This patch changes a few more spots to use either cmd_sfunc_ftype or
cmd_cfunc_ftype, as appropriate. This is a bit cleaner.
Tested by rebuilding.
2014-07-01 Tom Tromey <tromey@redhat.com>
* breakpoint.c (add_catch_command): Use cmd_sfunc_ftype.
* breakpoint.h (add_catch_command): Use cmd_sfunc_ftype.
* cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype.
* command.h (cmd_cfunc_ftype): Move earlier.
(add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq)
(add_com, add_info): Use cmd_cfunc_ftype.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
sys/param.h on recent versions of powerpc glibc ends up including
asm/elf.h via asm/sigcontex.h. asm/elf.h defines R_PPC_* and R_PPC64_*
macros, which clash with our include/elf/ppc.h and include/elf/ppc64.h.
It turns out that no current source uses LD_PATHMAX, so there is no
need for limits.h or sys/param.h, except for one occurrence of UINT_MAX.
I don't have a quarrel with limits.h, but it seems unnecessary just
for UINT_MAX.
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
Makes the ld srec tests pass. Uses a horrible scan through symbols to
find ELF fields for symbol definitions, but the generic linker doesn't
offer anything better. Might be slow. Anyway, sane people will link
to ELF output then objcopy to convert formats.
* elf64-ppc.c (abiversion, set_abiversion): Move earlier.
(ppc64_elf_branch_reloc): Adjust addend for ELFv2 local offset.
(ppc64_elf_set_toc): Set ".TOC." symbol value when using
generic linker.
(ppc64_elf_relocate_section): Disable ELFv2 function entry
optimisation when --traditional-format.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
This constifies the parameters to search_symbols and fixes up the
fallout.
Tested by rebuilding.
2014-06-30 Tom Tromey <tromey@redhat.com>
* symtab.c (operator_chars): Make parameters and return type
const.
(file_matches): Make "files" const.
(struct search_symbols_data) <files>: Now const.
(search_symbols): Make "regexp" and "files" parameters const.
Update.
(symtab_symbol_info): Remove cast.
(rbreak_command): Update.
* symtab.h (search_symbols): Update.
The test case "watchpoint-reuse-slot.exp" yields a lot of failures on
s390/s390x: all instances of awatch, rwatch, and hbreak are performed
even though they aren't supported on these targets. This is because
the test case ignores non-support error messages when probing for
support of these commands, like:
(gdb) rwatch buf.byte[0]
Target does not support this type of hardware watchpoint.
The patch adds handling for this case in the appropriate
gdb_test_multiple invocations.
gdb/testsuite/
* gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
target lacks support for awatch, rwatch, or hbreak.
* config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
(obj_mach_o_frob_label): Avoid cascading errors.
(obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
This is a trivial patch to make error_no_arg take a const argument.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-cmds.c (error_no_arg): Make "why" const.
* command.h (error_no_arg): Update.
This changes do_set_command and do_show_command to take const
arguments.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-setshow.c (do_set_command): Make "arg" const.
(do_show_command): Make "arg" const.
* cli/cli-setshow.h (do_set_command, do_show_command): Update.
This makes arguments to to_get_bookmark and to_goto_bookmark const and
fixes the fallout. Tested by rebuilding. The only thing of note is
the new split between cmd_record_goto and record_goto -- basically
separating the CLI function from a new internal API, to allow const
propagation.
2014-06-26 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_get_bookmark): Make "args" const.
(record_full_goto_bookmark): Make "raw_bookmark" const.
* record.c (record_goto): New function.
(cmd_record_goto): Use it. Now static.
* record.h (record_goto): Declare.
(cmd_record_goto): Remove declaration.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_get_bookmark,
to_goto_bookmark>: Make parameter const.
This makes the argument to the target_ops to_load method "const", and
fixes up the fallout. Tested by rebuilding all the affected files.
2014-06-26 Tom Tromey <tromey@redhat.com>
* defs.h (generic_load): Update.
* m32r-rom.c (m32r_load_gen): Make "filename" const.
* monitor.c (monitor_load): Make "args" const.
* remote-m32r-sdi.c (m32r_load): Make "args" const.
* remote-mips.c (mips_load_srec, pmon_load_fast): Make "args"
const.
(mips_load): Make "file" const.
* remote-sim.c (gdbsim_load): Make "args" const.
* remote.c (remote_load): Make "name" const.
* symfile.c (generic_load): Make "args" const.
* target-delegates.c: Rebuild.
* target.c (target_load): Make "arg" const.
(debug_to_load): Make "args" const.
* target.h (struct target_ops) <to_load>: Make parameter const.
(target_load): Update.
This fixes a regression that Jan pointed out.
The bug is that some names were allocated by dwarf2read on the objfile
obstack, but then passed to SYMBOL_SET_NAMES with copy_name=0. This
violates the invariant that the names must have a lifetime tied to the
lifetime of the BFD.
The fix is to allocate names on the per-BFD obstack.
I looked at all callers, direct or indirect, of SYMBOL_SET_NAMES that
pass copy_name=0. Note that only the ELF and DWARF readers do this;
other symbol readers were never updated (and perhaps cannot be,
depending on the details of the formats). This is why the patch is
relatively small.
Built and regtested on x86-64 Fedora 20.
2014-06-26 Tom Tromey <tromey@redhat.com>
PR symtab/16902:
* dwarf2read.c (fixup_go_packaging, dwarf2_compute_name)
(dwarf2_physname, read_partial_die)
(guess_partial_die_structure_name, fixup_partial_die)
(guess_full_die_structure_name, anonymous_struct_prefix)
(dwarf2_name): Use per-BFD obstack.
* strings.c: Add -w/--include-all-whitespace option to include any
whitespace character in the displayed strings.
* NEWS: Mention the new feature.
* doc/binutils.texi (strings): Document the new command line
option.
inserted. This is for compatibility with other, non-GNU tools. Deterministic
binaries can still be created by using the new --no-insert-timestamp command line
option.
* emultempl/pe.em: Initialise insert_timestamp to true.
Add a --no-insert-timestamp command line option.
* emultempl/pep.em: Likewise.
* ld.texinfo: Document that --insert-timestamp is enabled by
default and that it now has an inverse command line option.
* NEWS: Mention the new behaviour.
dummy_frame_sniffer has two local variables dummyframe and this_id,
but they are only used in the if block below. This patch is to move
them into the inner block.
gdb:
2014-06-26 Yao Qi <yao@codesourcery.com>
* dummy-frame.c (dummy_frame_sniffer): Move local variables
dummyframe and this_id into inner block below.
information, specifically a DW_AT_MIPS_linkage_name attribute that has a numeric
value rather than a string value.
PR binutils/16949
* dwarf2.c (is_str_attr): New function.
(find_abstract_instance_name): Use it to determine when an
attribute has a string value.
When I read the code, I happen to see this:
signal_pass = (unsigned char *)
xmalloc (sizeof (signal_program[0]) * numsigs);
^^^^^^^^^^^^^^
It is a typo, and this patch is to fix it.
gdb:
2014-06-26 Yao Qi <yao@codesourcery.com>
* infrun.c (_initialize_infrun): Replace "signal_program[0]"
with "signal_pass[0]" in the initialization of signal_pass.
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
Addition of DF_STATIC_TLS in eea6dad2 results in the addition of
flags to the dynamic section, which in turn changes these addresses.
Fix them up to match their new positions.
ld/testsuite/Changelog:
2014-06-24 Kyle McMartin <kyle@redhat.com>
* ld-arm/tls-gdierelax2.d: Fix expected offsets.
When generating a core file using the "generate-core-file" command while
replaying with the btrace record target, we won't be able to access all
registers and all memory. This leads to the following assertion:
gdb/regcache.c:1034: internal-error: regcache_raw_supply: Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.btrace/gcore.exp: generate-core-file core (GDB internal error)
Resyncing due to internal error.
Pretend that we are not replaying while generating a core file. This will
forward fetch and store registers as well as xfer memory calls to the target
beneath.
gdb/
* record-btrace.c (record_btrace_generating_corefile)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): New.
(record_btrace_xfer_partial, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store):
Forward request when generating a core file.
(record_btrace_open): Set record_btrace_generating_corefile to zero.
(init_record_btrace_ops): Set to_prepare_to_generate_core and
to_done_generating_core.
testsuite/
* gdb.btrace/gcore.exp: New.
Add new target functions to_prepare_to_generate_core and
to_done_generating_core that are called before and after generating a core
file, respectively.
This allows targets to prepare for core file generation and to clean up
afterwards.
gdb/
* target.h (target_ops) <to_prepare_to_generate_core>
<to_done_generating_core>: New.
(target_prepare_to_generate_core, target_done_generating_core): New.
* target.c (target_prepare_to_generate_core)
(target_done_generating_core): New.
* target-delegates.c: Regenerate.
* gcore.c: (write_gcore_file): Rename to ...
(write_gcore_file_1): ...this.
(write_gcore_file): Call target_prepare_to_generate_core
and target_done_generating_core.
The various make_corefile_notes implementations for gdbarch as well as target
currently make an xfree cleanup on the data they return. This causes problems
when trying to put a TRY_CATCH around the make_corefile_notes call.
Specifically, we get a stale cleanup error in restore_my_cleanups.
Omit the make_cleanup and have the caller free the memory.
gdb/
* fbsd-nat.c (fbsd_make_corefile_notes): Remove make_cleanup call.
* gcore.c (write_gcore_file): Free memory returned from
make_corefile_notes.
* linux-tdep.c (linux_make_corefile_notes): Remove make_cleanup call.
* procfs.c (procfs_make_note_section): Remove make_cleanup call.
Prior to 93d1b056 _SDA_BASE_ used to be defined in a linker script
output section. Now _SDA_BASE_ is defined in an input section that is
subject to being stripped. If the section is stripped we don't output
the symbol, which results in --emit-relocs trying to emit relocs with
dangling references to _SDA_BASE_.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Arrange to keep
.sdata/.sdata2 when _SDA_BASE_/_SDA2_BASE_ should be output
for --emit-relocs.
In arm-tdep.c, arm_skip_stub is installed to gdbarch
skip_trampoline_code, but in arm-linux-tdep.c,
find_solib_trampoline_target is installed to skip_trampoline_code.
That means gdb configured for arm-linux target doesn't recognize some
arm specific trampolines or stubs. Beside handling generic solib
trampoline, gdb for arm-linux target should be able to handle arm
specific trampolines. This patch is to skip arm specific stubs, if
any, and as a fallback, skip the generic solib trampoline.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-linux-tdep.c (arm_linux_skip_trampoline_code): New.
(arm_linux_init_abi): Set skip_trampoline_code with
gdbarch_skip_trampoline_code instead of
find_solib_trampoline_target.
In target arm-none-eabi, prologue unwinder is used for trampoline
'bx reg'. However, in target arm-linux, exidx unwinder is selected for
trampoline at first, which is not expected. The main function and the
trampoline is,
0x00009dfc <main+0>: push {r4, r5, r6, r7, lr}
......
0x0000ac30 <main+3636>: ldrdeq r3, [r1], -r8
0x0000ac34: bx r2
0x0000ac36: bx r4
and .ARM.exidx is:
0x9dfc <main>: @0xb404
Compact model index: 1
0x97 vsp = r7
0x20 vsp = vsp + 132
0x3f vsp = vsp + 256
0x80 0xf0 pop {r8, r9, r10, r11}
0xab pop {r4, r5, r6, r7, r14}
0xac38 <__aeabi_drsub>: 0x1 [cantunwind]
Trampolines 'bx r2' and 'bx r4' doesn't belong to main, but the exidx
for main is still selected form them because there is no end address
of each exidx entry.
Instead of teaching exidx unwinder ignore this trampoline (which looks
complicated and error prone), I decide to let stub unwinder to handle
trampoline, because stub undwinder is installed before exidx unwinder,
and this trampoline can be regarded as a stub too.
This patch is to add the code to match 'bx reg' trampoline in the
sniffer of stub unwinder.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_stub_unwind_sniffer): Return 1 if
arm_skip_bx_reg returns non-zero.
After this patch
<https://gcc.gnu.org/ml/gcc-patches/2005-01/msg00813.html> applied to
GCC, a new trampoline is generated but GDB doesn't recognize it. This
patch is to teach GDB to understand this trampoline. See details
about this trampoline and the heuristics in the comments.
gdb:
2014-06-24 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_skip_bx_reg): New function.
(arm_skip_stub): Call arm_skip_bx_reg.
This patch fixes this on x86 Linux:
(gdb) watch *buf@2
Hardware watchpoint 8: *buf@2
(gdb) si
0x00000000004005a7 34 for (i = 0; i < 100000; i++); /* stepi line */
(gdb) del
Delete all breakpoints? (y or n) y
(gdb) watch *(buf+1)@1
Hardware watchpoint 9: *(buf+1)@1
(gdb) si
0x00000000004005a7 in main () at ../../../src/gdb/testsuite/gdb.base/watchpoint-reuse-slot.c:34
34 for (i = 0; i < 100000; i++); /* stepi line */
Couldn't write debug register: Invalid argument.
(gdb)
In the example above the debug registers are being switched from this
state:
CONTROL (DR7): 0000000000050101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601040, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
to this:
CONTROL (DR7): 0000000000010101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601041, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
That is, before, DR7 was setup for watching a 2 byte region starting
at what's in DR0 (0x601040).
And after, DR7 is setup for watching a 1 byte region starting at
what's in DR0 (0x601041).
We always write DR0..DR3 before DR7, because if we enable a slot's
bits in DR7, you need to have already written the corresponding
DR0..DR3 registers -- the kernel rejects the DR7 write with EINVAL
otherwise.
The error shown above is the opposite scenario. When we try to write
0x601041 to DR0, DR7's bits still indicate intent of watching a 2-byte
region. That DR0/DR7 combination is invalid, because 0x601041 is
unaligned. To watch two bytes, we'd have to use two slots. So the
kernel errors out with EINVAL.
Fix this by always first clearing DR7, then writing DR0..DR3, and then
setting DR7's bits.
A little optimization -- if we're disabling the last watchpoint, then
we can clear DR7 just once. The changes to nat/i386-dregs.c make that
easier to detect, and as bonus, they make it a little easier to make
sense of DR7 in the debug logs, as we no longer need to remember we're
seeing stale bits.
Tested on x86_64 Fedora 20, native and GDBserver.
This adds an exhaustive test that switches between many different
combinations of watchpoint types and addresses and widths.
gdb/
2014-06-23 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_prepare_to_resume): Clear
DR_CONTROL before setting DR0..DR3.
* i386-linux-nat.c (i386_linux_prepare_to_resume): Likewise.
* nat/i386-dregs.c (i386_remove_aligned_watchpoint): Clear all
bits of DR_CONTROL related to the debug register slot being
disabled. If all slots are vacant, clear local slowdown as well,
and assert DR_CONTROL is 0.
gdb/gdbserver/
2014-06-23 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_linux_prepare_to_resume): Clear DR_CONTROL
before setting DR0..DR3.
gdb/testsuite/
2014-06-23 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-reuse-slot.c: New file.
* gdb.base/watchpoint-reuse-slot.exp: New file.
Currently, the xmethod commands lookup xmethod matchers in the current
progspace even if the locus regular expression matches the progspace's
filename. Pretty printer commands do not match the current progspace's
filename.
gdb/
* python/lib/gdb/command/xmethods.py
(get_method_matchers_in_loci): Lookup xmethod matchers in the
current progspace only if the string "progspace" matches LOCUS_RE.
gdb/testsuite
* gdb.python/py-xmethods.exp: Use "progspace" instead of the
progspace's filename in 'info', 'enable' and 'disable' command
tests.
On x86_64 with -m32 or on i686 it will:
Running ./gdb.arch/amd64-stap-special-operands.exp ...
gdb compile failed, amd64-stap-triplet.c: Assembler messages:
amd64-stap-triplet.c:35: Error: bad register name `%rbp'
amd64-stap-triplet.c:38: Error: bad register name `%rsp'
amd64-stap-triplet.c:40: Error: bad register name `%rbp)'
amd64-stap-triplet.c:41: Error: bad register name `%rsi'
amd64-stap-triplet.c:42: Error: bad register name `%rbp)'
/tmp/ccjOdmpl.s:63: Error: bad register name `%rbp'
2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
* gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
Message-ID: <20140622211401.GA3716@host2.jankratochvil.net>
