This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
Enum values rename as well. All uses updated.
* valprint.h (value_print_options): Rename member pretty to
pretty format. Rename member prettyprint_arrays to
prettyformat_arrays. Rename member prettyprint_structs to
prettyformat_structs. All uses updated.
(get_no_prettyformat_print_options): Renamed from
get_raw_print_options.
* valprint.c (get_no_prettyformat_print_options): Renamed from
get_raw_print_options. All callers updated.
(show_prettyformat_structs): Renamed from show_prettyprint_structs.
All callers updated.
(show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
All callers updated.
(_initialize_valprint): Improve help text for "set print pretty" and
"set print arrays".
testsuite/
* gdb.base/default.exp: Update expected output of "show print array"
and "show print pretty".
* c-valprint.c (c_value_print): Use value_addr for
references. Convert back to reference type with value_ref.
gdb/testsuite
* gdb.cp/class2.cc (main): New local 'aref'.
* gdb.cp/class2.exp: Check printing of 'aref'.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* c-valprint.c (c_val_print): For character arrays
with "print null" option on, print ellipses if
the output is truncated and the next character is not \000.
* valprint.c (MAX_WCHARS): Define.
(WCHAR_BUFLEN): Likewise.
(WCHAR_BUFLEN_MAX): Likewise.
(struct converted_character): New structure.
(count_next_character): New function.
(print_converted_chars_to_obstack): New function.
(generic_printstr): Rewrite using count_next_character
and print_converted_chars_to_obstack.
* gdb.base/printcmds.c: Add invalid_XXX globals
for repeated byte tests.
* gdb.base/printcmds.exp (test_repeat_bytes): New procedure.
* gdb.base/wchar.c (main): Add and construct a wchar_t
array with repeated characters.
* gdb.base/wchar.exp: Add repeated character tests.
* p-valprint.c (pascal_val_print) <TYPE_CODE_PTR>: Optionally
print space before string or vtbl.
* m2-valprint.c (print_unpacked_pointer): Optionally print space
before string.
* jv-valprint.c (java_value_print): Print space before string.
* go-valprint.c (print_go_string): Print space before string.
* f-valprint.c (f_val_print) <TYPE_CODE_PTR>: Optionally print
space before string.
* c-valprint.c (c_val_print) <TYPE_CODE_PTR>: Optionally print
space before string or vtbl.
* auxv.c (fprint_target_auxv): Print space after address.
* c-valprint.c (c_value_print): Use value_rtti_indirect_type
instead of value_rtti_target_type.
* eval.c (evaluate_subexp_standard): Use value_rtti_indirect_type
instead of value_rtti_target_type.
* typeprint.c (whatis_exp): Use value_rtti_indirect_type instead of
value_rtti_target_type.
* valops.c (value_ind): Extract function readjust_indirect_value_type.
(value_rtti_target_type): Rename to ...
(value_rtti_indirect_type): ... here and make it indirect. Update
function comment.
* value.c (readjust_indirect_value_type): New function.
(coerce_ref): Support for enclosing type setting for references
with readjust_indirect_value_type.
* value.h (readjust_value_type): New declaration.
(value_rtti_target_type): Rename to ...
(value_rtti_indirect_type): ... here.
Display @entry parameter values even for references.
* ada-valprint.c (ada_val_print_1) <TYPE_CODE_REF>: Try also
coerce_ref_if_computed.
* c-valprint.c (c_val_print) <TYPE_CODE_REF>: Likewise.
* dwarf2expr.c (dwarf_block_to_dwarf_reg_deref): New function.
(execute_stack_op) <DW_OP_GNU_entry_value>: Add -1 deref_size to the
existing push_dwarf_reg_entry_value call. Add new detection calling
dwarf_block_to_dwarf_reg_deref. Update the error message.
(ctx_no_push_dwarf_reg_entry_value): New parameter deref_size.
* dwarf2expr.h
(struct dwarf_expr_context_funcs) <push_dwarf_reg_entry_value>: Add new
parameter deref_size, describe it in the comment.
(ctx_no_push_dwarf_reg_entry_value): Add new parameter deref_size.
(dwarf_block_to_dwarf_reg_deref): New declaration.
* dwarf2loc.c (dwarf_entry_parameter_to_value): Add new parameter
deref_size, describe it in the function comment. New variables
data_src and size, fetch the alternative block accoring to DEREF_SIZE.
(dwarf_expr_push_dwarf_reg_entry_value): Add new parameter deref_size,
describe it in the function comment. Fetch the alternative block
accoring to DEREF_SIZE.
(entry_data_value_coerce_ref, entry_data_value_copy_closure)
(entry_data_value_free_closure, entry_data_value_funcs): New.
(value_of_dwarf_reg_entry): New variables checked_type, target_type,
outer_val, target_val, val and addr. Try to fetch and create also
referenced value content.
(pieced_value_funcs): NULL value for coerce_ref.
(needs_dwarf_reg_entry_value): Add new parameter deref_size.
* f-valprint.c (f_val_print) <TYPE_CODE_REF>: Try also
coerce_ref_if_computed.
* opencl-lang.c (opencl_value_funcs): NULL value for coerce_ref.
* p-valprint.c (pascal_val_print) <TYPE_CODE_REF>: Likewise.
* stack.c (read_frame_arg): Compare also dereferenced values.
* value.c (value_computed_funcs): Make the parameter v const, use
value_lval_const for it.
(value_lval_const, coerce_ref_if_computed): New function.
(coerce_ref): New variable retval. Call also coerce_ref_if_computed.
* value.h (struct lval_funcs): New field coerce_ref.
(value_computed_funcs): Make the parameter v const.
(value_lval_const, coerce_ref_if_computed): New declarations.
gdb/testsuite/
Display @entry parameter values even for references.
* gdb.arch/amd64-entry-value.cc (reference, datap, datap_input): New
functions.
(main): New variables regvar, nodatavarp, stackvar1, stackvar2. Call
reference and datap_input.
* gdb.arch/amd64-entry-value.exp (reference, breakhere_reference): New
breakpoints.
(continue to breakpoint: entry_reference: reference)
(entry_reference: bt at entry)
(continue to breakpoint: entry_reference: breakhere_reference)
(entry_reference: bt, entry_reference: ptype regparam)
(entry_reference: p regparam, entry_reference: ptype regparam@entry)
(entry_reference: p regparam@entry, entry_reference: p ®param@entry)
(entry_reference: p regcopy, entry_reference: p nodataparam)
(entry_reference: p nodataparam@entry): New tests.
* gdb.trace/unavailable.cc (struct Virtual): New.
(virtualp): New global pointer.
* gdb.trace/unavailable.exp (gdb_collect_globals_test): Test
printing a pointer to an object whose type has a vtable, with
print object on.
gdb/
* value.h (value_entirely_available): Declare.
* value.c (value_entirely_available): New function.
* c-valprint.c (c_value_print): Don't try fetching the pointer's
real type if the pointer is unavailable.
* c-valprint.c (c_value_print): When doing virtual base pointer
adjustment, create a new value with adjusted contents rather than
changing the contents of the value being printed (and getting it
wrong).
gdb/testsuite/
* gdb.cp/virtbase.cc (VirtualBase, VirtualMiddleA, VirtualMiddleB)
(Virtual): New structs.
(virtual_o, virtual_middle_b): New globals.
* gdb.cp/virtbase.exp: New tests.
Don't lose embedded_offset in printing routines throughout.
gdb/
* valprint.h (val_print_array_elements): Change prototype.
* valprint.c (val_print_array_elements): Add `embedded_offset'
parameter, and adjust to pass it down to val_print, while passing
`valaddr' or `address' unmodified. Take embedded_offset into
account when checking repetitions.
* c-valprint.c (c_val_print): Pass embedded_offset to
val_print_array_elements instead of adjusting `valaddr' and
`address'.
* m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
embedded_offset to val_print_array_elements instead of adjusting
`valaddr'.
* p-lang.h (pascal_object_print_value_fields): Adjust prototype.
* p-valprint.c (pascal_val_print): Pass embedded_offset to
val_print_array_elements and pascal_object_print_value_fields
instead of adjusting `valaddr'.
(pascal_object_print_value_fields): Add `offset' parameter, and
adjust to use it.
(pascal_object_print_value): Add `offset' parameter, and adjust to
use it.
(pascal_object_print_static_field): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* ada-valprint.c (val_print_packed_array_elements): Add `offset'
parameter, and adjust to use it. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(ada_val_print): Rename `valaddr0' parameter to `valaddr'.
(ada_val_print_array): Add `offset' parameter, and adjust to use
it.
(ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
`embedded_offset' to `offset'. Don't re-adjust `valaddr'.
Instead work with offsets. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents. Change `defer_val_int' local type to CORE_ADDR,
and use value_from_pointer to extract a target pointer, rather
than value_from_longest.
(print_variant_part): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(ada_value_print): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(print_record): Add `offset' parameter, and adjust to pass it
down.
(print_field_values): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
Use value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* d-valprint.c (dynamic_array_type): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* jv-valprint.c (java_print_value_fields): Add `offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_print_value_fields): Take `offset' into account. Don't
re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_val_print): Take `embedded_offset' into account. Pass it to
java_print_value_fields.
* f-valprint.c (f77_print_array_1): Add `embedded_offset'
parameter. Don't re-adjust `valaddr' or `address'. Instead pass
down adjusted offsets.
(f77_print_array): Add `embedded_offset' parameter. Pass it down.
(f_val_print): Take `embedded_offset' into account.
gdb/testsuite/
* gdb.base/printcmds.c (some_struct): New struct and instance.
* gdb.base/printcmds.exp (test_print_repeats_embedded_array): New
procedure.
<global scope>: Call it.
Wide_Characters and Wide_Wide_Characters are incorrectly printed.
Consider for instance:
Medium : Wide_Character := Wide_Character'Val(16#dead#);
Trying to print the value of this variable yields:
(gdb) p medium
$1 = 57005 '["ad"]'
The integer value is correct (57005 = 0xdead), but the character
representation is not, it should be:
$1 = 57005 '["dead"]'
Same for Wide_Wide_Characters.
There were two issues:
(a) The first issue was in ada-valprint, where we were assuming
that character types were 1 byte long;
(b) The second problem was in c-valprint, where we were down-casting
the integer value of the character to type `unsigned char',
causing use to lose all but the lowest byte.
gdb/ChangeLog:
* ada-valprint. (ada_printchar): Use the correct type length
in call to ada_emit_char.
* c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
* dwarf2read.c (read_array_type): Read the DW_AT_byte_size from the
DIE and set the length of the type.
* gdbtypes.h (get_array_bounds): Move here from valprint.h.
* gdbtypes.c (get_array_bounds): Move here from valprint.c and
return 0 if the corresponding bounds of the type are undefined.
* valprint.h (get_array_bounds): Move declaration to gdbtypes.h.
* valprint.c (get_array_bounds): Move implementation to gdbtypes.c.
(val_print_array_elements): Use get_array_bounds to compute the number
of array elements instead of dividing the length of the array by the
length of the element types.
* valarith.c (vector_binop): Likewise.
* valops.c (value_cast): Likewise.
* c-valprint.c (c_val_print): Likewise.
* c-typeprint.c (c_type_print_varspec_suffix): Likewise.
gdb/testsuite:
* gdb.base/gnu_vector.exp: Adjust expect messages.
* c-valprint.c (c_val_print): Add embedded_offset to address in
call to val_print_array_elements.
2010-07-13 Tom Tromey <tromey@redhat.com>
* gdb.python/py-prettyprint.c (struct arraystruct): New struct.
(main): Use it.
* gdb.python/py-prettyprint.exp (run_lang_tests): Add test.
gdb
* c-valprint.c (c_val_print): Fix printing of character vectors.
gdb/testsuite
* gdb.arch/altivec-abi.exp: Fix expect pattern of character vectors.
* p-typeprint.c (pascal_type_print_base): Use TYPE_ERROR_NAME.
* m2-valprint.c (m2_val_print): Use TYPE_ERROR_NAME.
* gdbtypes.h (TYPE_ERROR_NAME): New macro.
* f-valprint.c (f_val_print): Use TYPE_ERROR_NAME.
* f-typeprint.c (f_type_print_base): Use TYPE_ERROR_NAME.
* dwarf2read.c (tag_type_to_type): Create a new error type on
failure.
* c-valprint.c (c_val_print): Use TYPE_ERROR_NAME.
* c-typeprint.c (c_type_print_base): Use TYPE_ERROR_NAME.
* charset.c: White space.
* c-lang.c: White space.
* cli-out.c: White space.
* coffread.c: White space.
* complaints.c: White space.
* completer.c: White space.
* corefile.c: White space.
* corelow.c: White space.
* cp-abi.c: White space.
* cp-namespace.c: White space.
* cp-support.c: White space.
* cp-valprint.c: White space.
* c-typeprint.c: White space.
* c-valprint.c: White space.
