This patch moves a couple of write-after-approval names up to keep
the list in alphabetical order.
2010-07-27 Joel Brobecker <brobecker@adacore.com>
* MAINTAINERS (Write After Approval): Reorder a couple of entries.
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add lm32 target.
* Makefile.in: Add lm32 dependencies.
* NEWS: Indicate lm32 is a new target.
* configure.tgt: Add lm32 targets.
* lm32-tdep.c: New file.
gdb/testsuite
2009-05-18 Jon Beniston <jon@beniston.com>
* gdb.asm/asm-source.exp: Add lm32 target.
include/gdb/
2009-05-18 Jon Beniston <jon@beniston.com>
* sim-lm32.h: New file.
sim/
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
* configure.ac: Add lm32 target.
* lm32: New directory.
sim/common
2009-05-18 Jon Beniston <jon@beniston.com>
* gennltvals.sh: Add lm32 target.
* nltvals.def: Add lm32 syscall definitions.
sim/lm32/
2009-05-18 Jon Beniston <jon@beniston.com>
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
* config.in, configure: Regenerate.
* dwarf2read.c: Include zlib.h if present.
Modified *_SECTION macros.
(section_is_p): New.
(dwarf2_locate_sections): Use section_is_p instead of strcmp
(dwarf2_resize_section): New.
to determine whether a given section has a given name.
(zlib_decompress_section): New.
(dwarf2_read_section): Read the compressed section if present
in the binary.
* testsuite/gdb.dwarf2/dw2-compressed.S: New file.
* testsuite/gdb.dwarf2/dw2-compressed.exp: New file.
* MAINTAINERS: Added myself to section Write After Approval.
2007-01-10 Jim Blandy <jimb@codesourcery.com>
* MAINTAINERS (Global Maintainers): Ulrich Weigand has accepted
the Global Maintainers' invitation to be a global maintainer.
2006-05-16 Jim Blandy <jimb@codesourcery.com>
* MAINTAINERS (Authorized Committers): Gaius Mulley has accepted
the Global Maintainers' invitation to be an authorized committer
for the Modula-2 support.
* gdb/m2-lang.h: added function extern prototypes for m2_is_long_set
and get_long_set_bounds.
* gm2/m2-typeprint.c: This file has been completely
replaced to reflect the Modula-2 syntax rather than call the
c_print_type function.
(m2_print_type): walk the Modula-2 type tree.
(m2_type_name): added.
(m2_range): added.
(m2_typedef): added.
(m2_array): added.
(m2_pointer): added.
(m2_ref): added.
(m2_unknown): added.
(m2_union): added.
(m2_procedure): added.
(m2_print_bounds): added.
(m2_short_set): added.
(m2_is_long_set): added.
(m2_get_discrete_bounds): added.
(m2_is_long_set_of_type): added.
(m2_long_set): added.
(m2_record_fields): added.
(m2_enum): added.
* gdb/dwarf2read.c: added ability to detect the language Modula-2
and handle SET and CHAR types.
(read_set_type): added.
(process_die): call read_set_type.
(read_base_type): modifed signed/unsigned char handling for Modula-2.
(set_cu_language): added Modula-2 case clause.
* gdb/m2-valprint.c: complete replacement so that Modula-2 values are
printed rather than call the C language routines.
(print_function_pointer_address): added.
(get_long_set_bounds): added.
(m2_print_long_set): added.
(print_unpacked_pointer): added.
(print_variable_at_address): added.
(m2_val_print): replaced.
* 2006-03-22 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* configure.tgt (m32c-*-*): New entry.
* config/m32c/m32c.mt: New file.
* m32c-tdep.c: New file.
* Makefile.in (elf_m32c_h): New variable.
(m32c-tdep.o): New rule.
* NEWS: Mention new target.
* MAINTAINERS: Designate Jim Blandy as responsible maintainer.
a note to Past Maintainers. Move unresponsive or inactive
maintainers to Authorized Committers or Past Maintainers as
appropriate. Correct Jim Kingdon's email address. Remove
vacant areas of responsibility.
* MAINTAINERS (Can Commit Without Approval): New section,
previously burried under "Target Instruction Set Architectures".
Note that cagney "can commit" changes to powerpc-linux.
* Makefile.in: Re-add v850-tdep.o dependencies.
* configure.tgt: Re-add v850.
* v850-tdep.c: Reorder code slightly. Add register number enumerator.
(struct v850_frame_cache): New structure.
(v850_processor_type_table): Remove. Move functionality into
v850_register_name, v850e_register_name and v850_gdbarch_init.
(v850_register_name): New function.
(v850e_register_name): New function.
(struct prologue_info): Remove definition.
(v850_register_type): New function.
(v850_type_is_scalar): New function.
(v850_use_struct_convention): Align to gcc behaviour.
(v850_handle_prepare): Renamed from handle_prepare. Change third
parameter to struct v850_frame_cache *.
(v850_handle_pushm): Renamed from handle_pushm. Change third parameter
to struct v850_frame_cache *.
(v850_is_save_register): New function to evaluate if a register is
caller-save.
(v850_analyze_prologue): Replace v850_scan_prologue. Change to support
new frame code.
(v850_init_extra_frame_info): Remove.
(v850_frame_chain): Remove.
(v850_find_callers_reg): Remove.
(v850_skip_prologue): Make static.
(v850_pop_frame): Remove.
(v850_frame_align): New function.
(v850_push_dummy_call): Replace v850_push_arguments.
(v850_push_return_address): Remove.
(v850_extract_return_value): New function.
(v850_store_return_value): New function.
(v850_return_value): New function.
(v850_frame_saved_pc): Remove.
(v850_breakpoint_from_pc): New function.
(v850_alloc_frame_cache): New function.
(v850_fix_call_dummy): Remove.
(v850_frame_cache): New function.
(v850_target_architecture_hook): Remove.
(v850_frame_prev_register): New function.
(v850_frame_this_id): New function.
(v850_frame_unwind): New structure.
(v850_frame_sniffer): New function.
(v850_unwind_sp): New function.
(v850_unwind_pc): New function.
(v850_unwind_dummy_id): New function.
(v850_frame_base_address): New function.
(v850_frame_base): New structure.
(v850_gdbarch_init): New function.
* config/v850/v850.mt: Undelete. Drop TM_FILE.
* Makefile.in: Re-add h8300-tdep.o dependencies.
* h8300-tdep.c: Slightly rearrange type definitions and functions.
(struct frame_extra_info): Remove.
(struct h8300_frame_cache): Replace locals with differently defined
uses_fp member.
(h8300_unwind_pc): Simplify.
(h8300_unwind_sp): New function.
(h8300_unwind_dummy_id): Simplify.
(h8300_init_frame_cache): New function.
(h8300_is_argument_spill): Use reworked defines for opcode scanning.
(h8300_skip_prologue): Rewrite.
(h8300_alloc_frame_cache): Remove.
(h8300_analyze_frame_setup): Remove.
(h8300_analyze_register_saves): Remove.
(h8300_analyze_prologue): Rewrite.
(h8300_frame_cache): Use h8300_init_frame_cache instead of
h8300_alloc_frame_cache. Use BINWORD instead of constant 4 to
accomodate 16 bit mode. Fix saved_sp and register offset evaluation.
(h8300_frame_this_id): Correctly calculate this_id using saved stack
pointer instead of base.
(h8300_frame_prev_register): Drop needless braces.
(h8300_frame_base_address): New function.
(h8300_frame_base): New frame_base.
(h8300_push_dummy_call): Return correct CFA value.
(h8300h_extract_return_value): Fix 8 byte value handling.
(h8300_use_struct_convention): New function.
(h8300h_use_struct_convention): New function.
(h8300h_store_return_value): Fix 8 byte value handling.
(h8300_return_value): New function.
(h8300h_return_value): New function.
(h8300_extract_struct_value_address): Remove deprecated functionality.
(h8300_push_dummy_code): Remove.
(h8300_gdbarch_init): Replace set_gdbarch_extract_return_value and
set_gdbarch_store_return_value calls by set_gdbarch_return_value.
Remove calls to set_gdbarch_deprecated_fp_regnum,
set_gdbarch_deprecated_extract_struct_value_address,
set_gdbarch_deprecated_use_struct_convention and
set_gdbarch_push_dummy_code.
Add calls to set_gdbarch_unwind_sp and frame_base_set_default.
Slightly rearrange code.
