opcodes/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (print_insn_sparc): Handle the privileged register
%pmcdper.
gas/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (priv_reg_table): New privileged register
%pmcdper.
gas/testsuite/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* gas/sparc/wrpr.s: Test writing to the privileged %pmcdper
register.
* gas/sparc/wrpr.d: ...and the expected result.
* gas/sparc/rdpr.s: Test reading from the privileged %pmcdper
register.
* gas/sparc/rdpr.d: ...and the expected result.
_start:
.byte 0f-_start
0:
Fixes
..:2: Error: floating point number invalid
..:2: Error: junk at end of line, first unrecognized character is `_'
* expr.c (operand): Rewrite handling of operands starting with "0f".
If atof_generic only parses "-" or "+", treat as expression.
* expr.c (integer_constant): Return O_absent expression if eol.
(operand): For targets with both LOCAL_LABELS_FB and
NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary
digits as a local label reference. Correct handling of 0b prefix.
If a suffix is not allowed, error on 0B.
Auto-litpools is the automated version of text-section-literals: literal
pool candidate frags are planted every N frags and during relaxation
they are turned into actual literal pools where literals are moved to
become reachable for their first reference by L32R instruction.
2015-08-12 David Weatherford <weath@cadence.com>
gas/
* config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
New structures.
(xtensa_maybe_create_literal_pool_frag): New function.
(litpool_seg_list, auto_litpools, auto_litpool_limit)
(litpool_buf, litpool_slotbuf): New static variables.
(option_auto_litpools, option_no_auto_litpools)
(option_auto_litpool_limit): New enum identifiers.
(md_longopts): Add entries for auto-litpools, no-auto-litpools
and auto-litpool-limit.
(md_parse_option): Handle option_auto_litpools,
option_no_auto_litpools and option_auto_litpool_limit.
(md_show_usage): Add help for --[no-]auto-litpools and
--auto-litpool-limit.
(xtensa_mark_literal_pool_location): Record a place for literal
pool with a call to xtensa_maybe_create_literal_pool_frag.
(get_literal_pool_location): Find highest priority literal pool
or convert candidate to literal pool when auto-litpools are used.
(xg_assemble_vliw_tokens): Create literal pool after jump
instruction.
(xtensa_check_frag_count): Create candidate literal pool every
auto_litpool_limit frags.
(xtensa_relax_frag): Add jump around literals to non-empty
literal pool.
(xtensa_move_literals): Estimate literal pool addresses and move
unreachable literals closer to their users, converting candidate
to literal pool if needed.
(xtensa_switch_to_non_abs_literal_fragment): Only emit error
about missing .literal_position in case auto-litpools are not
used.
* config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
* doc/as.texinfo (Xtensa options): Document --auto-litpools and
--no-auto-litpools options.
* doc/c-xtensa.texi (Xtensa options): Likewise.
2015-08-12 Max Filippov <jcmvbkbc@gmail.com>
gas/testsuite/
* gas/xtensa/all.exp: Add auto-litpools to the list of xtensa
tests.
* gas/xtensa/auto-litpools.s: New file: auto-litpools test.
* gas/xtensa/auto-litpools.s: New file: auto-litpools test
result pattern.
PR gas/18765
* config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
compile time warnings about constant expressions being shifted
into bit 31.
(do_iwmmxt_wldstd): Likewise.
(do_iwmmxt_wrwrwr_or_imm5): Likewise.
(md_assemble): Likewise.
gas * config/tc-rl78.c (rl78_abs_sym): New local variable.
(md_begin): Initialise the new symbol.
(OPIMM): Define the value to be relative to the new symbol and not
the absolute section symbol.
ld * emulparams/elf32rl78.sh (OTHER_SECTIONS): Provide a value for
the _-rl78_abs__ symbol.
tests * gas/all/struct.d: Allow for extra symbols in the output.
* gas/macros/test1.d: Likewise.
* gas/elf/elf.exp: Add an rl78 machine.
* gas/elf/sections2e-rl78: New file.
tests * binutils-all/localize-hidden-1.d: Allow for extra symbols in the
output.
* binutils-all/strip-11.d: Skip for the RL78.
This fixes a segfault when macro definitions end on the last line of a
file, and that line isn't properly terminated with a newline. gas
used to throw away the last line in cases like this, whereas in other
cases gas added the missing newline. So I've also made gas
consistently provide a missing newline.
PR gas/18687
* input-scrub.c (input_scrub_next_buffer): Rearrange and simplify
loop. Don't drop lines at end of file lacking a newline, add a
newline instead. Ensure partial_size is zero whenever
partial_where is NULL. Adjust buffer size for extra char.
(input_scrub_push, input_scrub_begin): Adjust buffer size here too.
The default compression is gABI compliant now. This patch makes the
x86 Linux assembler default to gABI compliant.
* config/tc-i386.c (flag_compress_debug): Replace
COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
When generating relocation (tc_gen_reloc) 32 bit relocation fixup
is changed to new 32 bit PC relative relocation if the fixup has pc-relative
flag set.
bfd/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf32-avr.c: Add 32 bit PC relative relocation for AVR target.
gas/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
32 bit PC relative and update offset if the fixup is pc-relative.
* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
relocs.
gas/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* gas/avr/pc-relative-reloc.d: New test for 32 bit pc relative reloc.
* gas/avr/per-function-debugline.s: New test source.
include/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf/avr.h: Add new 32 bit PC relative relocation.
ld/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* ld-avr/gc-section-debugline.d: New test.
* ld-avr/per-function-debugline.s: Source for new test.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
Commit 2f0c68f23b added an extra @section
.cfi_lsda:
@subsection @code{.cfi_lsda @var{encoding} [, @var{exp}]}
+@section @code{.cfi_lsda @var{encoding} [, @var{exp}]}
@code{.cfi_lsda} defines LSDA and its encoding.
It shouldn't be there.
* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
PR gas/18541
gas * config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
mode against a nearby symbol.
tests * gas/arm/thumb.s: Add test of ADR against a nearby symbol.
* gas/arm/thumb.d: Update expected output.
* gas/arm/thumb-eabi.d: Likewise.
PR gas/18481
bfd * elf32-arm.c (R_ARM_TLS_LE32): Set the special function to NULL.
gas * config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
in the same case as BFD_RELOC_ARM_TLS_IS32.
tests * gas/arm/tls.s: Add tests of the tpoff pseudo with a local
symbol.
* gas/arm/tls.d: Update expected output.
* config/tc-arm.c (is_double_a_single): Make conditional upon the
availablity of a 64-bit type. Use this type for the argument and
mantissa.
(double_to_single): Likewise.
* config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
the constant value, if available. Generate a 64-bit value from a
bignum if supported. Only perform the second optimization for
PR 18500 if the 64-bit type is available.
PR gas/18499
gas * config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
to MOV.w or MVN.w for Thumb2.
tests * gas/arm/thumb2_ldr_immediate_armv6.s: New test case.
* gas/arm/thumb2_ldr_immediate_armv6.d: Expected disassembly.
* gas/arm/thumb2_ldr_immediate_armv6t2.s: New test case.
* gas/arm/thumb2_ldr_immediate_armv6t2.d: Expected disassembly.
PR gas/18500
gas * config/tc-arm.c (is_double_a_single): New function.
(double_to_single): New function.
(move_or_literal_pool): Add support for converting VLDR to VMOV.
tests * gas/arm/vfpv2-ldr_immediate.s: New test case.
* gas/arm/vfpv2-ldr_immediate.d: Expected disassembly.
* gas/arm/vfpv3-ldr_immediate.s: New test case.
* gas/arm/vfpv3-ldr_immediate.d: Expected disassembly.
* gas/arm/vfpv3xd-ldr_immediate.s: New test case.
* gas/arm/vfpv3xd-ldr_immediate.d: Expected disassembly.
This patch adds the ability to automatically construct a section name
based on the prior section.
When gas is invoked with --sectname-subst, the occurrence of %S in a
section name will be substituted by the name of the current section. For
example:
.macro exception_code
.pushsection %S.exception
[exception code here]
.popsection
.endm
.text
[code]
exception_code
[...]
.section .init
[init code]
exception_code
[...]
The first and second exception_code invocations create the
.text.exception and the .init.exception sections respectively. This is
useful e.g. to discriminate between anciliary sections that are tied to
.init code and can be discarded at run time when initialization is over
vs anciliary sections tied to .text sections that need to stay resident.
* as.c (show_usage): Document --sectname-subst.
(parse_args): Add --sectname-subst.
* as.h (flag_sectname_subst): New.
* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
* doc/as.texinfo: Document it.
