* bfd/elf64-sparc.c: Add FreeBSD support.
(elf64_sparc_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_sparc_freebsd_vec.
* bfd/config.bfd (sparc64-*-freebsd*): Set targ_defvec to bfd_elf64_sparc_freebsd_vec.
* bfd/configure.in: Add entry for bfd_elf64_sparc_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-sparc.c (md_parse_option): Treat any target starting with elf32-sparc
as a viable target for the -32 switch and any target starting with elf64-sparc as a
viable target for the -64 switch.
(sparc_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64
while for 32-bit ELF flavoured output use ELF_TARGET_FORMAT.
* gas/config/tc-sparc.h (ELF_TARGET_FORMAT, ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf64_sparc_fbsd.sh (OUTPUT_FORMAT): Define as elf64-sparc-freebsd.
* elf-eh-frame.c (skip_cfa_op): Fix handling of DW_CFA_advance_loc.
Handle DW_CFA_{remember,restore}_state, DW_CFA_GNU_window_save,
DW_CFA_val_{offset{,_sf},expression}.
(skip_non_nops): Record number of DW_CFA_set_loc ops.
(_bfd_elf_discard_section_eh_frame): Require skip_non_nops recognizes
all ops. If there are any DW_CFA_set_loc ops and they are pcrel
or going to be pcrel, compute set_loc array.
(_bfd_elf_eh_frame_section_offset): If make_relative, kill relocations
against DW_CFA_set_loc operands.
(_bfd_elf_write_section_eh_frame): Handle DW_CFA_set_loc adjusting.
* ld-elf/eh4.d: New test.
* ld-elf/eh4.s: New file.
* ld-elf/eh4a.s: New file.
* pei-i386.c (COFF_SECTION_ALIGNMENT_ENTRIES): Enable 16 byte
alignment for .data$, .rdata$ and .text$ sections so that sse
and sse2 code will work for linkonce sections too.
* pe-i386.c (COFF_SECTION_ALIGNMENT_ENTRIES): Likewise.
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* archures.c: Add definition for bfd_mach_arm_iWMMXt2.
* cpu-arm.c (processors): Add bfd_mach_arm_iWMMXt2.
(arch_info_struct, bfd_arm_update_notes): Likewise.
(architectures): Likewise.
(bfd_arm_merge_machines): Check for iWMMXt2.
* bfd-in2.h: Rebuild.
gas/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* config/tc-arm.c (arm_cext_iwmmxt2): New.
(enum operand_parse_code): New code OP_RIWR_I32z.
(parse_operands): Handle OP_RIWR_I32z.
(do_iwmmxt_wmerge): New function.
(do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
a register.
(do_iwmmxt_wrwrwr_or_imm5): New function.
(insns): Mark instructions as RIWR_I32z as appropriate.
Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
(md_begin): Handle IWMMXT2.
(arm_cpus): Add iwmmxt2.
(arm_extensions): Likewise.
(arm_archs): Likewise.
gas/testsuite/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* gas/arm/iwmmxt2.s: New file.
* gas/arm/iwmmxt2.d: New file.
include/opcode/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm.h (ARM_CEXT_IWMMXT2, ARM_ARCH_IWMMXT2): Define.
opcodes/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
only be used with the default multiply-add operation, so if N is
set, don't bother printing X. Add new iwmmxt instructions.
(IWMMXT_INSN_COUNT): Update.
(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
with a 'c' suffix.
(print_insn_coprocessor): Check for iWMMXt2. Handle format
specifiers 'r', 'i'.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
* elf.c (_bfd_elf_copy_private_header_data): Fix group members
that have had their SHT_GROUP section removed.
* objcopy.c (group_signature): New function, split out from..
(setup_section): ..here.
(is_strip_section): Return true for SHT_GROUP sections that are
going to lose their group signature symbol.
2006-09-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3197
* elflink.c (elf_link_output_extsym): Compute bucket only if
needed.
ld/testsuite/
2006-09-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3197
* ld-elf/hash.d: New test.
* elf32-arm.c (elf32_arm_swap_symbol_out): Remove
unconditional setting of low bit for Thumb symbol
mistakenly left behind after check for external
symbols was added. Fix comment typo.
* elf32-xtensa.c (xtensa_get_property_section_name): Delete.
(xtensa_get_property_section): New.
(xtensa_read_table_entries): Use xtensa_get_property_section.
(relax_property_section, xtensa_get_property_predef_flags): Handle
group name suffixes in property section names.
(match_section_group): New.
gas/
* config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
(INIT_LITERAL_SECTION_NAME): Delete.
(lit_state struct): Remove segment names, init_lit_seg, and
fini_lit_seg. Add lit_prefix and current_text_seg.
(init_literal_head_h, init_literal_head): Delete.
(fini_literal_head_h, fini_literal_head): Delete.
(xtensa_begin_directive): Move argument parsing to
xtensa_literal_prefix function.
(xtensa_end_directive): Deallocate lit_prefix field of lit_state.
(xtensa_literal_prefix): Parse the directive argument here and
record it in the lit_prefix field. Remove code to derive literal
section names.
(linkonce_len): New.
(get_is_linkonce_section): Use linkonce_len. Check for any
".gnu.linkonce.*" section, not just text sections.
(md_begin): Remove initialization of deleted lit_state fields.
(xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
to init_literal_head and fini_literal_head.
(xtensa_move_literals): Likewise. Skip literals for .init and .fini
when traversing literal_head list.
(match_section_group): New.
(cache_literal_section): Rewrite to determine the literal section
name on the fly, create the section and return it.
(xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
(xtensa_switch_to_non_abs_literal_fragment): Likewise.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Use xtensa_get_property_section from bfd.
(retrieve_xtensa_section): Delete.
* doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
description to refer to plural literal sections and add xref to
the Literal Directive section.
(Literal Directive): Describe new rules for deriving literal section
names. Add footnote for special case of .init/.fini with
--text-section-literals.
(Literal Prefix Directive): Replace old naming rules with xref to the
Literal Directive section.
ld/
* emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*.
* scripttempl/elfxtensa.sc (.text): Add .literal.*.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
2006-08-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3015
* elf.c (get_program_header_size): Add a PT_GNU_RELRO segment
only if there is a PT_DYNAMIC segment.
(_bfd_elf_map_sections_to_segments): Likewise.
(assign_file_positions_for_load_sections): Set PT_GNU_RELRO
segment alignment to 1.
ld/testsuite/
2006-08-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3015
* ld-elf/binutils.exp: Add tests for "-z relro".
(elf32_mn10300_count_hash_table_entries): New.
(elf32_mn10300_list_hash_table_entries): New.
(sort_by_value): New.
(mn10300_elf_relax_section): Don't skip data sections; restrict
code-specific tests to code-specific areas so that potential
indirect calls can be detected. Check for multiple local symbols
at the same address and merge their flags.
(elf32_mn10300_link_hash_newfunc): Initialize value.
* coff-arm.c (coff_arm_rtype_to_howto) [COFF_WITH_PE]: Handle ARM_SECREL.
(coff_arm_reloc_type_lookup): Map BFD_RELOC_32_SECREL to ARM_SECREL.
* pe-arm.c [COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* pei-arm.c [TARGET_UNDERSCORE]: Define for ARM_WINCE like in pe-arm.c.
[COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* config/tc-arm.c: Move "dwarf2dbg.h" inclusion out of OBJ_ELF only block.
(pe_directive_secrel) [TE_PE]: New function.
(md_pseudo_table) [!OBJ_ELF]: Handle 2byte, 4byte, 8byte, file, loc, loc_mark_labels.
[TE_PE]: Handle secrel32.
(output_relax_insn): Remove OBJ_ELF around dwarf2_emit_insn call.
(output_inst): Remove OBJ_ELF around dwarf2_emit_insn call.
(arm_frob_label): Remove OBJ_ELF around dwarf2_emit_label call.
(md_section_align): Only round section sizes here for AOUT targets.
(tc_arm_regname_to_dw2regnum): Move out for OBJ_ELF only block.
(tc_pe_dwarf2_emit_offset): New function.
(md_apply_fix) [TE_PE]: Handle BFD_RELOC_32_SECREL.
(cons_fix_new_arm): Handle O_secrel.
* config/tc-arm.h : Move DWARF2_LINE_MIN_INSN_LENGTH, DWARF2_DEFAULT_RETURN_COLUMN and DWARF2_CIE_DATA_ALIGNMENT out of OBJ_ELF only block.
[TE_PE]: Define O_secrel, TC_DWARF2_EMIT_OFFSET, and declare tc_pe_dwarf2_emit_offset.
* ld-pe/pe.exp: Enable tests on arm-wince-pe.
* ld-pe/secrel.d: Adjust test to work on arm-wince-pe too.
* lexsup.c: Add --print-gc-sections and --no-print-gc-sections switches.
* ld.texinfo: Document new switches.
* NEWS: Mention new switches.
* bfdlink.h (struct bfd_link_info): New field: print_gc_sections.
* elflink.c (elf_gc_sweep): If info.print_gc_sections is true, list removed sections to stderr.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
* bfd/elf64-x86-64.c: Add FreeBSD support.
(elf64_x86_64_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_x86_64_freebsd_vec.
* bfd/config.bfd (x64_64-*-freebsd*): Add bfd_elf64_x86_64_freebsd_vec to the targ_selvecs.
* bfd/configure.in: Add entry for bfd_elf64_x86_64_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-i386.c (md_parse_option): Treat any target starting with elf64_x86_64 as a viable target for the -64 switch.
(i386_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64.
* gas/config/tc-i386.h (ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf_x86_64_fbsd.sh (OUTPUT_FORMAT): Define as elf64-x86-64-freebsd.
bfd/
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_ADD_IMM.
gas/
* tc-arm.c (do_t_add_sub): Use addw/subw when source is PC.
(md_convert_frag): Use correct reloc for add_pc. Use
BFD_RELOC_ARM_T32_ADD_IMM for normal add/sum.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_ADD_IMM.
(arm_force_relocation): Handle BFD_RELOC_ARM_T32_ADD_IMM.
gas/testsuite/
* gas/arm/thumb2_add.d: New test.
* gas/arm/thumb2_add.s: New test.
2006-07-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/2884
* elflink.c (_bfd_elf_merge_symbol): Copy the symbol info from
the old versioned dynamic definition to the new one with
non-default visibility. Hide the symbol if it is hidden or
internal.
ld/testsuite/
2006-07-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/2884
* ld-elf/begin.c: New file.
* ld-elf/end.c: Likewise.
* ld-elf/endhidden.c: Likewise.
* ld-elf/endprotected.c: Likewise.
* ld-elf/foo.c: Likewise.
* ld-elf/foo.map: Likewise.
* ld-elf/hidden.out: Likewise.
* ld-elf/main.c: Likewise.
* ld-elf/normal.out: Likewise.
* ld-elf/shared.exp: Likewise.
* lib/ld-lib.exp (run_cc_link_tests): New.
2006-07-12 Matthew R. Dempsky <mrd@alkemio.org>
* cpu-m68k.c (bfd_m68k_compatible): Handle CPU32.
ld/testsuite/
2006-07-12 Richard Sandiford <richard@codesourcery.com>
* ld-m68k/merge-ok-1c.d: New test.
* ld-m68k/m68k.exp: Run it.
bfd/
* elf32-arm.c (elf32_arm_swap_symbol_out): Don't set low
bit for undefined symbols.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/use-thumb-lib.s: New file.
* ld-arm/use-thumb-lib.sym: New file.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
* elf32-mips.c: Expand comment about ABI-mandated pagesize values.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): define in a more obvious way.
* elf64-mips.c, elfn32-mips.c (ELF_MAXPAGESIZE): Fix value for IRIX6.
Delete old comments.
(ELF_COMMONPAGESIZE): Define in a more obvious way.
[ ld/ChangeLog ]
* emulparams/elf64bmip.sh, emulparams/elf64btsmip.sh (COMMONPAGESIZE):
Define.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/multi-got-no-shared.d: Adjust for recent change of
ELF_MAXPAGESIZE.
* elflink.c (elf_link_add_object_symbols): Fix the warning message about
mismatched alignments to allow for the case where the common alignment
has been deduced from the section alignment.
* bfd.c (_bfd_default_error_handler): Update comment to explain why bfd
and asection varargs are out of order.
Explicitly catch and abort on NULL bfd and asection arguments.
* elfxx-mips.c (mips_elf_link_hash_table): Add function_stub_size.
(STUB_ORI): New macro.
(STUB_LI16U): Fix formatting.
(MIPS_FUNCTION_STUB_SIZE): Delete.
(MIPS_FUNCTION_STUB_MAX_SIZE): Likewise.
(MIPS_FUNCTION_STUB_NORMAL_SIZE): New macro.
(MIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(_bfd_mips_elf_adjust_dynamic_symbol): Use htab->function_stub_size
instead of MIPS_FUNCTION_STUB_SIZE.
(count_section_dynsyms): New function, split out from
_bfd_mips_elf_final_link.
(_bfd_mips_elf_always_size_sections): Get a worst-case estimate
of the number of dynamic symbols needed and use it to set up
function_stub_size. Use function_stub_size rather than
MIPS_FUNCTION_STUB_SIZE to determine the size of the stub section.
Use 16-byte stubs for 0x10000 dynamic symbols.
(_bfd_mips_elf_size_dynamic_sections): Use htab->function_stub_size
instead of MIPS_FUNCTION_STUB_SIZE. Fix formatting.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise. Change the
size of the stub buffer from MIPS_FUNCTION_STUB_MAX_SIZE to
MIPS_FUNCTION_STUB_BIG_SIZE. Tweak the check for unhandled dynindxes.
Use MIPS_FUNCTION_STUB_BIG_SIZE rather than a hard-coded 20.
Use STUB_ORI rather than STUB_LI16U for big stubs.
(_bfd_mips_elf_link_hash_table_create): Initialize function_stub_size.
(_bfd_mips_elf_final_link): Use count_section_dynsyms.
ld/testsuite/
* ld-mips-elf/stub-dynsym-1.s,
* ld-mips-elf/stub-dynsym-1.ld,
* ld-mips-elf/stub-dynsym-1-7fff.d,
* ld-mips-elf/stub-dynsym-1-8000.d,
* ld-mips-elf/stub-dynsym-1-fff0.d,
* ld-mips-elf/stub-dynsym-1-10000.d,
* ld-mips-elf/stub-dynsym-1-2fe80.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
(STUB_LUI): New macro.
(STUB_LI16U): Ditto.
(STUB_LI16S): Ditto.
(MIPS_FUNCTION_STUB_SIZE): Rewrote to take info parameter.
(_bfd_mips_elf_adjust_dynamic_symbol): Pass info parameter to
MIPS_FUNCTION_STUB_SIZE.
(_bfd_mips_elf_always_size_sections): Ditto.
(_bfd_mips_elf_size_dynamic_sections): Ditto.
(_bfd_mips_elf_finish_dynamic_sections): Ditto.
(_bfd_mips_elf_finish_dynamic_symbol): Rewrote stub generation
to allow larger symbol table indexes.
PR ld/2723
* elflink.c (bfd_elf_final_link): Don't output section symbols
for special ELF sections.
ld/testsuite/
Update for removal of some section syms.
* elf.c (assign_file_positions_for_load_sections): Retrieve
maxpagesize from m->p_align if it is valid. Set p_vaddr,
p_paddr and p_align earlier. Revert 2006-05-19 change to p_align.
(copy_elf_program_header): Copy p_align. Set p_align_valid.
include/elf/
* internal.h (elf_segment_map): Add p_align and p_align_valid.
(ignore_section_sym): New function.
(elf_map_symbols): Use ignore_section_sym to discard some syms.
(_bfd_elf_symbol_from_bfd_symbol): Ensure section belongs to
bfd before using elf_section_syms.
instead of _GLOBAL_OFFSET_TABLE_.
(bfin_relocate_section): Ditto.
(_bfin_create_got_section): Ditto.
(elf32_bfinfdpic_create_dynamic_sections): Use
__PROCEDURE_LINKAGE_TABLE_ instead of _PROCEDURE_LINKAGE_TABLE_.
(bfin_finish_dynamic_symbol): Use __DYNAMIC instead of _DYNAMIC.
* elflink.c (_bfd_elf_add_dynamic_entry): Remove DT_TEXTREL
check.
(bfd_elf_final_link): Add a late DT_TEXTREL check.
* elfxx-mips.c (MIPS_ELF_READONLY_SECTION): Define.
(mips_elf_create_dynamic_relocation): Set DF_TEXTREL.
(_bfd_mips_elf_check_relocs): Delete MIPS_READONLY_SECTION.
Use MIPS_ELF_READONLY_SECTION.
(_bfd_mips_elf_size_dynamic_sections): Clear DF_TEXTREL after
creating DT_TEXTREL.
(_bfd_mips_elf_finish_dynamic_sections): Clear textrel markers
if no text relocations were generated.
ld/testsuite/
* ld-mips-elf/textrel-1.d: Relax some patterns.
(assign_file_positions_for_load_sections): Only add SEC_ALLOC
sections to p_memsz. Remove hack for PT_NOTE sections. Allow
section alignment to increase p_align for PT_LOAD.
(assign_file_positions_for_non_load_sections): Remove ARM BPABI
hack for PT_DYNAMIC. Instead, set p_filesz for all segments
other than PT_LOAD, and PT_NOTE in core.
* elf32-xtensa.c (check_loop_aligned): Fix reversed check for
undefined opcode. Clean up assertions.
(narrow_instruction, widen_instruction): Remove "do_it" parameters.
Factor most of the code into separate functions....
(can_narrow_instruction, can_widen_instruction): New.
(prev_instr_is_a_loop): New.
(compute_ebb_proposed_actions): Combine error handling code for
decode errors. Replace call to insn_decode_len with inline code.
Use can_narrow_instruction and can_widen_instruction. Handle errors
from call to xtensa_opcode_is_loop.
(relax_section): Adjust calls to narrow_instruction and
widen_instruction.
gas:
* config/tc-xtensa.c (is_direct_call_opcode, is_branch_jmp_to_next,
xg_assemble_vliw_tokens, xtensa_mark_narrow_branches,
xtensa_fix_short_loop_frags, is_local_forward_loop, relax_frag_immed):
Handle errors from calls to xtensa_opcode_is_* functions.
* elfcode.h (valid_section_index_p): New function: Checks for a valid section
index. Allows indicies in the range SHN_LOPROC to SHN_HIOS.
(elf_object_p): Use valid_section_index_p.
symbols which are not going to be placed into the symbol table.
* coffcode.h (coff_write_relocs): Produce an error message if a an
out-of-range symbol index is detected in a reloc.
(elf_s390_relocate_section): Add code to do the GD->LE and
LD->LE TLS linker optimizations if a brasl instruction is used
for the __tls_get_offset function call.
* elf64-s390.c (invalid_tls_insn): Call bfd_set_error.
R_PPC64_TPREL64 and R_PPC64_DTPMOD64 relocs when they are in
the .toc and referenced by a TLS code sequence.
(ppc64_elf_edit_toc): Cater for the unlikely situation that
.toc is the first section in a file.
regs instead of an array of int.
(struct external_solaris_bcp_core): Likewise.
(swapcore_sun3): Use offsetof instead of computing the offset
manually.
(swapcore_sparc): Likewise. Simplify reference to c_regs.
(swapcore_solaris_bcp): Likewise.
(higher_prime_number): Correct test for no larger prime. Don't
abort on error, instead return 0. Depopulate primes[].
(bfd_hash_lookup): If we overflow size, refuse to grow table.
* tekhex.c (getvalue): Change return type to bfd_boolean and
add the new parameter. Return false if the unexpected character
is found.
(getsym): Likewise.
(first_phase): Change return type to bfd_boolean and return
false if the unexpected character is found. Replace abort
with returning false.
(pass_over): Change return type to bfd_boolean and the type of
the second argument to bfd_boolean (*) (bfd *, int, char *).
Return false if FUNC returns false.
(tekhex_object_p): Return NULL if pass_over fails.
PR binutils/2593
* elf.c (_bfd_elf_new_section_hook): Don't set section ELF type
and flags if its BFD flags have been set.
(_bfd_elf_init_private_section_data): Don't copy the output ELF
section type from input if it has been set to something
different.
* elfcode.h (elf_object_p): Allow files with corrupt e_shstrndx fields to
still be handled as ELF files.
* readelf.c (SECTION_NAME): Cope with a missing string table.
(process_file_header): Cope with a corrupt e_shstrndx field.
(process_section_headers): Correctly handle an e_shstrndx value of SHF_UNDEF.
(compute_text_actions): Use it to decode opcodes outside inner loop.
(check_section_ebb_pcrels_fit): Add "reloc_opcodes" argument, and if
it is set, use it to get the opcodes for relocations.
(move_shared_literal): Adjust call to check_section_ebb_pcrels_fit.
PR ld/2513
* elf32-i386.c (GOT_TLS_MASK): New macro for tls_type.
(GOT_TLS_IE_IE): Likewise.
(GOT_TLS_IE_GD): Likewise.
(GOT_TLS_IE_MASK): Likewise.
(elf_i386_check_relocs): For global symbols, set GOT_TLS_IE_GD
and GOT_TLS_IE_IE for R_386_TLS_GD and R_386_TLS_IE
respectively.
(allocate_dynrelocs): If both GOT_TLS_IE_IE and GOT_TLS_IE_GD
are set, treat tls_type as GOT_TLS_IE_BOTH.
(elf_i386_relocate_section): Likewise.
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* elfxx-ia64.c (elfNN_ia64_relax_section): Skip unneeded passes
with the skip_relax_pass_0 and skip_relax_pass_1 bits in the
section structure.
include/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_link_info): Replace need_relax_finalize with
relax_pass.
ld/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/ia64elf.em: Set link_info.relax_pass to 2. Remove
link_info.need_relax_finalize.
* ldlang.c (relax_sections): New.
(lang_process): Use. Call relax_sections link_info.relax_pass
times.
* ldmain.c (main): Set link_info.relax_pass to 1. Remove
link_info.need_relax_finalize.
James E Wilson <wilson@specifixinc.com>
PR ld/2442
* elfxx-ia64.c (elfNN_ia64_dyn_sym_info): Remove next.
(elfNN_ia64_local_hash_entry): Add count, sorted_count and
size.
(elfNN_ia64_link_hash_entry): Likewise.
(elfNN_ia64_new_elf_hash_entry): Initialize count, sorted_count
and size.
(elfNN_ia64_hash_copy_indirect): Updated elfNN_ia64_dyn_sym_info
processing.
(elfNN_ia64_hash_hide_symbol): Likewise.
(elfNN_ia64_global_dyn_sym_thunk): Likewise.
(elfNN_ia64_local_dyn_sym_thunk): Likewise.
(elfNN_ia64_global_dyn_info_free): New function.
(elfNN_ia64_local_dyn_info_free): Likewise.
(elfNN_ia64_hash_table_free): Free local and global
elfNN_ia64_dyn_sym_info.
(addend_compare): New function.
(sort_dyn_sym_info): Likewise.
(get_dyn_sym_info): Updated to use binary search for addend.
(elfNN_ia64_check_relocs): Scan relocations to create dynamic
relocation arrays first.
PR ld/2404
* elflink.c (_bfd_elf_merge_symbol): Skip the default indirect
symbol from the dynamic definition with the default version if
its type and the type of existing regular definition mismatch.
(mips_elf_local_got_index): Use the hash table entry to record
the GOT index of forced-local symbols.
(mips_elf_initialize_tls_index): Rearrange code. Store the index
in either the hash table entry or the mips_got_entry, not both.
Add more commentary.
(mips_elf_multi_got): Make sure the g->next is nonnull when calling
mips_elf_initialize_tls_index.
* ld-mips-elf/tls-hidden3a.s, ld-mips-elf/tls-hidden3b.s,
* ld-mips-elf/tls-hidden3.d, ld-mips-elf/tls-hidden3.got,
* ld-mips-elf/tls-hidden3.ld, ld-mips-elf/tls-hidden3.r,
* ld-mips-elf/tls-hidden4a.s, ld-mips-elf/tls-hidden4b.s,
* ld-mips-elf/tls-hidden4.got, ld-mips-elf/tls-hidden4.r: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* cpu-m68k.c (bfd_m68k_compatible): Treat ISA A+ and ISA B code as
incompatible. Likewise MAC and EMAC code.
* elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Use
bfd_get_compatible to set the new bfd architecture. Rely on it
to detect incompatibilities.
gas/
* config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
mcfemac instead of mcfmac.
ld/testsuite/
* ld-m68k/merge-error-1a.s, ld-m68k/merge-error-1b.s,
* ld-m68k/merge-error-1a.d, ld-m68k/merge-error-1b.d,
* ld-m68k/merge-error-1c.d, ld-m68k/merge-error-1d.d,
* ld-m68k/merge-error-1e.d, ld-m68k/merge-ok-1a.d,
* ld-m68k/merge-ok-1b.d: New tests.
* ld-m68k/m68k.exp: Run them.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* elf32-ppc.c (ppc_elf_relocate_section): Copy addend from
first relocation to the second when relaxing TLS GD to LE;
zero it out when relaxing to IE.
ld/testsuite/ChangeLog:
* ld-powerpc/tls32.s: Verify that +32768 @plt addend is
discarded.
against __GLOBAL_OFFSET_TABLE__ need never be dynamic. Tweak
last change to REL32 relocs so that they are counted as
possibly dynamic as per REL24 and REL14.
* elf32-mips.c (mips_elf_adjust_addend): New function, mostly split
out from...
(_bfd_mips_elf_relocate_section): ...here. Use it to adjust r_addend
for final links too.
ld/testsuite/
* ld-mips/emit-relocs-1a.s, ld-mips/emit-relocs-1b.s,
* ld-mips/emit-relocs-1.ld, ld-mips/emit-relocs-1.d: New test.
* ld-mips/mips-elf.exp: Run it.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
* elf32-ppc.c (is_ppc_elf_target): Return true if the target is
bfd_elf32_powerpc_vxworks_vec.
ld/testsuite/
* ld-i386/vxworks1.ld (.data): New section.
* ld-i386/vxworks1-lib.s: Add a pointer to a local symbol.
* ld-i386/vxworks1-lib.rd: Test for the associated reloc.
* ld-powerpc/vxworks1.ld (.data): New section.
* ld-powerpc/vxworks1-lib.s: Add a pointer to a local symbol.
* ld-powerpc/vxworks1-lib.rd: Test for the associated reloc.
* elf32-i386.c (elf_i386_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(elf_i386_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf32-ppc.c (ppc_elf_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(ppc_elf_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf-vxworks.c (elf_vxworks_create_dynamic_sections): New function.
* elf-vxworks.h (elf_vxworks_create_dynamic_sections): Declare.
ld/testsuite/
* ld-i386/ld-i386/vxworks1-lib.nd: New test.
* ld-i386/i386.exp: Run it.
* ld-powerpc/ld-powerpc/vxworks1-lib.nd: New test.
* ld-powerpc/powerc.exp: Run it.
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
ld/
* emulparams/elf32ppccommon.sh: New file, extracted from...
* emulparams/elf32ppc.sh: ...here.
* emulparams/elf32ppcvxworks.sh: Include elf32ppccommon.sh
instead of elf32ppc.sh.
(BSS_PLT): Remove override.
* Makefile.am (eelf32lppc.c): Depend on elf32ppccommons.h.
(eelf32lppcnto.c, eelf32lppcsim.c, eelf32ppcnto.c): Likewise.
(eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppcsimm): Likewise.
(eelf32ppclinux.c): Likewise.
(eelf32ppcvxworks.c): Likewise. Add missing vxworks.sh dependency.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-powerpc/vxworks1-lib.s, ld-powerpc/vxworks1-lib.dd,
* ld-powerpc/vxworks1-lib.rd, ld-powerpc/vxworks1.s,
* ld-powerpc/vxworks1.dd, ld-powerpc/vxworks1.rd,
* ld-powerpc/vxworks1.ld, ld-powerpc/vxworks1.sd: New test.
* ld-powerpc/powerpc.exp: Run it.
* elf32-i386.c (elf_i386_link_hash_table): Add next_tls_desc_index.
(elf_i386_link_hash_table_create): Initialize it.
(elf_i386_compute_jump_table_size): Use it instead of
srelplt->reloc_count.
(allocate_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
ld/testsuite/
* ld-i386/emit-relocs.s, ld-i386/emit-relocs.d: New test.
* ld-i386/i386.exp: Run it.
PR ld/2322
* elf.c (get_segment_type): New function.
(_bfd_elf_print_private_bfd_data): Use it.
(print_segment_map): New function.
(assign_file_positions_for_segments): Call print_segment_map
when there are not enough room for program headers.
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
traditional MIPS ELF targets.
gas:
* configure.tgt: set emulation for mips-*-netbsd*
ld:
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Use the traditional target.
PR binutils/2338
* dwarf2.c (check_function_name): New function.
(_bfd_dwarf2_find_nearest_line): Use check_function_name to
check if function is correct.
* elfxx-mips.c (mips_elf_initialize_tls_index): If a TLS symbol
has already been assigned a GOT index, copy that index to the
current hash table entry.
ld/testsuite/
* ld-mips-elf/tls-hidden2a.s, ld-mips-elf/tls-hidden2b.s,
* ld/testsuite/ld-mips-elf/tls-hidden2.d,
* ld/testsuite/ld-mips-elf/tls-hidden2-got.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
PR binutils/2096
* dwarf2.c (comp_unit_contains_address): Update comment.
(_bfd_dwarf2_find_nearest_line): Use section's vma, instead of
lma. Return TRUE only if both comp_unit_contains_address and
comp_unit_find_nearest_line return TRUE.
(_bfd_dwarf2_find_line): Use section's vma, instead of lma.
