OBJDUMP_FOR_TARGET, NM_FOR_TARGET; they're not used.
(AS_FOR_TARGET, CC_FOR_TARGET, OBJDUMP, OBJDUMP_FOR_TARGET, NM, NM_FOR_TARGET):
Don't define.
(VMS_OTHER_OBJS): Add xmalloc.o and xexit.o from libiberty.
(tooldir): Use exec_prefix, not libdir.
(uninstall): Don't set OBJDUMP and OBJDUMPFLAGS in site.exp.
* config/default.exp: Default OBJDUMP and OBJDUMPFLAGS. Use findfile and
transform procedures to determine objdump program name.
requiring that the X_op_symbol be in the text_section.
(macro): Change the test for a legel expression difference to
correspond to changes in pseudo_set in read.c.
get VERSION from Makefile.in and add to mk.tmp.
(mips-idt-ecoff) [TDEFINES]: Add TARGET_BYTES_BIG_ENDIAN.
* mpw-make.in (VERSION, gC): Don't define.
(ALL_CFLAGS): Remove -d flags.
(config.h): Remove definition of MPW, add HAVE_STDARG_H,
BFD_ASSEMBLER.
in_range.
(in_range): Deleted. All calls changed to in_range_*signed.
(create_lita_section): Macro deleted. Single use expanded in place.
(alpha_ip): Handle `t' and `8' operand types.
(md_apply_fix): Handle BFD_RELOC_12_PCREL. Print name of unhandled relocation
types.
* alpha-opcode.h: Added HALT and DRAINA. Disabled MOVI, since it doesn't work,
and isn't supported by the native assembler.
(tc_frob_file): Define to call pa_check_eof.
* config/tc-hppa.c (pa_check_current_space_and_subspace): New
function to verify the current space and subspace are reasonable.
Call for the appropriate pseudo-ops and before instruction parsing.
(pa_check_eof): New function to verify enter/exit and proc/procend
pairs match at EOF.
(pa_code): Simplify.
* config/obj-som.c: Delete #if 0 code.
offset within the current subspace along with updating the
alignment of the subspace itself.
(pa_subspace): Default alignment to one byte rathern than zero
bytes to avoid setting alignment to log2(0).
(md_pseudo_table): Use pa_alignment for .align.
definition.
(tc_frob_symbol): Make this condition on OBJ_SOM or OBJ_ELF. For
ELF, subtract out the symbol->section->vma for non-common symbols.
* gas/testsuite/gas/hppa/unsorted/unsorted.exp (importbug): Tweak
to match current expected ELF output.
* gas/testsuite/gas/hppa/reloc/reloc.exp
(do_plabel_relocation_test, do_r_no_reloc): Likewise.
* configure.in: Put AC_DEFINE(sparcv9) on its own line, so that the shell
variable settings associated with it are permanent. For CPUs requiring
bfd_gas=yes, select it based on CPU only, not individual target names. Handle
m68k-hp-hpux*, not just -hpux.
* config/tc-z8k.c (tc_coff_symbol_emit_hook): Add dummy argument to match
prototype in obj-coff.h.
* configure.in: Skip tests for defining WANT_FOPEN_BIN and IBM_COMPILER_SUX.
* acconfig.h: Deleted them.
* configure, conf.in: Rebuild with autoconf 2.0.
* config/go32.cfg, config/vms-conf.h: Updated.
* config/tc-m68k.c (md_apply_fix_2, md_convert_frag_1): Always use
IBM_COMPILER_SUX version of code, with comments indicating why.
* listing.c (file_info): Use text mode when opening file for read. Use "r"
directly, no macro.
* input-file.c (input_file_open): Don't use FOPEN_RT, just use "r".
* read.c (s_include): Ditto.
* output-file.c (output_file_create): Try both "wb" and "w", don't bother with
FOPEN_* macros.
* as.h: Don't include fopen-*.h.
* config/alpha-opcode.h: Make "ret" with no operands equivalent to "ret
zero,(ra)", to match OSF1 and to be consistent with both one-operand forms.
Patches from DJ Delorie:
* as.h (alloca): undef alloca before defining it just in case
* config/go32.cfg: new file for autoconf values
* config/te-go32.h: new file
* configure.bat: new for autoconf
* config/tc-i386.c (md_assemble): Fix typo in GOTPC check; had = for ==.
* configure.in: If target_frag doesn't exist, use /dev/null.
* as.c (parse_args): For non-VMS systems, re-add `v' to std_shortopts. Add
"verbose" to list of long options.
* write.c (adjust_reloc_syms): When generating an absolute section symbol as a
placeholder, don't mark it as used in a relocation entry, here.
* Makefile.in (comparison): Compare using makefile code from gcc, stripped down
to discard subdir stuff and adapted to give a non-zero exit status if either
file differs.
(md_begin): Don't mips_cpu if it was already set.
(md_parse_option): For -mipsN, don't set mips_cpu if it was
already set. For -mcpu=, just set mips_cpu, not mips_isa.
(s_elf_section): New static function.
* ecoff.c (ecoff_build_symbols): Don't abort if we don't recognize
the section when setting the storage class; default to sc_Data.
(define_some_regs): Add new special register names defined on the
29040.
(parse_operand): Add argument opt. If non-zero, don't warn about
a missing operand.
(machine_ip): If handling argument type 'I', pass opt as non-zero
to parse_operand. Handle new optional operand type 'I'.
(md_undefined_symbol): Handle special register names (srNN).
rather than explicitly adding the frag address.
* config/obj-coff.c (coff_frob_symbol): Add a zero entry to mark
the end of the line numbers; this replaces the zero entry which
used to be added by coff_add_linesym, removed Oct 7.
(coff_adjust_section_syms): Ignore sections with no seginfo.
Update the RS/6000 assembler for recent gas changes.
both it and TC_M88K.
(coff_adjust_section_syms): New function.
(coff_frob_section): For non-empty sections, create aux entry for the section
symbol, indicating the size.
(n_line_nos): New variable.
(add_lineno): Increment it.
(coff_add_linesym): Increment n_line_nos, don't call add_lineno.
(coff_frob_file): New function; map coff_adjust_section_syms over sections.
(obj_coff_line): Only reset line_base for .bf symbols.
* config/obj-coff.h (coff_adjust_section_syms, coff_frob_file): Declare.
(obj_frob_file): New macro.
* config/obj-coff.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Renamed from
obj_frob_forward_symbol, and rewritten for new parameter list.
undefined or in expr_section.
(resolve_symbol_value, case O_add): For symbol plus constant-valued symbol,
convert to O_symbol and re-reduce.
(S_GET_VALUE): If symbol needs resolving, resolve it.
(indent_level): No longer static.
(print_symbol_value_1): Don't print frag address if it matches
zero_address_frag. Don't print "resolving" if already resolved. Print segment
name. Don't call print_expr_1 on an undefined symbol.
(print_expr_1): Fix whitespace before printing X_add_number.
calling fix_new_exp recursively.
(adjust_reloc_syms): If a fixup's symbol value is a sum of an undefined symbol
and a constant, fold the constant into the fixup, and refer to the undefined
symbol directly. Then process the fixup again from scratch.
(write_object_file): Before calling adjust_reloc_syms, make a pass through the
symbol list trying to resolve values.
(print_fixup): New routine, for debugging.
(write_relocs): Call bfd_install_relocation. Deleted various hacks for working
around problems with bfd_perform_relocation.
ChangeLog ecoff.c read.c
* ecoff.c (ecoff_generate_asm_lineno): check if
current_stabs_filename is NULL before strcmp.
* read.c (read_a_source_file): fxi a bug in generate_asm_lineno
checking.
* symbols.c (copy_symbol_attributes): New function. Copies BFD symbol flags
and calls OBJ_COPY_SYMBOL_ATTRIBUTES.
(resolve_symbol_value, case O_symbol): Call it, if X_add_number is zero. Don't
call obj_frob_forward_symbol.
* read.c (pseudo_set): Call copy_symbol_attributes, but only if X_add_number is
zero.
* config/obj-elf.h (obj_frob_forward_symbol): Deleted.
(ppc_stabx): Set sy_tc.within of a C_STSYM symbol to
ppc_current_block. Don't move around any stab symbol, just those
for common symbols.
(ppc_bs): Set ppc_current_block.
(ppc_es): Clear ppc_current_block.
(ppc_frob_symbol): Set the value of a C_STSYM symbol to the offset
from the csect of the enclosing block.
PR 5658.
invoke it.
[BFD_ASSEMBLER]: Copy BSF_FUNCTION setting too.
* config/obj-elf.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Define.
Also minor VMS support from Pat Rankin.
(S_SET_DESC, S_GET_OTHER, S_GET_TYPE, S_GET_DESC): Likewise.
(obj_attach_unwind_info): Do not define. Not needed anymore.
* config/tc-hppa.c: Delete whitespace at EOL.
(struct hppa_fix_struct): Delete fx_unwind field and all references.
(fix_new_hppa): Last arg is now a pointer to an int. Do not
call obj_attach_unwind_info anymore. For SOM R_ENTRY and R_EXIT
fixups, store 32bits of unwind information in the fx_addnumber
field of the fixup.
(md_assemble, pa_entry, process_exit, pa_procend): For SOM R_ENTRY
and R_EXIT fixups, pass a NULL pointer to fix_new_hppa, and a
pointer to 32 bits of unwind info.
(tc_gen_reloc): For SOM R_ENTRY and R_EXIT fixups, set the symbol
pointer to the dummy symbol; set the addend field to fx_addnumber.
(pa_comm, pa_equ, pa_type_args, pa_import): Use bfd_XXX_section_ptr
rather than &bfd_XXX_section.
* config/obj-coff.c (do_relocs_for): If TC_KEEP_FX_OFFSET
is defined, put the tx_offset into the r_offset.
* config/tc-sh.c (line_comment_chars): Add #
(tc_reloc_mangle): Deleted.
* config/tc-sh.h (TC_KEEP_FX_OFFSET): Define.
(TC_RELOC_MANGLE): Delete.
is defined, put the tx_offset into the r_offset.
* config/tc-sh.c (line_comment_chars): Add #
(tc_reloc_mangle): Deleted.
* config/tc-sh.h (TC_KEEP_FX_OFFSET): Define.
(TC_RELOC_MANGLE): Delete.
handling of program_transform_name.
* configure.in: Test for "unlink" and "delete", define USE_DELETE_FOR_UNLINK if
only the latter is found. Not expected to be triggered on UNIX/POSIX systems.
* acconfig.h (USE_DELETE_FOR_UNLINK): Undef here, provide comments.
Update for autoconf 1.118:
* gdbinit.in: New file, created from old .gdbinit.
* .gdbinit: Deleted.
* aclocal.m4 (GAS_GDBINIT): Deleted.
* configure.in: Don't use it. Instead, generate .gdbinit from gdbinit.in.
Don't substitute cpu_type, obj_format, emulation, atof. Switched order of
AC_LINK_FILES arguments. Use AC_PREREQ to ensure that older versions of
autoconf aren't used.
* Makefile.in: Added @configure_input@ line.
(configure): Deleted rule.
[regenerated conf.in, configure]
(struct _i386_insn): New field disp_reloc.
(GOT_symbol): New variable.
(operand_special_chars): Added square-brackets and at-sign.
(reloc) [BFD_ASSEMBLER]: Added new argument OTHER; if it is not NO_RELOC, just
return it.
(reloc) [! BFD_ASSEMBLER]: Add third argument to dummy macro.
(BFD_RELOC_386_PLT32, _GOT32, _GOTOFF) [! BFD_ASSEMBLER]: More dummy macros.
(tc_i386_fix_adjustable): New function. Returns zero if symbol in fixup is not
local, to prevent relocations against externals from being dropped.
(md_assemble): Initialize disp_reloc field to NO_RELOC. Pass disp_reloc field
to reloc() function, and use TC_RELOC to generate value to pass to fix_new_exp.
(md_assemble): Change 32-bit reloc against GOT_symbol into a GOTPC reloc.
(i386_operand): Initialize disp_reloc field to NO_RELOC. Handle @GOTOFF, @PLT,
@GOT operands. For GOTOFF relocations with local symbols, force generation of
the section symbol.
(md_estimate_size_before_relax): If GOT_symbol exists, decide we're generating
PIC code, and convert relocations against undefined symbols from PCREL to
PLT32.
(md_apply_fix_1) [OBJ_ELF]: Fix up values for dynamic-linking relocs.
(md_undefined_symbol): Notice GLOBAL_OFFSET_TABLE_NAME and set and return
GOT_symbol if it matches.
(F, MAP): Move macro definitions outside function.
(tc_gen_reloc): Only switch on size and pcrel if code wasn't already supplied
as PLT32. GOT32, GOTOFF, or GOTPC. Convert BFD_RELOC_32 using GOT_symbol into
GOTPC.
* tc-i386.h (TC_RELOC, tc_fix_adjustable, TC_RELOC_GLOBAL_OFFSET_TABLE,
TC_RELOC_RTSYM_LOC_FIXUP): New macros.
(NEED_FX_R_TYPE): Define.
(LOCAL_LABEL): Accept ".X" prefix too.
(GLOBAL_OFFSET_TABLE_NAME): Default to "_GLOBAL_OFFSET_TABLE_".
just return the symbol. If operator is O_constant, resolve the symbol's value
before returning.
(operand): Permit use of "[]" for grouping.
(clean_up_expression): For difference of two symbols in the same frag, add the
difference of their offsets into X_add_number.
(expr): Reduce difference of two symbols in same frag to their difference.
(s_mips_globl): New static function; needed for Irix 5 support.
* ecoff.c (ecoff_build_symbols): If BSF_FUNCTION is set for an
external symbol with no type, set the type to st_Proc rather than
st_Global. Don't set the index of an external st_Proc or
st_StaticProc symbol unless it is also a local symbol.
ChangeLog read.h read.c ecoff.h ecoff.c
* read.h : ditto.
* read.c (read_a_source_file): if no file when inst is read, set
generate_asm_lineno to true.
* ecoff.h : change name to generate_asm_lineno and add function
ecoff_no_current_file.
* ecoff.c : change name to generate_asm_lineno.
* ecoff.c (ecoff_generate_asm_lineno) : new function, to generate
ecoff style line for asm file.
