-4 tags.
(enum DW_FORM): Add new DWARF-4 and Fission extensions.
(enum DW_AT): New enum.
(enum DW_LINE_EXTENDED_OPS): Add new DWARF-4 opcode.
(enum DW_ENCODING): Add new DWARF-4 encoding.
(enum DW_OP): Add new DWARF-4 opcodes.
(enum DW_CHILDREN): New enum.
(enum DW_LANG): New enum.
gold/
* reduced_debug_output.cc
(Output_reduced_debug_info_section::get_die_end): Add new FORM
codes to switch.
Call Object::decompressed_section_contents.
* dwarf_reader.h (Sized_dwarf_line_info::~Sized_dwarf_line_info):
New dtor.
(Sized_dwarf_line_info::buffer_start_): New data member.
* merge.cc (Output_merge_data::do_add_input_section): Call
Object::decompressed_section_contents.
(Output_merge_string::do_add_input_section): Likewise.
* object.cc (need_decompressed_section): New function.
(build_compressed_section_map): Decompress sections needed later.
(Sized_relobj_file::do_decompressed_section_contents): New function.
(Sized_relobj_file::do_discard_decompressed_sections): New function.
* object.h (Object::decompressed_section_contents): New function.
(Object::discard_decompressed_sections): New function.
(Object::do_decompressed_section_contents): New function.
(Object::do_discard_decompressed_sections): New function.
(Compressed_section_info): New type.
(Compressed_section_map): Include decompressed section contents.
(Sized_relobj_file::do_decompressed_section_contents): New function.
(Sized_relobj_file::do_discard_decompressed_sections): New function.
* arm.cc (Arm_relocate_functions::abs8,
Arm_relocate_functions::abs16): Use
Bits::has_signed_unsigned_overflow32.
(Arm_relocate_functions::thm_abs8): Correct range of
overflow check.
* reloc.h (Bits class): Change minimum number of bits from 0 to 1
in assertions.
definition and ...
(read_unsigned_LEB_128_x): ... this new function.
(read_signed_LEB_128): Replaced with inline definition and ...
(read_signed_LEB_128_x): ... this new function.
* int_encoding.h (read_unsigned_LEB_128_x): New function.
(read_unsigned_LEB_128): Add inline definition.
(read_signed_LEB_128_x): New function.
(read_signed_LEB_128): Add inline definition.
* testsuite/Makefile.am (leb128_unittest): New unit test.
* testsuite/Makefile.in: Regenerate.
* testsuite/leb128_unittest.cc: New unit test.
2012-01-22 H.J. Lu <hongjiu.lu@intel.com>
* x86_64.cc (gc_process_relocs): Add typename on types used in
template.
(scan_relocs): Likewise.
(relocate_section): Likewise.
(apply_relocation): Likewise.
2012-01-10 H.J. Lu <hongjiu.lu@intel.com>
* x86_64.cc (Scan::check_non_pic): Allow R_X86_64_32 for x32.
(Scan::local): Use R_X86_64_RELATIVE relocation for R_X86_64_32
under x32.
Use abstract base class for GOT.
* gold/output.h (class Output_data_got_base): New abstract base class.
(class Output_data_got): Derive from new base class, adjust ctors.
(Output_data_got::reserve_slot): Make virtual; rename to
do_reserve_slot; Adjust callers.
* gold/target.h (Sized_target::init_got_plt_for_update): Return
pointer to abstract base class.
* gold/x86_64.cc (Target_x86_64::init_got_plt_for_update): Likewise.
(Relobj::local_plt_offset): New function.
(Relobj::local_has_got_offset): New function.
(Relobj::local_got_offset): New function.
(Relobj::set_local_got_offset): New function.
(Relobj::do_local_symbol_value): New pure virtual function.
(Relobj::do_local_plt_offset): Likewise.
(Relobj::do_local_has_got_offset): Likewise.
(Relobj::do_local_got_offset): Likewise.
(Relobj::do_set_local_got_offset): Likewise.
(Sized_relobj::do_local_has_got_offset): Rename from
local_has_got_offset.
(Sized_relobj::do_local_got_offset): Rename from local_got_offset.
(Sized_relobj::do_set_local_got_offset): Rename from
set_local_got_offset.
(Sized_relobj_file::do_local_plt_offset): Rename from
local_plt_offset.
(Sized_relobj_file::do_local_symbol_value): New function.
* object.cc (Sized_relobj_file::do_local_plt_offset): Rename from
local_plt_offset.
* output.cc (Output_data_got::Got_entry::write): Change object to
Relobj. Use local_symbol_value.
(Output_data_got::add_global_with_rel): Change rel_dyn to
Output_data_reloc_generic*. Use add_global_generic.
(Output_data_got::add_global_with_rela): Remove. Change all
callers to use add_global_with_rel.
(Output_data_got::add_global_pair_with_rel): Change rel_dyn to
Output_data_reloc_generic*. Use add_global_generic.
(Output_data_got::add_global_pair_with_rela): Remove. Change all
callers to use add_global_pair_with_rel.
(Output_data_got::add_local): Change object to Relobj*.
(Output_data_got::add_local_plt): Likewise.
(Output_data_got::add_local_with_rel): Change object to Relobj*,
change rel_dyn to Output_data_reloc_generic*. Use
add_local_generic.
(Output_data_got::add_local_with_rela): Remove. Change all
callers to use all_local_with_rel.
(Output_data_got::add_local_pair_with_rel): Change object to
Relobj*, change rel_dyn to Output_data_reloc_generic*. Use
add_output_section_generic.
(Output_data_got::add_local_pair_with_rela): Remove. Change all
callers to use add_local_pair_with_rel.
(Output_data_got::reserve_local): Change object to Relobj*.
* output.h: (class Output_data_reloc_generic): Add pure virtual
declarations for add_global_generic, add_local_generic,
add_output_section_generic.
(class Output_data_reloc) [SHT_REL, SHT_RELA]: Implement new
functions for Output_data_reloc_generic. Update declarations for
changes listed in output.cc.
(class Output_data_got): Change template parameter to got_size.
Don't define Rel_dyn or Rela_dyn. Update declarations per above.
* incremental.h (Sized_relobj_incr::do_local_symbol_value): New
function.
(Sized_relobj_incr::do_local_plt_offset): New function.
* copy-relocs.cc (Copy_relocs::Copy_reloc_entry::emit): Call
add_global_generic.
* script.cc (script_include_directive): Implement.
(read_script_file): New local variables name and search_path. Update
comment. Call IS_ABSOLUTE_PATH and Dirsearch::find_file_in_dir_list.
* dirsearch.h (Dirsearch::find_file_in_dir_list): Declare new method.
* dirsearch.cc (Dirsearch::find_file_in_dir_list): Implement it.
NATIVE_LINKER.
* Makefile.am (AM_CPPFLAGS): Define TOOLLIBDIR.
* options.cc (General_options::finalize): Use library search path
from configure script if specified. If not native and no sysroot,
only search TOOLLIBDIR.
* options.h (Search_directory::Search_directory): Change name to
const std::string&.
(General_options::add_to_library_path_with_sysroot): Change arg to
const std::string&.
* configure, Makefile.in, config.in: Rebuild.
we are working around the ARM1176 Erratum.
* options.h (General_options::fix_arm1176): Add option.
* testsuite/Makefile.am: Add testcases, and keep current ones
working.
* testsuite/Makefile.in: Regenerate.
* testsuite/arm_fix_1176.s: New file.
* testsuite/arm_fix_1176.sh: Likewise.
* expression.cc (Expression::eval_with_dot): Add
is_section_dot_assignment parameter.
(Expression::eval_maybe_dot): Likewise. Adjust value when rhs is
absolute and assigning to dot within a section.
* script-sections.cc
(Output_section_element_assignment::set_section_addresses): Pass
dot_section to set_if_absolute.
(Output_section_element_dot_assignment::finalize_symbols): Pass TRUE
as is_section_dot_assignment flag to eval_with_dot.
(Output_section_element_dot_assignment::set_section_addresses):
Likewise.
* script.cc (Symbol_assignment::set_if_absolute): Add dot_section
parameter. Also set value if relative to dot_section; set the
symbol's output_section.
* script.h (Expression::eval_with_dot): Add is_section_dot_assignment
parameter. Adjust all callers.
(Expression::eval_maybe_dot): Likewise.
(Symbol_assignment::set_if_absolute): Add dot_section parameter.
Adjust all callers.
* testsuite/script_test_2.t: Test assignment of an absolute value
to dot within an output section element.
